yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-22 01:12:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
29,164 Commits 2 Branches 0 Tags
226f3c0999c2977b9f8b5ed0d0de8a74c3e98b0c
Commit Graph

50 Commits

Author SHA1 Message Date
Beat Küng
226f3c0999 rc.board_sensors: probe for external qmc5883 2019-04-15 10:37:06 +02:00
Beat Küng
914a9b78b6 new airframe for sih, HIL_STATE_QUATERION sent through MAVLink 2019-04-12 09:25:07 +02:00
Daniel Agar
5a50f96bcf move icm20948 (Here GPS compass) to Cube sensors start (#11838) 2019-04-11 11:15:53 -04:00
David Sidrane
46c4a68b62 fmu-v5: Move stage 0 dcache disable to later in boot (#11791) 2019-04-04 11:07:28 -04:00
David Sidrane
1c212e3f84 M7 dcache ctrl via a parameter (#11769) 
* Support for armv7-m_dcache control via parameter

  The FORCE_F7_DCACHE parameter can be set to
   0 - (default) if Eratta exits turn dcache off else leave it on
   1 -  Force it off
   2 -  Force it on

   At boot the system will disable the d-cache if the silicon
   has the 1259864 Data corruption in a sequence of Write-Through
   stores and loads eratta.

   Post nsh script execution the FORCE_F7_DCACHE paramater
   will be used to set the d-cache to the state indicated
   above.
 2019-04-03 16:14:19 -04:00
Daniel Agar
5e6bfe1ad8 vscode updates 
* working debugging (one click build and debug)
   * SITL jmavsim
   * SITL gazebo
   * jlink px4_fmu-v{2-5}
 * improved syntax highlighting
   * GNU linker files
   * ROS message files msg/*.msg
   * jinja2 template files
 * fixed intellisense support
 2019-03-22 20:55:39 -04:00
Daniel Agar
3f890b6ab1 px4_fmu-v5 stackcheck compress defconfig 2019-03-21 08:41:01 -04:00
Daniel Agar
f6cd70bcc5 px4_fmu-v5 nsh compress defconfig 2019-03-21 08:41:01 -04:00
David Sidrane
3938574a4a px4_fmuv5:Extend probes to CAP pins 
This also fixes a typo in the GPIO defines
 2019-03-18 16:16:23 -04:00
Hamish Willee
257b90958f Correct links to example docs 2019-03-15 08:05:54 +01:00
mcsauder
d60d802194 Correct board-config PIN1/PIN0 typo in fmu-v5/src/board_config.h. 2019-03-02 14:31:02 -08:00
David Sidrane
edd9f91a19 board:Set larger stack margin 2019-03-01 23:45:48 -05:00
David Sidrane
12d442e8dd px4_fmuv5:Stack Check build Increase to 2624 
The cause of the stack detection fault is because of the
   level of nesting in the start up script. We need to
   determine the worst case configuration and set the
   bar there.

   This fault occurred some 42 calls deep due to script
   calling script (repeat).

   The HW stack check requires as a margin of 204 bytes. That is
   ISR HW stacking of CPU(8) FPU(18) registers and SW stacking of
   CPU(11) and FPU(16) registers. Total CPU(19) registers is
   68 bytes and the total FPU(34) registers is 136 bytes.  On
   a system with a separate ISR stack This only needs to be 104
   so there is 100 bytes of headroom. But as coded the detection
   will give a false positive detection and fault. This does not
   mean that the stack will be corrupted.

   Adjustments to that stack can have no effect due to rounding.
   A stack size of 2608 and 2616 can yield the exact same size stack.
   So even when the failure is due to a 4 byte overflow, it can take
   greater than a 16 bytes increase to fix it. Because the final
   stack size is calculated with an 8 byte alignment after a 4 byte
   decrease. So 2624 becomes 2620 at runtime and will boot
   with SYS_AUTOSTART=4001.
 2019-03-01 23:45:48 -05:00
David Sidrane
0846059646 fmuv5:Repurpose TIM5_SPARE_4 as nARMED 
nARMED is a Digital OUTPUT. GPIO will be set as input while not
   armed HW will have Pull UP. While armed it will be configured
   as a GPIO OUT set LOW.
 2019-02-26 15:34:10 -05:00
Mohammed Kabir
20e44aa320 Analog Device ADIS16497 IMU initial support 2019-02-25 09:34:58 -05:00
Daniel Agar
f1d17c9003 camera_capture add to all boards 2019-02-11 14:15:28 -05:00
David Sidrane
b40f8d52a8 STM32F7 disable d-cache as a precaution (#11374) 
- see 1259864 Data corruption in a sequence of Write-Through stores and loads
 - if we can be certain this sequence won't occur in PX4 then the d-cache will be re-enabled
 2019-02-10 18:25:16 -05:00
DanielePettenuzzo
b12b4e1222 fixes after rebase 2019-02-10 18:07:44 -05:00
Daniel Agar
adad624572 px4_fmu-v5 remove PX4_FMUV5_RC00 2019-02-08 20:52:15 -05:00
Daniel Agar
06f5a782f4 px4_fmu-v5 board spi cleanup 2019-02-08 20:52:15 -05:00
Daniel Agar
1a4d31140e create example vehicle type build configs for fmu-v2 and fmu-v5 (#10963) 
- update navigator precision landing to build without multicopter
 2019-02-05 19:53:54 -05:00
Daniel Agar
8dc0509989 mpu9250: split icm20948 support out into new separate driver 2019-01-30 09:29:08 +01:00
mcsauder
dc5f18bdcd ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class. 2019-01-28 18:58:04 -08:00
Daniel Agar
739a02022b position_estimator_inav: move to examples (start deprecation) 2019-01-27 22:15:39 +01:00
David Sidrane
0f5f4814bb px4_fmu-v5: Inital commit NuttX 7.27+ 2019-01-25 06:32:37 -08:00
David Sidrane
8f308efa88 upstram NuttX CONFIG_EXAMPLES_NSH_CXXINITIALIZE->CONFIG_SYSTEM_NSH_CXXINITIALIZE 2019-01-25 06:32:37 -08:00
David Sidrane
f2208171d5 Add callout for CONFIG_BOARDCTL_FINALINIT 2019-01-25 06:32:37 -08:00
Daniel Agar
2ffb49b734 delete px4_includes.h header and update boards/ to use syslog 2019-01-23 18:25:18 -05:00
Daniel Agar
67e5986c9b delete obsolete examples/subscriber 2019-01-23 18:25:18 -05:00
Daniel Agar
693ee4808a delete obsolete examples/publisher 2019-01-23 18:25:18 -05:00
Daniel Agar
320d2e9383 create PX4 platform layer initialization helper (#11269) 
- starts requirements for PX4 modules (hrt, param, etc)
 2019-01-22 14:13:20 -05:00
Daniel Agar
fef65bf5c8 ROMFS split rc.board into defaults, sensors, and extras 2019-01-15 23:52:46 -08:00
David Sidrane
5e53f73ad8 fmu-v5:Add Alias CUAV V5 REV:5, VER:1 2019-01-08 07:34:22 -08:00
Daniel Agar
1b8c2c82d5 px4flow start in rc.sensors instead of per board (#11123) 
- fixes #11009
 2019-01-01 11:39:40 -05:00
Daniel Agar
5ba56c8c2c fmu-v5 timer_config.c fix code style 2018-12-04 01:06:54 -05:00
Daniel Agar
8622fa4aac move pca8574 driver to lights 2018-12-04 01:06:54 -05:00
Daniel Agar
75b2053243 move uavcan from modules to drivers 2018-12-04 01:06:54 -05:00
Daniel Agar
bbab66d974 move vmount to modules (it's not a driver) 2018-12-04 01:06:54 -05:00
Daniel Agar
9d42480f4e drivers create lights category (directory) 2018-12-04 01:06:54 -05:00
Daniel Agar
744bacd424 boards/ enforce astyle 2018-12-04 01:06:54 -05:00
Daniel Agar
d4e06e517a delete drv_gpio.h, modules/gpio_led, and fmu GPIO ioctls 2018-12-03 16:30:39 +01:00
David Sidrane
3e57067b35 fmu-v5:timer_config Move UI LED to 0 and condition status LEDS 
If the BOARD_HAS_CONTROL_STATUS_LEDS is set the status LED will
   not be PWM controlled.

   UI LED will always be PWM controlled.
 2018-12-02 10:34:04 +01:00
David Sidrane
f3e312e70e fmu-v5:Default the Power LED on 2018-12-02 10:34:04 +01:00
Daniel Agar
25799c6e75 create board specific init script and use with fmu-v5 2018-12-01 10:03:19 -05:00
Daniel Agar
e45e7aa8a6 move posix/tests/hello to examples/hello and include everywhere 2018-11-26 14:40:14 -08:00
Daniel Agar
3e0a3559a9 cmake use standard mechanisms for settings flags 2018-11-26 14:40:14 -08:00
Daniel Agar
c258534aa5 cmake px4_add_board document and cleanup 2018-11-26 14:40:14 -08:00
Daniel Agar
ec4c9da253 remove BOARD_NAME from board_config.h and set automatically 2018-11-26 14:40:14 -08:00
Daniel Agar
abb3817d31 boards new split VENDOR_MODEL naming convention 2018-11-26 14:40:14 -08:00
Daniel Agar
f692ad04d0 boards organization 2018-11-26 14:40:14 -08:00