sakumisu
6db4fbba4c
add check for hpm
2024-05-04 14:21:13 +08:00
sakumisu
2da4edf76b
remove port param in usbd_get_port_speed
2024-04-29 11:35:29 +08:00
sakumisu
2cb6c598c1
update missing license
2024-04-23 13:04:41 +08:00
sakumisu
b97fc903c0
clear urb timeout after take sem, follow 76f58b93
2024-04-19 11:52:04 +08:00
sakumisu
76f58b93fe
do not clear timeout in irq,urb init will sometime call irq before take sem
2024-04-18 21:11:36 +08:00
sakumisu
51b9640489
add missing license
2024-04-16 22:11:30 +08:00
sakumisu
32f96f4248
remove duplicate h7 config
2024-04-16 21:52:52 +08:00
sakumisu
e3886fe99d
format comment
2024-04-16 21:48:11 +08:00
zhaofx4534
d8714d8169
enable bit21(VBUSSIG) in gd chips
2024-04-15 21:36:58 +08:00
sakumisu
3592794393
import bouffalo dcd
2024-04-14 19:35:48 +08:00
sakumisu
8119a500b2
change CONFIG_USB_DWC2_ULPI_PHY to CONFIG_USB_HS, support stm32f723
2024-04-07 13:20:33 +08:00
sakumisu
c5f2ffa6f9
export ehci config macros
2024-04-07 13:17:01 +08:00
sakumisu
db10c62b59
read ehci hcor offset from hccr caplength
2024-04-06 20:19:53 +08:00
sakumisu
808cd454a3
init ohci for ehci
2024-04-04 16:43:05 +08:00
sakumisu
6ef086a085
add check for dwc2 fifo with ep mps
2024-04-03 15:44:43 +08:00
sakumisu
078e21066c
mark errorcode with USB_ERR_SHUTDOWN when kill urb
2024-03-28 21:00:18 +08:00
sakumisu
4164e687f0
comment test mode api
2024-03-28 20:42:53 +08:00
sakumisu
22121bc54d
fix warning in 64bit
2024-03-27 21:23:14 +08:00
sakumisu
68708c0f3a
fix aic irq param num and add usbh_init api
2024-03-27 20:43:18 +08:00
sakumisu
74bb03b8b4
remove qtd alloc & free, use static pool instead
2024-03-26 20:41:17 +08:00
sakumisu
bc6ed589b0
update aic glue
2024-03-25 21:01:56 +08:00
sakumisu
f99e4ce113
use only one qh for intr, following with linux driver
2024-03-25 19:53:22 +08:00
sakumisu
3c16d7c61c
update ehci glue
2024-03-24 14:24:10 +08:00
sakumisu
f4a0ba9839
dwc2:get next toggle from HCTSIZ
2024-03-22 19:31:47 +08:00
sakumisu
26e2436847
dwc2:add fifo macros for users to config
2024-03-21 23:07:07 +08:00
sakumisu
6cb442503d
add usb_hc_low_level_deinit api
2024-03-21 21:04:10 +08:00
sakumisu
9dbc441082
update esp glue
2024-03-21 20:31:35 +08:00
sakumisu
44c408959b
dwc2:add HCCHAR register init api, only enable chan halt irq, buffer dma mode just need this
2024-03-21 19:11:56 +08:00
sakumisu
aa1a30d581
dwc2:add register for desc dma mode
2024-03-20 21:54:43 +08:00
sakumisu
235139ad77
dwc2:simplify chan irq code
2024-03-20 21:53:49 +08:00
sakumisu
b2af686e67
dwc2:change dma incr to 16, flush fifo after fifo config
2024-03-20 21:53:22 +08:00
sakumisu
15b97f3348
ehci:fix missing bus param
2024-03-20 21:52:04 +08:00
sakumisu
b628c737ec
add esp dwc2 glue
2024-03-17 22:48:35 +08:00
Zhihong Chen
4c062d4442
port: HPMicro: update usb_dc_hpm.c
...
- support usbd_execute_test_mode() API
- interrupt should be check dtd active status
- update usbd_ep_open() time sequence
- change irq return to break
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-03-13 19:25:07 +08:00
Zhihong Chen
9e9772fde7
HPMicro: port: fix usbd_ep_close() not reset ep_enable flag
...
- fix usbd_ep_close() not reset ep_enable flag
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-03-04 22:00:21 +08:00
sakumisu
850e96577c
fix missing bus in sunxi
2024-03-02 13:14:58 +08:00
sakumisu
9e0cc8347c
align for some buffers
2024-02-24 16:38:57 +08:00
sakumisu
8c72947794
fix bl glue
2024-02-24 16:34:43 +08:00
Zhihong Chen
b4e952b371
port: HPMicro: call suspend/connect/disconnect event
...
- call suspend/connect/disconnect event
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-23 16:55:58 +08:00
Zhihong Chen
743669861e
port: HPMicro: fix transfer_len not reset
...
- fix transfer_len not reset
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-20 22:10:56 +08:00
Zhihong Chen
0e3e9477cc
port: HPMicro: decoupling the relationship between busid and usbid
...
- decoupling the relationship between busid and usbid
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-20 14:28:10 +08:00
Zhihong Chen
556fd6af63
HPMicro: port: fix _dcd_data align to 2048
...
- fix _dcd_data align to 2048
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-19 20:19:48 +08:00
sakumisu
e0551b3e7b
config busid and regbase in usbh_initialize and usbd_initialize
2024-02-18 21:15:04 +08:00
sakumisu
4313a2666e
check if device is on extern hub
2024-02-09 12:35:44 +08:00
sakumisu
e34ecc6cbb
add volatile for HcEpType & ChannelEna
2024-02-07 21:37:17 +08:00
sakumisu
d1c7fa8c19
support multi port api for device
2024-02-06 19:52:22 +08:00
sakumisu
6b0a0135ac
remove ununsed macro
2024-01-23 07:39:41 +08:00
sakumisu
04a300d803
remove ununsed header
2024-01-19 23:08:04 +08:00
Zhihong Chen
c4a65146e8
port: hpmicro: fix usb_dc_deinit()
...
- fix usb_dc_deinit()
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-01-14 17:00:40 +08:00
sakumisu
125aad65d6
dwc2 use fifo not dma as default because users may have problems in cache
2024-01-13 00:22:03 +08:00
