Lorenz Meier
3387aa64d4
Enabled MTD partitions, successfully tested params
2014-01-12 16:33:23 +01:00
Lorenz Meier
90e86bd4db
Added support for byte MTD
2014-01-11 20:52:44 +01:00
Lorenz Meier
902fcf44c9
Merge branch 'master' of github.com:PX4/Firmware
2014-01-09 08:11:41 +01:00
Lorenz Meier
2d8d43c4a8
Added UART5 DMA config for reliable IO updates
2014-01-09 08:11:35 +01:00
Andrew Tridgell
d4d2571161
FMUv2: enable RXDMA on 2nd GPS port and debug console
...
This should reduce the chance of lost data on these ports due to high
interrupt latency
2014-01-07 09:32:49 +01:00
Andrew Tridgell
c4fc730aca
FMUv2: make all UARTs use 512 byte buffer, 2048 for CDCACM output
...
this is important when using UARTs for things like secondary GPS
modules, which may produce large enough transfers that 128 bytes is
not enough.
The 2048 buffer for CDCACM transmit makes mavlink log and parameter
transfer faster
2014-01-07 09:32:23 +01:00
Lorenz Meier
ea107f4151
Enable DMA on UART8
2013-12-16 16:47:28 +01:00
Andrew Tridgell
c46bd8b041
Enabled DMA on both telemetry ports and GPS
2013-12-13 11:26:16 +01:00
Lorenz Meier
8483670fed
Hot hotfix: Change the number of preallocated smeaphores on both boards to the same value.
2013-09-22 12:17:07 +02:00
Lorenz Meier
0810b264e5
Hotfix: Increase work stack sizes
2013-09-16 22:34:37 +02:00
Lorenz Meier
cb1621005c
Hotfix: Bumping up interrupt stack size, which fixes a number of evil symptoms seen in some test cases. Needs more inspection, but this fix holds for the test cases
2013-09-16 14:36:43 +02:00
Lorenz Meier
5d09f48110
Disabling debug output for further testing
2013-09-12 10:03:54 +02:00
px4dev
f49e444ce3
Defconfig hacks to get me a console.
2013-09-11 13:42:29 -07:00
Lorenz Meier
811e1151fa
Fix UART buf sizes so that MAVLink transfers are not corrupted for all serial ports intended for MAVLink
2013-09-03 16:41:29 +02:00
Anton Babushkin
864c1d048c
Revert "Tighter configs to save RAM"
...
This reverts commit 3380d40a7d
2013-08-27 20:16:51 +02:00
Lorenz Meier
3380d40a7d
Tighter configs to save RAM
2013-08-27 15:37:04 +02:00
Lorenz Meier
7b42d7a047
Made number of streams more reasonable
2013-08-27 07:50:15 +02:00
Lorenz Meier
bfd0444cb3
Revert "Increased the number of max files descriptors considerably"
...
This reverts commit 3157285254
2013-08-27 07:49:36 +02:00
Lorenz Meier
3157285254
Increased the number of max files descriptors considerably
2013-08-26 13:26:01 +02:00
Lorenz Meier
80f38e3dea
Put console and syslog on UART8, added support to nshterm for proper serial port config
2013-08-18 21:00:47 +02:00
Lorenz Meier
d0a9d250f7
Enforced consistency between configs
2013-08-14 14:57:30 +02:00
Lorenz Meier
92fc6a05c3
Putting SDIO back to DMA and disabling CCM again
2013-08-12 14:07:42 +02:00
Lorenz Meier
e1037e20be
Fixed inconsistend defconfig - switching to menuconfig ASAP
2013-08-12 13:57:33 +02:00
Lorenz Meier
70f272bd22
Disabled SDIO DMA, enabled CCM memory
2013-08-12 13:44:11 +02:00
Lorenz Meier
a0235bd507
Increased buffer sizes for telemetry, set USB PID correctly according to new scheme
2013-08-09 08:36:18 +02:00
Andrew Tridgell
687273ae6f
Enable the dedicated interrupt stack for both v1 and v2 boards. This will help save us from threads that are under-provisioned stack-wise.
2013-08-07 19:41:32 -07:00
px4dev
fbd5aae8c6
Revert "Merged USB ID changes to match bootloader"
...
This reverts commit 8e599e4a3c
2013-08-03 19:41:37 -07:00
Andrew Tridgell
8e599e4a3c
Merged USB ID changes to match bootloader
2013-08-04 00:16:01 +02:00
Lorenz Meier
87cb066bed
Disabled serial port renumbering
2013-07-28 14:50:45 +02:00
Lorenz Meier
349c962469
Compiling / executing WIP on leds, leds not operational yet
2013-07-18 10:01:43 +02:00
Lorenz Meier
72f58829c3
Fixed microSD, operational fine, will need more work with CCM SRAM.
2013-07-17 08:49:15 +02:00
Lorenz Meier
e266f6d425
WIP on microSD support
2013-07-17 08:37:02 +02:00
px4dev
b4029dd824
Pull v2 pieces up to build with the merge
2013-07-07 17:53:55 -07:00
