mirror of
https://gitee.com/xiaohuolufeihua/bizhang_-obav.git
synced 2026-05-21 01:12:11 +00:00
de4f594937
The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
37 lines
734 B
Plaintext
37 lines
734 B
Plaintext
uorb start
|
|
qshell start
|
|
param set SYS_AUTOSTART 4001
|
|
param set MAV_TYPE 2
|
|
param set MC_YAW_P 12
|
|
param set MC_YAWRATE_P 0.08
|
|
param set MC_YAWRATE_I 0.0
|
|
param set MC_YAWRATE_D 0
|
|
param set MC_PITCH_P 7.0
|
|
param set MC_PITCHRATE_P 0.08
|
|
param set MC_PITCHRATE_I 0.0
|
|
param set MC_PITCHRATE_D 0.001
|
|
param set MC_ROLL_P 7.0
|
|
param set MC_ROLLRATE_P 0.08
|
|
param set MC_ROLLRATE_I 0.0
|
|
param set MC_ROLLRATE_D 0.001
|
|
param set SENS_BOARD_ROT 0
|
|
|
|
|
|
sleep 1
|
|
mpu9250 start
|
|
bmp280 start
|
|
gps start -d /dev/tty-4
|
|
rc_update start
|
|
sensors start
|
|
commander start
|
|
ekf2 start
|
|
land_detector start multicopter
|
|
mc_pos_control start
|
|
mc_att_control start
|
|
mc_rate_control start
|
|
uart_esc start -D /dev/tty-2
|
|
spektrum_rc start -d /dev/tty-1
|
|
sleep 1
|
|
list_files
|
|
list_tasks
|