Beat Küng
1cb6c36a00
adc: refactor into arch-specific directories
2019-08-30 07:59:44 +02:00
Beat Küng
ab43a83bed
platform: restructure (NuttX) architecture-specific code
...
updated: tone_alarm, px4io_serial, px4_micro_hal
2019-08-30 07:59:44 +02:00
Silvan Fuhrer
d129fcccd5
Omnibus: take out local_position_estimator from build as was out of flash after ecl update for airspeed selection module
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2019-08-09 10:55:05 +02:00
Silvan Fuhrer
cedf14e2ba
Airspeed Selector: repurpose wind estimator into an airspeed (selection, validation) module.
...
This new airspeed module does:
-runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
-selects another airspeed sensor if for the current one a failure is detected
-estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
-outputs airspeed_validated topic
Signed-off-by: Silvan Fuhrer <silvan@auterion.com >
2019-08-09 10:55:05 +02:00
Daniel Agar
0955fd2d58
NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20
2019-08-07 21:23:27 -04:00
Daniel Agar
5421ef5535
NuttX increase HPWORK and LPWORK stack by 256 bytes
2019-08-06 23:15:07 -04:00
Daniel Agar
9d701a077d
NuttX reduce stack for interrupts, HPWORK, LPWORK
2019-08-06 11:00:55 -04:00
Beat Küng
a3c920db7d
board_defaults: remove unnecessary 'set MIXER_AUX none'
...
On all of these boards '$USE_IO = no' will hold.
2019-07-16 08:09:22 +02:00
Timothy Scott
2ed00c9cb6
Rover: Rewrote gnd_pos_control and removed gnd_att_control ( #12239 )
2019-07-11 09:39:13 -04:00
Daniel Agar
dc10a68539
NuttX and apps update 7.29
2019-07-10 12:58:35 -04:00
Daniel Agar
321c2c0392
boards don't use px4_add_library for drivers_board
...
- this prevents low level board support from using PX4 logging, uORB, etc
2019-07-09 19:09:47 -04:00
Daniel Agar
15d1543f95
create systemcmds/i2cdetect tool to scan i2c bus
2019-07-06 10:28:16 -04:00
Beat Küng
ab0466eddf
omnibus: enable dmesg buffer (3kb)
...
without LPE running, we have about 17.6 kb more free RAM.
2019-06-06 11:11:44 -04:00
Beat Küng
73102dc3c4
SYS_MC_EST_GROUP: add q estimator only option and activate on omnibus
2019-06-06 11:11:44 -04:00
Beat Küng
1321f96b59
omnibus rc.board_defaults: remove flash-based params transition logic
2019-06-06 11:11:44 -04:00
Daniel Agar
f85c15e247
board common create generic dma allocator (from fat_dma_alloc)
2019-05-30 19:31:40 -04:00
Mohammed Kabir
b334b75886
Move optical flow drivers to own subdirectory
2019-05-28 23:23:38 -04:00
Beat Küng
914a9b78b6
new airframe for sih, HIL_STATE_QUATERION sent through MAVLink
2019-04-12 09:25:07 +02:00
Beat Küng
d9f8e37288
omnibus: use default clock rate of 20 MHz for SD card (CONFIG_MMCSD_SPICLOCK)
...
With 24 MHz accesses to the SD card were unreliable. And the chance of
failure recently got worse, so that logging became impossible.
2019-04-08 10:44:30 +02:00
Daniel Agar
5e6bfe1ad8
vscode updates
...
* working debugging (one click build and debug)
* SITL jmavsim
* SITL gazebo
* jlink px4_fmu-v{2-5}
* improved syntax highlighting
* GNU linker files
* ROS message files msg/*.msg
* jinja2 template files
* fixed intellisense support
2019-03-22 20:55:39 -04:00
Daniel Agar
be93dd1c5d
omnibus_f4sd nsh compress defconfig
2019-03-21 08:41:01 -04:00
Hamish Willee
257b90958f
Correct links to example docs
2019-03-15 08:05:54 +01:00
David Sidrane
edd9f91a19
board:Set larger stack margin
2019-03-01 23:45:48 -05:00
Beat Küng
717e52fa57
osd: rename driver to atxxxx
2019-02-19 10:55:55 +01:00
DanielePettenuzzo
c3f9294b49
omnibus: initial osd driver for omnibus board
2019-02-19 10:55:55 +01:00
Daniel Agar
739a02022b
position_estimator_inav: move to examples (start deprecation)
2019-01-27 22:15:39 +01:00
David Sidrane
b478719079
omnibus_f4sd:Fully remove console
2019-01-25 06:32:37 -08:00
David Sidrane
3032643a0c
omnibus_f4sd: Inital commit NuttX 7.27+
2019-01-25 06:32:37 -08:00
David Sidrane
8f308efa88
upstram NuttX CONFIG_EXAMPLES_NSH_CXXINITIALIZE->CONFIG_SYSTEM_NSH_CXXINITIALIZE
2019-01-25 06:32:37 -08:00
Daniel Agar
2ffb49b734
delete px4_includes.h header and update boards/ to use syslog
2019-01-23 18:25:18 -05:00
Daniel Agar
67e5986c9b
delete obsolete examples/subscriber
2019-01-23 18:25:18 -05:00
Daniel Agar
693ee4808a
delete obsolete examples/publisher
2019-01-23 18:25:18 -05:00
Daniel Agar
320d2e9383
create PX4 platform layer initialization helper ( #11269 )
...
- starts requirements for PX4 modules (hrt, param, etc)
2019-01-22 14:13:20 -05:00
Daniel Agar
fef65bf5c8
ROMFS split rc.board into defaults, sensors, and extras
2019-01-15 23:52:46 -08:00
Daniel Agar
1b8c2c82d5
px4flow start in rc.sensors instead of per board ( #11123 )
...
- fixes #11009
2019-01-01 11:39:40 -05:00
Beat Küng
169722c46f
omnibus rc.board: add transition support to load params from file to FLASH
2018-12-23 15:49:37 -05:00
Beat Küng
2698625be9
omnibus: switch to flash-based params
...
Not all boards have an SD card.
This is a *breaking* change and requires a bootloader change.
2018-12-23 15:49:37 -05:00
Daniel Agar
75b2053243
move uavcan from modules to drivers
2018-12-04 01:06:54 -05:00
Daniel Agar
9d42480f4e
drivers create lights category (directory)
2018-12-04 01:06:54 -05:00
Daniel Agar
d4e06e517a
delete drv_gpio.h, modules/gpio_led, and fmu GPIO ioctls
2018-12-03 16:30:39 +01:00
Daniel Agar
a4830f8d7b
move omnibus_f4sd init to rc.board
2018-12-01 10:03:19 -05:00
Daniel Agar
3e0a3559a9
cmake use standard mechanisms for settings flags
2018-11-26 14:40:14 -08:00
Daniel Agar
c258534aa5
cmake px4_add_board document and cleanup
2018-11-26 14:40:14 -08:00
Daniel Agar
fa0fe4cac6
cmake remove need for platform px4_add_board_os
...
- explicitly set TOOLCHAIN on all NuttX targets
2018-11-26 14:40:14 -08:00
Daniel Agar
ec4c9da253
remove BOARD_NAME from board_config.h and set automatically
2018-11-26 14:40:14 -08:00
Daniel Agar
abb3817d31
boards new split VENDOR_MODEL naming convention
2018-11-26 14:40:14 -08:00
Daniel Agar
f692ad04d0
boards organization
2018-11-26 14:40:14 -08:00