mirror of
https://gitee.com/xiaohuolufeihua/bizhang_-obav.git
synced 2026-05-22 01:12:31 +00:00
Adding px4fmu-v5
This commit is contained in:
David Sidrane
committed by
Lorenz Meier
Lorenz Meier
parent
925102464b
commit
bca8767981
22
nuttx-configs/px4fmu-v5/Kconfig
Normal file
22
nuttx-configs/px4fmu-v5/Kconfig
Normal file
@@ -0,0 +1,22 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_PX4FMU_V5
|
||||
|
||||
config BOARD_HAS_PROBES
|
||||
bool "Board provides GPIO or other Hardware for signaling to timing analyze."
|
||||
default y
|
||||
---help---
|
||||
This board provides GPIO FMU-CH1-6 as PROBE_1-6 to provide timing signals from selected drivers.
|
||||
|
||||
config BOARD_USE_PROBES
|
||||
bool "Enable the use the board provided GPIO FMU-CH1-6 as PROBE_1-6 to provide timing signals from selected drivers"
|
||||
default n
|
||||
depends on BOARD_HAS_PROBES
|
||||
|
||||
---help---
|
||||
Select to use GPIO FMU-CH1-6 to provide timing signals from selected drivers.
|
||||
|
||||
endif
|
||||
569
nuttx-configs/px4fmu-v5/include/board.h
Executable file
569
nuttx-configs/px4fmu-v5/include/board.h
Executable file
@@ -0,0 +1,569 @@
|
||||
/************************************************************************************
|
||||
* nuttx-configs/px4fmu-v5/include/board.h
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Authors: David Sidrane <david_s5@nscdg.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
#ifndef __NUTTX_CONFIG_PX4FMU_V5_INCLUDE_BOARD_H
|
||||
#define __NUTTX_CONFIG_PX4FMU_V5_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include "stm32_rcc.h"
|
||||
#include "stm32_sdmmc.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The px4fmu-v5 board provides the following clock sources:
|
||||
*
|
||||
* X301: 16 MHz crystal for HSE
|
||||
*
|
||||
* So we have these clock source available within the STM32
|
||||
*
|
||||
* HSI: 16 MHz RC factory-trimmed
|
||||
* HSE: 16 MHz crystal for HSE
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 16000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
#define STM32_LSE_FREQUENCY 0
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE = 16,000,000
|
||||
*
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* Subject to:
|
||||
*
|
||||
* 2 <= PLLM <= 63
|
||||
* 192 <= PLLN <= 432
|
||||
* 192 MHz <= PLL_VCO <= 432MHz
|
||||
*
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* Subject to
|
||||
*
|
||||
* PLLP = {2, 4, 6, 8}
|
||||
* SYSCLK <= 216 MHz
|
||||
*
|
||||
* USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
|
||||
* Subject to
|
||||
* The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
|
||||
* and the random number generator need a frequency lower than or equal
|
||||
* to 48 MHz to work correctly.
|
||||
*
|
||||
* 2 <= PLLQ <= 15
|
||||
*/
|
||||
|
||||
/* Highest SYSCLK with USB OTG FS clock = 48 MHz
|
||||
*
|
||||
* PLL_VCO = (16,000,000 / 8) * 216 = 432 MHz
|
||||
* SYSCLK = 432 MHz / 2 = 216 MHz
|
||||
* USB OTG FS, SDMMC and RNG Clock = 432 MHz / 9 = 48 MHz
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(216)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(9)
|
||||
|
||||
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 8) * 216)
|
||||
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
||||
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 9)
|
||||
|
||||
/* Configure factors for PLLSAI clock */
|
||||
|
||||
#define CONFIG_STM32F7_PLLSAI 1
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIN RCC_PLLSAICFGR_PLLSAIN(192)
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIP RCC_PLLSAICFGR_PLLSAIP(8)
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIQ RCC_PLLSAICFGR_PLLSAIQ(4)
|
||||
#define STM32_RCC_PLLSAICFGR_PLLSAIR RCC_PLLSAICFGR_PLLSAIR(2)
|
||||
|
||||
/* Configure Dedicated Clock Configuration Register */
|
||||
|
||||
#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ RCC_DCKCFGR1_PLLI2SDIVQ(1)
|
||||
#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ RCC_DCKCFGR1_PLLSAIDIVQ(1)
|
||||
#define STM32_RCC_DCKCFGR1_PLLSAIDIVR RCC_DCKCFGR1_PLLSAIDIVR(0)
|
||||
#define STM32_RCC_DCKCFGR1_SAI1SRC RCC_DCKCFGR1_SAI1SEL(0)
|
||||
#define STM32_RCC_DCKCFGR1_SAI2SRC RCC_DCKCFGR1_SAI2SEL(0)
|
||||
#define STM32_RCC_DCKCFGR1_TIMPRESRC 0
|
||||
#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0
|
||||
#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0
|
||||
|
||||
|
||||
|
||||
/* Configure factors for PLLI2S clock */
|
||||
|
||||
#define CONFIG_STM32F7_PLLI2S 1
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SP RCC_PLLI2SCFGR_PLLI2SP(2)
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
|
||||
#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
|
||||
|
||||
/* Configure Dedicated Clock Configuration Register 2 */
|
||||
|
||||
#define STM32_RCC_DCKCFGR2_USART1SRC RCC_DCKCFGR2_USART1SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_USART2SRC RCC_DCKCFGR2_USART2SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART4SRC RCC_DCKCFGR2_UART4SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART5SRC RCC_DCKCFGR2_UART5SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_USART6SRC RCC_DCKCFGR2_USART6SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART7SRC RCC_DCKCFGR2_UART7SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_UART8SRC RCC_DCKCFGR2_UART8SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_I2C1SRC RCC_DCKCFGR2_I2C1SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_I2C2SRC RCC_DCKCFGR2_I2C2SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_I2C3SRC RCC_DCKCFGR2_I2C3SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_I2C4SRC RCC_DCKCFGR2_I2C4SEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_LPTIM1SRC RCC_DCKCFGR2_LPTIM1SEL_APB
|
||||
#define STM32_RCC_DCKCFGR2_CECSRC RCC_DCKCFGR2_CECSEL_HSI
|
||||
#define STM32_RCC_DCKCFGR2_CK48MSRC RCC_DCKCFGR2_CK48MSEL_PLL
|
||||
#define STM32_RCC_DCKCFGR2_SDMMCSRC RCC_DCKCFGR2_SDMMCSEL_48MHZ
|
||||
#define STM32_RCC_DCKCFGR2_SDMMC2SRC RCC_DCKCFGR2_SDMMC2SEL_48MHZ
|
||||
#define STM32_RCC_DCKCFGR2_DSISRC RCC_DCKCFGR2_DSISEL_48MHZ
|
||||
|
||||
|
||||
/* Several prescalers allow the configuration of the two AHB buses, the
|
||||
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
|
||||
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
|
||||
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
|
||||
* the low-speed APB domain is 54 MHz.
|
||||
*/
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* SDMMC dividers. Note that slower clocking is required when DMA is disabled
|
||||
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||||
* to service FIFOs in interrupt driven mode. These values have not been
|
||||
* tuned!!!
|
||||
*
|
||||
* SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(118+2)=400 KHz
|
||||
*/
|
||||
|
||||
/* Use the Falling edge of the SDIO_CLK clock to change the edge the
|
||||
* data and commands are change on
|
||||
*/
|
||||
|
||||
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
|
||||
|
||||
#define STM32_SDMMC_INIT_CLKDIV (118 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
|
||||
/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz
|
||||
* DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SDIO_DMA
|
||||
# define STM32_SDMMC_MMCXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#else
|
||||
# define STM32_SDMMC_MMCXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#endif
|
||||
|
||||
/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz
|
||||
* DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz
|
||||
*/
|
||||
//TODO #warning "Check Freq for 24mHz"
|
||||
|
||||
#ifdef CONFIG_SDIO_DMA
|
||||
# define STM32_SDMMC_SDXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#else
|
||||
# define STM32_SDMMC_SDXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
||||
#endif
|
||||
|
||||
/* DMA Channl/Stream Selections *****************************************************/
|
||||
/* Stream selections are arbitrary for now but might become important in the future
|
||||
* if we set aside more DMA channels/streams.
|
||||
*
|
||||
* SDMMC DMA is on DMA2
|
||||
*
|
||||
* SDMMC1 DMA
|
||||
* DMAMAP_SDMMC1_1 = Channel 4, Stream 3 <- may later be used by SPI DMA
|
||||
* DMAMAP_SDMMC1_2 = Channel 4, Stream 6
|
||||
*/
|
||||
|
||||
#define DMAMAP_SDMMC1 DMAMAP_SDMMC1_1
|
||||
|
||||
|
||||
/* FLASH wait states
|
||||
*
|
||||
* --------- ---------- -----------
|
||||
* VDD MAX SYSCLK WAIT STATES
|
||||
* --------- ---------- -----------
|
||||
* 1.7-2.1 V 180 MHz 8
|
||||
* 2.1-2.4 V 216 MHz 9
|
||||
* 2.4-2.7 V 216 MHz 8
|
||||
* 2.7-3.6 V 216 MHz 7
|
||||
* --------- ---------- -----------
|
||||
*/
|
||||
|
||||
#define BOARD_FLASH_WAITSTATES 7
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
/* The px4fmu-v5 board has numerous LEDs but only three, LED_GREEN a Green LED, LED_BLUE
|
||||
* a Blue LED and LED_RED a Red LED, that can be controlled by software.
|
||||
*
|
||||
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
|
||||
* The following definitions are used to access individual LEDs.
|
||||
*/
|
||||
|
||||
/* LED index values for use with board_userled() */
|
||||
|
||||
#define BOARD_LED1 0
|
||||
#define BOARD_LED2 1
|
||||
#define BOARD_LED3 2
|
||||
#define BOARD_NLEDS 3
|
||||
|
||||
#define BOARD_LED_RED BOARD_LED1
|
||||
#define BOARD_LED_GREEN BOARD_LED2
|
||||
#define BOARD_LED_BLUE BOARD_LED3
|
||||
|
||||
/* LED bits for use with board_userled_all() */
|
||||
|
||||
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
||||
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
||||
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
||||
|
||||
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
|
||||
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
|
||||
* events as follows:
|
||||
*
|
||||
*
|
||||
* SYMBOL Meaning LED state
|
||||
* Red Green Blue
|
||||
* ---------------------- -------------------------- ------ ------ ----*/
|
||||
|
||||
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
|
||||
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
|
||||
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
|
||||
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
|
||||
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
|
||||
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
|
||||
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
|
||||
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
|
||||
#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */
|
||||
|
||||
/* Thus if the Green LED is statically on, NuttX has successfully booted and
|
||||
* is, apparently, running normally. If the Red LED is flashing at
|
||||
* approximately 2Hz, then a fatal error has been detected and the system
|
||||
* has halted.
|
||||
*/
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
#define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
|
||||
#define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
|
||||
|
||||
#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */
|
||||
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
|
||||
#define GPIO_USART2_RTS GPIO_USART2_RTS_2 /* PD4 */
|
||||
#define GPIO_USART2_CTS GPIO_USART2_CTS_2 /* PD3 */
|
||||
|
||||
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
|
||||
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
|
||||
#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */
|
||||
#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */
|
||||
|
||||
#define GPIO_UART4_RX GPIO_UART4_RX_4 /* PD0 */
|
||||
#define GPIO_UART4_TX GPIO_UART4_TX_4 /* PD1 */
|
||||
|
||||
#define GPIO_USART6_RX GPIO_USART6_RX_2 /* PG9 */
|
||||
#define GPIO_USART6_TX GPIO_USART6_TX_2 /* PG14 */
|
||||
#define GPIO_USART6_RTS GPIO_USART6_RTS_2 /* PG8 */
|
||||
#define GPIO_USART6_CTT GPIO_USART6_CTS_2 /* PG15 */
|
||||
|
||||
#define GPIO_UART7_RX GPIO_UART7_RX_2 /* PF6 */
|
||||
#define GPIO_UART7_TX GPIO_UART7_TX_1 /* PE8 */
|
||||
|
||||
/* USART8: has no remap
|
||||
*
|
||||
* GPIO_UART7_RX PE0[CN12-64]
|
||||
* GPIO_UART7_TX PE1[CN11-61]
|
||||
*/
|
||||
|
||||
/* UART RX DMA configurations */
|
||||
|
||||
#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2
|
||||
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
|
||||
|
||||
/* CAN
|
||||
*
|
||||
* CAN1 is routed to transceiver.
|
||||
* CAN2 is routed to transceiver.
|
||||
* CAN3 is routed to transceiver.
|
||||
*/
|
||||
#define GPIO_CAN1_RX GPIO_CAN1_RX_5 /* PI9 */
|
||||
#define GPIO_CAN1_TX GPIO_CAN1_TX_4 /* PH13 */
|
||||
#define GPIO_CAN2_RX GPIO_CAN2_RX_1 /* PB12 */
|
||||
#define GPIO_CAN2_TX GPIO_CAN2_TX_1 /* PB13 */
|
||||
#define GPIO_CAN3_RX GPIO_CAN3_RX_1 /* PA8 */
|
||||
#define GPIO_CAN3_TX GPIO_CAN3_TX_1 /* PA15 */
|
||||
|
||||
/* SPI
|
||||
* SPI1 sensors
|
||||
* SPI2 is FRAM.
|
||||
* SPI4 is BARO
|
||||
* SPI6 Reserved
|
||||
*
|
||||
*/
|
||||
|
||||
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
|
||||
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_3 /* PD7 */
|
||||
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_3 /* PG11 */
|
||||
|
||||
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_3 /* PI2 */
|
||||
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_3 /* PI3 */
|
||||
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_5 /* PI1 */
|
||||
|
||||
#define GPIO_SPI4_MISO GPIO_SPI4_MISO_2 /* PE13 */
|
||||
#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_1 /* PE6 */
|
||||
#define GPIO_SPI4_SCK GPIO_SPI4_SCK_1 /* PE2 */
|
||||
|
||||
#define GPIO_SPI5_MISO GPIO_SPI5_MISO_1 /* PF8 */
|
||||
#define GPIO_SPI5_MOSI GPIO_SPI5_MOSI_1 /* PF9 */
|
||||
#define GPIO_SPI5_SCK GPIO_SPI5_SCK_1 /* PF7 */
|
||||
|
||||
#define GPIO_SPI6_MISO GPIO_SPI6_MISO_1 /* PG12 */
|
||||
#define GPIO_SPI6_MOSI GPIO_SPI6_MOSI_3 /* PB5 */
|
||||
#define GPIO_SPI6_SCK GPIO_SPI6_SCK_1 /* PG13 */
|
||||
|
||||
/* I2C
|
||||
*
|
||||
* Each I2C is associated with a U[S]ART
|
||||
* hence the naming I2C2_SDA_UART4 in FMU USAGE spreadsheet
|
||||
*
|
||||
*
|
||||
* I2C3 is not pined out on FMUv5 on 144 pin packages
|
||||
*
|
||||
* The optional _GPIO configurations allow the I2C driver to manually
|
||||
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||
* but are normally-high GPIOs.
|
||||
*
|
||||
*/
|
||||
|
||||
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8] */
|
||||
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */
|
||||
|
||||
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTB | \
|
||||
GPIO_PIN8)
|
||||
|
||||
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTB | \
|
||||
GPIO_PIN9)
|
||||
|
||||
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2 /* PF1 */
|
||||
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2 /* PF0 */
|
||||
|
||||
#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTF | \
|
||||
GPIO_PIN1)
|
||||
|
||||
#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTF | \
|
||||
GPIO_PIN0)
|
||||
|
||||
#define GPIO_I2C3_SCL GPIO_I2C3_SCL_2 /* PH7 */
|
||||
#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2 /* PH8 */
|
||||
|
||||
#define GPIO_I2C3_SCL_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTH | \
|
||||
GPIO_PIN7)
|
||||
|
||||
#define GPIO_I2C3_SDA_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTH | \
|
||||
GPIO_PIN8)
|
||||
|
||||
#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2 /* PF14 */
|
||||
#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2 /* PF15 */
|
||||
|
||||
#define GPIO_I2C4_SCL_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTF | \
|
||||
GPIO_PIN14)
|
||||
|
||||
#define GPIO_I2C4_SDA_GPIO (GPIO_OUTPUT | \
|
||||
GPIO_OPENDRAIN | \
|
||||
GPIO_SPEED_50MHz| \
|
||||
GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTF | \
|
||||
GPIO_PIN14)
|
||||
|
||||
/* SDMMC1
|
||||
*
|
||||
* VDD 3.3
|
||||
* GND
|
||||
* SDMMC1_CK PC12
|
||||
* SDMMC1_CMD PD2
|
||||
* SDMMC1_D0 PC8
|
||||
* SDMMC1_D1 PC9
|
||||
* SDMMC1_D2 PC10
|
||||
* SDMMC1_D3 PC11
|
||||
* GPIO_SDMMC1_NCD PG0
|
||||
*/
|
||||
|
||||
/* USB
|
||||
*
|
||||
* OTG_FS_DM PA11
|
||||
* OTG_FS_DP PA12
|
||||
* VBUS PA9
|
||||
*/
|
||||
|
||||
|
||||
/* Board provides GPIO or other Hardware for signaling to timing analyzer */
|
||||
|
||||
#if defined(CONFIG_BOARD_USE_PROBES)
|
||||
# define PROBE_N(n) (1<<((n)-1))
|
||||
# define PROBE_1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14) /* PE14 */
|
||||
# define PROBE_2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PINA10) /* PA10 */
|
||||
# define PROBE_3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11) /* PE11 */
|
||||
# define PROBE_4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9) /* PE9 */
|
||||
# define PROBE_5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13) /* PD13 */
|
||||
# define PROBE_6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14) /* PD14 */
|
||||
|
||||
# define PROBE_INIT(mask) \
|
||||
do { \
|
||||
if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
|
||||
if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
|
||||
if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
|
||||
if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
|
||||
if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
|
||||
if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
|
||||
} while(0)
|
||||
|
||||
# define PROBE(n,s) do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
|
||||
# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
|
||||
#else
|
||||
# define PROBE_INIT(mask)
|
||||
# define PROBE(n,s)
|
||||
# define PROBE_MARK(n)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /*__NUTTX_CONFIG_PX4FMU_V5_INCLUDE_BOARD_H */
|
||||
42
nuttx-configs/px4fmu-v5/include/nsh_romfsimg.h
Normal file
42
nuttx-configs/px4fmu-v5/include/nsh_romfsimg.h
Normal file
@@ -0,0 +1,42 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* nsh_romfsetc.h
|
||||
*
|
||||
* This file is a stub for 'make export' purposes; the actual ROMFS
|
||||
* must be supplied by the library client.
|
||||
*/
|
||||
|
||||
extern unsigned char romfs_img[];
|
||||
extern unsigned int romfs_img_len;
|
||||
166
nuttx-configs/px4fmu-v5/nsh/Make.defs
Normal file
166
nuttx-configs/px4fmu-v5/nsh/Make.defs
Normal file
@@ -0,0 +1,166 @@
|
||||
############################################################################
|
||||
# configs/px4fmu-v5/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
# Authors: Gregory Nutt <gnutt@nuttx.org>
|
||||
# David Sidrane <david_s5@nscdg.com>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include $(TOPDIR)/PX4_Warnings.mk
|
||||
include $(TOPDIR)/PX4_Config.mk
|
||||
|
||||
#
|
||||
# We only support building with the ARM bare-metal toolchain from
|
||||
# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI${HOST_OS_FIRST_LETTER}
|
||||
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
MAXOPTIMIZATION = -Os
|
||||
|
||||
# Enable precise stack overflow tracking
|
||||
|
||||
ifeq ($(CONFIG_ARMV7M_STACKCHECK),y)
|
||||
INSTRUMENTATIONDEFINES = -finstrument-functions -ffixed-r10
|
||||
endif
|
||||
|
||||
# Pull in *just* libm from the toolchain ... this is grody
|
||||
|
||||
LIBM = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
|
||||
EXTRA_LIBS += $(LIBM)
|
||||
|
||||
# Use our linker script
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
ifeq ($(PX4_WINTOOL),y)
|
||||
# Windows-native toolchains (MSYS)
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
endif
|
||||
|
||||
# Tool versions
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
# Optimization flags
|
||||
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \
|
||||
-fno-strict-aliasing \
|
||||
-fno-strength-reduce \
|
||||
-fomit-frame-pointer \
|
||||
-funsafe-math-optimizations \
|
||||
-fno-builtin-printf \
|
||||
-ffunction-sections \
|
||||
-fdata-sections
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION += -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = --std=gnu99
|
||||
ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x
|
||||
ARCHWARNINGS = $(PX4_ARCHWARNINGS)
|
||||
ARCHCWARNINGS = $(PX4_ARCHWARNINGS) $(PX4_ARCHCWARNINGS)
|
||||
ARCHWARNINGSXX = $(ARCHWARNINGS) $(PX4_ARCHWARNINGSXX)
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
# This seems to be the only way to add linker flags
|
||||
|
||||
EXTRA_LIBS += --warn-common \
|
||||
--gc-sections
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
1409
nuttx-configs/px4fmu-v5/nsh/defconfig
Normal file
1409
nuttx-configs/px4fmu-v5/nsh/defconfig
Normal file
File diff suppressed because it is too large
Load Diff
77
nuttx-configs/px4fmu-v5/nsh/setenv.sh
Executable file
77
nuttx-configs/px4fmu-v5/nsh/setenv.sh
Executable file
@@ -0,0 +1,77 @@
|
||||
#!/bin/bash
|
||||
# nuttx-configs/px4fmu-v5/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
|
||||
|
||||
# This is the path to the location where I installed the devkitARM toolchain
|
||||
# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
179
nuttx-configs/px4fmu-v5/scripts/ld.script
Normal file
179
nuttx-configs/px4fmu-v5/scripts/ld.script
Normal file
@@ -0,0 +1,179 @@
|
||||
/****************************************************************************
|
||||
* nuttx-configs/px4nfmu-v5/scripts/script.ld
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F765IIT6 has 2048 KiB of main FLASH memory. This FLASH memory
|
||||
* can be accessed from either the AXIM interface at address 0x0800:0000 or
|
||||
* from the ITCM interface at address 0x0020:0000.
|
||||
*
|
||||
* Additional information, including the option bytes, is available at at
|
||||
* FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
|
||||
*
|
||||
* In the STM32F765IIT6, two different boot spaces can be selected through
|
||||
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
|
||||
* BOOT_ADD1 option bytes:
|
||||
*
|
||||
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
|
||||
* ST programmed value: Flash on ITCM at 0x0020:0000
|
||||
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
|
||||
* ST programmed value: System bootloader at 0x0010:0000
|
||||
*
|
||||
* NuttX does not modify these option byes. On the unmodified NUCLEO-144
|
||||
* board, the BOOT0 pin is at ground so by default, the STM32F765IIT6 will
|
||||
* boot from address 0x0020:0000 in ITCM FLASH.
|
||||
*
|
||||
* The STM32F765IIT6 also has 512 KiB of data SRAM (in addition to ITCM SRAM).
|
||||
* SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 128 KiB of DTCM SRM beginning at address 0x2000:0000
|
||||
* 2) 368 KiB of SRAM1 beginning at address 0x2002:0000
|
||||
* 3) 16 KiB of SRAM2 beginning at address 0x2007:c000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
itcm (rwx) : ORIGIN = 0x00200000, LENGTH = 2048K
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 2048K
|
||||
dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
sram1 (rwx) : ORIGIN = 0x20020000, LENGTH = 368K
|
||||
sram2 (rwx) : ORIGIN = 0x2007c000, LENGTH = 16K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
EXTERN(_vectors)
|
||||
ENTRY(_stext)
|
||||
|
||||
/*
|
||||
* Ensure that abort() is present in the final object. The exception handling
|
||||
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
|
||||
*/
|
||||
EXTERN(abort)
|
||||
EXTERN(_bootdelay_signature)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
. = ALIGN(32);
|
||||
/*
|
||||
This signature provides the bootloader with a way to delay booting
|
||||
*/
|
||||
_bootdelay_signature = ABSOLUTE(.);
|
||||
FILL(0xffecc2925d7d05c5)
|
||||
. += 8;
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
|
||||
/*
|
||||
* This is a hack to make the newlib libm __errno() call
|
||||
* use the NuttX get_errno_ptr() function.
|
||||
*/
|
||||
__errno = get_errno_ptr;
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Init functions (static constructors and the like)
|
||||
*/
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
KEEP(*(.init_array .init_array.*))
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Construction data for parameters.
|
||||
*/
|
||||
__param ALIGN(4): {
|
||||
__param_start = ABSOLUTE(.);
|
||||
KEEP(*(__param*))
|
||||
__param_end = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram1 AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram1
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
86
nuttx-configs/px4fmu-v5/src/Makefile
Normal file
86
nuttx-configs/px4fmu-v5/src/Makefile
Normal file
@@ -0,0 +1,86 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = empty.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
ifneq ($(BOARD_CONTEXT),y)
|
||||
context:
|
||||
endif
|
||||
|
||||
-include Make.dep
|
||||
4
nuttx-configs/px4fmu-v5/src/empty.c
Normal file
4
nuttx-configs/px4fmu-v5/src/empty.c
Normal file
@@ -0,0 +1,4 @@
|
||||
/*
|
||||
* There are no source files here, but libboard.a can't be empty, so
|
||||
* we have this empty source file to keep it company.
|
||||
*/
|
||||
Reference in New Issue
Block a user