Commit Graph

31 Commits

Author SHA1 Message Date
Daniel Agar
cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar
233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
David Sidrane
4bc698e8e3 omnibus_f4sd: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane
9a19340dc3 omnibus_f4sd Updates for NuttX 9.1.0-
omnibus_f4sd: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
Daniel Agar
2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Daniel Agar
e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar
8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar
66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
2020-04-11 21:16:10 -04:00
Daniel Agar
40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar
15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar
44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Daniel Agar
8738c26426 boards: enable NuttX SPI DMA buffers
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
2020-03-22 19:24:26 -04:00
Daniel Agar
0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Daniel Agar
505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng
977b80cee9 omnibus: enable DMA on SPI2 (SD Card)
Reduces CPU load by ~10%, and allows to comfortably run the rate loop at
2kHz.
2020-03-09 12:47:43 +01:00
Beat Küng
77b854b7c3 omnibus: enable SPI dma + use new ICM-20602 driver (disabled DLPF) 2020-02-25 09:59:52 +01:00
Beat Küng
d74d094940 nuttx configs: disable nuttx timers which are used for PWM output
These are not required, and to be consistent we enforce disabling them now.
2020-02-13 03:49:16 -08:00
Daniel Agar
99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00
David Sidrane
8b33d1fcda omnibus:f4sd BSP Updated to NuttX 8.1+ 2019-11-16 11:43:42 +01:00
Beat Küng
ac82c5114b omnibusf4sd: add dshot timer config 2019-10-11 08:14:17 +02:00
Daniel Agar
0955fd2d58 NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20 2019-08-07 21:23:27 -04:00
Daniel Agar
5421ef5535 NuttX increase HPWORK and LPWORK stack by 256 bytes 2019-08-06 23:15:07 -04:00
Daniel Agar
9d701a077d NuttX reduce stack for interrupts, HPWORK, LPWORK 2019-08-06 11:00:55 -04:00
Daniel Agar
dc10a68539 NuttX and apps update 7.29 2019-07-10 12:58:35 -04:00
Beat Küng
d9f8e37288 omnibus: use default clock rate of 20 MHz for SD card (CONFIG_MMCSD_SPICLOCK)
With 24 MHz accesses to the SD card were unreliable. And the chance of
failure recently got worse, so that logging became impossible.
2019-04-08 10:44:30 +02:00
Daniel Agar
be93dd1c5d omnibus_f4sd nsh compress defconfig 2019-03-21 08:41:01 -04:00
David Sidrane
edd9f91a19 board:Set larger stack margin 2019-03-01 23:45:48 -05:00
David Sidrane
b478719079 omnibus_f4sd:Fully remove console 2019-01-25 06:32:37 -08:00
David Sidrane
3032643a0c omnibus_f4sd: Inital commit NuttX 7.27+ 2019-01-25 06:32:37 -08:00
Daniel Agar
abb3817d31 boards new split VENDOR_MODEL naming convention 2018-11-26 14:40:14 -08:00
Daniel Agar
f692ad04d0 boards organization 2018-11-26 14:40:14 -08:00