David Sidrane 5018723eb2 board_common:Define defaults for Open circuit max and UV min ...

BOARD_ADC_OPEN_CIRCUIT_V is the voltage present on an ADC due
   to the bias current on the terminition resistor.

   BOARD_VALID_UV is the under voltage min set by resistors on a
   board's Power selector.

   A battery is considered connected when the Voltage measures is
   greater than BOARD_ADC_OPEN_CIRCUIT_V.

   In the case where BOARD_ADC_OPEN_CIRCUIT_V is greater then
   BOARD_VALID_UV we can use the HW to qualify connected.

2017-09-29 10:13:51 -04:00

..

drivers

board_common:Define defaults for Open circuit max and UV min

2017-09-29 10:13:51 -04:00

examples

delete control_state and cleanup vehicle_attitude (#7882)

2017-09-21 16:24:53 -04:00

firmware

UAVCAN bootloaders split into separate repository (#7878)

2017-09-29 10:13:51 -04:00

include

modules remove extra semicolons

2017-09-16 21:29:52 +01:00

lib

NuttX upgrade cmake wrapper (#7873)

2017-09-29 10:13:51 -04:00

modules

battery:Only change the warning level on a connected battery.

2017-09-29 10:13:51 -04:00

platforms

NuttX upgrade cmake wrapper (#7873)

2017-09-29 10:13:51 -04:00

systemcmds

PX4 System: Upstream NuttX defconfig changes

2017-09-29 10:13:51 -04:00