/* * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include "sdkconfig.h" #include "esp_rom_sys.h" #include "esp_attr.h" /* ================ USB common Configuration ================ */ #define CONFIG_USB_PRINTF(...) esp_rom_printf(__VA_ARGS__) #ifndef CONFIG_USB_DBG_LEVEL #define CONFIG_USB_DBG_LEVEL USB_DBG_INFO #endif /* Enable print with color */ #define CONFIG_USB_PRINTF_COLOR_ENABLE /* data align size when use dma or use dcache */ #ifndef CONFIG_USB_ALIGN_SIZE #define CONFIG_USB_ALIGN_SIZE 4 #endif // #define CONFIG_USB_DCACHE_ENABLE /* attribute data into no cache ram * DRAM_DMA_ALIGNED_ATTR was introduced in IDF 5.3. If not defined, it falls back to DMA_ATTR */ #ifndef DRAM_DMA_ALIGNED_ATTR #define DRAM_DMA_ALIGNED_ATTR DMA_ATTR #endif #define USB_NOCACHE_RAM_SECTION DRAM_DMA_ALIGNED_ATTR /* use usb_memcpy default for high performance but cost more flash memory. * And, arm libc has a bug that memcpy() may cause data misalignment when the size is not a multiple of 4. */ // #define CONFIG_USB_MEMCPY_DISABLE /* ================= USB Device Stack Configuration ================ */ /* Ep0 in and out transfer buffer */ #ifndef CONFIG_USBDEV_REQUEST_BUFFER_LEN #define CONFIG_USBDEV_REQUEST_BUFFER_LEN 512 #endif /* Setup packet log for debug */ // #define CONFIG_USBDEV_SETUP_LOG_PRINT /* Send ep0 in data from user buffer instead of copying into ep0 reqdata * Please note that user buffer must be aligned with CONFIG_USB_ALIGN_SIZE */ // #define CONFIG_USBDEV_EP0_INDATA_NO_COPY /* Check if the input descriptor is correct */ // #define CONFIG_USBDEV_DESC_CHECK /* Enable test mode */ // #define CONFIG_USBDEV_TEST_MODE /* enable advance desc register api */ #define CONFIG_USBDEV_ADVANCE_DESC /* move ep0 setup handler from isr to thread */ // #define CONFIG_USBDEV_EP0_THREAD #ifndef CONFIG_USBDEV_EP0_PRIO #define CONFIG_USBDEV_EP0_PRIO 4 #endif #ifndef CONFIG_USBDEV_EP0_STACKSIZE #define CONFIG_USBDEV_EP0_STACKSIZE 2048 #endif #ifndef CONFIG_USBDEV_MSC_MAX_LUN #define CONFIG_USBDEV_MSC_MAX_LUN 1 #endif #ifndef CONFIG_USBDEV_MSC_MAX_BUFSIZE #define CONFIG_USBDEV_MSC_MAX_BUFSIZE 512 #endif #ifndef CONFIG_USBDEV_MSC_MANUFACTURER_STRING #define CONFIG_USBDEV_MSC_MANUFACTURER_STRING "" #endif #ifndef CONFIG_USBDEV_MSC_PRODUCT_STRING #define CONFIG_USBDEV_MSC_PRODUCT_STRING "" #endif #ifndef CONFIG_USBDEV_MSC_VERSION_STRING #define CONFIG_USBDEV_MSC_VERSION_STRING "0.01" #endif /* move msc read & write from isr to while(1), you should call usbd_msc_polling in while(1) */ // #define CONFIG_USBDEV_MSC_POLLING /* move msc read & write from isr to thread */ #define CONFIG_USBDEV_MSC_THREAD #ifndef CONFIG_USBDEV_MSC_PRIO #define CONFIG_USBDEV_MSC_PRIO 4 #endif #ifndef CONFIG_USBDEV_MSC_STACKSIZE #define CONFIG_USBDEV_MSC_STACKSIZE 2048 #endif #ifndef CONFIG_USBDEV_MTP_MAX_BUFSIZE #define CONFIG_USBDEV_MTP_MAX_BUFSIZE 2048 #endif #ifndef CONFIG_USBDEV_MTP_MAX_OBJECTS #define CONFIG_USBDEV_MTP_MAX_OBJECTS 256 #endif #ifndef CONFIG_USBDEV_MTP_MAX_PATHNAME #define CONFIG_USBDEV_MTP_MAX_PATHNAME 256 #endif #define CONFIG_USBDEV_MTP_THREAD #ifndef CONFIG_USBDEV_MTP_PRIO #define CONFIG_USBDEV_MTP_PRIO 4 #endif #ifndef CONFIG_USBDEV_MTP_STACKSIZE #define CONFIG_USBDEV_MTP_STACKSIZE 4096 #endif #ifndef CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE #define CONFIG_USBDEV_RNDIS_RESP_BUFFER_SIZE 156 #endif /* rndis transfer buffer size, must be a multiple of (1536 + 44)*/ #ifndef CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE #define CONFIG_USBDEV_RNDIS_ETH_MAX_FRAME_SIZE 1580 #endif #ifndef CONFIG_USBDEV_RNDIS_VENDOR_ID #define CONFIG_USBDEV_RNDIS_VENDOR_ID 0x0000ffff #endif #ifndef CONFIG_USBDEV_RNDIS_VENDOR_DESC #define CONFIG_USBDEV_RNDIS_VENDOR_DESC "CherryUSB" #endif #define CONFIG_USBDEV_RNDIS_USING_LWIP #define CONFIG_USBDEV_CDC_ECM_USING_LWIP /* ================ USB HOST Stack Configuration ================== */ #define CONFIG_USBHOST_MAX_RHPORTS 1 #define CONFIG_USBHOST_MAX_EXTHUBS 1 #define CONFIG_USBHOST_MAX_EHPORTS 4 #define CONFIG_USBHOST_MAX_INTERFACES 8 #define CONFIG_USBHOST_MAX_INTF_ALTSETTINGS 2 #define CONFIG_USBHOST_MAX_ENDPOINTS 4 #define CONFIG_USBHOST_MAX_CDC_ACM_CLASS 4 #define CONFIG_USBHOST_MAX_HID_CLASS 4 #define CONFIG_USBHOST_MAX_MSC_CLASS 2 #define CONFIG_USBHOST_MAX_AUDIO_CLASS 1 #define CONFIG_USBHOST_MAX_VIDEO_CLASS 1 #define CONFIG_USBHOST_DEV_NAMELEN 16 #ifndef CONFIG_USBHOST_PSC_PRIO #define CONFIG_USBHOST_PSC_PRIO 0 #endif #ifndef CONFIG_USBHOST_PSC_STACKSIZE #define CONFIG_USBHOST_PSC_STACKSIZE 4096 #endif //#define CONFIG_USBHOST_GET_STRING_DESC // #define CONFIG_USBHOST_MSOS_ENABLE #ifndef CONFIG_USBHOST_MSOS_VENDOR_CODE #define CONFIG_USBHOST_MSOS_VENDOR_CODE 0x00 #endif /* Ep0 max transfer buffer */ #ifndef CONFIG_USBHOST_REQUEST_BUFFER_LEN #define CONFIG_USBHOST_REQUEST_BUFFER_LEN 2048 #endif #ifndef CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT #define CONFIG_USBHOST_CONTROL_TRANSFER_TIMEOUT 500 #endif #ifndef CONFIG_USBHOST_MSC_TIMEOUT #define CONFIG_USBHOST_MSC_TIMEOUT 5000 #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_RNDIS_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_RNDIS_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_RNDIS_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_RNDIS_ETH_MAX_TX_SIZE (2048) #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_CDC_NCM_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_CDC_NCM_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_CDC_NCM_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_CDC_NCM_ETH_MAX_TX_SIZE (2048) #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_ASIX_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_ASIX_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_ASIX_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_ASIX_ETH_MAX_TX_SIZE (2048) #endif /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size, * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow. */ #ifndef CONFIG_USBHOST_RTL8152_ETH_MAX_RX_SIZE #define CONFIG_USBHOST_RTL8152_ETH_MAX_RX_SIZE (2048) #endif /* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */ #ifndef CONFIG_USBHOST_RTL8152_ETH_MAX_TX_SIZE #define CONFIG_USBHOST_RTL8152_ETH_MAX_TX_SIZE (2048) #endif #define CONFIG_USBHOST_BLUETOOTH_HCI_H4 // #define CONFIG_USBHOST_BLUETOOTH_HCI_LOG #ifndef CONFIG_USBHOST_BLUETOOTH_TX_SIZE #define CONFIG_USBHOST_BLUETOOTH_TX_SIZE 2048 #endif #ifndef CONFIG_USBHOST_BLUETOOTH_RX_SIZE #define CONFIG_USBHOST_BLUETOOTH_RX_SIZE 2048 #endif #if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 #define ESP_USB_FS0_BASE 0x60080000 #define ESP_USBD_BASE ESP_USB_FS0_BASE #define ESP_USBH_BASE ESP_USB_FS0_BASE #define CONFIG_USBDEV_MAX_BUS 1 #define CONFIG_USBHOST_MAX_BUS 1 #elif CONFIG_IDF_TARGET_ESP32P4 #define ESP_USB_HS0_BASE 0x50000000 #define ESP_USB_FS0_BASE 0x50040000 #define ESP_USBD_BASE ESP_USB_HS0_BASE #define ESP_USBH_BASE ESP_USB_HS0_BASE #define CONFIG_USBDEV_MAX_BUS 2 #define CONFIG_USBHOST_MAX_BUS 2 #define CONFIG_USB_HS #else #error "Unsupported SoC" #endif #if CONFIG_IDF_TARGET_ESP32P4 #define CONFIG_USB_DCACHE_ENABLE #undef CONFIG_USB_ALIGN_SIZE #define CONFIG_USB_ALIGN_SIZE CONFIG_CACHE_L1_CACHE_LINE_SIZE #endif