yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-21 01:12:11 +00:00
Code Issues Packages Projects Releases Wiki Activity

boards: MRO Control Zero F7 OEM Support

Browse Source
This commit is contained in:
Ryan Johnston
2021-02-13 10:16:55 -06:00
committed by GitHub
parent ce552a3364
commit 5a58f25d6a
18 changed files with 2068 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

126
boards/mro/ctrl-zero-f7-oem/default.cmake Normal file
View File

@@ -0,0 +1,126 @@
px4_add_board(
PLATFORM nuttx
VENDOR mro
MODEL ctrl-zero-f7-oem
LABEL default
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m7
ROMFSROOT px4fmu_common
TESTING
UAVCAN_INTERFACES 2
SERIAL_PORTS
TEL1:/dev/ttyS0
TEL2:/dev/ttyS1
GPS1:/dev/ttyS2
#RC:/dev/ttyS3
#CONSOLE:/dev/ttyS4
#FRSKY:/dev/ttyS5
DRIVERS
adc/board_adc
#barometer # all available barometer drivers
barometer/dps310
batt_smbus
camera_capture
camera_trigger
differential_pressure # all available differential pressure drivers
distance_sensor # all available distance sensor drivers
#dshot
gps
#heater
#imu # all available imu drivers
imu/bosch/bmi088
imu/invensense/icm20602
imu/invensense/icm20948
irlock
lights/blinkm
lights/rgbled
lights/rgbled_ncp5623c
magnetometer # all available magnetometer drivers
mkblctrl
#optical_flow # all available optical flow drivers
#osd
pca9685
power_monitor/ina226
#protocol_splitter
#pwm_input
pwm_out_sim
pwm_out
rc_input
roboclaw
safety_button
tap_esc
telemetry # all available telemetry drivers
test_ppm
tone_alarm
uavcan
MODULES
airspeed_selector
attitude_estimator_q
battery_status
camera_feedback
commander
dataman
ekf2
events
flight_mode_manager
fw_att_control
fw_pos_control_l1
land_detector
landing_target_estimator
load_mon
local_position_estimator
logger
mavlink
mc_att_control
mc_hover_thrust_estimator
mc_pos_control
mc_rate_control
#micrortps_bridge
navigator
rc_update
rover_pos_control
sensors
sih
temperature_compensation
vmount
vtol_att_control
SYSTEMCMDS
bl_update
dmesg
dumpfile
esc_calib
hardfault_log
i2cdetect
led_control
mft
mixer
motor_ramp
motor_test
mtd
nshterm
param
perf
pwm
reboot
reflect
sd_bench
system_time
tests # tests and test runner
top
topic_listener
tune_control
usb_connected
ver
work_queue
EXAMPLES
fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
hello
hwtest # Hardware test
#matlab_csv_serial
px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
rover_steering_control # Rover example app
uuv_example_app
work_item
)

13
boards/mro/ctrl-zero-f7-oem/firmware.prototype Normal file
View File

@@ -0,0 +1,13 @@
{
"board_id": 141,
"magic": "mRo-ctrl-zero-f7-oem",
"description": "Firmware for the mRo-ctrl-zero-f7-oem board",
"image": "",
"build_time": 0,
"summary": "mRo-ctrl-zero-f7-oem",
"version": "0.1",
"image_size": 0,
"image_maxsize": 2064384,
"git_identity": "",
"board_revision": 0
}

19
boards/mro/ctrl-zero-f7-oem/init/rc.board_defaults Normal file
View File

@@ -0,0 +1,19 @@
#!/bin/sh
#
# mRo Control Zero specific board defaults
#------------------------------------------------------------------------------
if [ $AUTOCNF = yes ]
then
# Multi-EKF
param set EKF2_MULTI_IMU 3
param set SENS_IMU_MODE 0
param set UAVCAN_ENABLE 2
fi
set LOGGER_BUF 64
set MIXER_AUX none
safety_button start

7
boards/mro/ctrl-zero-f7-oem/init/rc.board_mavlink Normal file
View File

@@ -0,0 +1,7 @@
#!/bin/sh
#
# mRo Control Zero specific board MAVLink startup script.
#------------------------------------------------------------------------------
# Start MAVLink on the USB port
mavlink start -d /dev/ttyACM0

19
boards/mro/ctrl-zero-f7-oem/init/rc.board_sensors Normal file
View File

@@ -0,0 +1,19 @@
#!/bin/sh
#
# mRo Control Zero specific board sensors init
#------------------------------------------------------------------------------
board_adc start
# Internal ICM-20602
icm20602 -s -b 1 -R 8 start
# Internal SPI bus BMI088 accel & gyro
bmi088 -A -s -b 5 -R 8 start
bmi088 -G -s -b 5 -R 8 start
# Internal ICM-20948 (with magnetometer)
icm20948 -s -b 1 -R 8 -M start
# Interal DPS310 (barometer)
dps310 -s -b 2 start

300
boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board.h Normal file
View File

@@ -0,0 +1,300 @@
/************************************************************************************
* board.h
*
* Copyright (C) 2016-2018 Gregory Nutt. All rights reserved.
* Authors: David Sidrane <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#pragma once
/************************************************************************************
* Included Files
************************************************************************************/
#include "board_dma_map.h"
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdmmc.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The mRo Control Zero F7 OEM board provides the following clock sources:
*
* 24 MHz crystal for HSE
*
* So we have these clock source available within the STM32
*
* HSI: 16 MHz RC factory-trimmed
* HSE: 24 MHz crystal for HSE
*/
#define STM32_BOARD_XTAL 24000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 0
/* Main PLL Configuration.
*
* PLL source is HSE = 24,000,000
*
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* Subject to:
*
* 2 <= PLLM <= 63
* 192 <= PLLN <= 432
* 192 MHz <= PLL_VCO <= 432MHz
*
* SYSCLK = PLL_VCO / PLLP
* Subject to
*
* PLLP = {2, 4, 6, 8}
* SYSCLK <= 216 MHz
*
* SDMMC and RNG Clock = PLL_VCO / PLLQ
* Subject to
* The SDMMC and the random number generator need a frequency lower than or equal
* to 48 MHz to work correctly.
*
* 2 <= PLLQ <= 15
*/
/* SDMMCCLK (= USB OTG FS clock = RNGCLK) should be <= 48MHz
*
* PLL_VCO = (16,000,000 / 24) * 432 = 432 MHz
* SYSCLK = 432 MHz / 2 = 216 MHz
* SDMMC and RNG Clock = 432 MHz / 9 = 48 MHz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(24)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(9)
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 24) * 432)
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 9)
/* Configure factors for PLLSAI clock */
#define CONFIG_STM32F7_PLLSAI 1
#define STM32_RCC_PLLSAICFGR_PLLSAIN RCC_PLLSAICFGR_PLLSAIN(192)
#define STM32_RCC_PLLSAICFGR_PLLSAIP RCC_PLLSAICFGR_PLLSAIP(8)
#define STM32_RCC_PLLSAICFGR_PLLSAIQ RCC_PLLSAICFGR_PLLSAIQ(4)
#define STM32_RCC_PLLSAICFGR_PLLSAIR RCC_PLLSAICFGR_PLLSAIR(2)
/* Configure Dedicated Clock Configuration Register */
#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ RCC_DCKCFGR1_PLLI2SDIVQ(1)
#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ RCC_DCKCFGR1_PLLSAIDIVQ(1)
#define STM32_RCC_DCKCFGR1_PLLSAIDIVR RCC_DCKCFGR1_PLLSAIDIVR(0)
#define STM32_RCC_DCKCFGR1_SAI1SRC RCC_DCKCFGR1_SAI1SEL(0)
#define STM32_RCC_DCKCFGR1_SAI2SRC RCC_DCKCFGR1_SAI2SEL(0)
#define STM32_RCC_DCKCFGR1_TIMPRESRC 0
#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0
#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0
/* Configure factors for PLLI2S clock */
#define CONFIG_STM32F7_PLLI2S 1
#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
#define STM32_RCC_PLLI2SCFGR_PLLI2SP RCC_PLLI2SCFGR_PLLI2SP(2)
#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
/* Configure Dedicated Clock Configuration Register 2 */
#define STM32_RCC_DCKCFGR2_USART1SRC RCC_DCKCFGR2_USART1SEL_APB
#define STM32_RCC_DCKCFGR2_USART2SRC RCC_DCKCFGR2_USART2SEL_APB
#define STM32_RCC_DCKCFGR2_UART4SRC RCC_DCKCFGR2_UART4SEL_APB
#define STM32_RCC_DCKCFGR2_UART5SRC RCC_DCKCFGR2_UART5SEL_APB
#define STM32_RCC_DCKCFGR2_USART6SRC RCC_DCKCFGR2_USART6SEL_APB
#define STM32_RCC_DCKCFGR2_UART7SRC RCC_DCKCFGR2_UART7SEL_APB
#define STM32_RCC_DCKCFGR2_UART8SRC RCC_DCKCFGR2_UART8SEL_APB
#define STM32_RCC_DCKCFGR2_I2C1SRC RCC_DCKCFGR2_I2C1SEL_HSI
#define STM32_RCC_DCKCFGR2_I2C2SRC RCC_DCKCFGR2_I2C2SEL_HSI
#define STM32_RCC_DCKCFGR2_I2C3SRC RCC_DCKCFGR2_I2C3SEL_HSI
#define STM32_RCC_DCKCFGR2_I2C4SRC RCC_DCKCFGR2_I2C4SEL_HSI
#define STM32_RCC_DCKCFGR2_LPTIM1SRC RCC_DCKCFGR2_LPTIM1SEL_APB
#define STM32_RCC_DCKCFGR2_CECSRC RCC_DCKCFGR2_CECSEL_HSI
#define STM32_RCC_DCKCFGR2_CK48MSRC RCC_DCKCFGR2_CK48MSEL_PLL
#define STM32_RCC_DCKCFGR2_SDMMCSRC RCC_DCKCFGR2_SDMMCSEL_48MHZ
#define STM32_RCC_DCKCFGR2_SDMMC2SRC RCC_DCKCFGR2_SDMMC2SEL_48MHZ
#define STM32_RCC_DCKCFGR2_DSISRC RCC_DCKCFGR2_DSISEL_PHY
/* Several prescalers allow the configuration of the two AHB buses, the
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
* the low-speed APB domain is 54 MHz.
*/
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* SDMMC dividers. Note that slower clocking is required when DMA is disabled
* in order to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode. These values have not been
* tuned!!!
*
* SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(118+2)=400 KHz
*/
/* Use the Falling edge of the SDIO_CLK clock to change the edge the
* data and commands are change on
*/
#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE
#define STM32_SDMMC_INIT_CLKDIV (118 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz
* DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_STM32F7_SDMMC_DMA
# define STM32_SDMMC_MMCXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_MMCXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz
* DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_STM32F7_SDMMC_DMA
# define STM32_SDMMC_SDXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#else
# define STM32_SDMMC_SDXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
#endif
/* FLASH wait states
*
* --------- ---------- -----------
* VDD MAX SYSCLK WAIT STATES
* --------- ---------- -----------
* 1.7-2.1 V 180 MHz 8
* 2.1-2.4 V 216 MHz 9
* 2.4-2.7 V 216 MHz 8
* 2.7-3.6 V 216 MHz 7
* --------- ---------- -----------
*/
#define BOARD_FLASH_WAITSTATES 7
/* UART/USART */
#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
#define GPIO_USART2_RTS GPIO_USART2_RTS_2 /* PD4 */
#define GPIO_USART2_CTS GPIO_USART2_CTS_2 /* PD3 */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */
#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */
#define GPIO_UART4_RX GPIO_UART4_RX_1 /* PA1 */
#define GPIO_UART4_TX GPIO_UART4_TX_1 /* PA0 */
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
#define GPIO_USART6_TX GPIO_USART6_TX_2 /* PG14 */
#define GPIO_UART7_RX GPIO_UART7_RX_1 /* PE7 */
#define GPIO_UART7_TX GPIO_UART7_TX_1 /* PE8 */
/* USART8: has no remap
*
* GPIO_UART8_RX PE0
* GPIO_UART8_TX PE1
*/
/* CAN */
#define GPIO_CAN1_RX GPIO_CAN1_RX_3 /* PD0 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_3 /* PD1 */
#define GPIO_CAN2_RX GPIO_CAN2_RX_1 /* PB12 */
#define GPIO_CAN2_TX GPIO_CAN2_TX_1 /* PB13 */
/* SPI */
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /* PA5 */
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /* PA7 */
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2 /* PB10 */
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 /* PB14 */
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 /* PB15 */
#define GPIO_SPI5_SCK GPIO_SPI5_SCK_1 /* PF7 */
#define GPIO_SPI5_MISO GPIO_SPI5_MISO_1 /* PF8 */
#define GPIO_SPI5_MOSI GPIO_SPI5_MOSI_1 /* PF9 */
/* I2C */
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */
#define GPIO_I2C3_SCL GPIO_I2C3_SCL_2 /* PH7 */
#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2 /* PH8 */
#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2 /* PF14 */
#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2 /* PF15 */

98
boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board_dma_map.h Normal file
View File

@@ -0,0 +1,98 @@
/****************************************************************************
*
* Copyright (c) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
/*
| DMA1 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
| Channel 0 | SPI3_RX_1 | SPDIFRX_DT | SPI3_RX_2 | SPI2_RX | SPI2_TX | SPI3_TX_1 | SPDIFRX_CS | SPI3_TX_2 |
| Channel 1 | I2C1_RX | I2C3_RX | TIM7_UP_1 | - | TIM7_UP_2 | I2C1_RX_1 | I2C1_TX | I2C1_TX_1 |
| Channel 2 | TIM4_CH1 | - | I2C4_RX | TIM4_CH2 | - | I2C4_RX | TIM4_UP | TIM4_CH3 |
| Channel 3 | - | TIM2_UP_1 | I2C3_RX_1 | - | I2C3_TX | TIM2_CH1 | TIM2_CH2 | TIM2_UP_2 |
| | | TIM2_CH3 | | | | | TIM2_CH4_1 | TIM2_CH4_2 |
| Channel 4 | UART5_RX | USART3_RX | UART4_RX | USART3_TX_1 | UART4_TX | USART2_RX | USART2_TX | UART5_TX |
| Channel 5 | UART8_TX | UART7_TX | TIM3_CH4 | UART7_RX | TIM3_CH1 | TIM3_CH2 | UART8_RX | TIM3_CH3 |
| | | | TIM3_UP | | TIM3_TRIG | | | |
| Channel 6 | TIM5_CH3 | TIM5_CH4_1 | TIM5_CH1 | TIM5_CH4_2 | TIM5_CH2 | - | TIM5_UP_2 | - |
| | TIM5_UP_1 | TIM5_TRIG_1 | | TIM5_TRIG_2 | | | | |
| Channel 7 | - | TIM6_UP | I2C2_RX | I2C2_RX_1 | USART3_TX_2 | DAC1 | DAC2 | I2C2_TX |
| Channel 8 | I2C3_TX | I2C4_RX | - | - | I2C2_TX | - | I2C4_TX | - |
| Channel 9 | - | SPI2_RX | - | - | - | - | SPI2_TX | - |
| | | | | | | | | |
| Usage | | USART3_RX | UART4_RX | USART3_TX_1 | | USART2_RX | | |
| DMA2 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 |
|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
| Channel 0 | ADC1_1 | SAI1_A | TIM8_CH1_1 | SAI1_A_1 | ADC1_2 | SAI1_B_1 | TIM1_CH1_1 | SAI2_B_2 |
| | | | TIM8_CH2_1 | | | | TIM1_CH2_1 | |
| | | | TIM8_CH3_1 | | | | TIM1_CH3_1 | |
| Channel 1 | - | DCMI_1 | ADC2_1 | ADC2_2 | SAI1_B | SPI6_TX | SPI6_RX | DCMI_2 |
| Channel 2 | ADC3_1 | ADC3_2 | - | SPI5_RX_1 | SPI5_TX_1 | CRYP_OUT | CRYP_IN | HASH_IN |
| Channel 3 | SPI1_RX_1 | - | SPI1_RX_2 | SPI1_TX_1 | SAI2_A | SPI1_TX_2 | SAI2_B | QUADSPI |
| Channel 4 | SPI4_RX_1 | SPI4_TX_1 | USART1_RX_1 | SDMMC1_1 | - | USART1_RX_2 | SDMMC1_2 | USART1_TX |
| Channel 5 | - | USART6_RX_1 | USART6_RX_2 | SPI4_RX_2 | SPI4_TX_2 | - | USART6_TX_1 | USART6_TX_2 |
| Channel 6 | TIM1_TRIG_1 | TIM1_CH1_2 | TIM1_CH2_2 | TIM1_CH1 | TIM1_CH4 | TIM1_UP | TIM1_CH3_2 | - |
| | | | | | TIM1_TRIG_2 | | | |
| | | | | | TIM1_COM | | | |
| Channel 7 | - | TIM8_UP | TIM8_CH1_2 | TIM8_CH2_2 | TIM8_CH3_2 | SPI5_RX_2 | SPI5_TX_2 | TIM8_CH4 |
| | | | | | | | | TIM8_TRIG |
| | | | | | | | | TIM8_COM |
| Channel 8 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 |
| Channel 9 | JPEG_IN | JPEG_OUT | SPI4_TX | JPEG_IN | JPEG_OUT | SPI5_RX | - | - |
| Channel 10 | SAI1_B | SAI2_B | SAI2_A | - | - | - | SAI1_A | - |
| Channel 11 | SDMMC2 | - | QUADSPI | - | - | SDMMC2 | - | - |
| | | | | | | | | |
| Usage | SPI1_RX_1 | USART6_RX_2 | | SPI1_TX_1 | SPI5_TX_1 | SPI5_RX_2 | SDMMC1_2 | |
*/
// DMA1 Channel/Stream Selections
//--------------------------------------------//---------------------------//----------------
// DMAMAP_USART3_RX // DMA1, Stream 1, Channel 4
// DMAMAP_UART4_RX // DMA1, Stream 2, Channel 4
#define DMAMAP_USART3_TX DMAMAP_USART3_TX_1 // DMA1, Stream 3, Channel 4
// AVAILABLE // DMA2, Stream 4
// DMAMAP_USART2_RX // DMA1, Stream 5, Channel 4
// DMA2 Channel/Stream Selections
//--------------------------------------------//---------------------------//----------------
#define DMAMAP_SPI1_RX DMAMAP_SPI1_RX_1 // DMA2, Stream 0, Channel 3 (SPI1 sensors RX)
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_1 // DMA2, Stream 1, Channel 5
// AVAILABLE // DMA2, Stream 2
#define DMAMAP_SPI1_TX DMAMAP_SPI1_TX_1 // DMA2, Stream 3, Channel 3 (SPI1 sensors TX)
#define DMAMAP_SPI5_TX DMAMAP_SPI5_TX_1 // DMA2, Stream 4, Channel 3 (SPI5 sensors TX)
#define DMAMAP_SPI5_RX DMAMAP_SPI5_RX_2 // DMA2, Stream 5, Channel 3 (SPI5 sensors RX)
#define DMAMAP_SDMMC1 DMAMAP_SDMMC1_2 // DMA2, Stream 6, Channel 4
// AVAILABLE // DMA2, Stream 7, Channel 5

237
boards/mro/ctrl-zero-f7-oem/nuttx-config/nsh/defconfig Normal file
View File

@@ -0,0 +1,237 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_ENVIRON is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_TIME is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32f7"
CONFIG_ARCH_CHIP_STM32F777II=y
CONFIG_ARCH_CHIP_STM32F7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_CRASHDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=22114
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_C99_BOOL8=y
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0x008D
CONFIG_CDCACM_PRODUCTSTR="mRoControlZeroF7"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x26ac
CONFIG_CDCACM_VENDORSTR="mRo"
CONFIG_CLOCK_MONOTONIC=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_DISABLE_MQUEUE=y
CONFIG_FAT_DMAMEMORY=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_LFN_ALIAS_HASH=y
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MAX_TASKS=64
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MMCSD=y
CONFIG_MMCSD_SDIO=y
CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
CONFIG_MM_REGIONS=3
CONFIG_MTD=y
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_RAMTRON=y
CONFIG_NAME_MAX=40
CONFIG_NFILE_DESCRIPTORS=12
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_DISABLE_IFCONFIG=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_DISABLE_MB=y
CONFIG_NSH_DISABLE_MH=y
CONFIG_NSH_DISABLE_TELNETD=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=15
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_PIPES=y
CONFIG_PREALLOC_TIMERS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAMTRON_SETSPEED=y
CONFIG_RAMTRON_WRITEWAIT=y
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1632
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SDMMC1_SDIO_MODE=y
CONFIG_SDMMC1_SDIO_PULLUP=y
CONFIG_SEM_NNESTPRIO=8
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_STM32F7_ADC1=y
CONFIG_STM32F7_BBSRAM=y
CONFIG_STM32F7_BBSRAM_FILES=5
CONFIG_STM32F7_BKPSRAM=y
CONFIG_STM32F7_DMA1=y
CONFIG_STM32F7_DMA2=y
CONFIG_STM32F7_DMACAPABLE=y
CONFIG_STM32F7_FLOWCONTROL_BROKEN=y
CONFIG_STM32F7_I2C1=y
CONFIG_STM32H7_I2C3=y
CONFIG_STM32H7_I2C4=y
CONFIG_STM32F7_I2C_DYNTIMEO=y
CONFIG_STM32F7_I2C_DYNTIMEO_STARTSTOP=10
CONFIG_STM32F7_OTGFS=y
CONFIG_STM32F7_PROGMEM=y
CONFIG_STM32F7_PWR=y
CONFIG_STM32F7_RTC=y
CONFIG_STM32F7_RTC_HSECLOCK=y
CONFIG_STM32F7_RTC_MAGIC_REG=1
CONFIG_STM32F7_SAVE_CRASHDUMP=y
CONFIG_STM32F7_SDMMC1=y
CONFIG_STM32F7_SDMMC_DMA=y
CONFIG_STM32F7_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32F7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32F7_SPI1=y
CONFIG_STM32F7_SPI1_DMA=y
CONFIG_STM32F7_SPI1_DMA_BUFFER=1024
CONFIG_STM32F7_SPI2=y
CONFIG_STM32F7_SPI5=y
CONFIG_STM32F7_SPI5_DMA=y
CONFIG_STM32F7_SPI5_DMA_BUFFER=1024
CONFIG_STM32F7_SPI_DMA=y
CONFIG_STM32F7_SPI_DMATHRESHOLD=8
CONFIG_STM32F7_TIM10=y
CONFIG_STM32F7_TIM11=y
CONFIG_STM32F7_TIM3=y
CONFIG_STM32F7_TIM9=y
CONFIG_STM32F7_UART4=y
CONFIG_STM32F7_UART7=y
CONFIG_STM32F7_UART8=y
CONFIG_STM32F7_USART2=y
CONFIG_STM32F7_USART3=y
CONFIG_STM32F7_USART6=y
CONFIG_STM32F7_USART_BREAKS=y
CONFIG_STM32F7_USART_INVERT=y
CONFIG_STM32F7_USART_SINGLEWIRE=y
CONFIG_STM32F7_USART_SWAP=y
CONFIG_STM32F7_WWDG=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_UART4_BAUD=57600
CONFIG_UART4_RXBUFSIZE=600
CONFIG_UART4_RXDMA=y
CONFIG_UART4_TXBUFSIZE=1500
CONFIG_UART7_BAUD=57600
CONFIG_UART7_RXBUFSIZE=600
CONFIG_UART7_SERIAL_CONSOLE=y
CONFIG_UART7_TXBUFSIZE=1500
CONFIG_UART8_BAUD=57600
CONFIG_UART8_RXBUFSIZE=600
CONFIG_UART8_TXBUFSIZE=1500
CONFIG_USART2_BAUD=57600
CONFIG_USART2_IFLOWCONTROL=y
CONFIG_USART2_OFLOWCONTROL=y
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_RXDMA=y
CONFIG_USART2_TXBUFSIZE=1500
CONFIG_USART3_BAUD=57600
CONFIG_USART3_IFLOWCONTROL=y
CONFIG_USART3_OFLOWCONTROL=y
CONFIG_USART3_RXBUFSIZE=600
CONFIG_USART3_RXDMA=y
CONFIG_USART3_TXBUFSIZE=3000
CONFIG_USART6_BAUD=57600
CONFIG_USART6_RXBUFSIZE=600
CONFIG_USART6_RXDMA=y
CONFIG_USART6_TXBUFSIZE=1500
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2944
CONFIG_USER_ENTRYPOINT="nsh_main"

181
boards/mro/ctrl-zero-f7-oem/nuttx-config/scripts/script.ld Normal file
View File

@@ -0,0 +1,181 @@
/****************************************************************************
* scripts/script.ld
*
* Copyright (C) 2019-2020 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F765IIT6 has 2048 KiB of main FLASH memory. This FLASH memory
* can be accessed from either the AXIM interface at address 0x0800:0000 or
* from the ITCM interface at address 0x0020:0000.
*
* Additional information, including the option bytes, is available at at
* FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
*
* In the STM32F765IIT6, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash on ITCM at 0x0020:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x0010:0000
*
* NuttX does not modify these option byes. On the unmodified NUCLEO-144
* board, the BOOT0 pin is at ground so by default, the STM32F765IIT6 will
* boot from address 0x0020:0000 in ITCM FLASH.
*
* The STM32F765IIT6 also has 512 KiB of data SRAM (in addition to ITCM SRAM).
* SRAM is split up into three blocks:
*
* 1) 128 KiB of DTCM SRM beginning at address 0x2000:0000
* 2) 368 KiB of SRAM1 beginning at address 0x2002:0000
* 3) 16 KiB of SRAM2 beginning at address 0x2007:c000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* Bootloader reserves three 32K banks (2 Mbytes Flash memory single bank)
* organization (256 bits read width)
*/
MEMORY
{
FLASH_ITCM (rx) : ORIGIN = 0x00218000, LENGTH = 1952K
FLASH_AXIM (rx) : ORIGIN = 0x08018000, LENGTH = 1952K /* start on 4th sector (1st sector for bootloader, 2 for extra storage) */
ITCM_RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 16K
DTCM_RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
SRAM1 (rwx) : ORIGIN = 0x20020000, LENGTH = 368K
SRAM2 (rwx) : ORIGIN = 0x2007c000, LENGTH = 16K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(32);
/*
This signature provides the bootloader with a way to delay booting
*/
_bootdelay_signature = ABSOLUTE(.);
FILL(0xffecc2925d7d05c5)
. += 8;
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > FLASH_AXIM
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > FLASH_AXIM
.ARM.extab : {
*(.ARM.extab*)
} > FLASH_AXIM
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > FLASH_AXIM
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > SRAM1 AT > FLASH_AXIM
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > SRAM1
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
.ramfunc : {
_sramfuncs = .;
*(.ramfunc .ramfunc.*)
. = ALIGN(4);
_eramfuncs = .;
} > ITCM_RAM AT > FLASH_AXIM
_framfuncs = LOADADDR(.ramfunc);
}

51
boards/mro/ctrl-zero-f7-oem/src/CMakeLists.txt Normal file
View File

@@ -0,0 +1,51 @@
############################################################################
#
# Copyright (c) 2019 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
add_library(drivers_board
init.c
i2c.cpp
led.c
sdio.c
spi.cpp
timer_config.cpp
usb.c
)
target_link_libraries(drivers_board
PRIVATE
arch_spi
drivers__led # drv_led_start
nuttx_arch # sdio
nuttx_drivers # sdio
px4_layer
)

241
boards/mro/ctrl-zero-f7-oem/src/board_config.h Normal file
View File

@@ -0,0 +1,241 @@
/****************************************************************************
*
* Copyright (c) 2019-2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* mro_ctrl-zero-f7 internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include <stm32_gpio.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* GPIOs ***********************************************************************************/
/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
#define GPIO_nLED_RED /* PB11 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
#define GPIO_nLED_GREEN /* PB1 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN1)
#define GPIO_nLED_BLUE /* PB3 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN3)
#define BOARD_HAS_CONTROL_STATUS_LEDS 1
#define BOARD_OVERLOAD_LED LED_RED
#define BOARD_ARMED_STATE_LED LED_BLUE
/*
* ADC channels
*
* These are the channel numbers of the ADCs of the microcontroller that
* can be used by the Px4 Firmware in the adc driver
*/
/* ADC defines to be used in sensors.cpp to read from a particular channel */
#define ADC1_CH(n) (n)
#define ADC1_GPIO(n) GPIO_ADC1_IN##n
/* Define GPIO pins used as ADC N.B. Channel numbers must match below */
#define PX4_ADC_GPIO \
/* PA2 */ ADC1_GPIO(2), \
/* PA3 */ ADC1_GPIO(3), \
/* PA4 */ ADC1_GPIO(4), \
/* PC1 */ ADC1_GPIO(11)
/* Define Channel numbers must match above GPIO pin IN(n)*/
#define ADC_BATTERY_VOLTAGE_CHANNEL /* PA2 */ ADC1_CH(2)
#define ADC_BATTERY_CURRENT_CHANNEL /* PA3 */ ADC1_CH(3)
#define ADC_SCALED_V5_CHANNEL /* PA4 */ ADC1_CH(4)
#define ADC_RC_RSSI_CHANNEL /* PC1 */ ADC1_CH(11)
#define ADC_CHANNELS \
((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
(1 << ADC_BATTERY_CURRENT_CHANNEL) | \
(1 << ADC_SCALED_V5_CHANNEL) | \
(1 << ADC_RC_RSSI_CHANNEL))
/* Define Battery 1 Voltage Divider and A per V */
#define BOARD_BATTERY1_V_DIV (18.1f) /* measured with the provided PM board */
#define BOARD_BATTERY1_A_PER_V (36.367515152f)
/* HW has to large of R termination on ADC todo:change when HW value is chosen */
#define BOARD_ADC_OPEN_CIRCUIT_V (5.6f)
/* CAN Silence: Silent mode control \ ESC Mux select */
#define GPIO_CAN1_SILENT_S0 /* PF5 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN5)
/* PWM */
#define DIRECT_PWM_OUTPUT_CHANNELS 8
#define DIRECT_INPUT_TIMER_CHANNELS 8
/* Power supply control and monitoring GPIOs */
#define GPIO_nPOWER_IN_A /* PB5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
#define GPIO_VDD_BRICK1_VALID GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
#define BOARD_NUMBER_BRICKS 1
#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN /* PE4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4)
/* Define True logic Power Control in arch agnostic form */
#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (!on_true))
#define READ_VDD_3V3_SPEKTRUM_POWER_EN() (px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN) == 0)
/* Tone alarm output */
#define TONE_ALARM_TIMER 2 /* timer 2 */
#define TONE_ALARM_CHANNEL 1 /* PA15 TIM2_CH1 */
#define GPIO_BUZZER_1 /* PA15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
#define GPIO_TONE_ALARM_IDLE GPIO_BUZZER_1
#define GPIO_TONE_ALARM GPIO_TIM2_CH1OUT_2
/* USB OTG FS */
#define GPIO_OTGFS_VBUS /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
/* High-resolution timer */
#define HRT_TIMER 3 /* use timer3 for the HRT */
#define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */
#define HRT_PPM_CHANNEL /* T3C3 */ 3 /* use capture/compare channel 3 */
#define GPIO_PPM_IN /* PB0 T3C3 */ GPIO_TIM3_CH3IN_1
/* RC Serial port */
#define RC_SERIAL_PORT "/dev/ttyS3"
#define GPIO_RSSI_IN /* PC1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN1)
/* Safety Switch: Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */
#define GPIO_SAFETY_SWITCH_IN /* PC4 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4)
/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */
#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */
/* Power switch controls ******************************************************/
#define SPEKTRUM_POWER(_on_true) VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
/*
* Board has a separate RC_IN
*
* GPIO PPM_IN on PB0 T3CH3
* SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
* Inversion is possible in the UART and can drive GPIO_PPM_IN as an output
*/
#define GPIO_PPM_IN_AS_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0)
#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
#define SPEKTRUM_RX_AS_UART() /* Can be left as uart */
#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
#define SDIO_SLOTNO 0 /* Only one slot */
#define SDIO_MINOR 0
/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
* this board support the ADC system_power interface, and therefore
* provides the true logic GPIO BOARD_ADC_xxxx macros.
*/
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
#define BOARD_ADC_USB_VALID BOARD_ADC_USB_CONNECTED
#define BOARD_ADC_SERVO_VALID (1) /* never powers off the Servo rail */
#define BOARD_ADC_BRICK_VALID (px4_arch_gpioread(GPIO_VDD_BRICK1_VALID))
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
/* This board provides a DMA pool and APIs */
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
/* This board provides the board_on_reset interface */
#define BOARD_HAS_ON_RESET 1
#define PX4_GPIO_INIT_LIST { \
PX4_ADC_GPIO, \
GPIO_CAN1_TX, \
GPIO_CAN1_RX, \
GPIO_CAN2_TX, \
GPIO_CAN2_RX, \
GPIO_CAN1_SILENT_S0, \
GPIO_nPOWER_IN_A, \
GPIO_VDD_3V3_SPEKTRUM_POWER_EN, \
GPIO_TONE_ALARM_IDLE, \
GPIO_SAFETY_SWITCH_IN, \
}
#define BOARD_ENABLE_CONSOLE_BUFFER
#define BOARD_NUM_IO_TIMERS 3
__BEGIN_DECLS
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************
* Name: stm32_sdio_initialize
*
* Description:
* Initialize SDIO-based MMC/SD card support
*
****************************************************************************/
int stm32_sdio_initialize(void);
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
*
****************************************************************************************************/
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS

40
boards/mro/ctrl-zero-f7-oem/src/i2c.cpp Normal file
View File

@@ -0,0 +1,40 @@
/****************************************************************************
*
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/i2c_hw_description.h>
constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
initI2CBusExternal(1),
initI2CBusInternal(3),
initI2CBusExternal(4),
};

250
boards/mro/ctrl-zero-f7-oem/src/init.c Normal file
View File

@@ -0,0 +1,250 @@
/****************************************************************************
*
* Copyright (c) 2019-2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file init.c
*
* Board-specific early startup code. This file implements the
* board_app_initializ() function that is called early by nsh during startup.
*
* Code here is run before the rcS script is invoked; it should start required
* subsystems and perform board-specific initialisation.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include "board_config.h"
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/config.h>
#include <nuttx/board.h>
#include <nuttx/spi/spi.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include <nuttx/analog/adc.h>
#include <nuttx/mm/gran.h>
#include <chip.h>
#include <stm32_uart.h>
#include <arch/board/board.h>
#include "arm_internal.h"
#include <px4_arch/io_timer.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_board_led.h>
#include <systemlib/px4_macros.h>
#include <px4_platform_common/init.h>
#include <px4_platform/gpio.h>
#include <px4_platform/board_dma_alloc.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/*
* Ideally we'd be able to get these from arm_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
__END_DECLS
/************************************************************************************
* Name: board_peripheral_reset
*
* Description:
*
************************************************************************************/
__EXPORT void board_peripheral_reset(int ms)
{
bool last = READ_VDD_3V3_SPEKTRUM_POWER_EN();
/* Keep Spektum on to discharge rail*/
VDD_3V3_SPEKTRUM_POWER_EN(false);
/* wait for the peripheral rail to reach GND */
usleep(ms * 1000);
syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
/* re-enable power */
/* switch the peripheral rail back on */
VDD_3V3_SPEKTRUM_POWER_EN(last);
}
/************************************************************************************
* Name: board_on_reset
*
* Description:
* Optionally provided function called on entry to board_system_reset
* It should perform any house keeping prior to the rest.
*
* status - 1 if resetting to boot loader
* 0 if just resetting
*
************************************************************************************/
__EXPORT void board_on_reset(int status)
{
for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
}
if (status >= 0) {
up_mdelay(6);
}
}
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void
stm32_boardinitialize(void)
{
board_on_reset(-1); /* Reset PWM first thing */
/* configure LEDs */
board_autoled_initialize();
/* configure pins */
const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
px4_gpio_init(gpio, arraySize(gpio));
board_control_spi_sensors_power_configgpio();
/* configure USB interfaces */
stm32_usbinitialize();
}
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
*
* Input Parameters:
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
* between the board-specific initialization logic and the the
* matching application logic. The value cold be such things as a
* mode enumeration value, a set of DIP switch switch settings, a
* pointer to configuration data read from a file or serial FLASH,
* or whatever you would like to do with it. Every implementation
* should accept zero/NULL as a default configuration.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
__EXPORT int board_app_initialize(uintptr_t arg)
{
/* Power on Interfaces */
board_control_spi_sensors_power(true, 0xffff);
VDD_3V3_SPEKTRUM_POWER_EN(true);
px4_platform_init();
stm32_spiinitialize();
/* configure the DMA allocator */
if (board_dma_alloc_init() < 0) {
syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
}
/* set up the serial DMA polling */
static struct hrt_call serial_dma_call;
/*
* Poll at 1ms intervals for received bytes that have not triggered
* a DMA event.
*/
struct timespec ts;
ts.tv_sec = 0;
ts.tv_nsec = 1000000;
hrt_call_every(&serial_dma_call,
ts_to_abstime(&ts),
ts_to_abstime(&ts),
(hrt_callout)stm32_serial_dma_poll,
NULL);
/* initial LED state */
drv_led_start();
led_off(LED_RED);
led_on(LED_GREEN); // Indicate Power.
led_off(LED_BLUE);
if (board_hardfault_init(2, true) != 0) {
led_on(LED_RED);
}
#ifdef CONFIG_MMCSD
int ret = stm32_sdio_initialize();
if (ret != OK) {
led_on(LED_RED);
return ret;
}
#endif /* CONFIG_MMCSD */
/* Configure the HW based on the manifest */
px4_platform_configure();
return OK;
}

103
boards/mro/ctrl-zero-f7-oem/src/led.c Normal file
View File

@@ -0,0 +1,103 @@
/****************************************************************************
*
* Copyright (c) 2019 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file led.c
*
* LED backend.
*/
#include <px4_platform_common/px4_config.h>
#include <stdbool.h>
#include "chip.h"
#include "stm32_gpio.h"
#include "board_config.h"
#include <nuttx/board.h>
#include <arch/board/board.h>
/*
* Ideally we'd be able to get these from arm_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
extern void led_toggle(int led);
__END_DECLS
static uint32_t g_ledmap[] = {
GPIO_nLED_BLUE, // Indexed by LED_BLUE
GPIO_nLED_RED, // Indexed by LED_RED
GPIO_nLED_GREEN, // Indexed by LED_GREEN
};
__EXPORT void led_init(void)
{
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
stm32_configgpio(g_ledmap[l]);
}
}
static void phy_set_led(int led, bool state)
{
/* Drive Low to switch on */
stm32_gpiowrite(g_ledmap[led], !state);
}
static bool phy_get_led(int led)
{
/* If Low it is on */
return !stm32_gpioread(g_ledmap[led]);
}
__EXPORT void led_on(int led)
{
phy_set_led(led, true);
}
__EXPORT void led_off(int led)
{
phy_set_led(led, false);
}
__EXPORT void led_toggle(int led)
{
phy_set_led(led, !phy_get_led(led));
}

171
boards/mro/ctrl-zero-f7-oem/src/sdio.c Normal file
View File

@@ -0,0 +1,171 @@
/****************************************************************************
*
* Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <board_config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include "chip.h"
#include "board_config.h"
#include "stm32_gpio.h"
#include "stm32_sdmmc.h"
#ifdef CONFIG_MMCSD
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Card detections requires card support and a card detection GPIO */
#define HAVE_NCD 1
#if !defined(GPIO_SDMMC1_NCD)
# undef HAVE_NCD
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static FAR struct sdio_dev_s *sdio_dev;
#ifdef HAVE_NCD
static bool g_sd_inserted = 0xff; /* Impossible value */
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_ncd_interrupt
*
* Description:
* Card detect interrupt handler.
*
****************************************************************************/
#ifdef HAVE_NCD
static int stm32_ncd_interrupt(int irq, FAR void *context)
{
bool present = !stm32_gpioread(GPIO_SDMMC1_NCD);
if (sdio_dev && present != g_sd_inserted) {
sdio_mediachange(sdio_dev, present);
g_sd_inserted = present;
}
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_sdio_initialize
*
* Description:
* Initialize SDIO-based MMC/SD card support
*
****************************************************************************/
int stm32_sdio_initialize(void)
{
int ret;
#ifdef HAVE_NCD
/* Card detect */
bool cd_status;
/* Configure the card detect GPIO */
stm32_configgpio(GPIO_SDMMC1_NCD);
/* Register an interrupt handler for the card detect pin */
stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
#endif
/* Mount the SDIO-based MMC/SD block driver */
/* First, get an instance of the SDIO interface */
finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
sdio_dev = sdio_initialize(SDIO_SLOTNO);
if (!sdio_dev) {
syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
if (ret != OK) {
syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
finfo("Successfully bound SDIO to the MMC/SD driver\n");
#ifdef HAVE_NCD
/* Use SD card detect pin to check if a card is g_sd_inserted */
cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
finfo("Card detect : %d\n", cd_status);
sdio_mediachange(sdio_dev, cd_status);
#else
/* Assume that the SD card is inserted. What choice do we have? */
sdio_mediachange(sdio_dev, true);
#endif
return OK;
}
#endif /* CONFIG_MMCSD */

53
boards/mro/ctrl-zero-f7-oem/src/spi.cpp Normal file
View File

@@ -0,0 +1,53 @@
/****************************************************************************
*
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/spi_hw_description.h>
#include <drivers/drv_sensor.h>
#include <nuttx/spi/spi.h>
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortC, GPIO::Pin2}, SPI::DRDY{GPIO::PortD, GPIO::Pin15}),
initSPIDevice(DRV_IMU_DEVTYPE_ICM20948, SPI::CS{GPIO::PortE, GPIO::Pin15}, SPI::DRDY{GPIO::PortE, GPIO::Pin12}),
}, {GPIO::PortE, GPIO::Pin3}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin10}),
initSPIDevice(DRV_BARO_DEVTYPE_DPS310, SPI::CS{GPIO::PortD, GPIO::Pin7}),
}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin10}, SPI::DRDY{GPIO::PortF, GPIO::Pin3}),
initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin6}, SPI::DRDY{GPIO::PortF, GPIO::Pin1}),
}),
};
static constexpr bool unused = validateSPIConfig(px4_spi_buses);

54
boards/mro/ctrl-zero-f7-oem/src/timer_config.cpp Normal file
View File

@@ -0,0 +1,54 @@
/****************************************************************************
*
* Copyright (C) 2019 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/io_timer_hw_description.h>
constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
initIOTimer(Timer::Timer1),
initIOTimer(Timer::Timer4),
initIOTimer(Timer::Timer8),
};
constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
initIOTimerChannel(io_timers, {Timer::Timer8, Timer::Channel1}, {GPIO::PortI, GPIO::Pin5}),
initIOTimerChannel(io_timers, {Timer::Timer8, Timer::Channel2}, {GPIO::PortI, GPIO::Pin6}),
};
constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
initIOTimerChannelMapping(io_timers, timer_io_channels);

105
boards/mro/ctrl-zero-f7-oem/src/usb.c Normal file
View File

@@ -0,0 +1,105 @@
/****************************************************************************
*
* Copyright (C) 2019 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file usb.c
*
* Board-specific USB functions.
*/
/************************************************************************************
* Included Files
************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include <arm_arch.h>
#include <chip.h>
#include <stm32_gpio.h>
#include <stm32_otg.h>
#include "board_config.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the board.
*
************************************************************************************/
__EXPORT void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32F7_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
uinfo("resume: %d\n", resume);
}