yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-22 01:12:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
35,120 Commits 2 Branches 0 Tags
5e73fe588ed4c3b345373dcafce81ac2f376ef86
Commit Graph

35120 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
David Sidrane
5e73fe588e NuttX with SRAM4-heap-bp 2021-04-03 14:13:23 -04:00
Jaeyoung-Lim
01083cecfc Enable adis16448 with parameter 
This commit adds enabling adis16448 with a parameter
 2021-04-03 13:58:25 -04:00
Nidhish Raj
01d8c3da3d vtol_att_control: occasional tailsitter forward transition failure issue solved 
Tailsitter VTOLs very occasionally gets stuck with zero roll and pitch angle in multicopter mode after
a forward transition command is issued.
This very rare behavior is triggered by the following events:
1> a forward transition is triggered either in auto or manual mode.
2> in the vtol_att_control main loop, if multicopter and fixed wing attitude setpoints are not updated, transition state is not updated
3> the commander changes the vehicle status to transition mode.
4> multicopter pos controller initiated  Transition flight task. This results in zero roll and pitch setpoint due to zero acceleration setpoint
5> now vtol_att_control executes and updates the transition state. Specifically, _q_trans_start and _q_trans_sp are set with zero roll and pitch sp
6> tilt is evaluated to be NaN, despite _q_trans_sp being normalized. This happens for 25% of all yaw angles when using float datatype. This can be
   verified using the matrix library
7> once tilt is evaluated to be NaN, _q_trans_sp is never updated again and is stuck in this state for ever.

This has been fixed by constraining the cos(tilt) within +1 to -1 range
Further, _q_trans_start and _q_trans_sp are immedietly initialized after a transition event is triggered.
 2021-04-03 19:19:48 +02:00
Daniel Agar
b30f3917d3 sensors/vehicle_imu: periodically send mavlink critical message if clipping 2021-04-03 10:32:16 -04:00
Daniel Agar
588883f663 uavcan: quiet server output 
- remove verbose UAVCAN command bridge prefix
 - disable many normal PX4_INFO messages entirely (kept as PX4_DEBUG)
 - properly exit when arming (silently)
 2021-04-03 10:07:50 -04:00
David Sidrane
2fcdadfbd1 holybro_durandal-v1:Enable UAVCAN 2021-04-03 12:47:20 +02:00
David Sidrane
003ef59019 px4_fmu-v6x:Enable UAVCAN 2021-04-03 12:47:20 +02:00
Lorenz Meier
c96ca0434e Update README.md 
Sort autopilot generations according to relevance to potential users (latest first)
 2021-04-03 12:21:02 +02:00
PX4 BuildBot
9a02141d0d Update submodule ecl to latest Fri Apr 2 12:39:10 UTC 2021 
- ecl in PX4/Firmware (744cd1182e183b62a0ab4b2f3e4e3c4aa6f5c15f): 6f2dec726a
    - ecl current upstream: 5d34d7a24e
    - Changes: 6f2dec726a...5d34d7a24e

    5d34d7a 2021-03-31 Eike - Height source vision: Fallback to rangefinder if available (#994)
da06f25 2021-03-28 PX4BuildBot - [AUTO COMMIT] update change indication
85fcf93 2021-03-28 PX4 BuildBot - Update geo_lookup WMM  to latest Sun Mar 28 11:48:06 UTC 2021
 2021-04-02 11:46:19 -04:00
Lorenz Meier
1ec8ce58c7 Commander: Increase auto-disarm timeout to 25 seconds after arming 2021-04-02 09:37:40 +02:00
Daniel Agar
278633c980 boards: cuav x7pro include correct adis IMU 2021-04-01 17:13:54 -04:00
Daniel Agar
c017f76a36 github actions add all NuttX builds 2021-04-01 10:21:14 -04:00
Lorenz Meier
82f319a84a Commander: Add support for pairing via commandline 2021-04-01 09:56:09 -04:00
斯东Stone
e789124bd9 Remove duplicated line in 50003_aion_robotics_r1_rover 2021-04-01 09:36:20 -04:00
Beat Küng
369d375417 holybro_can-gps-v1_debug: disable ekf & listener due to flash overflow 2021-04-01 08:35:36 -04:00
Daniel Agar
9171a84324 IMU_DGYRO_CUTOFF increase default 10 -> 20 Hz 2021-04-01 08:30:09 -04:00
Jaeyoung-Lim
19c4fdd7c5 Add support for 3D body thrust setpoint for offboard attitude control 
This adds support for filling up the 3D thrust setpoint using SET_ATTITUDE_TARGET message
Update mavlink submodule
 2021-04-01 13:58:04 +02:00
Nico van Duijn
8d3335906a v5x: use low bandwidth mavlink mode 
This changes the default mavlink message set from onboard to
onboard_low_bandwidth, which drastically reduces the bandwidth required to get a
usable connection.
 2021-04-01 07:28:43 +02:00
Daniel Agar
846695f986 ekf2: replace vehicle_imu lost error message with perf count 2021-03-31 22:07:32 -04:00
Daniel Agar
00f86eb895 drivers/uavcan: silence redundant exit message 2021-03-31 22:01:35 -04:00
Chris Lovett
292a66ce41 Add support for simulators running on a different host than the PX4 instance 2021-03-31 20:56:38 -04:00
RomanBapst
b66ae5f2d4 tecs: use raw inertial acceleration for true airspeed complementary filter 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-03-31 20:12:40 -04:00
Beat Küng
9dd6bef7f9 autostart scripts: remove SYS_PARAM_VER 
With the airframe defaults there's no use for that anymore
 2021-03-31 20:12:05 -04:00
Beat Küng
aec63eacbe mavlink_receiver: avoid spamming 'unsupported component id' 2021-03-31 20:10:15 -04:00
Matthias Grob
5f4802a239 SlewRate: add back dummy file for mac build 2021-03-31 15:50:16 +02:00
Matthias Grob
8fec39ad39 MulticopterPositionControl: readd takeoff ramp fix 
added in #14821 and accidentally removed in #14665
 2021-03-31 15:21:42 +02:00
Bastian Jäger
752bc9ebce startup scripts: fix rc.mavlink_override 2021-03-31 14:05:24 +02:00
Julian Kent
5c5ec1a0ea Receive telemetry_status, send vehicle_trajectory_waypoint_desired 2021-03-31 13:26:00 +02:00
Julian Kent
b5a64f957e Update RTPS messages to match what is needed for PX4/Avoidance 2021-03-31 13:26:00 +02:00
Julian Kent
c1cb964c2a RTPS timesync don't use MONOTONIC_RAW 2021-03-31 13:25:27 +02:00
Julian Kent
1011382098 Clamp RTPS -> uorb timestamps to system time 2021-03-31 13:25:27 +02:00
TSC21
eca4d90a91 init.d-posix: adjust COM_OBC_LOSS_T when using PX4_SIM_SPEED_FACTOR 2021-03-31 13:25:01 +02:00
TSC21
7abce87ae4 commander: add COM_OBC_LOSS_T for setting onboard computer loss time-out 2021-03-31 13:25:01 +02:00
Beat Küng
e9370c658a nuttx cmake: include upload.cmake if it exists (same as on posix) 2021-03-31 11:25:11 +02:00
RomanBapst
5b08362ba3 position_controller_status message: added comments regarding NAN 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-03-31 11:23:33 +02:00
Matthias Grob
c06b5a1de9 MulticopterPositionControl: improve tilt limit readability and scope 
according to @bresch's review comment.
 2021-03-31 10:03:08 +02:00
Matthias Grob
94469d84ae MulticopterPositionControl: fix twitch on tilt limit relaxation 2021-03-31 10:03:08 +02:00
Matthias Grob
34a5948692 Adapt SlewRate includes to convention 2021-03-31 10:03:08 +02:00
Matthias Grob
c16b937221 Takeoff: switch internally to use a ramp progress 2021-03-31 10:03:08 +02:00
Matthias Grob
8ca76feaba Takeoff: remove updateRamp() early return 2021-03-31 10:03:08 +02:00
Matthias Grob
b7600f4e4d Commander: check_posvel_validity use return value 2021-03-30 22:33:01 -04:00
Matthias Grob
29e1e0905c Commander: switch main_state functions to pass by reference 2021-03-30 22:33:01 -04:00
Matthias Grob
531de5c588 Commander: switch all state_machine_helper functions to pass by reference 2021-03-30 22:33:01 -04:00
Matthias Grob
d97fba67e5 Commander: switch helper functions to pass by reference 2021-03-30 22:33:01 -04:00
Daniel Agar
0fa91f7cb0 commander: centralize main_state strings and simplify main state change attempts 
* commander: centralize main_state strings and simplify main state change attempts
 2021-03-30 17:56:28 +02:00
Daniel Agar
18be1bacdc state_machine_helper: automatically initialize to assist mode if using mavlink manual control 2021-03-30 17:56:28 +02:00
Claudio Micheli
b001865e5c Commander: clean up logic for flight mode transitions and add joystick mode initialization 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2021-03-30 17:56:28 +02:00
Daniel Agar
9a35756cd1 ekf2: enable range aid by default 
- this is to help more users get the benefit (by default) and perhaps circumvent the common mistake of setting EKF2_HGT_MODE to range sensor
 - this should be safe to enable as the range aid defaults are fairly conservative (max horizontal velocity 1 m/s, and range aid gate 1 SD)
 2021-03-30 10:23:18 -04:00
Daniel Agar
6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Michael Schaeuble
f9af1bbe2d PreFlightCheck: Check if SD card is present only once and store the result 
statfs accesses the file-system and can be blocking for an extended period. Since the SD card check is part of the preflight checks in the main thread of commander, it could block its execution and cause various issues. The SD card is only mounted in rcS during boot so the state will not change after the first check.
 2021-03-30 08:20:49 +02:00