Commit Graph

32799 Commits

Author SHA1 Message Date
Daniel Agar
3dd7d0c292 boards: fmu-v5 debug variant disable unnecessary modules to save flash
- partially sync with fmu-v5 stackcheck build
2020-07-18 13:41:26 -04:00
Daniel Agar
b54dea0ccd wq:attitude_ctrl: small stack increase to silence warning 2020-07-17 19:51:48 -04:00
Daniel Agar
42493b3d59 logger: add full commander and safety logging by default
- increase battery_status rate to be useful
2020-07-17 17:27:15 -04:00
Daniel Agar
94a5a97dcc drivers/safety_button: only publish safety at 1 Hz or immeidately on change 2020-07-17 17:27:15 -04:00
Daniel Agar
c6aafed9d0 px4io: only publish safety at 1 Hz or immeidately on change 2020-07-17 17:27:15 -04:00
Daniel Agar
bdb4251fa4 fw_pos_control_l1: if using air data (baro) copy every cycle
- vehicle_air_data won't necessary have an update every iteration and these adjusted throttle values aren't stored
 - this only would have worked in the past because the vast majority of systems were using the ms5611 barometer with a publication rate that's faster than the controller
2020-07-17 17:14:45 -04:00
Daniel Agar
e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Julian Oes
9723b26d72 workflows: OSX.sh is now called macos.sh 2020-07-17 14:58:31 -04:00
Julian Oes
7c49afa716 setup: only install homebrew if not already there 2020-07-17 14:58:31 -04:00
Julian Oes
7667298c86 setup: move the OSX.sh script to macos.sh
It's called macOS for a while now, and no longer OSX.
2020-07-17 14:58:31 -04:00
Julian Oes
6acf279085 setup: we no longer need Java 8
However, Java 11 or 14 depending on the Ubuntu version are just fine.
2020-07-17 14:58:31 -04:00
Julian Oes
000c0c5905 setup: mark Ubuntu 16.04 as unsupported
Ubuntu was already unsupported, now that 20.04 is out, however, the
change was not reflected yet in this script.
2020-07-17 14:58:31 -04:00
Julian Oes
cece343cf7 setup: Java 14 is fine now 2020-07-17 14:58:31 -04:00
Julian Oes
aed114465e setup: clean up macOS setup script
- Spaces -> tabs.
- Remove "brew install python" because it's already a dependency of the
  px4-dev tap.
- Remove "brew install ccache" as we can also add it to the px4-dev tap.
- Don't try to update pip installation, it works fine as is.
- Install pip dependencies as user, no need for system-wide install.
2020-07-17 14:58:31 -04:00
Daniel Agar
ad14796b5f mavlink: GLOBAL_POSITION_INT send without lat/lon availability
- the altitude and velocity portions of this message are still relevant
without GPS lat/lon
2020-07-17 10:46:06 -04:00
Julian Oes
9d97148ce8 commander: fix takeoff and land CI test
This fixes the takeoff and land CI test where we do a takeoff and land
without RC connected.

In my opinion it does not make sense to go into RC lost failsafe if
a datalink is still available.
Of course, this can be dangerous if someone has a companion computer
connected which gets detected as "data link" but actually has no
connection to the ground station.
2020-07-17 10:30:13 -04:00
Daniel Agar
e79ccd1333 Jenkins: hardware print vehicle_air_data 2020-07-17 09:42:19 -04:00
Daniel Agar
9a1ca00285 fw_pos_control_l1: replace sensor_baro with vehicle_air_data
- controllers shouldn't be accessing raw sensor data directly
2020-07-17 09:42:19 -04:00
Daniel Agar
1394b5d7bc sensor_baro add separate timestamp_sample field
- the timestamp is uORB message publication metadata
2020-07-17 09:42:19 -04:00
Daniel Agar
19059a80bd sensors: throttle vehicle_air_data publication (SENS_BARO_RATE)
- don't bother running baro aggregator if SYS_HAS_BARO disabled
2020-07-17 09:42:19 -04:00
bresch
67ae40e922 FlightTaskAuto: fix yaw reset issue during takeoff
During takeoff, Navigator is sending a constant yaw value.
However, there is always a reset at 1.5m of the yaw estimate in EKF2
that is not handled by Navigator that produces a glitch in the rate
controller. Given that in FlightTask, the yaw
is already computed and properly corrected in case of an estimator reset
event, we just ignore the yaw value sent by navigator during takeoff.
2020-07-17 10:51:01 +02:00
Daniel Agar
8020d6407f load_mon: remove obsolete rate comment in description 2020-07-16 15:11:53 -04:00
Daniel Agar
f0ceb44f6c Jenkins: hardware print cpuload 2020-07-16 15:11:53 -04:00
Daniel Agar
392eb123fc load_mon: split out header 2020-07-16 15:11:53 -04:00
Daniel Agar
fd66d42906 load_mon updates
- increase rate
 - cpu load calculation grab timestamp atomically
 - only check one task per cycle (but cycle at a higher rate)
 - decrease available FD threshold
 - minor cleanup
2020-07-16 15:11:53 -04:00
Matthias Grob
413cf8b7c4 FlightTasks: Sticks methods naming refactor according to comments 2020-07-16 19:01:22 +02:00
Matthias Grob
0d56035a46 FlightTaskAutoMapper: clarify influence of sticks 2020-07-16 19:01:22 +02:00
Matthias Grob
079c5a11c2 FlightTaskAuto: allow rc assist to stop descend
Before the autohority was only enough to slow down the descend but not
stop to zero vertical velocity.
2020-07-16 19:01:22 +02:00
Matthias Grob
91c0f19121 FlightTaskAuto: use new Sticks class for assisted land speed 2020-07-16 19:01:22 +02:00
Matthias Grob
4366898f11 FlightTasks: make gear switch independent of sticks 2020-07-16 19:01:22 +02:00
Matthias Grob
4667693f37 mixer_module: use math:constrain 2020-07-16 16:55:33 +02:00
Oleg
b2af2f32d4 mavlink_ftp: close session without activity
10s inactivity timeout to close session
2020-07-16 14:49:44 +02:00
Daniel Agar
1bf0c58537 Update submodule mavlink v2.0 to latest Thu Jul 16 00:39:38 UTC 2020
- mavlink v2.0 in PX4/Firmware (b5ffdc6d35): d87878bce4
    - mavlink v2.0 current upstream: f608801c1b
    - Changes: d87878bce4...f608801c1b

    f608801c 2020-07-15 PX4BuildBot - autogenerated headers for rev 4eee4b83c2

Co-authored-by: PX4 BuildBot <bot@px4.io>
2020-07-16 00:07:17 -04:00
PX4 BuildBot
b5ffdc6d35 Update submodule sitl_gazebo to latest Wed Jul 15 12:39:34 UTC 2020
- sitl_gazebo in PX4/Firmware (d791c8baad): 1af7e29dbb
    - sitl_gazebo current upstream: 629e5f5c23
    - Changes: 1af7e29dbb...629e5f5c23

    629e5f5 2020-07-15 Morten Fyhn Amundsen - Barometer drift (#544)
4ec5caa 2020-04-26 JaeyoungLim - Make wind plugin a world plugin
2020-07-15 12:42:11 -04:00
Daniel Agar
e74c0b0ef6 Update submodule mavlink v2.0 to latest Wed Jul 15 12:39:39 UTC 2020
- mavlink v2.0 in PX4/Firmware (a06326f99a6964295550176855bd7b93b55ebc9e): d5538ea0da
    - mavlink v2.0 current upstream: d87878bce4
    - Changes: d5538ea0da...d87878bce4
2020-07-15 12:41:13 -04:00
stmoon
4418179a92 fix the fastrtps version problem in case of v1.10.0 2020-07-15 16:30:58 +01:00
Ricardo Marques
d0c74712b5 Fix comment typo in mavlink_receiver.cpp 2020-07-15 10:47:52 -04:00
PX4 BuildBot
cfcdab3992 Update submodule nuttx to latest Wed Jul 15 12:39:46 UTC 2020
- nuttx in PX4/Firmware (fbc4fa04c372960894766a69c8ea35dfafcb0c4d): f5925e194e
    - nuttx current upstream: 61742342ec
    - Changes: f5925e194e...61742342ec

    61742342ec 2020-07-09 Beat Küng - [BACKPORT] gpio: extend gpio_pintype_e for pulldown/up and opendrain
2020-07-15 09:59:37 -04:00
Daniel Agar
fe84bdac6e README: remove broken jenkins build status badge 2020-07-15 09:54:30 -04:00
Julian Kent
435c2fe438 Fix rarely flakey test on Github Actions 2020-07-15 09:50:58 -04:00
Julian Oes
5f2abb66a4 mavsdk_tests: add workaround to prevent failsafe
This workaround should fix the test failure where we disarm before
taking off because we accidentally switched to failsafe mode right
before taking off because we were still in Manual mode and not Hold yet.
2020-07-15 09:38:06 -04:00
Julian Oes
4ad7ea6c1a mavsdk_tests: increase the poll time resolution
With only 10 steps for e.g. 60 seconds we are likely to miss updates.
2020-07-15 09:38:06 -04:00
Daniel Agar
d791c8baad mavlink: mission manager fix signed sequence debug print type 2020-07-14 12:47:57 -04:00
Matthias Grob
1e56eed2aa Remove FlightTaskManual from the inheritance structure 2020-07-14 18:07:09 +02:00
Matthias Grob
9daff24e79 FlightTasks: move stick handling into library 2020-07-14 18:07:09 +02:00
Pandacoolcool
49a543e1b2 systemcmds/tests: Ignore unused but set parameter warnings 2020-07-14 10:05:55 -04:00
Matthias Grob
ced91f135b posix rcS: remove various SITL custom settings
because we need to have SITL simulation as realistic as possible
compared to a real flight with default settings such that we
either fix the problems or adjust the defaults already in SITL testing.
2020-07-14 09:58:46 -04:00
Daniel Agar
fa44cd5cd5 px4_work_queue: rename navigation_and_controllers -> nav_and_controllers
- keep the thread within the current NuttX max length
2020-07-14 09:48:47 -04:00
Julian Kent
78ff7c608f Expand tracking error for straight line test 2020-07-14 11:34:14 +02:00
Julian Kent
14e2603bc4 Pull out matrix math primitives into anon functions 2020-07-14 11:34:14 +02:00