Jenkins HIL disable buzzer and remove redundant px4_fmu-v5 test

.ci/Jenkinsfile-hardware

@@ -218,8 +218,10 @@ pipeline {
             // flash board and watch bootup
             sh './platforms/nuttx/Debug/jlink_gdb_upload.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
+            // status commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
@@ -253,8 +255,10 @@ pipeline {
             // flash board and watch bootup
             sh 'platforms/nuttx/Debug/jlink_gdb_upload.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
+            // status commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
@@ -288,43 +292,10 @@ pipeline {
             // flash board and watch bootup
             sh 'platforms/nuttx/Debug/jlink_gdb_upload.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            // status commands
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "mavlink status"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "mtd status"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param show"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param status"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "perf latency"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "perf"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ps"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "sensors status"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "top once"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "uorb status"'
-            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ver all"'
-            // run tests
-            sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-FTDI_*`'
-          }
-          options {
-            timeout(time: 600, unit: 'SECONDS')
-          }
-        }
-
-        stage('px4_fmu-v5_default') {
-          agent {
-            label 'px4_fmu-v5'
-          }
-          steps {
-            sh 'export'
-            sh 'find /dev/serial'
-            unstash 'px4_fmu-v5_default'
-            // flash board and watch bootup
-            sh './platforms/nuttx/Debug/jlink_gdb_upload.sh  build/px4_fmu-v5_default/px4_fmu-v5_default.elf'
-            sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
@@ -358,8 +329,10 @@ pipeline {
             // flash board and watch bootup
             sh './platforms/nuttx/Debug/jlink_gdb_upload.sh  build/px4_fmu-v5_default/px4_fmu-v5_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
+            // status commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
@@ -393,8 +366,10 @@ pipeline {
             // flash board and watch bootup
             sh './platforms/nuttx/Debug/jlink_gdb_upload.sh  build/px4_fmu-v5_default/px4_fmu-v5_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
+            // status commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
@@ -428,8 +403,10 @@ pipeline {
             // flash board and watch bootup
             sh './platforms/nuttx/Debug/jlink_gdb_upload.sh  build/px4_fmu-v5_default/px4_fmu-v5_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
+            // status commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'
@@ -463,8 +440,10 @@ pipeline {
             // flash board and watch bootup
             sh './platforms/nuttx/Debug/jlink_gdb_upload.sh  build/px4_fmu-v5_default/px4_fmu-v5_default.elf'
             sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
-            // commands
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
+            // status commands
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
+            sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /dev"'
             sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ls /obj"'

Tools/HIL/monitor_firmware_upload.py

@@ -14,7 +14,7 @@ def monitor_firmware_upload(port, baudrate):
 
     finished = 0
 
-    timeout = 30  # 30 seconds
+    timeout = 60  # 60 seconds
     timeout_start = time.time()
     timeout_newline = time.time()