yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-22 01:12:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
32,546 Commits 2 Branches 0 Tags
82b87adfb3efe0c8785a355c7b1697d2d88a6f44
Commit Graph

384 Commits

Author SHA1 Message Date
David Sidrane
82b87adfb3 px4_fmu-v6x:default phy is LAN8742 2020-06-09 08:14:22 +02:00
David Sidrane
0bb8d7a065 px4_fmu-v5x p4 (-06) default to suporting LAN8742Ai 2020-06-09 08:12:44 +02:00
Daniel Agar
5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar
5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00
David Sidrane
626895eadc px4_fmu-v5x:Wrong Bit was being tested for mode. 
@TSC21  - this will fix you build
 2020-06-05 18:59:48 -04:00
Daniel Agar
31fe7af454 selectively increase optimization -Os -> -O2 
- targetted at modules/libraries that benefit without drastically
increasing flash usage
 - ignored on boards with CONSTRAINED_FLASH set
 2020-06-04 20:59:52 -04:00
Daniel Agar
6c96748e54 boards: pixhawk mini add unused MPU9250 CS & DRDY pins 2020-06-03 04:03:27 -07:00
David Sidrane
73bb18a053 px4_fmu-v6x: Limit Slew rate So IMU works with DMA 
The defualt in NuttX is OSPEED of 50Mhz. This is realy a slew
   rate control. At the default high slew rate the overshoot was
   .7 Volts. On a ICM20649 this was causing the device to output
   garbage. All 0s

   N.B. A passive scope or Logic analyser's probes load will mask
   the failure. Useed a FET probe to verify the issue.
 2020-06-02 13:02:51 -04:00
David Sidrane
5d90c31632 Added PX4 FmuV6X 2020-06-02 13:02:51 -04:00
Julian Kent
dd9c82eb20 systemcmds/gpio: Add nsh command to manipulate/read GPIO 
* Add basic GPIO test app for R/W on pins from nuttx shell
* Add gpio command to fmu-v3 and fmu-v4
* Sanitize gpio commands by pin configs, --force to override
 2020-05-23 11:47:40 -04:00
David Sidrane
04db5391fc px4_fmu-v5x:Fix PG11 assignment 2020-05-23 11:46:00 -04:00
David Sidrane
b2153c7f2f px4_fmu-v5x:PG6 is free GPIO 2020-05-23 11:46:00 -04:00
David Sidrane
7f84ed57dd px4_fmu-v5x:Using SE050 not A71CH 2020-05-23 11:46:00 -04:00
David Sidrane
637578b8be px4_fmu-v5x:Correct trace connector description 2020-05-23 11:46:00 -04:00
Beat Küng
9c6f42a867 v5x defconfig: increase TELEM2 UART TX buffer size to 3000 
Required for very high-rate log streaming @3MBit baudrate.
 2020-05-20 09:12:50 +02:00
Daniel Agar
678c3fe8e4 boards: px4_fmu-v5_optimized don't build all mags 2020-05-07 15:21:15 -04:00
Daniel Agar
746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar
28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar
8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar
3e5f85b47b uavcannode: add distance_sensor (all possible instances) 2020-04-30 14:52:06 -04:00
Jakub Kákona
dfa5ca1710 FlightGear simulator support (#14539) 
- Add flightgear_bridge submodule.
- Add traget px4_sitl_nolockstep with disabled  LOCKSTEP simulation.
- Add flightgear viewer targets and startup scripts
- Add a few possible vehicles plane (rascal), autogyro (tf-g1), and rover (tf-r1))

Co-authored-by: Vit Hanousek <vithanousek@seznam.cz>
 2020-04-29 08:46:59 +02:00
Beat Küng
34c75f2d36 boards: temporarily disable UART TX DMA 
work-around for https://github.com/PX4/Firmware/issues/14659.
This can be reverted when fixed properly.
 2020-04-27 08:47:46 -04:00
Daniel Agar
5739cf27e5 boards: delete obsolete commented config systemcmd 2020-04-26 22:34:34 -04:00
Roman Dvořák
75fe3bee8c drivers/rpm: add simple RPM message simulator (dummy publisher) 2020-04-25 09:10:11 -04:00
Daniel Agar
06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
Daniel Agar
7c7ee115e3 boards: px4_io-v2 defconfig optimizations to save memory 
* disable CONFIG_ARMV7M_MEMCPY to save flash
* disable CONFIG_LIB_BOARDCTL
* remove unnecessary pthread and task settings
* reduce preallocated watchdogs
* reduce console buffer size
* reduce IDLE thread stack
* reduce user main stack

Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
 2020-04-15 23:17:44 -04:00
mcsauder
6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar
1ac6230758 boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21 
- this can lower cpu usage considerably on older boards
 2020-04-15 21:52:02 -04:00
Daniel Agar
588195f46c boards: px4/fmu-v4pro cleanup rc.board_sensors 
- board has either an icm20602 or icm20608g, not both
 - probe all typical externally compasses
 2020-04-13 15:52:45 -04:00
Daniel Agar
66eacd24bc px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar
276b2cad5a boards: fmu was renamed pwm_out 2020-04-11 14:18:55 -04:00
Daniel Agar
55fc0cbdc7 boards/px4/fmu-v4: fix internal hmc5883 start 2020-04-09 15:54:10 -04:00
Beat Küng
31937c280d px4/v4: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Beat Küng
cbed023334 px4/v{2,3}: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Beat Küng
68e1172bb5 px4/v5x: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Daniel Agar
a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling 
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
 2020-04-08 13:20:54 -04:00
Daniel Agar
7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Julian Oes
b01cdafcf6 boards: add esc_battery to build 2020-04-06 15:56:54 +02:00
Julian Oes
509b8b6b4b First skeleton for esc_battery module 2020-04-06 15:56:54 +02:00
Daniel Agar
ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar
40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar
15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar
02f4ad61ec I2C/SPI require device type in constructor 2020-04-01 12:24:22 -04:00
Daniel Agar
ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
baumanta
2103b8f7de fmu-v5_optimized: disable esc_calib 2020-03-26 08:00:30 +01:00
Daniel Agar
44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Daniel Agar
f5fe50f839 invensense/icm20608g driver minor improvements 
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
 - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
 2020-03-25 01:05:38 -04:00
Daniel Agar
a13e8e573e boards: fmu-v2/v3 rc.board_sensors remove obsolete hmc5883 argument 
- try to keep fmu-v2/v3 mostly in sync
 2020-03-24 09:46:20 -04:00
Beat Küng
81dc73b752 fmu-v5_optimized: disable bl_update 
to reduce FLASH usage
 2020-03-24 09:46:20 -04:00
Beat Küng
b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00