yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-22 01:12:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix for HobbyKing boards.

Browse Source
This commit is contained in:
James Goppert
2017-12-11 15:51:40 -05:00
committed by Lorenz Meier
parent a15ca72288
commit 75b93b0728
2 changed files with 4 additions and 23 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/drivers/boards/px4fmu-v2/board_config.h
View File

@@ -398,7 +398,7 @@
#define GPIO_VDD_BRICK_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
#define GPIO_VDD_SERVO_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN7)
#define GPIO_VDD_USB_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN0)
#define GPIO_VDD_3V3_SENSORS_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN3)
#define GPIO_VDD_3V3_SENSORS_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
#define GPIO_VDD_5V_HIPOWER_OC (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN10)
#define GPIO_VDD_5V_PERIPH_OC (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)

25
src/drivers/boards/px4fmu-v2/px4fmu_init.c
View File

@@ -324,10 +324,6 @@ stm32_boardinitialize(void)
/* configure LEDs */
board_autoled_initialize();
/* Start with the Sensor voltage off */
stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN);
/* configure ADC pins */
stm32_configgpio(GPIO_ADC1_IN2); /* BATT_VOLTAGE_SENS */
@@ -339,6 +335,7 @@ stm32_boardinitialize(void)
/* configure power supply control/sense pins */
stm32_configgpio(GPIO_VDD_5V_PERIPH_EN);
stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN);
stm32_configgpio(GPIO_VDD_BRICK_VALID);
stm32_configgpio(GPIO_VDD_SERVO_VALID);
stm32_configgpio(GPIO_VDD_USB_VALID);
@@ -346,9 +343,8 @@ stm32_boardinitialize(void)
stm32_configgpio(GPIO_VDD_5V_PERIPH_OC);
/* configure SPI interfaces is deferred to board_app_initialize
* to delay the sensor power up with out adding a delay
*/
/* configure SPI interfaces */
stm32_spiinitialize();
}
@@ -384,7 +380,6 @@ static struct sdio_dev_s *sdio;
__EXPORT int board_app_initialize(uintptr_t arg)
{
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
/* run C++ ctors before we go any further */
@@ -422,21 +417,7 @@ __EXPORT int board_app_initialize(uintptr_t arg)
#endif // BOARD_HAS_SIMPLE_HW_VERSIONING
/* Bring up the Sensor power */
stm32_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, 1);
/* Ensure the power is on 1 ms before we drive the GPIO pins */
usleep(1000);
/* Now it is ok to drive the pins high so configure SPI GPIO */
stm32_spiinitialize();
/* configure the high-resolution time/callout interface */
hrt_init();
param_init();