mirror of
https://gitee.com/xiaohuolufeihua/bizhang_-obav.git
synced 2026-05-22 01:12:31 +00:00
d5eab23f53
In day to day practice, there are two reasons for fabsf(airspeed.differential_pressure_filtered_pa) > 15.0f
1/ The sensor has not been calibrated. In this case, the sensor needs to be calibrated.
2/ It's a windy day, and the operator has powered up the system without covering the pitot tube. In that case, you need to reboot with the pitot cover in place.
The original message ('Check calibration') is ok, but why not be more direct? The user does not have to "check the calibration" - the user has to (a) either calibrate the system in the first place, or (b) not forget the pitot tube cover when powering up the system.
PX4 Pro Drone Autopilot
This repository holds the PX4 Pro flight control solution for drones, with the main applications located in the src/modules directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
- Official Website: http://px4.io (License: BSD 3-clause, LICENSE.md)
- Supported airframes:
- Multicopters
- Fixed wing
- VTOL
- many more experimental types (Rovers, Blimps, Boats, Submarines, etc)
- Releases: Downloads
Please refer to the user documentation and user forum for flying drones with the PX4 flight stack.
Weekly Dev Call
The PX4 Dev Team syncs up on a weekly dev call.
- Wednesday 17:00 Central European Time, 11:00 Eastern Time, 08:00 Pacific Standard Time
- Uber conference (dial-in or web client)
- The agenda is announced in advance on the PX4 Discuss
- Issues and PRs may be labelled devcall to flag them for discussion
Developers
Maintenance Team
- Project / Founder - Lorenz Meier
- Dev Call - Ramon Roche
- Communication Architecture
- UI / UX
- Multicopter Flight Control
- VTOL Flight Control
- Fixed Wing Flight Control
- Racers - Matthias Grob
- OS / drivers - David Sidrane
- UAVCAN / Industrial - Pavel Kirienko
- State Estimation - James Goppert, Paul Riseborough
- Vision based navigation
- Obstacle Avoidance - Vilhjalmur Vilhjalmsson
- Snapdragon
- Intel Aero
- Raspberry Pi / Navio - Beat Kueng
- Parrot Bebop - Michael Schaeuble
- Airmind MindPX / MindRacer - Henry Zhang
Supported Hardware
This repository contains code supporting these boards:
- Snapdragon Flight
- Intel Aero
- Raspberry PI with Navio 2
- Parrot Bebop 2
- FMUv1.x
- FMUv2.x
- FMUv3.x Pixhawk 2
- FMUv4.x
- Pixracer
- Pixhawk 3 Pro
- FMUv5.x (ARM Cortex M7, future Pixhawk)
- STM32F4Discovery (basic support) Tutorial
- Gumstix AeroCore (v1 and v2)
- Airmind MindPX V2.8
- Airmind MindRacer V1.2
- Bitcraze Crazyflie 2.0
Project Milestones
The PX4 software and Pixhawk hardware (which has been designed for it) has been created in 2011 by Lorenz Meier.