POSIX SITL configs: Update default parameters to improve simulation behaviour

The main changes include:
 * Better attitude tuning for airframes (more realistic models, the models had previously not as much thrust as the real vehicles)
 * Better waypoint and navigation default parameters which match the on-hardware parameters
 * More suitable minimum and trim airspeeds for VTOL and fixed wing which prevents stalls that happened in SITL previously (the new airspeeds match the real vehicles nicely)

posix-configs/SITL/init/ekf2/standard_vtol

@@ -35,13 +35,19 @@ param set MPC_XY_FF 0.1
 param set MPC_Z_VEL_MAX 1.5
 param set MPC_Z_VEL_P 0.6
 param set MPC_Z_VEL_I 0.15
+param set FW_AIRSPD_MIN 14
+param set FW_AIRSPD_TRIM 16
+param set FW_AIRSPD_MAX 25
 param set SENS_BOARD_ROT 0
 param set SENS_DPRES_OFF 0.001
 param set SENS_BOARD_X_OFF 0.000001
 param set COM_RC_IN_MODE 1
 param set NAV_DLL_ACT 2
-param set NAV_ACC_RAD 3.0
+param set NAV_ACC_RAD 5.0
+param set NAV_LOITER_RAD 80
 param set MPC_TKO_SPEED 1.0
+param set MIS_LTRMIN_ALT 10
+param set MIS_TAKEOFF_ALT 10
 param set MIS_YAW_TMT 10
 param set RTL_RETURN_ALT 30.0
 param set RTL_DESCEND_ALT 10.0
@@ -52,7 +58,7 @@ param set EKF2_GBIAS_INIT 0.01
 param set EKF2_ANGERR_INIT 0.01
 param set EKF2_MAG_TYPE 1
 replay tryapplyparams
-simulator start -s 
+simulator start -s
 rgbledsim start
 tone_alarm start
 gyrosim start
@@ -76,6 +82,7 @@ fw_att_control start
 mixer load /dev/pwm_output0 ROMFS/sitl/mixers/standard_vtol_sitl.main.mix
 mavlink start -u 14556 -r 2000000
 mavlink start -u 14557 -r 2000000 -m onboard -o 14540
+mavlink stream -r 20 -s EXTENDED_SYS_STATE -u 14540
 mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
 mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
 mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556