yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-22 01:12:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
29,963 Commits 2 Branches 0 Tags
646519fa0d77f7a5e5bf27efd686011e2d9e830b
Commit Graph

235 Commits

Author SHA1 Message Date
Daniel Agar
7adc43b795 px4_fmu-v5: add critical section monitor build (#12724) 2019-08-16 21:48:09 -04:00
Daniel Agar
6e7e2b6e3b px4_fmu-v5: add irqmonitor build (#12723) 2019-08-16 19:01:16 -04:00
Daniel Agar
b7f0db62ba mRo Control Zero F7 initial board support 2019-08-14 13:13:27 -04:00
Silvan Fuhrer
d129fcccd5 Omnibus: take out local_position_estimator from build as was out of flash after ecl update for airspeed selection module 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-08-09 10:55:05 +02:00
Silvan Fuhrer
cedf14e2ba Airspeed Selector: repurpose wind estimator into an airspeed (selection, validation) module. 
This new airspeed module does:
  -runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
  -selects another airspeed sensor if for the current one a failure is detected
  -estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
  -outputs airspeed_validated topic

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-08-09 10:55:05 +02:00
David Sidrane
21782603b3 px4_fmu-v5x: add networking 
* fixed dropped CONFIG_LIBC_FLOATINGPOINT=y
* fix RMII TX pinning
* update platforms/nuttx/NuttX/nuttx w/ f7 eth
 2019-08-08 20:38:56 -04:00
Daniel Agar
0955fd2d58 NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20 2019-08-07 21:23:27 -04:00
Daniel Agar
5421ef5535 NuttX increase HPWORK and LPWORK stack by 256 bytes 2019-08-06 23:15:07 -04:00
Daniel Agar
9d701a077d NuttX reduce stack for interrupts, HPWORK, LPWORK 2019-08-06 11:00:55 -04:00
David Sidrane
5a1c46deeb fmuv5x:Use ADC3 for HW VER/REV detection 
fmu-v5x:hrt needs to be running for ADC time out

       Fixes bug introduced in 320d2e adding platform layer.
 2019-08-06 10:46:37 -04:00
David Sidrane
0ebb87357f fmu-v5:hrt needs to be running for ADC time out 
Fixes bug introduced in 320d2e adding platform layer.
 2019-08-06 10:46:37 -04:00
David Sidrane
f21dc82c24 Add i2cdetect to K66 2019-08-05 19:40:32 -04:00
Daniel Agar
a2288b1e16 AV-X board_config.h fix ADIS16497 chip select 2019-08-05 00:14:03 -04:00
Daniel Agar
77694183b2 delete position_estimator_inav 2019-08-02 17:38:28 -04:00
Karl Schwabe
d301c22665 Bosch BMI088 initial driver 2019-08-02 13:38:36 -04:00
David Sidrane
a90c87a791 px4fmu-v5x:BMI055->BMI088 (#12582) 2019-07-30 15:54:17 -07:00
David Sidrane
0300a380cf fmuv5x:Missing define PX4_SPI_BUS_SENSORS 2019-07-30 10:49:03 -04:00
David Sidrane
423dd23ff1 fmu-v5x:SPI fix Typo on SPI4 causing assertion 2019-07-30 10:49:03 -04:00
David Sidrane
25b95dcd0c px4fmu-v5x:Fix up start script 
Fix commandline for bmm150
    Add 2 internal bmp388 - needs works
    Add 2 ina2662
 2019-07-30 10:49:03 -04:00
David Sidrane
72c742f53d px4_fmuv5x:Update to master single wire 2019-07-30 10:49:03 -04:00
David Sidrane
7c1d616187 px4_fmuv5x:Fix GPS 2019-07-30 10:49:03 -04:00
David Sidrane
7eb7db476c px4_fmuv5x:Fixed SDMMC DMA 2019-07-30 10:49:03 -04:00
David Sidrane
13e777c2ce px4_fmuv5x:Use slot 0 with SDMMC2 2019-07-30 10:49:03 -04:00
Beat Küng
4f090980ab kakutef7 board_config: remove usb valid defines 
Otherwise 'system_power' gets published with voltage5v_v = 0, as there is
no 5V sensing pin, leading to Avionics Power Low preflight check failures.
 2019-07-25 10:38:57 -04:00
Beat Küng
6e833ed7a8 boards: add Holybro KakuteF7 2019-07-16 08:09:22 +02:00
Beat Küng
b7a0e1ef03 boards: simplify RC port configuration by using NuttX ioctl's 
A board only needs to define:
 #define RC_SERIAL_PORT                     "/dev/ttyS4"

Then it can optionally define one or more of the following:
 #define RC_SERIAL_SWAP_RXTX
 #define RC_SERIAL_SINGLEWIRE
 #define RC_INVERT_INPUT(_invert_true) px4_arch_gpiowrite(GPIO_SBUS_INV, _invert_true)
 2019-07-16 08:09:22 +02:00
Beat Küng
a3c920db7d board_defaults: remove unnecessary 'set MIXER_AUX none' 
On all of these boards '$USE_IO = no' will hold.
 2019-07-16 08:09:22 +02:00
Beat Küng
4b0afff33a fmu-v5 init.c: remove unused include 2019-07-16 08:09:22 +02:00
Daniel Agar
53c5b6d24f px4_fmu-v2_multicopter disable batt_smbus 
- saves a bit of flash
 2019-07-12 15:57:35 -04:00
Timothy Scott
2ed00c9cb6 Rover: Rewrote gnd_pos_control and removed gnd_att_control (#12239) 2019-07-11 09:39:13 -04:00
Daniel Agar
d4cd1d0d2e NuttX stm32f7 fully re-enable dcache with write back (#12435) 
- fixes https://github.com/PX4/Firmware/issues/12216
 - includes latest PX4/NuttX and apps update 7.29+
 2019-07-10 19:08:12 -04:00
Daniel Agar
dc10a68539 NuttX and apps update 7.29 2019-07-10 12:58:35 -04:00
Daniel Agar
321c2c0392 boards don't use px4_add_library for drivers_board 
- this prevents low level board support from using PX4 logging, uORB, etc
 2019-07-09 19:09:47 -04:00
Daniel Agar
6ea5853161 px4_fmu-v2_multicopter sync with px4_fmu-v2_default 2019-07-08 14:49:58 -04:00
Daniel Agar
58b74e241e px4_fmu-v2 disable mpu9250 2019-07-08 14:49:58 -04:00
Daniel Agar
26f6794aa9 px4_fmu-v2 re-enable CONSTRAINED_FLASH build 
- this limits console output at boot
 2019-07-08 14:49:58 -04:00
Daniel Agar
15d1543f95 create systemcmds/i2cdetect tool to scan i2c bus 2019-07-06 10:28:16 -04:00
David Sidrane
ea0da3a3b6 px4/fmu-v5x: GPIO ADC had bad definition 2019-07-05 12:23:06 -04:00
dlwalter
cbdfc0c587 px4_fmu-v5: rc.board_sensors start lis3mdl optional external magnetometer 2019-07-01 14:52:14 -04:00
David Sidrane
31dfaee76a fmuv5x board support 2019-06-26 14:34:02 -04:00
Daniel Agar
5f20d3cf3b Jenkins HIL increase boot timeout for stackcheck build 
- px4_fmu-v5_stackcheck remove extra drivers (to try and get the system
usuable)
 2019-06-15 16:59:04 -04:00
David Sidrane
6eb4cf0ceb Add CUAV 5+ and Nano to fmu-v5 manifest 
* rcS: Set SYS_USE_IO for Nano
 2019-06-14 13:19:41 -04:00
Daniel Agar
bef7a9ba8e NuttX boards increase task limit 32 -> 64 (#12230) 2019-06-10 09:42:36 -04:00
BazookaJoe1900
b0176dc88a Pr cleanup board files (#12218) 
Clear non exist functions definitions
Added RC Serial note before its relevant definitions
 2019-06-08 15:48:53 -07:00
Beat Küng
ab0466eddf omnibus: enable dmesg buffer (3kb) 
without LPE running, we have about 17.6 kb more free RAM.
 2019-06-06 11:11:44 -04:00
Beat Küng
223e3c6429 aerofc rc.board_defaults: remove wrong parameter settings 
This was a regression.
 2019-06-06 11:11:44 -04:00
Beat Küng
73102dc3c4 SYS_MC_EST_GROUP: add q estimator only option and activate on omnibus 2019-06-06 11:11:44 -04:00
Beat Küng
1321f96b59 omnibus rc.board_defaults: remove flash-based params transition logic 2019-06-06 11:11:44 -04:00
Tanja Baumann
fcec3b3efc px4_fmu-v4: increase uart buffer sizes for vision algorithms (#12199) 2019-06-06 09:01:42 -04:00
David Sidrane
79eb74be3f Fix bmp280 on FMUv4 2019-06-05 15:43:53 -04:00