David Sidrane 73bb18a053 px4_fmu-v6x: Limit Slew rate So IMU works with DMA ...

The defualt in NuttX is OSPEED of 50Mhz. This is realy a slew
   rate control. At the default high slew rate the overshoot was
   .7 Volts. On a ICM20649 this was causing the device to output
   garbage. All 0s

   N.B. A passive scope or Logic analyser's probes load will mask
   the failure. Useed a FET probe to verify the issue.

2020-06-02 13:02:51 -04:00

..

bootloader

Added PX4 FmuV6X

2020-06-02 13:02:51 -04:00

include

px4_fmu-v6x: Limit Slew rate So IMU works with DMA

2020-06-02 13:02:51 -04:00

nsh

Added PX4 FmuV6X

2020-06-02 13:02:51 -04:00

scripts

Added PX4 FmuV6X

2020-06-02 13:02:51 -04:00

stackcheck

Added PX4 FmuV6X

2020-06-02 13:02:51 -04:00

Kconfig

Added PX4 FmuV6X

2020-06-02 13:02:51 -04:00