boards/px4/fmu-v4/stackcheck.cmake


px4_add_board(
	PLATFORM nuttx
	VENDOR px4
	MODEL fmu-v4
	LABEL stackcheck
	TOOLCHAIN arm-none-eabi
	ARCHITECTURE cortex-m4
	ROMFSROOT px4fmu_common
	TESTING
	#UAVCAN_INTERFACES 1
	SERIAL_PORTS
		GPS1:/dev/ttyS3
		TEL1:/dev/ttyS1
		TEL2:/dev/ttyS2
	DRIVERS
		adc
		barometer # all available barometer drivers
		batt_smbus
		camera_capture
		camera_trigger
		differential_pressure # all available differential pressure drivers
		distance_sensor # all available distance sensor drivers
		dshot
		gps
		heater
		#imu # all available imu drivers
		#imu/adis16448
		#imu/adis16477
		#imu/adis16497
		imu/invensense/icm20602
		imu/invensense/icm20608g
		#imu/invensense/icm40609d
		#imu/invensense/mpu6500
		#imu/invensense/mpu9250
		irlock
		lights/blinkm
		lights/rgbled
		lights/rgbled_ncp5623c
		magnetometer # all available magnetometer drivers
		mkblctrl
		optical_flow # all available optical flow drivers
		#osd
		pca9685
		#protocol_splitter
		pwm_input
		pwm_out_sim
		pwm_out
		rc_input
		#roboclaw
		safety_button
		tap_esc
		telemetry # all available telemetry drivers
		test_ppm
		tone_alarm
		#uavcan
	MODULES
		airspeed_selector
		attitude_estimator_q
		battery_status
		camera_feedback
		commander
		dataman
		ekf2
		events
		fw_att_control
		fw_pos_control_l1
		land_detector
		landing_target_estimator
		load_mon
		local_position_estimator
		logger
		mavlink
		mc_att_control
		mc_hover_thrust_estimator
		mc_pos_control
		mc_rate_control
		#micrortps_bridge
		navigator
		rc_update
		rover_pos_control
		sensors
		sih
		temperature_compensation
		#uuv_att_control
		vmount
		vtol_att_control
	SYSTEMCMDS
		bl_update
		#dmesg
		dumpfile
		esc_calib
		hardfault_log
		i2cdetect
		led_control
		mixer
		motor_ramp
		motor_test
		mtd
		nshterm
		param
		perf
		pwm
		reboot
		reflect
		sd_bench
		tests # tests and test runner
		top
		topic_listener
		tune_control
		usb_connected
		ver
		work_queue
	EXAMPLES
		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
		#hello
		#hwtest # Hardware test
		#matlab_csv_serial
		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
		#rover_steering_control # Rover example app
		#uuv_example_app
		#work_item
	)
boards organization 2018-11-16 12:52:37 -05:00
			`px4_add_board(`
			`PLATFORM nuttx`
			`VENDOR px4`
			`MODEL fmu-v4`
			`LABEL stackcheck`
cmake remove need for platform px4_add_board_os - explicitly set TOOLCHAIN on all NuttX targets 2018-11-23 10:01:03 -05:00			`TOOLCHAIN arm-none-eabi`
cmake use standard mechanisms for settings flags 2018-11-23 12:39:44 -05:00			`ARCHITECTURE cortex-m4`
boards organization 2018-11-16 12:52:37 -05:00			`ROMFSROOT px4fmu_common`
			`TESTING`
			`#UAVCAN_INTERFACES 1`
			`SERIAL_PORTS`
			`GPS1:/dev/ttyS3`
			`TEL1:/dev/ttyS1`
			`TEL2:/dev/ttyS2`
			`DRIVERS`
adc: refactor into arch-specific directories 2019-08-26 14:21:49 +02:00			`adc`
boards organization 2018-11-16 12:52:37 -05:00			`barometer # all available barometer drivers`
			`batt_smbus`
camera_capture add to all boards 2019-02-11 14:15:28 -05:00			`camera_capture`
boards organization 2018-11-16 12:52:37 -05:00			`camera_trigger`
			`differential_pressure # all available differential pressure drivers`
			`distance_sensor # all available distance sensor drivers`
px4_fmu-v4: deprecate boscch pixracer variant and cleanup SPI devs 2019-11-11 16:04:10 -05:00			`dshot`
boards organization 2018-11-16 12:52:37 -05:00			`gps`
			`heater`
px4_fmu-v4: deprecate boscch pixracer variant and cleanup SPI devs 2019-11-11 16:04:10 -05:00			`#imu # all available imu drivers`
boards: alphabetize and sync common drivers and modules 2019-11-19 19:59:09 -05:00			`#imu/adis16448`
			`#imu/adis16477`
			`#imu/adis16497`
invensense icm20608g improvements - checked register mechanism and simple watchdog - driver checks for errors gradually and can reconfigure itself - respect IMU_GYRO_RATEMAX at the driver level - fixed sensor INT16_MIN and INT16_MAX handling (y & z axis are flipped before publishing) 2020-02-18 21:29:38 -05:00			`imu/invensense/icm20602`
			`imu/invensense/icm20608g`
switch remaining boards to new InvenSense IMU drivers 2020-03-25 01:07:33 -04:00			`#imu/invensense/icm40609d`
			`#imu/invensense/mpu6500`
invensense icm20608g improvements - checked register mechanism and simple watchdog - driver checks for errors gradually and can reconfigure itself - respect IMU_GYRO_RATEMAX at the driver level - fixed sensor INT16_MIN and INT16_MAX handling (y & z axis are flipped before publishing) 2020-02-18 21:29:38 -05:00			`#imu/invensense/mpu9250`
boards organization 2018-11-16 12:52:37 -05:00			`irlock`
px4_fmu-v4_stackcheck sync with default and increase pmw3901 main stack 2019-01-29 14:14:29 -05:00			`lights/blinkm`
			`lights/rgbled`
			`lights/rgbled_ncp5623c`
boards organization 2018-11-16 12:52:37 -05:00			`magnetometer # all available magnetometer drivers`
			`mkblctrl`
Move optical flow drivers to own subdirectory 2019-05-28 14:41:30 -04:00			`optical_flow # all available optical flow drivers`
boards: alphabetize and sync common drivers and modules 2019-11-19 19:59:09 -05:00			`#osd`
boards organization 2018-11-16 12:52:37 -05:00			`pca9685`
boards: alphabetize and sync common drivers and modules 2019-11-19 19:59:09 -05:00			`#protocol_splitter`
boards organization 2018-11-16 12:52:37 -05:00			`pwm_input`
			`pwm_out_sim`
rename drivers/px4fmu -> drivers/pwm_out - split out header 2020-03-27 15:31:04 -04:00			`pwm_out`
boards organization 2018-11-16 12:52:37 -05:00			`rc_input`
boards: alphabetize and sync common drivers and modules 2019-11-19 19:59:09 -05:00			`#roboclaw`
px4fmu split safety button into new driver 2019-08-24 17:14:17 -04:00			`safety_button`
boards organization 2018-11-16 12:52:37 -05:00			`tap_esc`
			`telemetry # all available telemetry drivers`
			`test_ppm`
ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class. 2019-01-10 14:39:27 -07:00			`tone_alarm`
move uavcan from modules to drivers 2018-12-01 14:00:46 -05:00			`#uavcan`
boards organization 2018-11-16 12:52:37 -05:00			`MODULES`
px4_fmu-v4: deprecate boscch pixracer variant and cleanup SPI devs 2019-11-11 16:04:10 -05:00			`airspeed_selector`
boards organization 2018-11-16 12:52:37 -05:00			`attitude_estimator_q`
px4_fmu-v4: deprecate boscch pixracer variant and cleanup SPI devs 2019-11-11 16:04:10 -05:00			`battery_status`
boards organization 2018-11-16 12:52:37 -05:00			`camera_feedback`
			`commander`
			`dataman`
			`ekf2`
			`events`
			`fw_att_control`
			`fw_pos_control_l1`
			`land_detector`
			`landing_target_estimator`
			`load_mon`
			`local_position_estimator`
			`logger`
			`mavlink`
			`mc_att_control`
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) * MC_HTE: unitialize with hover_thrust parameter * MC_HTE: constrain hover thrust setter between 0.1 and 0.9 * MC_HTE: integrate with land detector and velocity controller * MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value. * MC_HTE: use altitude agl threshold to start the estimator local_position.z is relative to the origin of the EKF while dist_bottom is above ground Co-authored-by: bresch <brescianimathieu@gmail.com> 2020-03-11 21:20:54 -04:00			`mc_hover_thrust_estimator`
boards organization 2018-11-16 12:52:37 -05:00			`mc_pos_control`
boards: alphabetize and sync common drivers and modules 2019-11-19 19:59:09 -05:00			`mc_rate_control`
invensense icm20608g improvements - checked register mechanism and simple watchdog - driver checks for errors gradually and can reconfigure itself - respect IMU_GYRO_RATEMAX at the driver level - fixed sensor INT16_MIN and INT16_MAX handling (y & z axis are flipped before publishing) 2020-02-18 21:29:38 -05:00			`#micrortps_bridge`
boards organization 2018-11-16 12:52:37 -05:00			`navigator`
sensors split rc_update into new standalone module 2019-11-24 13:25:11 -05:00			`rc_update`
px4_fmu-v4: deprecate boscch pixracer variant and cleanup SPI devs 2019-11-11 16:04:10 -05:00			`rover_pos_control`
boards organization 2018-11-16 12:52:37 -05:00			`sensors`
new airframe for sih, HIL_STATE_QUATERION sent through MAVLink 2019-04-11 10:38:49 +02:00			`sih`
create temperature_compensation module - this is a new module for temperature compensation that consolidates the functionality previously handled in the sensors module (calculating runtime thermal corrections) and the events module (online thermal calibration) - by collecting this functionality into a single module we can optionally disable it on systems where it's not used and save some flash (if disabled at build time) or memory (disabled at run time) 2020-01-20 21:42:42 -05:00			`temperature_compensation`
invensense icm20608g improvements - checked register mechanism and simple watchdog - driver checks for errors gradually and can reconfigure itself - respect IMU_GYRO_RATEMAX at the driver level - fixed sensor INT16_MIN and INT16_MAX handling (y & z axis are flipped before publishing) 2020-02-18 21:29:38 -05:00			`#uuv_att_control`
move vmount to modules (it's not a driver) 2018-12-01 13:58:15 -05:00			`vmount`
boards organization 2018-11-16 12:52:37 -05:00			`vtol_att_control`
			`SYSTEMCMDS`
			`bl_update`
boards: alphabetize and sync common drivers and modules 2019-11-19 19:59:09 -05:00			`#dmesg`
boards organization 2018-11-16 12:52:37 -05:00			`dumpfile`
			`esc_calib`
			`hardfault_log`
create systemcmds/i2cdetect tool to scan i2c bus 2019-07-05 14:21:42 -04:00			`i2cdetect`
boards organization 2018-11-16 12:52:37 -05:00			`led_control`
			`mixer`
			`motor_ramp`
			`motor_test`
			`mtd`
			`nshterm`
			`param`
			`perf`
			`pwm`
			`reboot`
			`reflect`
			`sd_bench`
			`tests # tests and test runner`
			`top`
			`topic_listener`
			`tune_control`
			`usb_connected`
			`ver`
px4_work_queue: command line status output and shutdown empty queues * adds a work_queue systemcmd that will bring a tree view of all active work queues and work items * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached 2019-10-02 12:23:17 -04:00			`work_queue`
boards organization 2018-11-16 12:52:37 -05:00			`EXAMPLES`
			`#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control`
move posix/tests/hello to examples/hello and include everywhere 2018-11-24 11:52:07 -05:00			`#hello`
boards organization 2018-11-16 12:52:37 -05:00			`#hwtest # Hardware test`
			`#matlab_csv_serial`
Correct links to example docs 2019-03-13 09:33:27 +11:00			`#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html`
			`#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html`
boards organization 2018-11-16 12:52:37 -05:00			`#rover_steering_control # Rover example app`
			`#uuv_example_app`
examples: add simple work_item example module 2020-04-05 10:20:19 -04:00			`#work_item`
boards organization 2018-11-16 12:52:37 -05:00			`)`