icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)

- include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2026-05-21 01:12:11 +00:00 · 2021-04-04 21:18:16 -04:00
parent c6a0161047
commit ad934b4911
57 changed files with 1076 additions and 98 deletions
--- a/boards/cuav/nora/test.cmake
+++ b/boards/cuav/nora/test.cmake
@@ -0,0 +1,139 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR cuav
+	MODEL nora
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	BUILD_BOOTLOADER
+	TESTING
+	UAVCAN_INTERFACES 2
+	UAVCAN_TIMER_OVERRIDE 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS1
+		GPS2:/dev/ttyS2
+		TEL2:/dev/ttyS3
+		# CONSOLE: /dev/ttyS4
+		# RC: /dev/ttyS5
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/bosch/bmi088
+		imu/invensense/icm20649
+		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
+		#irlock
+		lights # all available light drivers
+		lights/rgbled_pwm
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_out_sim
+		pwm_out
+		rc_input
+		roboclaw
+		rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
+		#matlab_csv_serial
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
+	)