Daniel Agar
fbc8e1b09e
boards: mRo X2.1-777 fixes
...
- ardupilot bootloader compatibility (first 3 sectors)
- clock tree fixes
- start mavlink
- start mpu9250 magnetometer (only onboard mag)
- fixes https://github.com/PX4/Firmware/issues/15466
2020-08-09 14:24:49 -04:00
Daniel Agar
e3d31a881e
boards: NuttX disable posix message queues
2020-07-17 17:00:21 -04:00
Daniel Agar
28d2aca699
boards: include all procfs entries on boards that aren't flash constrained
2020-05-01 20:59:57 -04:00
Daniel Agar
8d0c92003a
boards: remove all CONFIG_NXFONTS_DISABLE*
2020-05-01 20:59:57 -04:00
Daniel Agar
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
...
- increase stack sizes to run cleanly under stackcheck
- this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
- remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
Daniel Agar
40b1043e12
NuttX boards minor lpwork and init stack increases
2020-04-02 23:39:17 -04:00
Daniel Agar
15332a7e56
boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15
2020-04-01 16:17:14 -04:00
Daniel Agar
44bec269b0
boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15
2020-03-25 17:59:22 -04:00
Daniel Agar
8738c26426
boards: enable NuttX SPI DMA buffers
...
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
- remove explicit DMA buffer allocations from new IMU drivers
- restore original BOARD_DMA_ALLOC_POOL_SIZE
- decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
2020-03-22 19:24:26 -04:00
Daniel Agar
0ce9e113ff
boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32
2020-03-11 22:08:37 -04:00
Daniel Agar
8c2ba5f39f
mro_x21-777: add board_dma_map.h and enable SPI1 DMA
2020-03-11 22:08:37 -04:00
Daniel Agar
46a09b711f
boards: increase STDIO buffer size where we can afford it
2020-03-11 17:19:44 -04:00
Daniel Agar
505afc6063
boards: increase LPWORKSTACKSIZE 1536 -> 1600
2020-03-10 12:53:01 -04:00
Beat Küng
d74d094940
nuttx configs: disable nuttx timers which are used for PWM output
...
These are not required, and to be consistent we enforce disabling them now.
2020-02-13 03:49:16 -08:00
Daniel Agar
693d532bba
mRo x2.1 777 board support
2020-01-22 15:02:55 -05:00
