yemai/bizhang_-obav
1
0
Fork 0
mirror of https://gitee.com/xiaohuolufeihua/bizhang_-obav.git synced 2026-05-21 01:12:11 +00:00
Code Issues Packages Projects Releases Wiki Activity

Jenkins: HIL improve run_tests.py and run_nsh_cmd.py helper

Browse Source 
- switch to python3
 - run_nsh_cmd.py return error if command fails
 - decrease timeout in checking for output
 - Jenkins hardware tests tolerate certain command failures that aren't available on all boards (flash constrained, etc)
This commit is contained in:
Daniel Agar
2020-11-10 22:45:50 -05:00
committed by GitHub
parent ea09d9ebbf
commit 3924792c20
4 changed files with 159 additions and 178 deletions
Download Patch File Download Diff File Expand all files Collapse all files

178
.ci/Jenkinsfile-hardware
View File

@@ -43,23 +43,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v2_test'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v2_test/px4_fmu-v2_test.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
steps {
// configure
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 0"' // no airframe
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin"' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
}
}
stage("status") {
steps {
statusFTDI()
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v2_test/px4_fmu-v2_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("reset") {
@@ -111,8 +95,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v3_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -121,8 +104,8 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin"' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -185,8 +168,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v4_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -195,7 +177,7 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic multicopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -258,8 +240,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v4pro_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -268,8 +249,8 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin"' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -332,8 +313,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v5_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -343,8 +323,8 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin"' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -407,19 +387,18 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v5_debug'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
steps {
// configure
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic multicopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic multicopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin"' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -482,8 +461,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v5_optimized'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_optimized/px4_fmu-v5_optimized.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_optimized/px4_fmu-v5_optimized.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -492,7 +470,7 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -555,8 +533,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'px4_fmu-v5_stackcheck'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -567,7 +544,7 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set MAV_0_CONFIG 0"' // limit cpu usage
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic multicopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -630,17 +607,16 @@ pipeline {
sh 'find /dev/serial'
unstash 'modalai_fc-v1_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_default/modalai_fc-v1_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-SEGGER_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_default/modalai_fc-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-SEGGER_*` --baudrate 57600'
}
}
stage("configure") {
steps {
// configure
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set SYS_AUTOSTART 4001"' // generic vtol standardulticopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set SYS_AUTOSTART 4001"' // generic vtol standardulticopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -703,22 +679,21 @@ pipeline {
sh 'find /dev/serial'
unstash 'holybro_durandal-v1_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_default/holybro_durandal-v1_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_default/holybro_durandal-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
steps {
// configure
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set DSHOT_CONFIG 600"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set IMU_GYRO_RATEMAX 4000"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_BL_UPDATE 1"' // update bootloader
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_USE_IO 0"' // for dshot
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_BL_UPDATE 1"' // update bootloader
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_USE_IO 0"' // for dshot
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin"' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -782,8 +757,7 @@ pipeline {
sh 'find /dev/serial'
unstash 'nxp_fmuk66-v3_default'
// flash board and watch bootup
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_default/nxp_fmuk66-v3_default.elf'
sh './Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_default/nxp_fmuk66-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-FTDI_*` --baudrate 57600'
}
}
stage("configure") {
@@ -792,7 +766,7 @@ pipeline {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"' // disable buzzer
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic multicopter
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param save"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"' // reboot to apply
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true' // reboot to apply
}
}
stage("status") {
@@ -839,15 +813,15 @@ void statusFTDI() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "work_queue status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "board_adc test"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander check"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander check" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate accel quick; sleep 2; param show CAL_ACC*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate gyro; sleep 2; param show CAL_GYRO*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate level; sleep 2; param show SENS_BOARD*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate mag quick; sleep 2; param show CAL_MAG*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate accel quick; sleep 2; param show CAL_ACC*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate gyro; sleep 2; param show CAL_GYRO*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate level; sleep 2; param show SENS_BOARD*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander calibrate mag quick; sleep 2; param show CAL_MAG*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman status" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "df"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dmesg" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "gps status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "listener adc_report"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "listener battery_status"'
@@ -893,11 +867,11 @@ void statusFTDI() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "perf latency"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "perf"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ps"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "pwm info -d /dev/pwm_output0"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "pwm info -d /dev/pwm_output1"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "pwm_out status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "sd_bench -r 2"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "pwm info -d /dev/pwm_output0" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "pwm info -d /dev/pwm_output1" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "pwm_out status" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "px4io status" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "sd_bench -r 2" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "sensors status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "listener cpuload; top once; listener cpuload"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "uorb status"'
@@ -907,7 +881,7 @@ void statusFTDI() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "ekf2 status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "free"'
// stop logger
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "logger off"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "logger off" || true' // allow failure for now
}
void statusSEGGER() {
@@ -917,15 +891,15 @@ void statusSEGGER() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "free"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "work_queue status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "board_adc test"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander check"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander check" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate accel quick; sleep 2; param show CAL_ACC*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate gyro; sleep 2; param show CAL_GYRO*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate level; sleep 2; param show SENS_BOARD*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate mag quick; sleep 2; param show CAL_MAG*"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "dataman status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate accel quick; sleep 2; param show CAL_ACC*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate gyro; sleep 2; param show CAL_GYRO*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate level; sleep 2; param show SENS_BOARD*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander calibrate mag quick; sleep 2; param show CAL_MAG*" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "dataman status" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "df -h"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "dmesg"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "dmesg" || true' // allow failure, not available everywhere
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "gps status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "listener adc_report"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "listener battery_status"'
@@ -971,11 +945,11 @@ void statusSEGGER() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "perf latency"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "perf"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "ps"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "pwm info -d /dev/pwm_output0"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "pwm info -d /dev/pwm_output1"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "pwm_out status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "px4io status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "sd_bench -r 2"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "pwm info -d /dev/pwm_output0" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "pwm info -d /dev/pwm_output1" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "pwm_out status" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "px4io status" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "sd_bench -r 2" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "sensors status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "listener cpuload; top once; listener cpuload"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "uorb status"'
@@ -985,22 +959,23 @@ void statusSEGGER() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "ekf2 status"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "free"'
// stop logger
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "logger off"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "logger off" || true' // allow failure for now
}
void cleanupFTDI() {
// wipe sdcard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "commander stop"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "mavlink stop-all"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "navigator stop"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman stop"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "logger off"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "umount /fs/microsd"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "mkfatfs /dev/mmcsd0"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "dataman stop" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "logger off" || true' // allow failure for now
// wipe sdcard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "umount /fs/microsd" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "mkfatfs /dev/mmcsd0" || true' // allow failure for now
// drop any uncommited hardfaults
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "hardfault_log rearm"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "hardfault_log reset"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "hardfault_log rearm" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "hardfault_log reset" || true' // allow failure for now
// erase mtd
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "mtd readtest"'
@@ -1015,22 +990,23 @@ void cleanupFTDI() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param status"'
// reboot
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot" || true'
}
void cleanupSEGGER() {
// wipe sdcard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "commander stop"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "mavlink stop-all"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "navigator stop"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "dataman stop"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "logger off"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "umount /fs/microsd"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "mkfatfs /dev/mmcsd0"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "dataman stop" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "logger off" || true' // allow failure for now
// wipe sdcard
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "umount /fs/microsd" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "mkfatfs /dev/mmcsd0" || true' // allow failure for now
// drop any uncommited hardfaults
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "hardfault_log rearm"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "hardfault_log reset"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "hardfault_log rearm" || true' // allow failure for now
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "hardfault_log reset" || true' // allow failure for now
// erase mtd
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "mtd readtest"'
@@ -1045,5 +1021,5 @@ void cleanupSEGGER() {
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param status"'
// reboot
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "reboot"'
sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "reboot" || true'
}

18
Tools/HIL/monitor_firmware_upload.py
View File

@@ -1,4 +1,4 @@
#! /usr/bin/python
#! /usr/bin/env python3
import serial, time
import subprocess
@@ -10,7 +10,7 @@ def monitor_firmware_upload(port, baudrate):
databits = serial.EIGHTBITS
stopbits = serial.STOPBITS_ONE
parity = serial.PARITY_NONE
ser = serial.Serial(port, baudrate, databits, parity, stopbits, timeout=10)
ser = serial.Serial(port, baudrate, databits, parity, stopbits, timeout=1)
finished = 0
@@ -19,8 +19,9 @@ def monitor_firmware_upload(port, baudrate):
timeout_newline = time.time()
while finished == 0:
serial_line = ser.readline()
print(serial_line.replace('\n',''))
serial_line = ser.readline().decode("utf-8", errors='ignore')
if (len(serial_line) > 0):
print(serial_line.replace('\n', ''))
if "NuttShell (NSH)" in serial_line:
finished = 1
@@ -36,16 +37,17 @@ def monitor_firmware_upload(port, baudrate):
finished = 1
break
# newline every 30 seconds if still running
if time.time() - timeout_newline > 30:
ser.write('\n')
# newline every 10 seconds if still running
if time.time() - timeout_newline > 10:
timeout_newline = time.time()
ser.write('\n'.encode("utf-8"))
ser.flush()
ser.close()
def main():
parser = ArgumentParser(description=__doc__)
parser.add_argument('--device', "-d", nargs='?', default = None, help='')
parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
args = parser.parse_args()

82
Tools/HIL/run_nsh_cmd.py
View File

@@ -1,72 +1,74 @@
#! /usr/bin/python
#! /usr/bin/env python3
import serial, time
import subprocess
from subprocess import call, Popen
from argparse import ArgumentParser
import re
import sys
def do_nsh_cmd(port, baudrate, cmd):
databits = serial.EIGHTBITS
stopbits = serial.STOPBITS_ONE
parity = serial.PARITY_NONE
ser = serial.Serial(port, baudrate, databits, parity, stopbits, timeout=10)
ser.write('\n')
finished = 0
success = False
timeout = 10 # 10 seconds
timeout_start = time.time()
while True:
serial_line = ser.readline()
print(serial_line.replace('\n',''))
if "nsh>" in serial_line:
break
elif "NuttShell (NSH)" in serial_line:
break
if time.time() > timeout_start + timeout:
print("Error, timeout")
break
ser.write('\n')
time.sleep(0.01)
ser = serial.Serial(port, baudrate, databits, parity, stopbits, timeout=0.1)
# run command
ser.write(cmd + '\n')
timeout = 30 # 30 seconds
timeout_start = time.time()
timeout_newline = timeout_start
timeout = 10 # 10 seconds
success_cmd = "cmd succeeded!"
while True:
serial_line = ser.readline()
print(serial_line.replace('\n',''))
serial_cmd = '{0}; echo "{1}"\n'.format(cmd, success_cmd)
ser.write(serial_cmd.encode("utf-8"))
ser.flush()
serial_line = ser.readline().decode("utf-8", errors='ignore')
if cmd in serial_line:
continue
elif "nsh>" in serial_line:
break
elif "NuttShell (NSH)" in serial_line:
break
else:
print(serial_line.replace('\n', ''))
if time.time() > timeout_start + timeout:
print("Error, timeout")
sys.exit(-1)
break
ser.write('\n')
time.sleep(0.01)
time.sleep(1)
timeout_start = time.time()
timeout = 30 # 30 seconds
while True:
serial_line = ser.readline().decode("utf-8", errors='ignore')
if success_cmd in serial_line:
break
else:
if len(serial_line) > 0:
print(serial_line.replace('\n', ''))
if "nsh>" in serial_line:
sys.exit(-1) # error, command didn't complete successfully
elif "NuttShell (NSH)" in serial_line:
sys.exit(-1) # error, command didn't complete successfully
if len(serial_line) <= 0:
ser.write("\n".encode("utf-8"))
ser.flush()
if time.time() > timeout_start + timeout:
print("Error, timeout")
sys.exit(-1)
ser.close()
def main():
parser = ArgumentParser(description=__doc__)
parser.add_argument('--device', "-d", nargs='?', default = None, help='')
parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
parser.add_argument("--cmd", "-c", dest="cmd", help="Command to run")
args = parser.parse_args()

59
Tools/HIL/run_tests.py
View File

@@ -1,4 +1,4 @@
#! /usr/bin/python
#! /usr/bin/env python3
import serial, time
import subprocess
@@ -7,52 +7,53 @@ from argparse import ArgumentParser
import re
import unittest
import os
import sys
def do_test(port, baudrate, test_name):
databits = serial.EIGHTBITS
stopbits = serial.STOPBITS_ONE
parity = serial.PARITY_NONE
ser = serial.Serial(port, baudrate, databits, parity, stopbits, timeout=10)
ser.write('\n')
ser = serial.Serial(port, baudrate, databits, parity, stopbits, timeout=1)
success = False
timeout = 10 # 10 seconds
# run test cmd
print('\n|======================================================================')
cmd = 'tests ' + test_name
print("| Running:", cmd)
print('|======================================================================')
timeout_start = time.time()
timeout = 10 # 10 seconds
while True:
serial_line = ser.readline()
print(serial_line.replace('\n',''))
serial_cmd = '{0}\n'.format(cmd)
ser.write(serial_cmd.encode("utf-8"))
ser.flush()
if "nsh>" in serial_line:
break
elif "NuttShell (NSH)" in serial_line:
serial_line = ser.readline().decode("utf-8", errors='ignore')
if cmd in serial_line:
break
else:
print(serial_line.replace('\n', ''))
if time.time() > timeout_start + timeout:
print("Error, timeout")
break
print("Error, unable to write cmd")
return False
ser.write('\n')
time.sleep(0.01)
time.sleep(1)
# run test cmd
cmd = 'tests ' + test_name
ser.write(cmd + '\n')
# print results, wait for final result (PASSED or FAILED)
timeout = 180 # 3 minutes
timeout_start = time.time()
timeout_newline = timeout_start
while True:
serial_line = ser.readline()
print(serial_line.replace('\n',''))
serial_line = ser.readline().decode("utf-8", errors='ignore')
if (len(serial_line) > 0):
print(serial_line.replace('\n', ''))
if cmd in serial_line:
continue
elif test_name + " PASSED" in serial_line:
if test_name + " PASSED" in serial_line:
success = True
break
elif test_name + " FAILED" in serial_line:
@@ -65,9 +66,9 @@ def do_test(port, baudrate, test_name):
success = False
break
# newline every 30 seconds if still running
if time.time() - timeout_newline > 30:
ser.write('\n')
# newline every 10 seconds if still running
if time.time() - timeout_newline > 10:
ser.write("\n".encode("utf-8"))
timeout_newline = time.time()
ser.close()
@@ -170,14 +171,14 @@ class TestHardwareMethods(unittest.TestCase):
def main():
parser = ArgumentParser(description=__doc__)
parser.add_argument('--device', "-d", nargs='?', default = None, help='')
parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
args = parser.parse_args()
TestHardwareMethods.TEST_DEVICE = args.device
TestHardwareMethods.TEST_BAUDRATE = args.baudrate
unittest.main(__name__, argv=['main'])
unittest.main(__name__, failfast=True, verbosity=0, argv=['main'])
if __name__ == "__main__":
main()