sakumisu
3be08d16f7
update(port/dwc2): rename struct name to avoid duplicate definitions
2024-05-21 11:50:49 +08:00
sakumisu
5dafdcb895
fix warning
2024-05-21 10:10:31 +08:00
sakumisu
3a3de9cb69
update: format log
2024-05-17 17:22:25 +08:00
sakumisu
8b805ee6d7
fix(dwc2): check those chips with 1.25KB fifo
2024-05-15 23:07:46 +08:00
sakumisu
5e6bd78f80
update(dwc2): change rx fifo to 1024/4 as default
2024-05-15 22:37:57 +08:00
sakumisu
2da4edf76b
remove port param in usbd_get_port_speed
2024-04-29 11:35:29 +08:00
sakumisu
2cb6c598c1
update missing license
2024-04-23 13:04:41 +08:00
sakumisu
b97fc903c0
clear urb timeout after take sem, follow 76f58b93
2024-04-19 11:52:04 +08:00
sakumisu
76f58b93fe
do not clear timeout in irq,urb init will sometime call irq before take sem
2024-04-18 21:11:36 +08:00
sakumisu
51b9640489
add missing license
2024-04-16 22:11:30 +08:00
sakumisu
32f96f4248
remove duplicate h7 config
2024-04-16 21:52:52 +08:00
sakumisu
e3886fe99d
format comment
2024-04-16 21:48:11 +08:00
zhaofx4534
d8714d8169
enable bit21(VBUSSIG) in gd chips
2024-04-15 21:36:58 +08:00
sakumisu
8119a500b2
change CONFIG_USB_DWC2_ULPI_PHY to CONFIG_USB_HS, support stm32f723
2024-04-07 13:20:33 +08:00
sakumisu
6ef086a085
add check for dwc2 fifo with ep mps
2024-04-03 15:44:43 +08:00
sakumisu
078e21066c
mark errorcode with USB_ERR_SHUTDOWN when kill urb
2024-03-28 21:00:18 +08:00
sakumisu
f4a0ba9839
dwc2:get next toggle from HCTSIZ
2024-03-22 19:31:47 +08:00
sakumisu
26e2436847
dwc2:add fifo macros for users to config
2024-03-21 23:07:07 +08:00
sakumisu
6cb442503d
add usb_hc_low_level_deinit api
2024-03-21 21:04:10 +08:00
sakumisu
9dbc441082
update esp glue
2024-03-21 20:31:35 +08:00
sakumisu
44c408959b
dwc2:add HCCHAR register init api, only enable chan halt irq, buffer dma mode just need this
2024-03-21 19:11:56 +08:00
sakumisu
aa1a30d581
dwc2:add register for desc dma mode
2024-03-20 21:54:43 +08:00
sakumisu
235139ad77
dwc2:simplify chan irq code
2024-03-20 21:53:49 +08:00
sakumisu
b2af686e67
dwc2:change dma incr to 16, flush fifo after fifo config
2024-03-20 21:53:22 +08:00
sakumisu
b628c737ec
add esp dwc2 glue
2024-03-17 22:48:35 +08:00
sakumisu
e0551b3e7b
config busid and regbase in usbh_initialize and usbd_initialize
2024-02-18 21:15:04 +08:00
sakumisu
4313a2666e
check if device is on extern hub
2024-02-09 12:35:44 +08:00
sakumisu
e34ecc6cbb
add volatile for HcEpType & ChannelEna
2024-02-07 21:37:17 +08:00
sakumisu
d1c7fa8c19
support multi port api for device
2024-02-06 19:52:22 +08:00
sakumisu
125aad65d6
dwc2 use fifo not dma as default because users may have problems in cache
2024-01-13 00:22:03 +08:00
sakumisu
1158fc3d8c
support multi USB IP for host
2024-01-08 22:47:28 +08:00
sakumisu
5fe66b4f0d
dwc2: ctrl and bulk no need nak irq, when intr calls nak, retry by user
2024-01-06 01:09:55 +08:00
sakumisu
cbfac7ec0c
dwc2 low level deinit after usb register reset
2024-01-06 01:07:39 +08:00
sakumisu
67a3bbe02e
fix hctsiz macro name
2023-12-30 14:39:34 +08:00
sakumisu
65b2de960b
update gccfg for stm32h7/f7
2023-12-30 14:39:26 +08:00
sakumisu
019c9cff6e
fix dwc2 out chan actual len
2023-12-28 20:57:50 +08:00
sakumisu
8cd31e6be0
add check for dwc2 ramsize and ep num
2023-12-26 20:11:23 +08:00
sakumisu
f68a86ea89
add usbh_deinitialize api
2023-12-24 23:37:47 +08:00
sakumisu
8a831cdaa5
user must define some configs in usb_config.h when use fsdev/musb/dwc2
2023-12-21 21:58:08 +08:00
sakumisu
29d45ef5c7
replace struct usbd_endpoint_cfg with struct usb_endpoint_descriptor in usbh_ep_open api
2023-12-10 22:34:01 +08:00
FanHuaCloud
a1ed27523c
AT32 gccfg adds the vbusig flag by default
2023-12-09 14:45:14 +08:00
sakumisu
14f1f597f1
add usb errno, do not use system errno
2023-12-05 21:34:32 +08:00
sakumisu
c90f273e24
port and add comment for gccfg with gd/at/st
2023-11-27 20:30:15 +08:00
sakumisu
3440e0cc1d
move out dwc2 ggcfg register and config by user
2023-11-26 22:59:41 +08:00
sakumisu
5b32482c3e
free pipe after sem giving
2023-11-22 21:42:56 +08:00
sakumisu
5bbe2a97f2
refactor urb, add ep & hport in urb to make hardware pipe more reusable
2023-11-16 19:56:52 +08:00
Wayne Lin
dd1f1d3ba8
Update hcd-ehci, dcd-dwc2 and examples.
...
1. Add some example Msh commands.
2. Fix device enumeration on EXT hub.
3. Re-file some templates.
4. Extend end-point number of dwc2 device driver.
5. Re-file rndis_host implementation includes
a. rt_mutex_take in ISR
b. 2rd pmsg is unaligned issue.
c. destroy u0 ethernet resource after removing dongle.
2023-09-07 15:07:04 +08:00
sakumisu
bc1e7c4bd5
ignore dwc2 EPENA check
2023-09-04 15:43:32 +08:00
sakumisu
fed6f26ebd
fix log
2023-07-14 17:58:39 +08:00
sakumisu
c8ecf31c99
remove ununsed code
2023-07-13 20:13:51 +08:00
