sakumisu
4164e687f0
comment test mode api
2024-03-28 20:42:53 +08:00
sakumisu
22121bc54d
fix warning in 64bit
2024-03-27 21:23:14 +08:00
sakumisu
68708c0f3a
fix aic irq param num and add usbh_init api
2024-03-27 20:43:18 +08:00
sakumisu
74bb03b8b4
remove qtd alloc & free, use static pool instead
2024-03-26 20:41:17 +08:00
sakumisu
bc6ed589b0
update aic glue
2024-03-25 21:01:56 +08:00
sakumisu
f99e4ce113
use only one qh for intr, following with linux driver
2024-03-25 19:53:22 +08:00
sakumisu
3c16d7c61c
update ehci glue
2024-03-24 14:24:10 +08:00
sakumisu
f4a0ba9839
dwc2:get next toggle from HCTSIZ
2024-03-22 19:31:47 +08:00
sakumisu
26e2436847
dwc2:add fifo macros for users to config
2024-03-21 23:07:07 +08:00
sakumisu
6cb442503d
add usb_hc_low_level_deinit api
2024-03-21 21:04:10 +08:00
sakumisu
9dbc441082
update esp glue
2024-03-21 20:31:35 +08:00
sakumisu
44c408959b
dwc2:add HCCHAR register init api, only enable chan halt irq, buffer dma mode just need this
2024-03-21 19:11:56 +08:00
sakumisu
aa1a30d581
dwc2:add register for desc dma mode
2024-03-20 21:54:43 +08:00
sakumisu
235139ad77
dwc2:simplify chan irq code
2024-03-20 21:53:49 +08:00
sakumisu
b2af686e67
dwc2:change dma incr to 16, flush fifo after fifo config
2024-03-20 21:53:22 +08:00
sakumisu
15b97f3348
ehci:fix missing bus param
2024-03-20 21:52:04 +08:00
sakumisu
b628c737ec
add esp dwc2 glue
2024-03-17 22:48:35 +08:00
Zhihong Chen
4c062d4442
port: HPMicro: update usb_dc_hpm.c
...
- support usbd_execute_test_mode() API
- interrupt should be check dtd active status
- update usbd_ep_open() time sequence
- change irq return to break
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-03-13 19:25:07 +08:00
Zhihong Chen
9e9772fde7
HPMicro: port: fix usbd_ep_close() not reset ep_enable flag
...
- fix usbd_ep_close() not reset ep_enable flag
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-03-04 22:00:21 +08:00
sakumisu
850e96577c
fix missing bus in sunxi
2024-03-02 13:14:58 +08:00
sakumisu
9e0cc8347c
align for some buffers
2024-02-24 16:38:57 +08:00
sakumisu
8c72947794
fix bl glue
2024-02-24 16:34:43 +08:00
Zhihong Chen
b4e952b371
port: HPMicro: call suspend/connect/disconnect event
...
- call suspend/connect/disconnect event
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-23 16:55:58 +08:00
Zhihong Chen
743669861e
port: HPMicro: fix transfer_len not reset
...
- fix transfer_len not reset
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-20 22:10:56 +08:00
Zhihong Chen
0e3e9477cc
port: HPMicro: decoupling the relationship between busid and usbid
...
- decoupling the relationship between busid and usbid
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-20 14:28:10 +08:00
Zhihong Chen
556fd6af63
HPMicro: port: fix _dcd_data align to 2048
...
- fix _dcd_data align to 2048
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-02-19 20:19:48 +08:00
sakumisu
e0551b3e7b
config busid and regbase in usbh_initialize and usbd_initialize
2024-02-18 21:15:04 +08:00
sakumisu
4313a2666e
check if device is on extern hub
2024-02-09 12:35:44 +08:00
sakumisu
e34ecc6cbb
add volatile for HcEpType & ChannelEna
2024-02-07 21:37:17 +08:00
sakumisu
d1c7fa8c19
support multi port api for device
2024-02-06 19:52:22 +08:00
sakumisu
6b0a0135ac
remove ununsed macro
2024-01-23 07:39:41 +08:00
sakumisu
04a300d803
remove ununsed header
2024-01-19 23:08:04 +08:00
Zhihong Chen
c4a65146e8
port: hpmicro: fix usb_dc_deinit()
...
- fix usb_dc_deinit()
Signed-off-by: Zhihong Chen <zhihong.chen@hpmicro.com >
2024-01-14 17:00:40 +08:00
sakumisu
125aad65d6
dwc2 use fifo not dma as default because users may have problems in cache
2024-01-13 00:22:03 +08:00
sakumisu
eff338f8a7
add ehci hccr offset macro
2024-01-09 20:59:04 +08:00
sakumisu
1158fc3d8c
support multi USB IP for host
2024-01-08 22:47:28 +08:00
sakumisu
d517f2594e
fix macro name
2024-01-06 17:47:22 +08:00
sakumisu
5fe66b4f0d
dwc2: ctrl and bulk no need nak irq, when intr calls nak, retry by user
2024-01-06 01:09:55 +08:00
sakumisu
cbfac7ec0c
dwc2 low level deinit after usb register reset
2024-01-06 01:07:39 +08:00
sakumisu
e58a78c070
add aic & intel ehci glue, add rtems osal
2023-12-30 15:01:20 +08:00
sakumisu
1492b8cca9
remove ch32 host, nrf5x, rp2040 port
2023-12-30 14:44:52 +08:00
sakumisu
67a3bbe02e
fix hctsiz macro name
2023-12-30 14:39:34 +08:00
sakumisu
65b2de960b
update gccfg for stm32h7/f7
2023-12-30 14:39:26 +08:00
sakumisu
019c9cff6e
fix dwc2 out chan actual len
2023-12-28 20:57:50 +08:00
sakumisu
d30d08ca3a
musb do not use alloc pipe
2023-12-26 22:52:32 +08:00
sakumisu
8cd31e6be0
add check for dwc2 ramsize and ep num
2023-12-26 20:11:23 +08:00
sakumisu
f68a86ea89
add usbh_deinitialize api
2023-12-24 23:37:47 +08:00
sakumisu
8a831cdaa5
user must define some configs in usb_config.h when use fsdev/musb/dwc2
2023-12-21 21:58:08 +08:00
sakumisu
bb709437aa
fix musb submit_urb by 5bbe2a97
2023-12-18 20:52:07 +08:00
sakumisu
29d45ef5c7
replace struct usbd_endpoint_cfg with struct usb_endpoint_descriptor in usbh_ep_open api
2023-12-10 22:34:01 +08:00
