honglang
5672af4299
CUAV X7pro and Nora: use icm42688p instead of bmi088
2021-06-02 09:11:37 -04:00
CUAVcaijie
ffe9f8a942
boards: CUAV Nora/X7Pro ICM20649 on SPI6 bus will be replaced by ICM20689
2021-05-18 18:49:25 -04:00
David Sidrane
644794d134
Revert "boards: CUAV x7pro disable SPI6 IMU until NuttX BDMA is fixed"
...
This reverts commit 0b4006ae86
2021-03-23 05:52:27 -07:00
Daniel Agar
dd479f9cca
drivers/imu/analog_devices/adis16470: Analog Devices ADIS16470 IMU driver for CUAV x7pro
2021-03-16 18:00:06 -04:00
Daniel Agar
0b4006ae86
boards: CUAV x7pro disable SPI6 IMU until NuttX BDMA is fixed
2021-03-15 10:54:43 -04:00
Daniel Agar
8a0bf15b9e
boards: CUAV X7Pro fix BMI088 orientation
2021-02-11 23:05:48 -05:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
Daniel Agar
7569722821
iSentek IST8310 magnetometer rewrite
...
- simple state machine to reset, configure, etc
- checked register mechanism (sensor will reset itself on configuration error)
- configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
- adjusted orientation handling in driver to match datasheet as closely as possible
- in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
2020-09-02 13:14:45 -04:00
Daniel Agar
6f6efd60b7
boards: centralize optional external I2C sensor start
...
- configured with new parameter SENS_EXT_I2C_PRB
2020-06-10 09:04:13 -04:00
Daniel Agar
d89b7804f7
boards: initial CUAV X7Pro support (not complete)
...
- this is booting and functional, but still missing a few things
- still needs full PWM output, verification of all sensor rotations and IO, etc
2020-05-01 20:59:28 -04:00
