px4_fmu-v5x:Use px4_platform_configure

boards/px4/fmu-v5x/nuttx-config/scripts/script.ld

@@ -90,6 +90,7 @@ ENTRY(_stext)
  */
 EXTERN(abort)
 EXTERN(_bootdelay_signature)
+EXTERN(board_get_manifest)
 
 SECTIONS
 {

boards/px4/fmu-v5x/src/CMakeLists.txt

@@ -37,6 +37,7 @@ add_library(drivers_board
 	init.c
 	led.c
 	manifest.c
+	mtd.cpp
 	sdio.c
 	spi.cpp
 	timer_config.cpp

boards/px4/fmu-v5x/src/board_config.h

@@ -116,8 +116,6 @@
 #define GPIO_I2C4_DRDY1_BMP388      /* PG5  */  (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN5)
 #define GPIO_PG6                    /* PG6  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN6)
 
-#define PX4_I2C_BUS_MTD 4
-
 /*
  * ADC channels
  *
@@ -432,6 +430,9 @@
 
 #define BOARD_NUM_IO_TIMERS 5
 
+
+#define PX4_I2C_BUS_MTD      4,5
+
 __BEGIN_DECLS
 
 /****************************************************************************************************

boards/px4/fmu-v5x/src/init.c

@@ -280,5 +280,9 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 
 #endif /* CONFIG_MMCSD */
 
+	/* Configure the HW based on the manifest */
+
+	px4_platform_configure();
+
 	return OK;
 }

boards/px4/fmu-v5x/src/mtd.cpp

@@ -0,0 +1,126 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <nuttx/spi/spi.h>
+#include <px4_platform_common/px4_manifest.h>
+//                                                              KiB BS    nB
+static const px4_mft_device_t spi5 = {             // FM25V02A on FMUM 32K 512 X 64
+	.bus_type = px4_mft_device_t::SPI,
+	.devid    = SPIDEV_FLASH(0)
+};
+static const px4_mft_device_t i2c3 = {             // 24LC64T on Base  8K 32 X 256
+	.bus_type = px4_mft_device_t::I2C,
+	.devid    = PX4_MK_I2C_DEVID(3, 0x51)
+};
+static const px4_mft_device_t i2c4 = {             // 24LC64T on IMU   8K 32 X 256
+	.bus_type =  px4_mft_device_t::I2C,
+	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
+};
+
+
+static const px4_mtd_entry_t fmum_fram = {
+	.device = &spi5,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_PARAMETERS,
+			.path = "/fs/mtd_params",
+			.nblocks = 32
+		},
+		{
+			.type = MTD_WAYPOINTS,
+			.path = "/fs/mtd_waypoints",
+			.nblocks = 32
+
+		}
+	},
+};
+
+static const px4_mtd_entry_t base_eeprom = {
+	.device = &i2c3,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_MFT,
+			.path = "/fs/mtd_mft",
+			.nblocks = 248
+		},
+		{
+			.type = MTD_NET,
+			.path = "/fs/mtd_net",
+			.nblocks = 8 // 256 = 32 * 8
+
+		}
+	},
+};
+
+static const px4_mtd_entry_t imu_eeprom = {
+	.device = &i2c4,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_ID,
+			.path = "/fs/mtd_id",
+			.nblocks = 8 // 256 = 32 * 8
+		},
+		{
+			.type = MTD_CALDATA,
+			.path = "/fs/mtd_caldata",
+			.nblocks = 248
+		}
+	},
+};
+
+static const px4_mtd_manifest_t board_mtd_config = {
+	.nconfigs   = 3,
+	.entries = {
+		&fmum_fram,
+		&base_eeprom,
+		&imu_eeprom
+	}
+};
+
+static const px4_mft_entry_s mtd_mft = {
+	.type = MTD,
+	.pmft = (void *) &board_mtd_config,
+};
+
+static const px4_mft_s mft = {
+	.nmft = 1,
+	.mfts = &mtd_mft
+};
+
+const px4_mft_s *board_get_manifest(void)
+{
+	return &mft;
+}