boards/px4/fmu-v2/test.cmake


px4_add_board(
	PLATFORM nuttx
	VENDOR px4
	MODEL fmu-v2
	LABEL test
	TOOLCHAIN arm-none-eabi
	ARCHITECTURE cortex-m4
	ROMFSROOT px4fmu_test
	IO px4_io-v2_default
	TESTING
	#UAVCAN_INTERFACES 2
	CONSTRAINED_FLASH

	SERIAL_PORTS
		GPS1:/dev/ttyS0
		TEL1:/dev/ttyS1
		TEL2:/dev/ttyS2
		TEL4:/dev/ttyS3

	DRIVERS
		adc
		#barometer # all available barometer drivers
		barometer/ms5611
		#batt_smbus
		camera_trigger
		#differential_pressure # all available differential pressure drivers
		differential_pressure/ms4525
		#distance_sensor # all available distance sensor drivers
		distance_sensor/ll40ls
		distance_sensor/sf0x
		gps
		#heater
		#imu/adis16448
		#imu # all available imu drivers
		imu/l3gd20
		imu/lsm303d
		imu/mpu6000
		#imu/mpu9250
		#iridiumsbd
		#irlock
		#lights/blinkm
		lights/rgbled
		#magnetometer # all available magnetometer drivers
		magnetometer/hmc5883
		#mkblctrl
		#optical_flow # all available optical flow drivers
		optical_flow/px4flow
		#pca9685
		#protocol_splitter
		#pwm_input
		#pwm_out_sim
		px4fmu
		px4io
		#tap_esc
		#telemetry # all available telemetry drivers
		#test_ppm
		tone_alarm
		#uavcan

	MODULES
		#attitude_estimator_q
		# camera_feedback
		commander
		dataman
		#ekf2
		events
		#fw_att_control
		#fw_pos_control_l1
		#rover_pos_control
		# land_detector
		# landing_target_estimator
		load_mon
		#local_position_estimator
		logger
		mavlink
		mc_att_control
		mc_rate_control
		mc_pos_control
		navigator
		battery_status
		sensors
		vmount
		# vtol_att_control
		#airspeed_selector

	SYSTEMCMDS
		#bl_update
		#config
		#dumpfile
		#esc_calib
		hardfault_log
		i2cdetect
		#led_control
		mixer
		#motor_ramp
		motor_test
		mtd
		#nshterm
		param
		perf
		pwm
		reboot
		sd_bench
		tests # tests and test runner
		top
		#topic_listener
		tune_control
		ver
		work_queue

	EXAMPLES
		#bottle_drop # OBC challenge
		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
		#hello
		#hwtest # Hardware test
		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
		#rover_steering_control # Rover example app
	)
boards organization 2018-11-16 12:52:37 -05:00
			`px4_add_board(`
			`PLATFORM nuttx`
			`VENDOR px4`
			`MODEL fmu-v2`
			`LABEL test`
cmake remove need for platform px4_add_board_os - explicitly set TOOLCHAIN on all NuttX targets 2018-11-23 10:01:03 -05:00			`TOOLCHAIN arm-none-eabi`
cmake use standard mechanisms for settings flags 2018-11-23 12:39:44 -05:00			`ARCHITECTURE cortex-m4`
boards organization 2018-11-16 12:52:37 -05:00			`ROMFSROOT px4fmu_test`
boards new split VENDOR_MODEL naming convention 2018-11-21 23:27:21 -05:00			`IO px4_io-v2_default`
boards organization 2018-11-16 12:52:37 -05:00			`TESTING`
			`#UAVCAN_INTERFACES 2`
fmu-v2: set CONSTRAINED_FLASH on all targets 2019-10-26 16:01:09 +02:00			`CONSTRAINED_FLASH`
boards organization 2018-11-16 12:52:37 -05:00
			`SERIAL_PORTS`
			`GPS1:/dev/ttyS0`
			`TEL1:/dev/ttyS1`
			`TEL2:/dev/ttyS2`
			`TEL4:/dev/ttyS3`

			`DRIVERS`
adc: refactor into arch-specific directories 2019-08-26 14:21:49 +02:00			`adc`
boards organization 2018-11-16 12:52:37 -05:00			`#barometer # all available barometer drivers`
			`barometer/ms5611`
			`#batt_smbus`
			`camera_trigger`
			`#differential_pressure # all available differential pressure drivers`
			`differential_pressure/ms4525`
			`#distance_sensor # all available distance sensor drivers`
			`distance_sensor/ll40ls`
			`distance_sensor/sf0x`
			`gps`
			`#heater`
			`#imu/adis16448`
drivers create lights category (directory) 2018-12-01 13:53:54 -05:00			`#imu # all available imu drivers`
boards organization 2018-11-16 12:52:37 -05:00			`imu/l3gd20`
			`imu/lsm303d`
			`imu/mpu6000`
px4_fmu-v2 variants disable mpu9250 2019-09-02 12:26:41 -04:00			`#imu/mpu9250`
boards organization 2018-11-16 12:52:37 -05:00			`#iridiumsbd`
			`#irlock`
drivers create lights category (directory) 2018-12-01 13:53:54 -05:00			`#lights/blinkm`
			`lights/rgbled`
boards organization 2018-11-16 12:52:37 -05:00			`#magnetometer # all available magnetometer drivers`
			`magnetometer/hmc5883`
			`#mkblctrl`
Move optical flow drivers to own subdirectory 2019-05-28 14:41:30 -04:00			`#optical_flow # all available optical flow drivers`
			`optical_flow/px4flow`
boards organization 2018-11-16 12:52:37 -05:00			`#pca9685`
drivers create lights category (directory) 2018-12-01 13:53:54 -05:00			`#protocol_splitter`
boards organization 2018-11-16 12:52:37 -05:00			`#pwm_input`
			`#pwm_out_sim`
			`px4fmu`
			`px4io`
			`#tap_esc`
			`#telemetry # all available telemetry drivers`
			`#test_ppm`
ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class. 2019-01-10 14:39:27 -07:00			`tone_alarm`
move uavcan from modules to drivers 2018-12-01 14:00:46 -05:00			`#uavcan`
boards organization 2018-11-16 12:52:37 -05:00
			`MODULES`
			`#attitude_estimator_q`
Update matrix submodule and add pseudoinverse tests (tests matrix) 2019-11-21 19:06:59 +01:00			`# camera_feedback`
boards organization 2018-11-16 12:52:37 -05:00			`commander`
			`dataman`
			`#ekf2`
			`events`
			`#fw_att_control`
			`#fw_pos_control_l1`
Rover: Rewrote gnd_pos_control and removed gnd_att_control (#12239) 2019-07-11 15:39:13 +02:00			`#rover_pos_control`
Update matrix submodule and add pseudoinverse tests (tests matrix) 2019-11-21 19:06:59 +01:00			`# land_detector`
			`# landing_target_estimator`
boards organization 2018-11-16 12:52:37 -05:00			`load_mon`
			`#local_position_estimator`
			`logger`
			`mavlink`
			`mc_att_control`
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control 2019-11-19 17:03:11 -05:00			`mc_rate_control`
boards organization 2018-11-16 12:52:37 -05:00			`mc_pos_control`
			`navigator`
sensors: split out analog battery handling to new standalone battery_status module 2019-10-21 13:40:23 -04:00			`battery_status`
boards organization 2018-11-16 12:52:37 -05:00			`sensors`
move vmount to modules (it's not a driver) 2018-12-01 13:58:15 -05:00			`vmount`
Update matrix submodule and add pseudoinverse tests (tests matrix) 2019-11-21 19:06:59 +01:00			`# vtol_att_control`
Airspeed Selector: repurpose wind estimator into an airspeed (selection, validation) module. This new airspeed module does: -runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale -selects another airspeed sensor if for the current one a failure is detected -estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present -outputs airspeed_validated topic Signed-off-by: Silvan Fuhrer <silvan@auterion.com> 2019-08-07 13:06:00 +02:00			`#airspeed_selector`
boards organization 2018-11-16 12:52:37 -05:00
			`SYSTEMCMDS`
			`#bl_update`
			`#config`
			`#dumpfile`
			`#esc_calib`
			`hardfault_log`
create systemcmds/i2cdetect tool to scan i2c bus 2019-07-05 14:21:42 -04:00			`i2cdetect`
boards organization 2018-11-16 12:52:37 -05:00			`#led_control`
			`mixer`
			`#motor_ramp`
			`motor_test`
			`mtd`
			`#nshterm`
			`param`
			`perf`
			`pwm`
			`reboot`
			`sd_bench`
			`tests # tests and test runner`
			`top`
			`#topic_listener`
			`tune_control`
			`ver`
px4_work_queue: command line status output and shutdown empty queues * adds a work_queue systemcmd that will bring a tree view of all active work queues and work items * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached 2019-10-02 12:23:17 -04:00			`work_queue`
boards organization 2018-11-16 12:52:37 -05:00
			`EXAMPLES`
			`#bottle_drop # OBC challenge`
			`#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control`
move posix/tests/hello to examples/hello and include everywhere 2018-11-24 11:52:07 -05:00			`#hello`
boards organization 2018-11-16 12:52:37 -05:00			`#hwtest # Hardware test`
Correct links to example docs 2019-03-13 09:33:27 +11:00			`#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html`
			`#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html`
boards organization 2018-11-16 12:52:37 -05:00			`#rover_steering_control # Rover example app`
			`)`