Add tap-v1 config

cmake/configs/nuttx_tap-v1_default.cmake

@@ -0,0 +1,125 @@
+include(nuttx/px4_impl_nuttx)
+
+set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/cmake/toolchains/Toolchain-arm-none-eabi.cmake)
+
+set(config_module_list
+	#
+	# Board support modules
+	#
+	drivers/device
+	drivers/stm32
+	drivers/stm32/adc
+	drivers/stm32/tone_alarm
+	drivers/led
+	drivers/px4fmu
+	drivers/boards/tap-v1
+	drivers/rgbled_pwm
+	#drivers/mpu6500
+	drivers/ms5611
+	drivers/gps
+	drivers/airspeed
+	drivers/meas_airspeed
+	modules/sensors
+	drivers/camera_trigger
+
+	#
+	# System commands
+	#
+	systemcmds/bl_update
+	systemcmds/mixer
+	systemcmds/param
+	systemcmds/perf
+	systemcmds/pwm
+	systemcmds/reboot
+	systemcmds/top
+	systemcmds/config
+	systemcmds/nshterm
+	systemcmds/mtd
+	systemcmds/dumpfile
+	systemcmds/ver
+
+	#
+	# General system control
+	#
+	modules/commander
+	modules/load_mon
+	modules/navigator
+	modules/mavlink
+	modules/land_detector
+
+	#
+	# Estimation modules (EKF/ SO3 / other filters)
+	#
+	modules/ekf2
+
+	#
+	# Vehicle Control
+	#
+	modules/fw_pos_control_l1
+	modules/fw_att_control
+	modules/mc_att_control
+	modules/mc_pos_control
+	modules/vtol_att_control
+
+	#
+	# Logging
+	#
+	modules/logger
+
+	#
+	# Library modules
+	#
+	modules/param
+	modules/systemlib
+	modules/systemlib/mixer
+	modules/uORB
+	modules/dataman
+
+	#
+	# Libraries
+	#
+	lib/controllib
+	lib/mathlib
+	lib/mathlib/math/filter
+	lib/ecl
+	lib/external_lgpl
+	lib/geo
+	lib/geo_lookup
+	lib/conversion
+	lib/launchdetection
+	lib/terrain_estimation
+	lib/runway_takeoff
+	lib/tailsitter_recovery
+	lib/DriverFramework/framework
+	platforms/nuttx
+
+	# had to add for cmake, not sure why wasn't in original config
+	platforms/common
+	platforms/nuttx/px4_layer
+)
+
+set(config_extra_builtin_cmds
+	serdis
+	sercon
+	)
+
+set(config_io_board
+	)
+
+set(config_extra_libs
+	)
+
+set(config_io_extra_libs
+	)
+
+add_custom_target(sercon)
+set_target_properties(sercon PROPERTIES
+	PRIORITY "SCHED_PRIORITY_DEFAULT"
+	MAIN "sercon"
+	STACK_MAIN "2048")
+
+add_custom_target(serdis)
+set_target_properties(serdis PROPERTIES
+	PRIORITY "SCHED_PRIORITY_DEFAULT"
+	MAIN "serdis"
+	STACK_MAIN "2048")

cmake/nuttx/px4_impl_nuttx.cmake

@@ -450,55 +450,8 @@ function(px4_os_add_flags)
 	endif()
 
 	set(cpu_flags)
-	if (${BOARD} STREQUAL "px4fmu-v1")
-		set(cpu_flags
-			-mcpu=cortex-m4
-			-mthumb
-			-march=armv7e-m
-			-mfpu=fpv4-sp-d16
-			-mfloat-abi=hard
-			)
-	elseif (${BOARD} STREQUAL "px4fmu-v2")
-		set(cpu_flags
-			-mcpu=cortex-m4
-			-mthumb
-			-march=armv7e-m
-			-mfpu=fpv4-sp-d16
-			-mfloat-abi=hard
-			)
-	elseif (${BOARD} STREQUAL "px4fmu-v4")
-		set(cpu_flags
-			-mcpu=cortex-m4
-			-mthumb
-			-march=armv7e-m
-			-mfpu=fpv4-sp-d16
-			-mfloat-abi=hard
-			)
-	elseif (${BOARD} STREQUAL "px4-stm32f4discovery")
-		set(cpu_flags
-			-mcpu=cortex-m4
-			-mthumb
-			-march=armv7e-m
-			-mfpu=fpv4-sp-d16
-			-mfloat-abi=hard
-			)
-	elseif (${BOARD} STREQUAL "aerocore")
-		set(cpu_flags
-			-mcpu=cortex-m4
-			-mthumb
-			-march=armv7e-m
-			-mfpu=fpv4-sp-d16
-			-mfloat-abi=hard
-			)
-	elseif (${BOARD} STREQUAL "mindpx-v2")
-			set(cpu_flags
-			-mcpu=cortex-m4
-			-mthumb
-			-march=armv7e-m
-			-mfpu=fpv4-sp-d16
-			-mfloat-abi=hard
-			)
-	elseif (${BOARD} STREQUAL "px4io-v1")
+	# Handle non-F4 boards specifically here
+	if (${BOARD} STREQUAL "px4io-v1")
 		set(cpu_flags
 			-mcpu=cortex-m3
 			-mthumb
@@ -510,6 +463,14 @@ function(px4_os_add_flags)
 			-mthumb
 			-march=armv7-m
 			)
+	else ()
+			set(cpu_flags
+			-mcpu=cortex-m4
+			-mthumb
+			-march=armv7e-m
+			-mfpu=fpv4-sp-d16
+			-mfloat-abi=hard
+			)
 	endif()
 	list(APPEND c_flags ${cpu_flags})
 	list(APPEND cxx_flags ${cpu_flags})