yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-22 01:12:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

New board: SP Racing H7 Extreme

Browse Source 
Authored-by: igor.misic <igor.misic@rimac@automobili.hr>
This commit is contained in:
Igor Mišić
2020-08-03 21:32:58 +02:00
committed by GitHub
parent ba640acfcc
commit 7eaa48e36f
29 changed files with 7173 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
boards/spracing/h7extreme/nuttx-config/Kconfig Normal file
View File

@@ -0,0 +1,24 @@
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
config BOARD_HAS_PROBES
bool "Board provides GPIO or other Hardware for signaling to timing analyze."
default y
---help---
This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
config BOARD_USE_PROBES
bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
default n
depends on BOARD_HAS_PROBES
---help---
Select to use GPIO FMU-CH1-5, CAP1-6 to provide timing signals from selected drivers.
config STM32_RAMFUNCS
bool "Use stm32_board_clockconfig as ram function."
default y
select ARCH_HAVE_RAMFUNCS

506
boards/spracing/h7extreme/nuttx-config/include/board.h Normal file
View File

@@ -0,0 +1,506 @@
/************************************************************************************
* nuttx-configs/spracing/h7extreme/include/board.h
*
* Copyright (C) 2016-2020 Gregory Nutt. All rights reserved.
* Authors: Igor Misic <igy1000mb@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __NUTTX_CONFIG_SPRACING_H7EXTREME_INCLUDE_BOARD_H
#define __NUTTX_CONFIG_SPRACING_H7EXTREME_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include "board_dma_map.h"
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdmmc.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The sp racing h7 extreme board provides the following clock sources:
*
* X1: 25 MHz crystal for HSE
*
* So we have these clock source available within the STM32
*
* HSI: 64 MHz RC factory-trimmed
* HSE: 25 MHz crystal for HSE
*/
#define STM32_BOARD_XTAL 8000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE = 8,000,000
*
* PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* Subject to:
*
* 1 <= PLLM <= 63
* 4 <= PLLN <= 512
* 150 MHz <= PLL_VCOL <= 420MHz
* 192 MHz <= PLL_VCOH <= 836MHz
*
* SYSCLK = PLL_VCO / PLLP
* CPUCLK = SYSCLK / D1CPRE
* Subject to
*
* PLLP1 = {2, 4, 6, 8, ..., 128}
* PLLP2,3 = {2, 3, 4, ..., 128}
* CPUCLK <= 480 MHz
*/
#define STM32_BOARD_USEHSE
#define STM32_PLLCFG_PLLSRC RCC_PLLCKSELR_PLLSRC_HSE
/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
*
* PLL1_VCO = (25,000,000 / 5) * 160 = 800 MHz
*
* PLL1P = PLL1_VCO/2 = 800 MHz / 2 = 400 MHz
* PLL1Q = PLL1_VCO/4 = 800 MHz / 4 = 200 MHz
* PLL1R = PLL1_VCO/8 = 800 MHz / 8 = 100 MHz
*/
#define STM32_PLLCFG_PLL1CFG (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP1EN | \
RCC_PLLCFGR_DIVQ1EN | \
RCC_PLLCFGR_DIVR1EN)
#define STM32_PLLCFG_PLL1M RCC_PLLCKSELR_DIVM1(2)
#define STM32_PLLCFG_PLL1N RCC_PLL1DIVR_N1(200)
#define STM32_PLLCFG_PLL1P RCC_PLL1DIVR_P1(2)
#define STM32_PLLCFG_PLL1Q RCC_PLL1DIVR_Q1(4)
#define STM32_PLLCFG_PLL1R RCC_PLL1DIVR_R1(2)
#define STM32_VCO1_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 200)
#define STM32_PLL1P_FREQUENCY (STM32_VCO1_FREQUENCY / 2)
#define STM32_PLL1Q_FREQUENCY (STM32_VCO1_FREQUENCY / 4)
#define STM32_PLL1R_FREQUENCY (STM32_VCO1_FREQUENCY / 2)
/* PLL2 */
#define STM32_PLLCFG_PLL2CFG (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP2EN | \
RCC_PLLCFGR_DIVQ2EN | \
RCC_PLLCFGR_DIVR2EN)
#define STM32_PLLCFG_PLL2M RCC_PLLCKSELR_DIVM2(4)
#define STM32_PLLCFG_PLL2N RCC_PLL2DIVR_N2(260)
#define STM32_PLLCFG_PLL2P RCC_PLL2DIVR_P2(2)
#define STM32_PLLCFG_PLL2Q RCC_PLL2DIVR_Q2(10)
#define STM32_PLLCFG_PLL2R RCC_PLL2DIVR_R2(2)
#define STM32_VCO2_FREQUENCY ((STM32_HSE_FREQUENCY / 4) * 260)
#define STM32_PLL2P_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2Q_FREQUENCY (STM32_VCO2_FREQUENCY / 10)
#define STM32_PLL2R_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
/* PLL3 */
#define STM32_PLLCFG_PLL3CFG (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP3EN | \
RCC_PLLCFGR_DIVQ3EN | \
RCC_PLLCFGR_DIVR3EN)
#define STM32_PLLCFG_PLL3M RCC_PLLCKSELR_DIVM3(2)
#define STM32_PLLCFG_PLL3N RCC_PLL3DIVR_N3(50)
#define STM32_PLLCFG_PLL3P RCC_PLL3DIVR_P3(2)
#define STM32_PLLCFG_PLL3Q RCC_PLL3DIVR_Q3(2)
#define STM32_PLLCFG_PLL3R RCC_PLL3DIVR_R3(2)
#define STM32_VCO3_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 50)
#define STM32_PLL3P_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
#define STM32_PLL3Q_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
#define STM32_PLL3R_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
/* SYSCLK = PLL1P = 400MHz
* CPUCLK = SYSCLK / 1 = 400 MHz
*/
#define STM32_RCC_D1CFGR_D1CPRE (RCC_D1CFGR_D1CPRE_SYSCLK)
#define STM32_SYSCLK_FREQUENCY (STM32_PLL1P_FREQUENCY)
#define STM32_CPUCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 1)
/* Configure Clock Assignments */
/* AHB clock (HCLK) is SYSCLK/2 (200 MHz max)
* HCLK1 = HCLK2 = HCLK3 = HCLK4 = 200
*/
#define STM32_RCC_D1CFGR_HPRE RCC_D1CFGR_HPRE_SYSCLKd2 /* HCLK = SYSCLK / 2 */
#define STM32_ACLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* ACLK in D1, HCLK3 in D1 */
#define STM32_HCLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* HCLK in D2, HCLK4 in D3 */
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/2 (100 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE1 RCC_D2CFGR_D2PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB2 clock (PCLK2) is HCLK/2 (50 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE2 RCC_D2CFGR_D2PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB3 clock (PCLK3) is HCLK/2 (50 MHz) */
#define STM32_RCC_D1CFGR_D1PPRE RCC_D1CFGR_D1PPRE_HCLKd2 /* PCLK3 = HCLK / 2 */
#define STM32_PCLK3_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB4 clock (PCLK4) is HCLK/4 (50 MHz) */
#define STM32_RCC_D3CFGR_D3PPRE RCC_D3CFGR_D3PPRE_HCLKd2 /* PCLK4 = HCLK / 2 */
#define STM32_PCLK4_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timer clock frequencies */
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM15_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM16_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM17_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Kernel Clock Configuration
*
* Note: look at Table 54 in ST Manual
*/
/* I2C123 clock source */
#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
/* SPI123 clock source */
#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL1
/* SPI45 clock source */
#define STM32_RCC_D2CCIP1R_SPI45SRC RCC_D2CCIP1R_SPI45SEL_APB
/* USB 1 and 2 clock source */
#define STM32_RCC_D2CCIP2R_USBSRC RCC_D2CCIP2R_USBSEL_HSI48
/* ADC 1 2 3 clock source */
#define STM32_RCC_D3CCIPR_ADCSEL RCC_D3CCIPR_ADCSEL_PLL2
/* QSPI clock source */
#define STM32_RCC_D1CCIPR_QSPISEL RCC_D1CCIPR_QSPISEL_PLL2
/* FLASH wait states
*
* ------------ ---------- -----------
* Vcore MAX ACLK WAIT STATES
* ------------ ---------- -----------
* 1.15-1.26 V 70 MHz 0
* (VOS1 level) 140 MHz 1
* 210 MHz 2
* 1.05-1.15 V 55 MHz 0
* (VOS2 level) 110 MHz 1
* 165 MHz 2
* 220 MHz 3
* 0.95-1.05 V 45 MHz 0
* (VOS3 level) 90 MHz 1
* 135 MHz 2
* 180 MHz 3
* 225 MHz 4
* ------------ ---------- -----------
*/
#define BOARD_FLASH_WAITSTATES 2
/* SDMMC definitions ********************************************************/
/* Init 400kHz, freq = PLL1Q/(2*div) div = PLL1Q/(2*freq) */
#define STM32_SDMMC_INIT_CLKDIV (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div = PLL1Q/(2*freq)
* div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
*/
#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
# define STM32_SDMMC_MMCXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_MMCXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
# define STM32_SDMMC_SDXFR_CLKDIV (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_SDXFR_CLKDIV (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
/* LED definitions ******************************************************************/
/* The sp racing h7 extreme board has three, LED_GREEN a Green LED, LED_BLUE
* Red LED can be controlled by software.
*
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
* The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_NLEDS 1
#define BOARD_LED_RED BOARD_LED1
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
* events as follows:
*
*
* SYMBOL Meaning LED state
* Red Green Blue
* ---------------------- -------------------------- ------ ------ ----*/
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
#define LED_IDLE 8 /* MCU is in sleep mode ON OFF OFF */
/* Alternate function pin selections ************************************************/
#define GPIO_USART1_RX GPIO_USART1_RX_1 /* PB15 */
#define GPIO_USART1_TX GPIO_USART1_TX_1 /* PB14 */
#define GPIO_USART2_RX 0 /* Not in use */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_UART4_RX GPIO_UART4_RX_5 /* PD0 */
#define GPIO_UART4_TX GPIO_UART4_TX_5 /* PD1 */
#define GPIO_UART5_RX GPIO_UART5_RX_2 /* PB5 */
#define GPIO_UART5_TX GPIO_UART5_TX_1 /* PB13 */
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
#define GPIO_UART8_RX GPIO_UART8_RX_1 /* PE0 */
#define GPIO_UART8_TX GPIO_UART8_TX_1 /* PE1 */
/* SPI
* SPI2 is gyro 1
* SPI3 is gyro 2
* SPI4 is BARO
*/
//#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
//#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_3 /* PD7 */
//#define GPIO_SPI1_SCK GPIO_SPI1_SCK_3 /* PG11 */
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_2 /* PC2 */
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_3 /* PC3 */
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_5 /* PD3 */
#define GPIO_SPI3_MISO GPIO_SPI3_MISO_1 /* PB4 */
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_1 /* PD6 */
#define GPIO_SPI3_SCK GPIO_SPI3_SCK_1 /* PB3 */
#define GPIO_SPI4_MISO GPIO_SPI4_MISO_1 /* PE13 */
#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_1 /* PE14 */
#define GPIO_SPI4_SCK GPIO_SPI4_SCK_1 /* PE12 */
/* I2C
*
* Each I2C is associated with a U[S]ART
* hence the naming I2C2_SDA_UART4 in FMU USAGE spreadsheet
*
* The optional _GPIO configurations allow the I2C driver to manually
* reset the bus to clear stuck slaves. They match the pin configuration,
* but are normally-high GPIOs.
*
*/
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
/* SDMMC1
*
* VDD 3.3
* GND
* SDMMC1_CK PC12
* SDMMC1_CMD PD2
* SDMMC1_D0 PC8
* SDMMC1_D1 PC9
* SDMMC1_D2 PC10
* SDMMC1_D3 PC11
* GPIO_SDMMC1_NCD PG0
*/
/* USB
*
* OTG_FS_DM PA11
* OTG_FS_DP PA12
* VBUS PA9
*/
/* Board provides GPIO or other Hardware for signaling to timing analyzer */
#if defined(CONFIG_BOARD_USE_PROBES)
# include "stm32_gpio.h"
# define PROBE_N(n) (1<<((n)-1))
# define PROBE_1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14) /* PE14 AUX1 */
# define PROBE_2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN10) /* PA10 AUX2 */
# define PROBE_3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11) /* PE11 AUX3 */
# define PROBE_4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9) /* PE9 AUX4 */
# define PROBE_5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13) /* PD13 AUX5 */
# define PROBE_6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14) /* PD14 FMU_CAP6 */
# define PROBE_7 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN6) /* PH6 FMU_CAP5 */
# define PROBE_8 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN9) /* PH9 FMU_CAP4 */
# define PROBE_9 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN5) /* PA5 FMU_CAP3 */
# define PROBE_10 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN3) /* PB3 FMU_CAP2 */
# define PROBE_11 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11) /* PB11 FMU_CAP1 */
# define PROBE_INIT(mask) \
do { \
if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
if ((mask)& PROBE_N(9)) { stm32_configgpio(PROBE_9); } \
if ((mask)& PROBE_N(10)) { stm32_configgpio(PROBE_10); } \
if ((mask)& PROBE_N(11)) { stm32_configgpio(PROBE_11); } \
} while(0)
# define PROBE(n,s) do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
#else
# define PROBE_INIT(mask)
# define PROBE(n,s)
# define PROBE_MARK(n)
#endif
/* QSPI configuration */
#define CONFIG_STM32H7_QUADSPI
#define CONFIG_STM32H7_QSPI_FLASH_SIZE 16777216 /* bytes */
#define CONFIG_STM32H7_QSPI_FIFO_THESHOLD 1
#define CONFIG_STM32H7_QSPI_CSHT 1 /* HIGH TIME 1 CYCLE */
#define GPIO_QSPI_CS GPIO_QUADSPI_BK1_NCS_3 /* PB10 */
#define GPIO_QSPI_IO0 GPIO_QUADSPI_BK1_IO0_3 /* PD11 */
#define GPIO_QSPI_IO1 GPIO_QUADSPI_BK1_IO1_3 /* PD12 */
#define GPIO_QSPI_IO2 GPIO_QUADSPI_BK1_IO2_1 /* PE2 */
#define GPIO_QSPI_IO3 GPIO_QUADSPI_BK1_IO3_2 /* PD13 */
#define GPIO_QSPI_SCK GPIO_QUADSPI_CLK_1 /* PB2 */
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /*__NUTTX_CONFIG_SPRACING_H7EXTREME_INCLUDE_BOARD_H */

115
boards/spracing/h7extreme/nuttx-config/include/board_dma_map.h Normal file
View File

@@ -0,0 +1,115 @@
/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
/*
| DMA1 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
| Channel 0 | SPI3_RX_1 | SPDIFRX_DT | SPI3_RX_2 | SPI2_RX | SPI2_TX | SPI3_TX_1 | SPDIFRX_CS | SPI3_TX_2 |
| Channel 1 | I2C1_RX | I2C3_RX | TIM7_UP_1 | - | TIM7_UP_2 | I2C1_RX_1 | I2C1_TX | I2C1_TX_1 |
| Channel 2 | TIM4_CH1 | - | I2C4_RX | TIM4_CH2 | - | I2C4_RX | TIM4_UP | TIM4_CH3 |
| Channel 3 | - | TIM2_UP_1 | I2C3_RX_1 | - | I2C3_TX | TIM2_CH1 | TIM2_CH2 | TIM2_UP_2 |
| | | TIM2_CH3 | | | | | TIM2_CH4_1 | TIM2_CH4_2 |
| Channel 4 | UART5_RX | USART3_RX | UART4_RX | USART3_TX_1 | UART4_TX | USART2_RX | USART2_TX | UART5_TX |
| Channel 5 | UART8_TX | UART7_TX | TIM3_CH4 | UART7_RX | TIM3_CH1 | TIM3_CH2 | UART8_RX | TIM3_CH3 |
| | | | TIM3_UP | | TIM3_TRIG | | | |
| Channel 6 | TIM5_CH3 | TIM5_CH4_1 | TIM5_CH1 | TIM5_CH4_2 | TIM5_CH2 | - | TIM5_UP_2 | - |
| | TIM5_UP_1 | TIM5_TRIG_1 | | TIM5_TRIG_2 | | | | |
| Channel 7 | - | TIM6_UP | I2C2_RX | I2C2_RX_1 | USART3_TX_2 | DAC1 | DAC2 | I2C2_TX |
| Channel 8 | I2C3_TX | I2C4_RX | - | - | I2C2_TX | - | I2C4_TX | - |
| Channel 9 | - | SPI2_RX | - | - | - | - | SPI2_TX | - |
| | | | | | | | | |
| Usage | | | TIM3_UP | | | USART2_RX | TIM5_UP_2 | |
| DMA2 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
| Channel 0 | ADC1_1 | SAI1_A | TIM8_CH1_1 | SAI1_A_1 | ADC1_2 | SAI1_B_1 | TIM1_CH1_1 | SAI2_B_2 |
| | | | TIM8_CH2_1 | | | | TIM1_CH2_1 | |
| | | | TIM8_CH3_1 | | | | TIM1_CH3_1 | |
| Channel 1 | - | DCMI_1 | ADC2_1 | ADC2_2 | SAI1_B | SPI6_TX | SPI6_RX | DCMI_2 |
| Channel 2 | ADC3_1 | ADC3_2 | - | SPI5_RX_1 | SPI5_TX_1 | CRYP_OUT | CRYP_IN | HASH_IN |
| Channel 3 | SPI1_RX_1 | - | SPI1_RX_2 | SPI1_TX_1 | SAI2_A | SPI1_TX_2 | SAI2_B | QUADSPI |
| Channel 4 | SPI4_RX_1 | SPI4_TX_1 | USART1_RX_1 | SDMMC1_1 | - | USART1_RX_2 | SDMMC1_2 | USART1_TX |
| Channel 5 | - | USART6_RX_1 | USART6_RX_2 | SPI4_RX_2 | SPI4_TX_2 | - | USART6_TX_1 | USART6_TX_2 |
| Channel 6 | TIM1_TRIG_1 | TIM1_CH1_2 | TIM1_CH2_2 | TIM1_CH1 | TIM1_CH4 | TIM1_UP | TIM1_CH3_2 | - |
| | | | | | TIM1_TRIG_2 | | | |
| | | | | | TIM1_COM | | | |
| Channel 7 | - | TIM8_UP | TIM8_CH1_2 | TIM8_CH2_2 | TIM8_CH3_2 | SPI5_RX_2 | SPI5_TX_2 | TIM8_CH4 |
| | | | | | | | | TIM8_TRIG |
| | | | | | | | | TIM8_COM |
| Channel 8 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 |
| Channel 9 | JPEG_IN | JPEG_OUT | SPI4_TX | JPEG_IN | JPEG_OUT | SPI5_RX | - | - |
| Channel 10 | SAI1_B | SAI2_B | SAI2_A | - | - | - | SAI1_A | - |
| Channel 11 | SDMMC2 | - | QUADSPI | - | - | SDMMC2 | - | - |
| | | | | | | | | |
| Usage | SPI4_RX_1 | TIM8_UP | | | SPI4_TX_2 | TIM1_UP | | |
*/
#define STM32_DMA_MAP(d,s,c) ((d) << 6 | (s) << 3 | (c))
#define DMA_CHAN0 (0)
#define DMA_CHAN4 (4)
#define DMA_CHAN5 (5)
#define DMAMAP_SPI2_RX STM32_DMA_MAP(DMA1,DMA_STREAM3,DMA_CHAN0)
#define DMAMAP_SPI2_TX STM32_DMA_MAP(DMA1,DMA_STREAM4,DMA_CHAN0)
#define DMAMAP_SPI3_RX_2 STM32_DMA_MAP(DMA1,DMA_STREAM2,DMA_CHAN0)
#define DMAMAP_SPI3_TX_1 STM32_DMA_MAP(DMA1,DMA_STREAM5,DMA_CHAN0)
#define DMAMAP_SPI4_RX_1 STM32_DMA_MAP(DMA2,DMA_STREAM0,DMA_CHAN4)
#define DMAMAP_SPI4_TX_2 STM32_DMA_MAP(DMA2,DMA_STREAM4,DMA_CHAN5)
// DMA1 Channel/Stream Selections
//--------------------------------------------//---------------------------//----------------
// DMAMAP_TIM5_UP_1 // DMA1, Stream 0, Channel 6 (DSHOT)
// AVAILABLE // DMA1, Stream 1
#define DMAMAP_SPI3_RX DMAMAP_SPI3_RX_2 // DMA1, Stream 2, Channel 0 (SPI sensors ICM20602 2)
// DMAMAP_SPI2_RX // DMA1, Stream 3, Channel 0 (SPI sensors ICM20602 1)
// DMAMAP_SPI2_TX // DMA1, Stream 4, Channel 0 (SPI sensors ICM20602 1)
#define DMAMAP_SPI3_TX DMAMAP_SPI3_TX_1 // DMA1, Stream 5, Channel 0 (SPI sensors ICM20602 2)
// DMAMAP_TIM4_UP // DMA1, Stream 6, Channel 2 (DSHOT)
// AVAILABLE // DMA1, Stream 7
// DMA2 Channel/Stream Selections
//--------------------------------------------//---------------------------//----------------
#define DMAMAP_SPI4_RX DMAMAP_SPI4_RX_1 // DMA2, Stream 0, Channel 4 (SPI OSD)
// DMAMAP_TIM8_UP // DMA2, Stream 1, Channel 7 (DSHOT)
// AVAILABLE // DMA1, Stream 2
// AVAILABLE // DMA1, Stream 3
#define DMAMAP_SPI4_TX DMAMAP_SPI4_TX_2 // DMA2, Stream 4, Channel 5 (SPI OSD)
// AVAILABLE // DMA2, Stream 5
// AVAILABLE // DMA1, Stream 6
// AVAILABLE // DMA1, Stream 7

230
boards/spracing/h7extreme/nuttx-config/nsh/defconfig Normal file
View File

@@ -0,0 +1,230 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_OS_API is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_TIME is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32h7"
CONFIG_ARCH_CHIP_STM32H743ZI=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_ITCM=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_CRASHDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=95150
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_C99_BOOL8=y
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0x004b
CONFIG_CDCACM_PRODUCTSTR="PX4 SP RACING H7 EXTREME"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x3162
CONFIG_CDCACM_VENDORSTR="SPRacing"
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_EXPERIMENTAL=y
CONFIG_FAT_DMAMEMORY=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_LFN_ALIAS_HASH=y
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MAX_TASKS=64
CONFIG_MAX_WDOGPARMS=2
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MMCSD=y
CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
CONFIG_MMCSD_SDIO=y
CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
CONFIG_MM_REGIONS=3
CONFIG_NFILE_DESCRIPTORS=15
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_DISABLE_IFCONFIG=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_DISABLE_MB=y
CONFIG_NSH_DISABLE_MH=y
CONFIG_NSH_DISABLE_TELNETD=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=15
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_PIPES=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=50
CONFIG_PREALLOC_WDOGS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAM_SIZE=294912
CONFIG_RAM_START=0x30000000
CONFIG_RAW_BINARY=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1632
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SDMMC1_SDIO_MODE=y
CONFIG_SEM_NNESTPRIO=8
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_STM32H7_ADC1=y
CONFIG_STM32H7_BBSRAM=y
CONFIG_STM32H7_BBSRAM_FILES=5
CONFIG_STM32H7_BKPSRAM=y
CONFIG_STM32H7_CUSTOM_CLOCKCONFIG=y
CONFIG_STM32H7_DMA1=y
CONFIG_STM32H7_DMA2=y
CONFIG_STM32H7_DMACAPABLE=y
CONFIG_STM32H7_DTCMEXCLUDE=y
CONFIG_STM32H7_DTCM_PROCFS=y
CONFIG_STM32H7_I2C1=y
CONFIG_STM32H7_I2C_DYNTIMEO=y
CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
CONFIG_STM32H7_OTGFS=y
CONFIG_STM32H7_PROGMEM=y
CONFIG_STM32H7_RTC=y
CONFIG_STM32H7_RTC_HSECLOCK=y
CONFIG_STM32H7_RTC_MAGIC_REG=1
CONFIG_STM32H7_SAVE_CRASHDUMP=y
CONFIG_STM32H7_SDMMC1=y
CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32H7_SPI2=y
CONFIG_STM32H7_SPI2_DMA=y
CONFIG_STM32H7_SPI2_DMA_BUFFER=1024
CONFIG_STM32H7_SPI3=y
CONFIG_STM32H7_SPI3_DMA=y
CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
CONFIG_STM32H7_SPI4=y
CONFIG_STM32H7_SPI4_DMA=y
CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
CONFIG_STM32H7_SPI_DMA=y
CONFIG_STM32H7_SPI_DMATHRESHOLD=8
CONFIG_STM32H7_TIM1=y
CONFIG_STM32H7_TIM3=y
CONFIG_STM32H7_UART4=y
CONFIG_STM32H7_UART5=y
CONFIG_STM32H7_UART8=y
CONFIG_STM32H7_USART1=y
CONFIG_STM32H7_USART2=y
CONFIG_STM32H7_USART3=y
CONFIG_STM32H7_USART6=y
CONFIG_STM32H7_USART_BREAKS=y
CONFIG_STM32H7_USART_INVERT=y
CONFIG_STM32H7_USART_SINGLEWIRE=y
CONFIG_STM32H7_USART_SWAP=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_TIME_EXTENDED=y
CONFIG_TTY_SIGINT=y
CONFIG_TTY_SIGSTP=y
CONFIG_UART4_BAUD=57600
CONFIG_UART4_RXBUFSIZE=600
CONFIG_UART4_TXBUFSIZE=1500
CONFIG_UART5_BAUD=57600
CONFIG_UART5_RXBUFSIZE=600
CONFIG_UART5_TXBUFSIZE=1500
CONFIG_UART8_BAUD=57600
CONFIG_UART8_RXBUFSIZE=600
CONFIG_UART8_SERIAL_CONSOLE=y
CONFIG_UART8_TXBUFSIZE=1500
CONFIG_USART1_BAUD=57600
CONFIG_USART1_RXBUFSIZE=600
CONFIG_USART1_TXBUFSIZE=1500
CONFIG_USART2_BAUD=57600
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_TXBUFSIZE=1500
CONFIG_USART3_BAUD=57600
CONFIG_USART3_RXBUFSIZE=600
CONFIG_USART3_TXBUFSIZE=3000
CONFIG_USART6_BAUD=57600
CONFIG_USART6_RXBUFSIZE=600
CONFIG_USART6_TXBUFSIZE=1500
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2688
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WATCHDOG=y

281
boards/spracing/h7extreme/nuttx-config/scripts/script.ld Normal file
View File

@@ -0,0 +1,281 @@
/****************************************************************************
* scripts/script.ld
*
* Copyright (C) 2016, 2019, 2020 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Igor Misic <igy1000mb@gmail.com>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The SP Racing H7 Extreme uses an STM32H750VIT6 has 128Kb of main FLASH memory and
128 MB external NAND FLASH memory.
* The flash memory is partitioned into a User Flash memory and a System
* Flash memory. Each of these memories has two banks:
*
* 1) User Flash memory:
*
* Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
* Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
*
* 2) System Flash memory:
*
* Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
* Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
*
* 3) User option bytes for user configuration, only in Bank 1.
*
* In the STM32H743II, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash memory at 0x0800:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x1FF0:0000
*
* The SP Racing H7 Extreme has a Swtich on board, the BOOT0 pin is at ground so by default,
* the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
* drepresed, then the boot will be from 0x1FF0:0000
*
* The STM32H743ZI also has 1024Kb of data SRAM.
* SRAM is split up into several blocks and into three power domains:
*
* 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
* 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
*
* 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
*
* The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
* DTCM ports. The DTCM-RAM could be used for critical real-time
* data, such as interrupt service routines or stack / heap memory.
* Both DTCM-RAMs can be used in parallel (for load/store operations)
* thanks to the Cortex-M7 dual issue capability.
*
* 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000
*
* This RAM is connected to ITCM 64-bit interface designed for
* execution of critical real-times routines by the CPU.
*
* 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
* through D1 domain AXI bus matrix
*
* 2.1) 512Kb of SRAM beginning at address 0x2400:0000
*
* 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
* through D2 domain AHB bus matrix
*
* 3.1) 128Kb of sram beginning at address 0x3000:0000
* 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
* 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000
*
* sram - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
*
* 4) AHB SRAM (D3 domain) accessible by most of system masters
* through D3 domain AHB bus matrix
*
* 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000
* 4.1) 4Kb of backup RAM beginning at address 0x3880:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*/
MEMORY
{
dtcm (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
sram (xrw) : ORIGIN = 0x24000000, LENGTH = 512K
sram2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K
sram3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K
itcm (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
flash (xrw) : ORIGIN = 0x08000000, LENGTH = 128K
qspi (xrw) : ORIGIN = 0x90100000, LENGTH = 1536K /* FW that run in memory-mapped mode */
qspi2 (xrw) : ORIGIN = 0x90280000, LENGTH = 512K /* FW segment that will be copied to ram and itcm */
conf (xrw) : ORIGIN = 0x90f80000, LENGTH = 64K /* PX4 Config on an single 64kb erasable block. */
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
SECTIONS
{
.itcm_code : {
_start_itcm = ABSOLUTE(.);
. = ALIGN(4);
*modules__mc_att_control.a:*(.text* .rodata*)
*modules__mc_rate_control.a:*(.text* .rodata*)
*modules__rc_update.a:*(.text* .rodata*)
*drivers__mpu6000.a:*(.text* .rodata*)
*drivers__imu__invensense__icm20602.a:*(.text* .rodata*)
*drivers__device.a:*(.text* .rodata*)
*drivers__pwm_out.a:*(.text* .rodata*)
*vehicle_acceleration.a:*(.text* .rodata*)
*vehicle_angular_velocity.a:*(.text* .rodata*)
*modules__attitude_estimator_q.a:*(.text* .rodata*)
*stm32_spi.o(.text* .rodata*)
*stm32_dma.o(.text* .rodata*)
_end_itcm = ABSOLUTE(.);
} > itcm AT > qspi2
_load_itcm = LOADADDR(.itcm_code);
.sram_code : {
_start_sram = ABSOLUTE(.);
. = ALIGN(4);
*drivers__dshot.a:*(.text* .rodata*)
*modules__mc_pos_control.a:*(.text* .rodata*)
*modules__mc_hover_thrust_estimator.a:*(.text* .rodata*)
*modules__sensors.a:*(.text* .rodata*)
*libc.a:*(.text* .rodata*)
*modules__commander.a:*(.text* .rodata*)
*modules__dataman.a:*(.text* .rodata*)
*modules__events.a:*(.text* .rodata*)
*modules__load_mon.a:*(.text* .rodata*)
*modules__logger.a:*(.text* .rodata*)
*battery_status.a:*(.text* .rodata*)
*land_detector.a:*(.text* .rodata*)
*uorb_msgs.a:*(.text* .rodata*)
*arch_spi.a:*(.text* .rodata*)
_end_sram = ABSOLUTE(.);
} > sram AT > qspi2
_load_sram = LOADADDR(.sram_code);
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(32);
/*
This signature provides the bootloader with a way to delay booting
*/
_bootdelay_signature = ABSOLUTE(.);
FILL(0xffecc2925d7d05c5)
. += 8;
*(.text .text.*)
*(.rodata .rodata.*)
*(.fixup)
*(.gnu.warning)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
/*
* This is a hack to make the newlib libm __errno() call
* use the NuttX get_errno_ptr() function.
*/
__errno = get_errno_ptr;
} > qspi
.ramfunc : {
_sramfuncs = ABSOLUTE(.);
. = ALIGN(4);
*(.ramfunc .ramfunc.*)
_eramfuncs = ABSOLUTE(.);
} > sram AT > qspi
_framfuncs = LOADADDR(.ramfunc);
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > qspi
/*
* Construction data for parameters.
*/
__param ALIGN(4): {
__param_start = ABSOLUTE(.);
KEEP(*(__param*))
__param_end = ABSOLUTE(.);
} > qspi
.ARM.extab : {
*(.ARM.extab*)
} > qspi
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > qspi
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > qspi
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

253
boards/spracing/h7extreme/nuttx-config/stackcheck/defconfig Normal file
View File

@@ -0,0 +1,253 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_OS_API is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_TIME is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32h7"
CONFIG_ARCH_CHIP_STM32H743ZI=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_STACKCHECK=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_CRASHDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=95150
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_C99_BOOL8=y
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0x004b
CONFIG_CDCACM_PRODUCTSTR="PX4 SP Racing H7 Extreme"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x3162
CONFIG_CDCACM_VENDORSTR="Holybro"
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_EXPERIMENTAL=y
CONFIG_FAT_DMAMEMORY=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_LFN_ALIAS_HASH=y
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_EXCLUDE_BLOCKS=y
CONFIG_FS_PROCFS_EXCLUDE_MOUNT=y
CONFIG_FS_PROCFS_EXCLUDE_MOUNTS=y
CONFIG_FS_PROCFS_EXCLUDE_PARTITIONS=y
CONFIG_FS_PROCFS_EXCLUDE_USAGE=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MAX_TASKS=64
CONFIG_MAX_WDOGPARMS=2
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MMCSD=y
CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
CONFIG_MMCSD_SDIO=y
CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
CONFIG_MM_REGIONS=3
CONFIG_MTD=y
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_PROGMEM=y
CONFIG_NFILE_DESCRIPTORS=20
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_DISABLE_IFCONFIG=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_DISABLE_MB=y
CONFIG_NSH_DISABLE_MH=y
CONFIG_NSH_DISABLE_TELNETD=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=12
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_NXFONTS_DISABLE_16BPP=y
CONFIG_NXFONTS_DISABLE_1BPP=y
CONFIG_NXFONTS_DISABLE_24BPP=y
CONFIG_NXFONTS_DISABLE_2BPP=y
CONFIG_NXFONTS_DISABLE_32BPP=y
CONFIG_NXFONTS_DISABLE_4BPP=y
CONFIG_NXFONTS_DISABLE_8BPP=y
CONFIG_PIPES=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=50
CONFIG_PREALLOC_WDOGS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1536
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SDMMC1_SDIO_MODE=y
CONFIG_SEM_NNESTPRIO=8
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=32
CONFIG_STM32H7_ADC1=y
CONFIG_STM32H7_BBSRAM=y
CONFIG_STM32H7_BBSRAM_FILES=5
CONFIG_STM32H7_BKPSRAM=y
CONFIG_STM32H7_DMA1=y
CONFIG_STM32H7_DMA2=y
CONFIG_STM32H7_DMACAPABLE=y
CONFIG_STM32H7_DTCMEXCLUDE=y
CONFIG_STM32H7_DTCM_PROCFS=y
CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
CONFIG_STM32H7_I2C1=y
CONFIG_STM32H7_I2C2=y
CONFIG_STM32H7_I2C3=y
CONFIG_STM32H7_I2C4=y
CONFIG_STM32H7_I2C_DYNTIMEO=y
CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
CONFIG_STM32H7_OTGFS=y
CONFIG_STM32H7_PROGMEM=y
CONFIG_STM32H7_RTC=y
CONFIG_STM32H7_RTC_MAGIC_REG=1
CONFIG_STM32H7_SAVE_CRASHDUMP=y
CONFIG_STM32H7_SDMMC1=y
CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32H7_SPI1=y
CONFIG_STM32H7_SPI2=y
CONFIG_STM32H7_SPI4=y
CONFIG_STM32H7_SPI5=y
CONFIG_STM32H7_SPI6=y
CONFIG_STM32H7_TIM1=y
CONFIG_STM32H7_TIM3=y
CONFIG_STM32H7_TIM4=y
CONFIG_STM32H7_UART4=y
CONFIG_STM32H7_UART7=y
CONFIG_STM32H7_UART8=y
CONFIG_STM32H7_USART1=y
CONFIG_STM32H7_USART2=y
CONFIG_STM32H7_USART3=y
CONFIG_STM32H7_USART6=y
CONFIG_STM32H7_USART_BREAKS=y
CONFIG_STM32H7_USART_INVERT=y
CONFIG_STM32H7_USART_SINGLEWIRE=y
CONFIG_STM32H7_USART_SWAP=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_TIME_EXTENDED=y
CONFIG_TTY_SIGINT=y
CONFIG_TTY_SIGSTP=y
CONFIG_UART4_BAUD=57600
CONFIG_UART4_DMA=y
CONFIG_UART4_RXBUFSIZE=600
CONFIG_UART4_TXBUFSIZE=1500
CONFIG_UART7_BAUD=57600
CONFIG_UART7_RXBUFSIZE=600
CONFIG_UART7_SERIAL_CONSOLE=y
CONFIG_UART7_TXBUFSIZE=1500
CONFIG_UART8_BAUD=57600
CONFIG_UART8_DMA=y
CONFIG_UART8_RXBUFSIZE=600
CONFIG_UART8_TXBUFSIZE=1500
CONFIG_USART1_BAUD=57600
CONFIG_USART1_DMA=y
CONFIG_USART1_RXBUFSIZE=600
CONFIG_USART1_TXBUFSIZE=1500
CONFIG_USART2_BAUD=57600
CONFIG_USART2_DMA=y
CONFIG_USART2_IFLOWCONTROL=y
CONFIG_USART2_OFLOWCONTROL=y
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_TXBUFSIZE=1500
CONFIG_USART3_BAUD=57600
CONFIG_USART3_DMA=y
CONFIG_USART3_IFLOWCONTROL=y
CONFIG_USART3_OFLOWCONTROL=y
CONFIG_USART3_RXBUFSIZE=600
CONFIG_USART3_TXBUFSIZE=3000
CONFIG_USART6_BAUD=57600
CONFIG_USART6_DMA=y
CONFIG_USART6_RXBUFSIZE=600
CONFIG_USART6_TXBUFSIZE=1500
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2624
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WATCHDOG=y