yemai/CherryUSB
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

calssify stm32 device and host demo

Browse Source
This commit is contained in:
sakumisu
2022-01-29 23:17:16 +08:00
committed by sakimusu
parent aaee8a840b
commit d7e15269f2
76 changed files with 135824 additions and 43 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26573
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h750xx.h Normal file
View File

File diff suppressed because it is too large Load Diff

243
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h Normal file
View File

@@ -0,0 +1,243 @@
/**
******************************************************************************
* @file stm32h7xx.h
* @author MCD Application Team
* @brief CMSIS STM32H7xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32H7xx device used in the target application
* - To use or not the peripheral’s drivers in application code(i.e.
* code will be based on direct access to peripheral’s registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32h7xx
* @{
*/
#ifndef STM32H7xx_H
#define STM32H7xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32H7)
#define STM32H7
#endif /* STM32H7 */
/* Uncomment the line below according to the target STM32H7 device used in your
application
*/
#if !defined (STM32H743xx) && !defined (STM32H753xx) && !defined (STM32H750xx) && !defined (STM32H742xx) && \
!defined (STM32H745xx) && !defined (STM32H755xx) && !defined (STM32H747xx) && !defined (STM32H757xx) && \
!defined (STM32H7A3xx) && !defined (STM32H7A3xxQ) && !defined (STM32H7B3xx) && !defined (STM32H7B3xxQ) && !defined (STM32H7B0xx) && !defined (STM32H7B0xxQ) && \
!defined (STM32H735xx) && !defined (STM32H733xx) && !defined (STM32H730xx) && !defined (STM32H730xxQ) && !defined (STM32H725xx) && !defined (STM32H723xx)
/* #define STM32H742xx */ /*!< STM32H742VI, STM32H742ZI, STM32H742AI, STM32H742II, STM32H742BI, STM32H742XI Devices */
/* #define STM32H743xx */ /*!< STM32H743VI, STM32H743ZI, STM32H743AI, STM32H743II, STM32H743BI, STM32H743XI Devices */
/* #define STM32H753xx */ /*!< STM32H753VI, STM32H753ZI, STM32H753AI, STM32H753II, STM32H753BI, STM32H753XI Devices */
/* #define STM32H750xx */ /*!< STM32H750V, STM32H750I, STM32H750X Devices */
/* #define STM32H747xx */ /*!< STM32H747ZI, STM32H747AI, STM32H747II, STM32H747BI, STM32H747XI Devices */
/* #define STM32H757xx */ /*!< STM32H757ZI, STM32H757AI, STM32H757II, STM32H757BI, STM32H757XI Devices */
/* #define STM32H745xx */ /*!< STM32H745ZI, STM32H745II, STM32H745BI, STM32H745XI Devices */
/* #define STM32H755xx */ /*!< STM32H755ZI, STM32H755II, STM32H755BI, STM32H755XI Devices */
/* #define STM32H7B0xx */ /*!< STM32H7B0ABIxQ, STM32H7B0IBTx, STM32H7B0RBTx, STM32H7B0VBTx, STM32H7B0ZBTx, STM32H7B0IBKxQ */
/* #define STM32H7A3xx */ /*!< STM32H7A3IIK6, STM32H7A3IIT6, STM32H7A3NIH6, STM32H7A3RIT6, STM32H7A3VIH6, STM32H7A3VIT6, STM32H7A3ZIT6 */
/* #define STM32H7A3xxQ */ /*!< STM32H7A3QIY6Q, STM32H7A3IIK6Q, STM32H7A3IIT6Q, STM32H7A3LIH6Q, STM32H7A3VIH6Q, STM32H7A3VIT6Q, STM32H7A3AII6Q, STM32H7A3ZIT6Q */
/* #define STM32H7B3xx */ /*!< STM32H7B3IIK6, STM32H7B3IIT6, STM32H7B3NIH6, STM32H7B3RIT6, STM32H7B3VIH6, STM32H7B3VIT6, STM32H7B3ZIT6 */
/* #define STM32H7B3xxQ */ /*!< STM32H7B3QIY6Q, STM32H7B3IIK6Q, STM32H7B3IIT6Q, STM32H7B3LIH6Q, STM32H7B3VIH6Q, STM32H7B3VIT6Q, STM32H7B3AII6Q, STM32H7B3ZIT6Q */
/* #define STM32H735xx */ /*!< STM32H735AGI6, STM32H735IGK6, STM32H735RGV6, STM32H735VGT6, STM32H735VGY6, STM32H735ZGT6 Devices */
/* #define STM32H733xx */ /*!< STM32H733VGH6, STM32H733VGT6, STM32H733ZGI6, STM32H733ZGT6, Devices */
/* #define STM32H730xx */ /*!< STM32H730VBH6, STM32H730VBT6, STM32H730ZBT6, STM32H730ZBI6 Devices */
/* #define STM32H730xxQ */ /*!< STM32H730IBT6Q, STM32H730ABI6Q, STM32H730IBK6Q Devices */
/* #define STM32H725xx */ /*!< STM32H725AGI6, STM32H725IGK6, STM32H725IGT6, STM32H725RGV6, STM32H725VGT6, STM32H725VGY6, STM32H725ZGT6, STM32H725REV6, SM32H725VET6, STM32H725ZET6, STM32H725AEI6, STM32H725IET6, STM32H725IEK6 Devices */
/* #define STM32H723xx */ /*!< STM32H723VGH6, STM32H723VGT6, STM32H723ZGI6, STM32H723ZGT6, STM32H723VET6, STM32H723VEH6, STM32H723ZET6, STM32H723ZEI6 Devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if defined(DUAL_CORE) && !defined(CORE_CM4) && !defined(CORE_CM7)
#error "Dual core device, please select CORE_CM4 or CORE_CM7"
#endif
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number V1.9.0
*/
#define __STM32H7xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB1 (0x09) /*!< [23:16] sub1 version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __STM32H7xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32H7xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
|(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
|(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
|(__CMSIS_DEVICE_HAL_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32H743xx)
#include "stm32h743xx.h"
#elif defined(STM32H753xx)
#include "stm32h753xx.h"
#elif defined(STM32H750xx)
#include "stm32h750xx.h"
#elif defined(STM32H742xx)
#include "stm32h742xx.h"
#elif defined(STM32H745xx)
#include "stm32h745xx.h"
#elif defined(STM32H755xx)
#include "stm32h755xx.h"
#elif defined(STM32H747xx)
#include "stm32h747xx.h"
#elif defined(STM32H757xx)
#include "stm32h757xx.h"
#elif defined(STM32H7B0xx)
#include "stm32h7b0xx.h"
#elif defined(STM32H7B0xxQ)
#include "stm32h7b0xxq.h"
#elif defined(STM32H7A3xx)
#include "stm32h7a3xx.h"
#elif defined(STM32H7B3xx)
#include "stm32h7b3xx.h"
#elif defined(STM32H7A3xxQ)
#include "stm32h7a3xxq.h"
#elif defined(STM32H7B3xxQ)
#include "stm32h7b3xxq.h"
#elif defined(STM32H735xx)
#include "stm32h735xx.h"
#elif defined(STM32H733xx)
#include "stm32h733xx.h"
#elif defined(STM32H730xx)
#include "stm32h730xx.h"
#elif defined(STM32H730xxQ)
#include "stm32h730xxq.h"
#elif defined(STM32H725xx)
#include "stm32h725xx.h"
#elif defined(STM32H723xx)
#include "stm32h723xx.h"
#else
#error "Please select first the target STM32H7xx device used in your application (in stm32h7xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
SUCCESS = 0,
ERROR = !SUCCESS
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32h7xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* STM32H7xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

105
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Device/ST/STM32H7xx/Include/system_stm32h7xx.h Normal file
View File

@@ -0,0 +1,105 @@
/**
******************************************************************************
* @file system_stm32h7xx.h
* @author MCD Application Team
* @brief CMSIS Cortex-Mx Device System Source File for STM32H7xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32h7xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef SYSTEM_STM32H7XX_H
#define SYSTEM_STM32H7XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32H7xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32H7xx_System_Exported_types
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Domain1 Clock Frequency */
extern uint32_t SystemD2Clock; /*!< System Domain2 Clock Frequency */
extern const uint8_t D1CorePrescTable[16] ; /*!< D1CorePrescTable prescalers table values */
/**
* @}
*/
/** @addtogroup STM32H7xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32H7xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32H7xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* SYSTEM_STM32H7XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

865
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/cmsis_armcc.h Normal file
View File

@@ -0,0 +1,865 @@
/**************************************************************************//**
* @file cmsis_armcc.h
* @brief CMSIS compiler ARMCC (Arm Compiler 5) header file
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_ARMCC_H
#define __CMSIS_ARMCC_H
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
#error "Please use Arm Compiler Toolchain V4.0.677 or later!"
#endif
/* CMSIS compiler control architecture macros */
#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \
(defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) )
#define __ARM_ARCH_6M__ 1
#endif
#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1))
#define __ARM_ARCH_7M__ 1
#endif
#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
#define __ARM_ARCH_7EM__ 1
#endif
/* __ARM_ARCH_8M_BASE__ not applicable */
/* __ARM_ARCH_8M_MAIN__ not applicable */
/* CMSIS compiler specific defines */
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE __inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static __inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE static __forceinline
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __declspec(noreturn)
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT __packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION __packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
#define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x)))
#endif
#ifndef __UNALIGNED_UINT16_WRITE
#define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
#define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr)))
#endif
#ifndef __UNALIGNED_UINT32_WRITE
#define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
#define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr)))
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#define __RESTRICT __restrict
#endif
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/**
\brief Enable IRQ Interrupts
\details Enables IRQ interrupts by clearing the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
/* intrinsic void __enable_irq(); */
/**
\brief Disable IRQ Interrupts
\details Disables IRQ interrupts by setting the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
/* intrinsic void __disable_irq(); */
/**
\brief Get Control Register
\details Returns the content of the Control Register.
\return Control Register value
*/
__STATIC_INLINE uint32_t __get_CONTROL(void)
{
register uint32_t __regControl __ASM("control");
return(__regControl);
}
/**
\brief Set Control Register
\details Writes the given value to the Control Register.
\param [in] control Control Register value to set
*/
__STATIC_INLINE void __set_CONTROL(uint32_t control)
{
register uint32_t __regControl __ASM("control");
__regControl = control;
}
/**
\brief Get IPSR Register
\details Returns the content of the IPSR Register.
\return IPSR Register value
*/
__STATIC_INLINE uint32_t __get_IPSR(void)
{
register uint32_t __regIPSR __ASM("ipsr");
return(__regIPSR);
}
/**
\brief Get APSR Register
\details Returns the content of the APSR Register.
\return APSR Register value
*/
__STATIC_INLINE uint32_t __get_APSR(void)
{
register uint32_t __regAPSR __ASM("apsr");
return(__regAPSR);
}
/**
\brief Get xPSR Register
\details Returns the content of the xPSR Register.
\return xPSR Register value
*/
__STATIC_INLINE uint32_t __get_xPSR(void)
{
register uint32_t __regXPSR __ASM("xpsr");
return(__regXPSR);
}
/**
\brief Get Process Stack Pointer
\details Returns the current value of the Process Stack Pointer (PSP).
\return PSP Register value
*/
__STATIC_INLINE uint32_t __get_PSP(void)
{
register uint32_t __regProcessStackPointer __ASM("psp");
return(__regProcessStackPointer);
}
/**
\brief Set Process Stack Pointer
\details Assigns the given value to the Process Stack Pointer (PSP).
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
{
register uint32_t __regProcessStackPointer __ASM("psp");
__regProcessStackPointer = topOfProcStack;
}
/**
\brief Get Main Stack Pointer
\details Returns the current value of the Main Stack Pointer (MSP).
\return MSP Register value
*/
__STATIC_INLINE uint32_t __get_MSP(void)
{
register uint32_t __regMainStackPointer __ASM("msp");
return(__regMainStackPointer);
}
/**
\brief Set Main Stack Pointer
\details Assigns the given value to the Main Stack Pointer (MSP).
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
{
register uint32_t __regMainStackPointer __ASM("msp");
__regMainStackPointer = topOfMainStack;
}
/**
\brief Get Priority Mask
\details Returns the current state of the priority mask bit from the Priority Mask Register.
\return Priority Mask value
*/
__STATIC_INLINE uint32_t __get_PRIMASK(void)
{
register uint32_t __regPriMask __ASM("primask");
return(__regPriMask);
}
/**
\brief Set Priority Mask
\details Assigns the given value to the Priority Mask Register.
\param [in] priMask Priority Mask
*/
__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
{
register uint32_t __regPriMask __ASM("primask");
__regPriMask = (priMask);
}
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
/**
\brief Enable FIQ
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __enable_fault_irq __enable_fiq
/**
\brief Disable FIQ
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __disable_fault_irq __disable_fiq
/**
\brief Get Base Priority
\details Returns the current value of the Base Priority register.
\return Base Priority register value
*/
__STATIC_INLINE uint32_t __get_BASEPRI(void)
{
register uint32_t __regBasePri __ASM("basepri");
return(__regBasePri);
}
/**
\brief Set Base Priority
\details Assigns the given value to the Base Priority register.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
{
register uint32_t __regBasePri __ASM("basepri");
__regBasePri = (basePri & 0xFFU);
}
/**
\brief Set Base Priority with condition
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
{
register uint32_t __regBasePriMax __ASM("basepri_max");
__regBasePriMax = (basePri & 0xFFU);
}
/**
\brief Get Fault Mask
\details Returns the current value of the Fault Mask register.
\return Fault Mask register value
*/
__STATIC_INLINE uint32_t __get_FAULTMASK(void)
{
register uint32_t __regFaultMask __ASM("faultmask");
return(__regFaultMask);
}
/**
\brief Set Fault Mask
\details Assigns the given value to the Fault Mask register.
\param [in] faultMask Fault Mask value to set
*/
__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
{
register uint32_t __regFaultMask __ASM("faultmask");
__regFaultMask = (faultMask & (uint32_t)1U);
}
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/**
\brief Get FPSCR
\details Returns the current value of the Floating Point Status/Control register.
\return Floating Point Status/Control register value
*/
__STATIC_INLINE uint32_t __get_FPSCR(void)
{
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
register uint32_t __regfpscr __ASM("fpscr");
return(__regfpscr);
#else
return(0U);
#endif
}
/**
\brief Set FPSCR
\details Assigns the given value to the Floating Point Status/Control register.
\param [in] fpscr Floating Point Status/Control value to set
*/
__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
{
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
register uint32_t __regfpscr __ASM("fpscr");
__regfpscr = (fpscr);
#else
(void)fpscr;
#endif
}
/*@} end of CMSIS_Core_RegAccFunctions */
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/**
\brief No Operation
\details No Operation does nothing. This instruction can be used for code alignment purposes.
*/
#define __NOP __nop
/**
\brief Wait For Interrupt
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
*/
#define __WFI __wfi
/**
\brief Wait For Event
\details Wait For Event is a hint instruction that permits the processor to enter
a low-power state until one of a number of events occurs.
*/
#define __WFE __wfe
/**
\brief Send Event
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
*/
#define __SEV __sev
/**
\brief Instruction Synchronization Barrier
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or memory,
after the instruction has been completed.
*/
#define __ISB() do {\
__schedule_barrier();\
__isb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Synchronization Barrier
\details Acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
#define __DSB() do {\
__schedule_barrier();\
__dsb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Memory Barrier
\details Ensures the apparent order of the explicit memory operations before
and after the instruction, without ensuring their completion.
*/
#define __DMB() do {\
__schedule_barrier();\
__dmb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Reverse byte order (32 bit)
\details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
\param [in] value Value to reverse
\return Reversed value
*/
#define __REV __rev
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
{
rev16 r0, r0
bx lr
}
#endif
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#endif
/**
\brief Rotate Right in unsigned value (32 bit)
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
\param [in] op1 Value to rotate
\param [in] op2 Number of Bits to rotate
\return Rotated value
*/
#define __ROR __ror
/**
\brief Breakpoint
\details Causes the processor to enter Debug state.
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
\param [in] value is ignored by the processor.
If required, a debugger can use it to store additional information about the breakpoint.
*/
#define __BKPT(value) __breakpoint(value)
/**
\brief Reverse bit order of value
\details Reverses the bit order of the given value.
\param [in] value Value to reverse
\return Reversed value
*/
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __RBIT __rbit
#else
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result;
uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
result = value; /* r will be reversed bits of v; first get LSB of v */
for (value >>= 1U; value != 0U; value >>= 1U)
{
result <<= 1U;
result |= value & 1U;
s--;
}
result <<= s; /* shift when v's highest bits are zero */
return result;
}
#endif
/**
\brief Count leading zeros
\details Counts the number of leading zeros of a data value.
\param [in] value Value to count the leading zeros
\return number of leading zeros in value
*/
#define __CLZ __clz
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
/**
\brief LDR Exclusive (8 bit)
\details Executes a exclusive LDR instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
#else
#define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (16 bit)
\details Executes a exclusive LDR instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
#else
#define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (32 bit)
\details Executes a exclusive LDR instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
#else
#define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief STR Exclusive (8 bit)
\details Executes a exclusive STR instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXB(value, ptr) __strex(value, ptr)
#else
#define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (16 bit)
\details Executes a exclusive STR instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXH(value, ptr) __strex(value, ptr)
#else
#define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (32 bit)
\details Executes a exclusive STR instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXW(value, ptr) __strex(value, ptr)
#else
#define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief Remove the exclusive lock
\details Removes the exclusive lock which is created by LDREX.
*/
#define __CLREX __clrex
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
#define __SSAT __ssat
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
#define __USAT __usat
/**
\brief Rotate Right with Extend (32 bit)
\details Moves each bit of a bitstring right by one bit.
The carry input is shifted in at the left end of the bitstring.
\param [in] value Value to rotate
\return Rotated value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
{
rrx r0, r0
bx lr
}
#endif
/**
\brief LDRT Unprivileged (8 bit)
\details Executes a Unprivileged LDRT instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
/**
\brief LDRT Unprivileged (16 bit)
\details Executes a Unprivileged LDRT instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
/**
\brief LDRT Unprivileged (32 bit)
\details Executes a Unprivileged LDRT instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
/**
\brief STRT Unprivileged (8 bit)
\details Executes a Unprivileged STRT instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRBT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (16 bit)
\details Executes a Unprivileged STRT instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRHT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (32 bit)
\details Executes a Unprivileged STRT instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRT(value, ptr) __strt(value, ptr)
#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
{
if ((sat >= 1U) && (sat <= 32U))
{
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
const int32_t min = -1 - max ;
if (val > max)
{
return max;
}
else if (val < min)
{
return min;
}
}
return val;
}
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
{
if (sat <= 31U)
{
const uint32_t max = ((1U << sat) - 1U);
if (val > (int32_t)max)
{
return max;
}
else if (val < 0)
{
return 0U;
}
}
return (uint32_t)val;
}
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __SADD8 __sadd8
#define __QADD8 __qadd8
#define __SHADD8 __shadd8
#define __UADD8 __uadd8
#define __UQADD8 __uqadd8
#define __UHADD8 __uhadd8
#define __SSUB8 __ssub8
#define __QSUB8 __qsub8
#define __SHSUB8 __shsub8
#define __USUB8 __usub8
#define __UQSUB8 __uqsub8
#define __UHSUB8 __uhsub8
#define __SADD16 __sadd16
#define __QADD16 __qadd16
#define __SHADD16 __shadd16
#define __UADD16 __uadd16
#define __UQADD16 __uqadd16
#define __UHADD16 __uhadd16
#define __SSUB16 __ssub16
#define __QSUB16 __qsub16
#define __SHSUB16 __shsub16
#define __USUB16 __usub16
#define __UQSUB16 __uqsub16
#define __UHSUB16 __uhsub16
#define __SASX __sasx
#define __QASX __qasx
#define __SHASX __shasx
#define __UASX __uasx
#define __UQASX __uqasx
#define __UHASX __uhasx
#define __SSAX __ssax
#define __QSAX __qsax
#define __SHSAX __shsax
#define __USAX __usax
#define __UQSAX __uqsax
#define __UHSAX __uhsax
#define __USAD8 __usad8
#define __USADA8 __usada8
#define __SSAT16 __ssat16
#define __USAT16 __usat16
#define __UXTB16 __uxtb16
#define __UXTAB16 __uxtab16
#define __SXTB16 __sxtb16
#define __SXTAB16 __sxtab16
#define __SMUAD __smuad
#define __SMUADX __smuadx
#define __SMLAD __smlad
#define __SMLADX __smladx
#define __SMLALD __smlald
#define __SMLALDX __smlaldx
#define __SMUSD __smusd
#define __SMUSDX __smusdx
#define __SMLSD __smlsd
#define __SMLSDX __smlsdx
#define __SMLSLD __smlsld
#define __SMLSLDX __smlsldx
#define __SEL __sel
#define __QADD __qadd
#define __QSUB __qsub
#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
((int64_t)(ARG3) << 32U) ) >> 32U))
#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/*@} end of group CMSIS_SIMD_intrinsics */
#endif /* __CMSIS_ARMCC_H */

1869
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/cmsis_armclang.h Normal file
View File

File diff suppressed because it is too large Load Diff

266
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/cmsis_compiler.h Normal file
View File

@@ -0,0 +1,266 @@
/**************************************************************************//**
* @file cmsis_compiler.h
* @brief CMSIS compiler generic header file
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_COMPILER_H
#define __CMSIS_COMPILER_H
#include <stdint.h>
/*
* Arm Compiler 4/5
*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*
* Arm Compiler 6 (armclang)
*/
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#include "cmsis_armclang.h"
/*
* GNU Compiler
*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*
* IAR Compiler
*/
#elif defined ( __ICCARM__ )
#include <cmsis_iccarm.h>
/*
* TI Arm Compiler
*/
#elif defined ( __TI_ARM__ )
#include <cmsis_ccs.h>
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __attribute__((packed))
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __attribute__((packed))
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
/*
* TASKING Compiler
*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __packed__
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __packed__
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __packed__
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __packed__ T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __align(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
/*
* COSMIC Compiler
*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#ifndef __ASM
#define __ASM _asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
// NO RETURN is automatically detected hence no warning here
#define __NO_RETURN
#endif
#ifndef __USED
#warning No compiler specific solution for __USED. __USED is ignored.
#define __USED
#endif
#ifndef __WEAK
#define __WEAK __weak
#endif
#ifndef __PACKED
#define __PACKED @packed
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT @packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION @packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
@packed struct T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
#else
#error Unknown compiler.
#endif
#endif /* __CMSIS_COMPILER_H */

2085
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/cmsis_gcc.h Normal file
View File

File diff suppressed because it is too large Load Diff

935
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/cmsis_iccarm.h Normal file
View File

@@ -0,0 +1,935 @@
/**************************************************************************//**
* @file cmsis_iccarm.h
* @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file
* @version V5.0.7
* @date 19. June 2018
******************************************************************************/
//------------------------------------------------------------------------------
//
// Copyright (c) 2017-2018 IAR Systems
//
// Licensed under the Apache License, Version 2.0 (the "License")
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
//------------------------------------------------------------------------------
#ifndef __CMSIS_ICCARM_H__
#define __CMSIS_ICCARM_H__
#ifndef __ICCARM__
#error This file should only be compiled by ICCARM
#endif
#pragma system_include
#define __IAR_FT _Pragma("inline=forced") __intrinsic
#if (__VER__ >= 8000000)
#define __ICCARM_V8 1
#else
#define __ICCARM_V8 0
#endif
#ifndef __ALIGNED
#if __ICCARM_V8
#define __ALIGNED(x) __attribute__((aligned(x)))
#elif (__VER__ >= 7080000)
/* Needs IAR language extensions */
#define __ALIGNED(x) __attribute__((aligned(x)))
#else
#warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#endif
/* Define compiler macros for CPU architecture, used in CMSIS 5.
*/
#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
/* Macros already defined */
#else
#if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#elif defined(__ARM8M_BASELINE__)
#define __ARM_ARCH_8M_BASE__ 1
#elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
#if __ARM_ARCH == 6
#define __ARM_ARCH_6M__ 1
#elif __ARM_ARCH == 7
#if __ARM_FEATURE_DSP
#define __ARM_ARCH_7EM__ 1
#else
#define __ARM_ARCH_7M__ 1
#endif
#endif /* __ARM_ARCH */
#endif /* __ARM_ARCH_PROFILE == 'M' */
#endif
/* Alternativ core deduction for older ICCARM's */
#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
!defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
#if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
#define __ARM_ARCH_6M__ 1
#elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
#define __ARM_ARCH_7M__ 1
#elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
#define __ARM_ARCH_7EM__ 1
#elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
#define __ARM_ARCH_8M_BASE__ 1
#elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#else
#error "Unknown target."
#endif
#endif
#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
#define __IAR_M0_FAMILY 1
#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
#define __IAR_M0_FAMILY 1
#else
#define __IAR_M0_FAMILY 0
#endif
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __NO_RETURN
#if __ICCARM_V8
#define __NO_RETURN __attribute__((__noreturn__))
#else
#define __NO_RETURN _Pragma("object_attribute=__noreturn")
#endif
#endif
#ifndef __PACKED
#if __ICCARM_V8
#define __PACKED __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED __packed
#endif
#endif
#ifndef __PACKED_STRUCT
#if __ICCARM_V8
#define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED_STRUCT __packed struct
#endif
#endif
#ifndef __PACKED_UNION
#if __ICCARM_V8
#define __PACKED_UNION union __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED_UNION __packed union
#endif
#endif
#ifndef __RESTRICT
#define __RESTRICT __restrict
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __FORCEINLINE
#define __FORCEINLINE _Pragma("inline=forced")
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE
#endif
#ifndef __UNALIGNED_UINT16_READ
#pragma language=save
#pragma language=extended
__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
{
return *(__packed uint16_t*)(ptr);
}
#pragma language=restore
#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
#pragma language=save
#pragma language=extended
__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
{
*(__packed uint16_t*)(ptr) = val;;
}
#pragma language=restore
#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
#endif
#ifndef __UNALIGNED_UINT32_READ
#pragma language=save
#pragma language=extended
__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
{
return *(__packed uint32_t*)(ptr);
}
#pragma language=restore
#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
#pragma language=save
#pragma language=extended
__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
{
*(__packed uint32_t*)(ptr) = val;;
}
#pragma language=restore
#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
#pragma language=save
#pragma language=extended
__packed struct __iar_u32 { uint32_t v; };
#pragma language=restore
#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
#endif
#ifndef __USED
#if __ICCARM_V8
#define __USED __attribute__((used))
#else
#define __USED _Pragma("__root")
#endif
#endif
#ifndef __WEAK
#if __ICCARM_V8
#define __WEAK __attribute__((weak))
#else
#define __WEAK _Pragma("__weak")
#endif
#endif
#ifndef __ICCARM_INTRINSICS_VERSION__
#define __ICCARM_INTRINSICS_VERSION__ 0
#endif
#if __ICCARM_INTRINSICS_VERSION__ == 2
#if defined(__CLZ)
#undef __CLZ
#endif
#if defined(__REVSH)
#undef __REVSH
#endif
#if defined(__RBIT)
#undef __RBIT
#endif
#if defined(__SSAT)
#undef __SSAT
#endif
#if defined(__USAT)
#undef __USAT
#endif
#include "iccarm_builtin.h"
#define __disable_fault_irq __iar_builtin_disable_fiq
#define __disable_irq __iar_builtin_disable_interrupt
#define __enable_fault_irq __iar_builtin_enable_fiq
#define __enable_irq __iar_builtin_enable_interrupt
#define __arm_rsr __iar_builtin_rsr
#define __arm_wsr __iar_builtin_wsr
#define __get_APSR() (__arm_rsr("APSR"))
#define __get_BASEPRI() (__arm_rsr("BASEPRI"))
#define __get_CONTROL() (__arm_rsr("CONTROL"))
#define __get_FAULTMASK() (__arm_rsr("FAULTMASK"))
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
#define __get_FPSCR() (__arm_rsr("FPSCR"))
#define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE)))
#else
#define __get_FPSCR() ( 0 )
#define __set_FPSCR(VALUE) ((void)VALUE)
#endif
#define __get_IPSR() (__arm_rsr("IPSR"))
#define __get_MSP() (__arm_rsr("MSP"))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
#define __get_MSPLIM() (0U)
#else
#define __get_MSPLIM() (__arm_rsr("MSPLIM"))
#endif
#define __get_PRIMASK() (__arm_rsr("PRIMASK"))
#define __get_PSP() (__arm_rsr("PSP"))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __get_PSPLIM() (0U)
#else
#define __get_PSPLIM() (__arm_rsr("PSPLIM"))
#endif
#define __get_xPSR() (__arm_rsr("xPSR"))
#define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE)))
#define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE)))
#define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE)))
#define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE)))
#define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
#define __set_MSPLIM(VALUE) ((void)(VALUE))
#else
#define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE)))
#endif
#define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE)))
#define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __set_PSPLIM(VALUE) ((void)(VALUE))
#else
#define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE)))
#endif
#define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS"))
#define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE)))
#define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS"))
#define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE)))
#define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS"))
#define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE)))
#define __TZ_get_SP_NS() (__arm_rsr("SP_NS"))
#define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE)))
#define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS"))
#define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE)))
#define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS"))
#define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE)))
#define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS"))
#define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __TZ_get_PSPLIM_NS() (0U)
#define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
#else
#define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS"))
#define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
#endif
#define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS"))
#define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE)))
#define __NOP __iar_builtin_no_operation
#define __CLZ __iar_builtin_CLZ
#define __CLREX __iar_builtin_CLREX
#define __DMB __iar_builtin_DMB
#define __DSB __iar_builtin_DSB
#define __ISB __iar_builtin_ISB
#define __LDREXB __iar_builtin_LDREXB
#define __LDREXH __iar_builtin_LDREXH
#define __LDREXW __iar_builtin_LDREX
#define __RBIT __iar_builtin_RBIT
#define __REV __iar_builtin_REV
#define __REV16 __iar_builtin_REV16
__IAR_FT int16_t __REVSH(int16_t val)
{
return (int16_t) __iar_builtin_REVSH(val);
}
#define __ROR __iar_builtin_ROR
#define __RRX __iar_builtin_RRX
#define __SEV __iar_builtin_SEV
#if !__IAR_M0_FAMILY
#define __SSAT __iar_builtin_SSAT
#endif
#define __STREXB __iar_builtin_STREXB
#define __STREXH __iar_builtin_STREXH
#define __STREXW __iar_builtin_STREX
#if !__IAR_M0_FAMILY
#define __USAT __iar_builtin_USAT
#endif
#define __WFE __iar_builtin_WFE
#define __WFI __iar_builtin_WFI
#if __ARM_MEDIA__
#define __SADD8 __iar_builtin_SADD8
#define __QADD8 __iar_builtin_QADD8
#define __SHADD8 __iar_builtin_SHADD8
#define __UADD8 __iar_builtin_UADD8
#define __UQADD8 __iar_builtin_UQADD8
#define __UHADD8 __iar_builtin_UHADD8
#define __SSUB8 __iar_builtin_SSUB8
#define __QSUB8 __iar_builtin_QSUB8
#define __SHSUB8 __iar_builtin_SHSUB8
#define __USUB8 __iar_builtin_USUB8
#define __UQSUB8 __iar_builtin_UQSUB8
#define __UHSUB8 __iar_builtin_UHSUB8
#define __SADD16 __iar_builtin_SADD16
#define __QADD16 __iar_builtin_QADD16
#define __SHADD16 __iar_builtin_SHADD16
#define __UADD16 __iar_builtin_UADD16
#define __UQADD16 __iar_builtin_UQADD16
#define __UHADD16 __iar_builtin_UHADD16
#define __SSUB16 __iar_builtin_SSUB16
#define __QSUB16 __iar_builtin_QSUB16
#define __SHSUB16 __iar_builtin_SHSUB16
#define __USUB16 __iar_builtin_USUB16
#define __UQSUB16 __iar_builtin_UQSUB16
#define __UHSUB16 __iar_builtin_UHSUB16
#define __SASX __iar_builtin_SASX
#define __QASX __iar_builtin_QASX
#define __SHASX __iar_builtin_SHASX
#define __UASX __iar_builtin_UASX
#define __UQASX __iar_builtin_UQASX
#define __UHASX __iar_builtin_UHASX
#define __SSAX __iar_builtin_SSAX
#define __QSAX __iar_builtin_QSAX
#define __SHSAX __iar_builtin_SHSAX
#define __USAX __iar_builtin_USAX
#define __UQSAX __iar_builtin_UQSAX
#define __UHSAX __iar_builtin_UHSAX
#define __USAD8 __iar_builtin_USAD8
#define __USADA8 __iar_builtin_USADA8
#define __SSAT16 __iar_builtin_SSAT16
#define __USAT16 __iar_builtin_USAT16
#define __UXTB16 __iar_builtin_UXTB16
#define __UXTAB16 __iar_builtin_UXTAB16
#define __SXTB16 __iar_builtin_SXTB16
#define __SXTAB16 __iar_builtin_SXTAB16
#define __SMUAD __iar_builtin_SMUAD
#define __SMUADX __iar_builtin_SMUADX
#define __SMMLA __iar_builtin_SMMLA
#define __SMLAD __iar_builtin_SMLAD
#define __SMLADX __iar_builtin_SMLADX
#define __SMLALD __iar_builtin_SMLALD
#define __SMLALDX __iar_builtin_SMLALDX
#define __SMUSD __iar_builtin_SMUSD
#define __SMUSDX __iar_builtin_SMUSDX
#define __SMLSD __iar_builtin_SMLSD
#define __SMLSDX __iar_builtin_SMLSDX
#define __SMLSLD __iar_builtin_SMLSLD
#define __SMLSLDX __iar_builtin_SMLSLDX
#define __SEL __iar_builtin_SEL
#define __QADD __iar_builtin_QADD
#define __QSUB __iar_builtin_QSUB
#define __PKHBT __iar_builtin_PKHBT
#define __PKHTB __iar_builtin_PKHTB
#endif
#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
#if __IAR_M0_FAMILY
/* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
#define __CLZ __cmsis_iar_clz_not_active
#define __SSAT __cmsis_iar_ssat_not_active
#define __USAT __cmsis_iar_usat_not_active
#define __RBIT __cmsis_iar_rbit_not_active
#define __get_APSR __cmsis_iar_get_APSR_not_active
#endif
#if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) ))
#define __get_FPSCR __cmsis_iar_get_FPSR_not_active
#define __set_FPSCR __cmsis_iar_set_FPSR_not_active
#endif
#ifdef __INTRINSICS_INCLUDED
#error intrinsics.h is already included previously!
#endif
#include <intrinsics.h>
#if __IAR_M0_FAMILY
/* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
#undef __CLZ
#undef __SSAT
#undef __USAT
#undef __RBIT
#undef __get_APSR
__STATIC_INLINE uint8_t __CLZ(uint32_t data)
{
if (data == 0U) { return 32U; }
uint32_t count = 0U;
uint32_t mask = 0x80000000U;
while ((data & mask) == 0U)
{
count += 1U;
mask = mask >> 1U;
}
return count;
}
__STATIC_INLINE uint32_t __RBIT(uint32_t v)
{
uint8_t sc = 31U;
uint32_t r = v;
for (v >>= 1U; v; v >>= 1U)
{
r <<= 1U;
r |= v & 1U;
sc--;
}
return (r << sc);
}
__STATIC_INLINE uint32_t __get_APSR(void)
{
uint32_t res;
__asm("MRS %0,APSR" : "=r" (res));
return res;
}
#endif
#if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) ))
#undef __get_FPSCR
#undef __set_FPSCR
#define __get_FPSCR() (0)
#define __set_FPSCR(VALUE) ((void)VALUE)
#endif
#pragma diag_suppress=Pe940
#pragma diag_suppress=Pe177
#define __enable_irq __enable_interrupt
#define __disable_irq __disable_interrupt
#define __NOP __no_operation
#define __get_xPSR __get_PSR
#if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
__IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
{
return __LDREX((unsigned long *)ptr);
}
__IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
{
return __STREX(value, (unsigned long *)ptr);
}
#endif
/* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
#if (__CORTEX_M >= 0x03)
__IAR_FT uint32_t __RRX(uint32_t value)
{
uint32_t result;
__ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc");
return(result);
}
__IAR_FT void __set_BASEPRI_MAX(uint32_t value)
{
__asm volatile("MSR BASEPRI_MAX,%0"::"r" (value));
}
#define __enable_fault_irq __enable_fiq
#define __disable_fault_irq __disable_fiq
#endif /* (__CORTEX_M >= 0x03) */
__IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
{
return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
}
#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
(defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) )
__IAR_FT uint32_t __get_MSPLIM(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,MSPLIM" : "=r" (res));
#endif
return res;
}
__IAR_FT void __set_MSPLIM(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR MSPLIM,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __get_PSPLIM(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,PSPLIM" : "=r" (res));
#endif
return res;
}
__IAR_FT void __set_PSPLIM(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR PSPLIM,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,CONTROL_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_CONTROL_NS(uint32_t value)
{
__asm volatile("MSR CONTROL_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PSP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,PSP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_PSP_NS(uint32_t value)
{
__asm volatile("MSR PSP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_MSP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,MSP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_MSP_NS(uint32_t value)
{
__asm volatile("MSR MSP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_SP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,SP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_SP_NS(uint32_t value)
{
__asm volatile("MSR SP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PRIMASK_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,PRIMASK_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value)
{
__asm volatile("MSR PRIMASK_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_BASEPRI_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,BASEPRI_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value)
{
__asm volatile("MSR BASEPRI_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value)
{
__asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PSPLIM_NS(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,PSPLIM_NS" : "=r" (res));
#endif
return res;
}
__IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR PSPLIM_NS,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __TZ_get_MSPLIM_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,MSPLIM_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value)
{
__asm volatile("MSR MSPLIM_NS,%0" :: "r" (value));
}
#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */
#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value))
#if __IAR_M0_FAMILY
__STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
{
if ((sat >= 1U) && (sat <= 32U))
{
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
const int32_t min = -1 - max ;
if (val > max)
{
return max;
}
else if (val < min)
{
return min;
}
}
return val;
}
__STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
{
if (sat <= 31U)
{
const uint32_t max = ((1U << sat) - 1U);
if (val > (int32_t)max)
{
return max;
}
else if (val < 0)
{
return 0U;
}
}
return (uint32_t)val;
}
#endif
#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
__IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
{
uint32_t res;
__ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
{
uint32_t res;
__ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
{
uint32_t res;
__ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return res;
}
__IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
{
__ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
}
__IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
{
__ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
}
__IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
{
__ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
}
#endif /* (__CORTEX_M >= 0x03) */
#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
(defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) )
__IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return res;
}
__IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
{
__ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
{
__ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
{
__ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return res;
}
__IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
__IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
__IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
#undef __IAR_FT
#undef __IAR_M0_FAMILY
#undef __ICCARM_V8
#pragma diag_default=Pe940
#pragma diag_default=Pe177
#endif /* __CMSIS_ICCARM_H__ */

39
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/cmsis_version.h Normal file
View File

@@ -0,0 +1,39 @@
/**************************************************************************//**
* @file cmsis_version.h
* @brief CMSIS Core(M) Version definitions
* @version V5.0.2
* @date 19. April 2017
******************************************************************************/
/*
* Copyright (c) 2009-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CMSIS_VERSION_H
#define __CMSIS_VERSION_H
/* CMSIS Version definitions */
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
#endif

1918
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_armv8mbl.h Normal file
View File

File diff suppressed because it is too large Load Diff

2927
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_armv8mml.h Normal file
View File

File diff suppressed because it is too large Load Diff

949
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm0.h Normal file
View File

@@ -0,0 +1,949 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
* @version V5.0.5
* @date 28. May 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M0
@{
*/
#include "cmsis_version.h"
/* CMSIS CM0 definitions */
#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
__CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
#define __CORTEX_M (0U) /*!< Cortex-M Core */
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TI_ARM__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM0_REV
#define __CM0_REV 0x0000U
#warning "__CM0_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M0 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Core Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
#ifdef CMSIS_NVIC_VIRTUAL
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
#endif
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
#define NVIC_EnableIRQ __NVIC_EnableIRQ
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
#define NVIC_DisableIRQ __NVIC_DisableIRQ
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */
#define NVIC_SetPriority __NVIC_SetPriority
#define NVIC_GetPriority __NVIC_GetPriority
#define NVIC_SystemReset __NVIC_SystemReset
#endif /* CMSIS_NVIC_VIRTUAL */
#ifdef CMSIS_VECTAB_VIRTUAL
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
#endif
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetVector __NVIC_SetVector
#define NVIC_GetVector __NVIC_GetVector
#endif /* (CMSIS_VECTAB_VIRTUAL) */
#define NVIC_USER_IRQ_OFFSET 16
/* The following EXC_RETURN values are saved the LR on exception entry */
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
/* Interrupt Priorities are WORD accessible only under Armv6-M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
#define __NVIC_SetPriorityGrouping(X) (void)(X)
#define __NVIC_GetPriorityGrouping() (0U)
/**
\brief Enable Interrupt
\details Enables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Get Interrupt Enable status
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt is not enabled.
\return 1 Interrupt is enabled.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Disable Interrupt
\details Disables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__DSB();
__ISB();
}
}
/**
\brief Get Pending Interrupt
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Set Interrupt Priority
\details Sets the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
\note The priority cannot be set for every processor exception.
*/
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief Encode Priority
\details Encodes the priority for an interrupt with the given priority group,
preemptive priority value, and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
\param [in] PriorityGroup Used priority group.
\param [in] PreemptPriority Preemptive priority value (starting from 0).
\param [in] SubPriority Subpriority value (starting from 0).
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
*/
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
return (
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
);
}
/**
\brief Decode Priority
\details Decodes an interrupt priority value with a given priority group to
preemptive priority value and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
\param [in] PriorityGroup Used priority group.
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
\param [out] pSubPriority Subpriority value (starting from 0).
*/
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
}
/**
\brief Set Interrupt Vector
\details Sets an interrupt vector in SRAM based interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
Address 0 must be mapped to SRAM.
\param [in] IRQn Interrupt number
\param [in] vector Address of interrupt handler function
*/
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
{
uint32_t *vectors = (uint32_t *)0x0U;
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
}
/**
\brief Get Interrupt Vector
\details Reads an interrupt vector from interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Address of interrupt handler function
*/
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
{
uint32_t *vectors = (uint32_t *)0x0U;
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ########################## FPU functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_FpuFunctions FPU Functions
\brief Function that provides FPU type.
@{
*/
/**
\brief get FPU type
\details returns the FPU type
\returns
- \b 0: No FPU
- \b 1: Single precision FPU
- \b 2: Double + Single precision FPU
*/
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
{
return 0U; /* No FPU */
}
/*@} end of CMSIS_Core_FpuFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */

1083
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm0plus.h Normal file
View File

File diff suppressed because it is too large Load Diff

976
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm1.h Normal file
View File

@@ -0,0 +1,976 @@
/**************************************************************************//**
* @file core_cm1.h
* @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File
* @version V1.0.0
* @date 23. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM1_H_GENERIC
#define __CORE_CM1_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M1
@{
*/
#include "cmsis_version.h"
/* CMSIS CM1 definitions */
#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
__CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
#define __CORTEX_M (1U) /*!< Cortex-M Core */
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TI_ARM__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM1_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM1_H_DEPENDANT
#define __CORE_CM1_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM1_REV
#define __CM1_REV 0x0100U
#warning "__CM1_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M1 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
\brief Type definitions for the System Control and ID Register not in the SCB
@{
*/
/**
\brief Structure type to access the System Control and ID Register not in the SCB.
*/
typedef struct
{
uint32_t RESERVED0[2U];
__IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
} SCnSCB_Type;
/* Auxiliary Control Register Definitions */
#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
/*@} end of group CMSIS_SCnotSCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M1 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Core Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
#ifdef CMSIS_NVIC_VIRTUAL
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
#endif
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
#define NVIC_EnableIRQ __NVIC_EnableIRQ
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
#define NVIC_DisableIRQ __NVIC_DisableIRQ
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */
#define NVIC_SetPriority __NVIC_SetPriority
#define NVIC_GetPriority __NVIC_GetPriority
#define NVIC_SystemReset __NVIC_SystemReset
#endif /* CMSIS_NVIC_VIRTUAL */
#ifdef CMSIS_VECTAB_VIRTUAL
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
#endif
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetVector __NVIC_SetVector
#define NVIC_GetVector __NVIC_GetVector
#endif /* (CMSIS_VECTAB_VIRTUAL) */
#define NVIC_USER_IRQ_OFFSET 16
/* The following EXC_RETURN values are saved the LR on exception entry */
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
/* Interrupt Priorities are WORD accessible only under Armv6-M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
#define __NVIC_SetPriorityGrouping(X) (void)(X)
#define __NVIC_GetPriorityGrouping() (0U)
/**
\brief Enable Interrupt
\details Enables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Get Interrupt Enable status
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt is not enabled.
\return 1 Interrupt is enabled.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Disable Interrupt
\details Disables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__DSB();
__ISB();
}
}
/**
\brief Get Pending Interrupt
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Set Interrupt Priority
\details Sets the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
\note The priority cannot be set for every processor exception.
*/
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief Encode Priority
\details Encodes the priority for an interrupt with the given priority group,
preemptive priority value, and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
\param [in] PriorityGroup Used priority group.
\param [in] PreemptPriority Preemptive priority value (starting from 0).
\param [in] SubPriority Subpriority value (starting from 0).
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
*/
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
return (
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
);
}
/**
\brief Decode Priority
\details Decodes an interrupt priority value with a given priority group to
preemptive priority value and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
\param [in] PriorityGroup Used priority group.
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
\param [out] pSubPriority Subpriority value (starting from 0).
*/
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
}
/**
\brief Set Interrupt Vector
\details Sets an interrupt vector in SRAM based interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
Address 0 must be mapped to SRAM.
\param [in] IRQn Interrupt number
\param [in] vector Address of interrupt handler function
*/
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
{
uint32_t *vectors = (uint32_t *)0x0U;
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
}
/**
\brief Get Interrupt Vector
\details Reads an interrupt vector from interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Address of interrupt handler function
*/
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
{
uint32_t *vectors = (uint32_t *)0x0U;
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ########################## FPU functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_FpuFunctions FPU Functions
\brief Function that provides FPU type.
@{
*/
/**
\brief get FPU type
\details returns the FPU type
\returns
- \b 0: No FPU
- \b 1: Single precision FPU
- \b 2: Double + Single precision FPU
*/
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
{
return 0U; /* No FPU */
}
/*@} end of CMSIS_Core_FpuFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM1_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */

1993
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm23.h Normal file
View File

File diff suppressed because it is too large Load Diff

1941
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm3.h Normal file
View File

File diff suppressed because it is too large Load Diff

3002
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm33.h Normal file
View File

File diff suppressed because it is too large Load Diff

2129
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm4.h Normal file
View File

File diff suppressed because it is too large Load Diff

2671
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_cm7.h Normal file
View File

File diff suppressed because it is too large Load Diff

1022
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_sc000.h Normal file
View File

File diff suppressed because it is too large Load Diff

1915
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/core_sc300.h Normal file
View File

File diff suppressed because it is too large Load Diff

270
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/mpu_armv7.h Normal file
View File

@@ -0,0 +1,270 @@
/******************************************************************************
* @file mpu_armv7.h
* @brief CMSIS MPU API for Armv7-M MPU
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV7_H
#define ARM_MPU_ARMV7_H
#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only
#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only
#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access
/** MPU Region Base Address Register Value
*
* \param Region The region to be configured, number 0 to 15.
* \param BaseAddress The base address for the region.
*/
#define ARM_MPU_RBAR(Region, BaseAddress) \
(((BaseAddress) & MPU_RBAR_ADDR_Msk) | \
((Region) & MPU_RBAR_REGION_Msk) | \
(MPU_RBAR_VALID_Msk))
/**
* MPU Memory Access Attributes
*
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
*/
#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \
((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \
(((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \
(((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \
(((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \
((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \
(((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \
(((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
/**
* MPU Memory Access Attribute for strongly ordered memory.
* - TEX: 000b
* - Shareable
* - Non-cacheable
* - Non-bufferable
*/
#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
/**
* MPU Memory Access Attribute for device memory.
* - TEX: 000b (if non-shareable) or 010b (if shareable)
* - Shareable or non-shareable
* - Non-cacheable
* - Bufferable (if shareable) or non-bufferable (if non-shareable)
*
* \param IsShareable Configures the device memory as shareable or non-shareable.
*/
#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
/**
* MPU Memory Access Attribute for normal memory.
* - TEX: 1BBb (reflecting outer cacheability rules)
* - Shareable or non-shareable
* - Cacheable or non-cacheable (reflecting inner cacheability rules)
* - Bufferable or non-bufferable (reflecting inner cacheability rules)
*
* \param OuterCp Configures the outer cache policy.
* \param InnerCp Configures the inner cache policy.
* \param IsShareable Configures the memory as shareable or non-shareable.
*/
#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
/**
* MPU Memory Access Attribute non-cacheable policy.
*/
#define ARM_MPU_CACHEP_NOCACHE 0U
/**
* MPU Memory Access Attribute write-back, write and read allocate policy.
*/
#define ARM_MPU_CACHEP_WB_WRA 1U
/**
* MPU Memory Access Attribute write-through, no write allocate policy.
*/
#define ARM_MPU_CACHEP_WT_NWA 2U
/**
* MPU Memory Access Attribute write-back, no write allocate policy.
*/
#define ARM_MPU_CACHEP_WB_NWA 3U
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; //!< The region base address register value (RBAR)
uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
MPU->RNR = rnr;
MPU->RASR = 0U;
}
/** Configure an MPU region.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
{
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
{
MPU->RNR = rnr;
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
while (cnt > MPU_TYPE_RALIASES) {
orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
table += MPU_TYPE_RALIASES;
cnt -= MPU_TYPE_RALIASES;
}
orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
}
#endif

333
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/mpu_armv8.h Normal file
View File

@@ -0,0 +1,333 @@
/******************************************************************************
* @file mpu_armv8.h
* @brief CMSIS MPU API for Armv8-M MPU
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV8_H
#define ARM_MPU_ARMV8_H
/** \brief Attribute for device memory (outer only) */
#define ARM_MPU_ATTR_DEVICE ( 0U )
/** \brief Attribute for non-cacheable, normal memory */
#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U )
/** \brief Attribute for normal memory (outer and inner)
* \param NT Non-Transient: Set to 1 for non-transient data.
* \param WB Write-Back: Set to 1 to use write-back update policy.
* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
*/
#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
(((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRE (1U)
/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGRE (2U)
/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_GRE (3U)
/** \brief Memory Attribute
* \param O Outer memory attributes
* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
*/
#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
/** \brief Normal memory non-shareable */
#define ARM_MPU_SH_NON (0U)
/** \brief Normal memory outer shareable */
#define ARM_MPU_SH_OUTER (2U)
/** \brief Normal memory inner shareable */
#define ARM_MPU_SH_INNER (3U)
/** \brief Memory access permissions
* \param RO Read-Only: Set to 1 for read-only memory.
* \param NP Non-Privileged: Set to 1 for non-privileged memory.
*/
#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
/** \brief Region Base Address Register value
* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
* \param SH Defines the Shareability domain for this memory region.
* \param RO Read-Only: Set to 1 for a read-only memory region.
* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
*/
#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
((BASE & MPU_RBAR_BASE_Msk) | \
((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
/** \brief Region Limit Address Register value
* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
* \param IDX The attribute index to be associated with this memory region.
*/
#define ARM_MPU_RLAR(LIMIT, IDX) \
((LIMIT & MPU_RLAR_LIMIT_Msk) | \
((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
(MPU_RLAR_EN_Msk))
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; /*!< Region Base Address Register value */
uint32_t RLAR; /*!< Region Limit Address Register value */
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#ifdef MPU_NS
/** Enable the Non-secure MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the Non-secure MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable_NS(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#endif
/** Set the memory attribute encoding to the given MPU.
* \param mpu Pointer to the MPU to be configured.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
{
const uint8_t reg = idx / 4U;
const uint32_t pos = ((idx % 4U) * 8U);
const uint32_t mask = 0xFFU << pos;
if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
return; // invalid index
}
mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
}
/** Set the memory attribute encoding.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU, idx, attr);
}
#ifdef MPU_NS
/** Set the memory attribute encoding to the Non-secure MPU.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
}
#endif
/** Clear and disable the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
{
mpu->RNR = rnr;
mpu->RLAR = 0U;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU, rnr);
}
#ifdef MPU_NS
/** Clear and disable the given Non-secure MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU_NS, rnr);
}
#endif
/** Configure the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
mpu->RNR = rnr;
mpu->RBAR = rbar;
mpu->RLAR = rlar;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
}
#ifdef MPU_NS
/** Configure the given Non-secure MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);
}
#endif
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table to the given MPU.
* \param mpu Pointer to the MPU registers to be used.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
if (cnt == 1U) {
mpu->RNR = rnr;
orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
} else {
uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U);
uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
table += c;
cnt -= c;
rnrOffset = 0U;
rnrBase += MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
}
orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
}
}
/** Load the given number of MPU regions from a table.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU, rnr, table, cnt);
}
#ifdef MPU_NS
/** Load the given number of MPU regions from a table to the Non-secure MPU.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
}
#endif
#endif

70
demo/stm32/usb_device/stm32h743vbt6/Drivers/CMSIS/Include/tz_context.h Normal file
View File

@@ -0,0 +1,70 @@
/******************************************************************************
* @file tz_context.h
* @brief Context Management for Armv8-M TrustZone
* @version V1.0.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef TZ_CONTEXT_H
#define TZ_CONTEXT_H
#include <stdint.h>
#ifndef TZ_MODULEID_T
#define TZ_MODULEID_T
/// \details Data type that identifies secure software modules called by a process.
typedef uint32_t TZ_ModuleId_t;
#endif
/// \details TZ Memory ID identifies an allocated memory slot.
typedef uint32_t TZ_MemoryId_t;
/// Initialize secure context memory system
/// \return execution status (1: success, 0: error)
uint32_t TZ_InitContextSystem_S (void);
/// Allocate context memory for calling secure software modules in TrustZone
/// \param[in] module identifies software modules called from non-secure mode
/// \return value != 0 id TrustZone memory slot identifier
/// \return value 0 no memory available or internal error
TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
/// Load secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
/// Store secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
#endif // TZ_CONTEXT_H

3784
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h Normal file
View File

File diff suppressed because it is too large Load Diff

1139
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h Normal file
View File

File diff suppressed because it is too large Load Diff

461
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h Normal file
View File

@@ -0,0 +1,461 @@
/**
******************************************************************************
* @file stm32h7xx_hal_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_CORTEX_H
#define STM32H7xx_HAL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup CORTEX
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
* @{
*/
#if (__MPU_PRESENT == 1)
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
* @brief MPU Region initialization structure
* @{
*/
typedef struct
{
uint8_t Enable; /*!< Specifies the status of the region.
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
uint8_t Number; /*!< Specifies the number of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
uint8_t Size; /*!< Specifies the size of the region to protect.
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
uint8_t TypeExtField; /*!< Specifies the TEX field level.
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
uint8_t AccessPermission; /*!< Specifies the region access permission type.
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
uint8_t DisableExec; /*!< Specifies the instruction access status.
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
}MPU_Region_InitTypeDef;
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
* @{
*/
#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
0 bits for subpriority */
/**
* @}
*/
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
* @{
*/
#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
/**
* @}
*/
#if (__MPU_PRESENT == 1)
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
* @{
*/
#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000)
#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002)
#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004)
#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
* @{
*/
#define MPU_REGION_ENABLE ((uint8_t)0x01)
#define MPU_REGION_DISABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
* @{
*/
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
* @{
*/
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
* @{
*/
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
* @{
*/
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
* @{
*/
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
* @{
*/
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
* @{
*/
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
/**
* @}
*/
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
* @{
*/
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
#if !defined(CORE_CM4)
#define MPU_REGION_NUMBER8 ((uint8_t)0x08)
#define MPU_REGION_NUMBER9 ((uint8_t)0x09)
#define MPU_REGION_NUMBER10 ((uint8_t)0x0A)
#define MPU_REGION_NUMBER11 ((uint8_t)0x0B)
#define MPU_REGION_NUMBER12 ((uint8_t)0x0C)
#define MPU_REGION_NUMBER13 ((uint8_t)0x0D)
#define MPU_REGION_NUMBER14 ((uint8_t)0x0E)
#define MPU_REGION_NUMBER15 ((uint8_t)0x0F)
#endif /* !defined(CORE_CM4) */
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported Macros -----------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup CORTEX_CPU_Identifier CORTEX_CPU_Identifier
* @{
*/
#define CM7_CPUID ((uint32_t)0x00000003)
#if defined(DUAL_CORE)
#define CM4_CPUID ((uint32_t)0x00000001)
#endif /*DUAL_CORE*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup CORTEX_Exported_Functions
* @{
*/
/** @addtogroup CORTEX_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
void HAL_NVIC_SystemReset(void);
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
/**
* @}
*/
/** @addtogroup CORTEX_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ***********************************************/
#if (__MPU_PRESENT == 1)
void HAL_MPU_Enable(uint32_t MPU_Control);
void HAL_MPU_Disable(void);
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
#endif /* __MPU_PRESENT */
uint32_t HAL_NVIC_GetPriorityGrouping(void);
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
void HAL_SYSTICK_IRQHandler(void);
void HAL_SYSTICK_Callback(void);
uint32_t HAL_GetCurrentCPUID(void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
* @{
*/
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
((GROUP) == NVIC_PRIORITYGROUP_1) || \
((GROUP) == NVIC_PRIORITYGROUP_2) || \
((GROUP) == NVIC_PRIORITYGROUP_3) || \
((GROUP) == NVIC_PRIORITYGROUP_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10UL)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10UL)
#define IS_NVIC_DEVICE_IRQ(IRQ) (((int32_t)IRQ) >= 0x00)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
#if (__MPU_PRESENT == 1)
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
((STATE) == MPU_REGION_DISABLE))
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
((TYPE) == MPU_TEX_LEVEL1) || \
((TYPE) == MPU_TEX_LEVEL2))
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RW) || \
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
((TYPE) == MPU_REGION_FULL_ACCESS) || \
((TYPE) == MPU_REGION_PRIV_RO) || \
((TYPE) == MPU_REGION_PRIV_RO_URO))
#if !defined(CORE_CM4)
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
((NUMBER) == MPU_REGION_NUMBER1) || \
((NUMBER) == MPU_REGION_NUMBER2) || \
((NUMBER) == MPU_REGION_NUMBER3) || \
((NUMBER) == MPU_REGION_NUMBER4) || \
((NUMBER) == MPU_REGION_NUMBER5) || \
((NUMBER) == MPU_REGION_NUMBER6) || \
((NUMBER) == MPU_REGION_NUMBER7) || \
((NUMBER) == MPU_REGION_NUMBER8) || \
((NUMBER) == MPU_REGION_NUMBER9) || \
((NUMBER) == MPU_REGION_NUMBER10) || \
((NUMBER) == MPU_REGION_NUMBER11) || \
((NUMBER) == MPU_REGION_NUMBER12) || \
((NUMBER) == MPU_REGION_NUMBER13) || \
((NUMBER) == MPU_REGION_NUMBER14) || \
((NUMBER) == MPU_REGION_NUMBER15))
#else
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
((NUMBER) == MPU_REGION_NUMBER1) || \
((NUMBER) == MPU_REGION_NUMBER2) || \
((NUMBER) == MPU_REGION_NUMBER3) || \
((NUMBER) == MPU_REGION_NUMBER4) || \
((NUMBER) == MPU_REGION_NUMBER5) || \
((NUMBER) == MPU_REGION_NUMBER6) || \
((NUMBER) == MPU_REGION_NUMBER7))
#endif /* !defined(CORE_CM4) */
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
((SIZE) == MPU_REGION_SIZE_64B) || \
((SIZE) == MPU_REGION_SIZE_128B) || \
((SIZE) == MPU_REGION_SIZE_256B) || \
((SIZE) == MPU_REGION_SIZE_512B) || \
((SIZE) == MPU_REGION_SIZE_1KB) || \
((SIZE) == MPU_REGION_SIZE_2KB) || \
((SIZE) == MPU_REGION_SIZE_4KB) || \
((SIZE) == MPU_REGION_SIZE_8KB) || \
((SIZE) == MPU_REGION_SIZE_16KB) || \
((SIZE) == MPU_REGION_SIZE_32KB) || \
((SIZE) == MPU_REGION_SIZE_64KB) || \
((SIZE) == MPU_REGION_SIZE_128KB) || \
((SIZE) == MPU_REGION_SIZE_256KB) || \
((SIZE) == MPU_REGION_SIZE_512KB) || \
((SIZE) == MPU_REGION_SIZE_1MB) || \
((SIZE) == MPU_REGION_SIZE_2MB) || \
((SIZE) == MPU_REGION_SIZE_4MB) || \
((SIZE) == MPU_REGION_SIZE_8MB) || \
((SIZE) == MPU_REGION_SIZE_16MB) || \
((SIZE) == MPU_REGION_SIZE_32MB) || \
((SIZE) == MPU_REGION_SIZE_64MB) || \
((SIZE) == MPU_REGION_SIZE_128MB) || \
((SIZE) == MPU_REGION_SIZE_256MB) || \
((SIZE) == MPU_REGION_SIZE_512MB) || \
((SIZE) == MPU_REGION_SIZE_1GB) || \
((SIZE) == MPU_REGION_SIZE_2GB) || \
((SIZE) == MPU_REGION_SIZE_4GB))
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_CORTEX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

188
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h Normal file
View File

@@ -0,0 +1,188 @@
/**
******************************************************************************
* @file stm32h7xx_hal_def.h
* @author MCD Application Team
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_DEF
#define STM32H7xx_HAL_DEF
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx.h"
#include "Legacy/stm32_hal_legacy.h"
#include <stddef.h>
#include <math.h>
/* Exported types ------------------------------------------------------------*/
/**
* @brief HAL Status structures definition
*/
typedef enum
{
HAL_OK = 0x00,
HAL_ERROR = 0x01,
HAL_BUSY = 0x02,
HAL_TIMEOUT = 0x03
} HAL_StatusTypeDef;
/**
* @brief HAL Lock structures definition
*/
typedef enum
{
HAL_UNLOCKED = 0x00,
HAL_LOCKED = 0x01
} HAL_LockTypeDef;
/* Exported macro ------------------------------------------------------------*/
#define HAL_MAX_DELAY 0xFFFFFFFFU
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
do{ \
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
(__DMA_HANDLE__).Parent = (__HANDLE__); \
} while(0)
#define UNUSED(x) ((void)(x))
/** @brief Reset the Handle's State field.
* @param __HANDLE__: specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
* - When the Handle is declared as local variable; before passing it as parameter
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
* to set to 0 the Handle's "State" field.
* Otherwise, "State" field may have any random value and the first time the function
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
* (i.e. HAL_PPP_MspInit() will not be executed).
* - When there is a need to reconfigure the low level hardware: instead of calling
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
* @retval None
*/
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
#if (USE_RTOS == 1)
#error " USE_RTOS should be 0 in the current HAL release "
#else
#define __HAL_LOCK(__HANDLE__) \
do{ \
if((__HANDLE__)->Lock == HAL_LOCKED) \
{ \
return HAL_BUSY; \
} \
else \
{ \
(__HANDLE__)->Lock = HAL_LOCKED; \
} \
}while (0)
#define __HAL_UNLOCK(__HANDLE__) \
do{ \
(__HANDLE__)->Lock = HAL_UNLOCKED; \
}while (0)
#endif /* USE_RTOS */
#if defined ( __GNUC__ )
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
#if defined (__GNUC__) /* GNU Compiler */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4)))
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif /* __ALIGN_BEGIN */
#else
#ifndef __ALIGN_END
#define __ALIGN_END
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#if defined (__CC_ARM) /* ARM Compiler */
#define __ALIGN_BEGIN __align(4)
#elif defined (__ICCARM__) /* IAR Compiler */
#define __ALIGN_BEGIN
#endif /* __CC_ARM */
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
#if defined (__GNUC__) /* GNU Compiler */
#define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32)))
#elif defined (__ICCARM__) /* IAR Compiler */
#define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
#elif defined (__CC_ARM) /* ARM Compiler */
#define ALIGN_32BYTES(buf) __align(32) buf
#endif
/**
* @brief __RAM_FUNC definition
*/
#if defined ( __CC_ARM )
/* ARM Compiler
------------
RAM functions are defined using the toolchain options.
Functions that are executed in RAM should reside in a separate source module.
Using the 'Options for File' dialog you can simply change the 'Code / Const'
area of a module to a memory space in physical RAM.
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
dialog.
*/
#define __RAM_FUNC
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc
#elif defined ( __GNUC__ )
/* GNU Compiler
------------
RAM functions are defined using a specific toolchain attribute
"__attribute__((section(".RamFunc")))".
*/
#define __RAM_FUNC __attribute__((section(".RamFunc")))
#endif
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_DEF */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1327
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h Normal file
View File

File diff suppressed because it is too large Load Diff

312
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h Normal file
View File

@@ -0,0 +1,312 @@
/**
******************************************************************************
* @file stm32h7xx_hal_dma_ex.h
* @author MCD Application Team
* @brief Header file of DMA HAL extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_DMA_EX_H
#define STM32H7xx_HAL_DMA_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup DMAEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
* @brief DMAEx Exported types
* @{
*/
/**
* @brief HAL DMA Memory definition
*/
typedef enum
{
MEMORY0 = 0x00U, /*!< Memory 0 */
MEMORY1 = 0x01U, /*!< Memory 1 */
}HAL_DMA_MemoryTypeDef;
/**
* @brief HAL DMAMUX Synchronization configuration structure definition
*/
typedef struct
{
uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode.
This parameter can be a value of @ref DMAEx_MUX_SyncSignalID_selection */
uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized.
This parameter can be a value of @ref DMAEx_MUX_SyncPolarity_selection */
FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled
This parameter can take the value ENABLE or DISABLE*/
FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached.
This parameter can take the value ENABLE or DISABLE */
uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event.
This parameters can be in the range 1 to 32 */
}HAL_DMA_MuxSyncConfigTypeDef;
/**
* @brief HAL DMAMUX request generator parameters structure definition
*/
typedef struct
{
uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator
This parameter can be a value of @ref DMAEx_MUX_SignalGeneratorID_selection */
uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated.
This parameter can be a value of @ref DMAEx_MUX_RequestGeneneratorPolarity_selection */
uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event.
This parameters can be in the range 1 to 32 */
}HAL_DMA_MuxRequestGeneratorConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Constants DMA Exported Constants
* @brief DMAEx Exported constants
* @{
*/
/** @defgroup DMAEx_MUX_SyncSignalID_selection DMAEx MUX SyncSignalID selection
* @brief DMAEx MUX SyncSignalID selection
* @{
*/
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */
#define HAL_DMAMUX1_SYNC_LPTIM1_OUT 3U /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT */
#define HAL_DMAMUX1_SYNC_LPTIM2_OUT 4U /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT */
#define HAL_DMAMUX1_SYNC_LPTIM3_OUT 5U /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT */
#define HAL_DMAMUX1_SYNC_EXTI0 6U /*!< DMAMUX1 synchronization Signal is EXTI0 IT */
#define HAL_DMAMUX1_SYNC_TIM12_TRGO 7U /*!< DMAMUX1 synchronization Signal is TIM12 TRGO */
#define HAL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel0 Event */
#define HAL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel1 Event */
#define HAL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel2 Event */
#define HAL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel3 Event */
#define HAL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel4 Event */
#define HAL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel5 Event */
#define HAL_DMAMUX2_SYNC_LPUART1_RX_WKUP 6U /*!< DMAMUX2 synchronization Signal is LPUART1 RX Wakeup */
#define HAL_DMAMUX2_SYNC_LPUART1_TX_WKUP 7U /*!< DMAMUX2 synchronization Signal is LPUART1 TX Wakeup */
#define HAL_DMAMUX2_SYNC_LPTIM2_OUT 8U /*!< DMAMUX2 synchronization Signal is LPTIM2 output */
#define HAL_DMAMUX2_SYNC_LPTIM3_OUT 9U /*!< DMAMUX2 synchronization Signal is LPTIM3 output */
#define HAL_DMAMUX2_SYNC_I2C4_WKUP 10U /*!< DMAMUX2 synchronization Signal is I2C4 Wakeup */
#define HAL_DMAMUX2_SYNC_SPI6_WKUP 11U /*!< DMAMUX2 synchronization Signal is SPI6 Wakeup */
#define HAL_DMAMUX2_SYNC_COMP1_OUT 12U /*!< DMAMUX2 synchronization Signal is Comparator 1 output */
#define HAL_DMAMUX2_SYNC_RTC_WKUP 13U /*!< DMAMUX2 synchronization Signal is RTC Wakeup */
#define HAL_DMAMUX2_SYNC_EXTI0 14U /*!< DMAMUX2 synchronization Signal is EXTI0 IT */
#define HAL_DMAMUX2_SYNC_EXTI2 15U /*!< DMAMUX2 synchronization Signal is EXTI2 IT */
/**
* @}
*/
/** @defgroup DMAEx_MUX_SyncPolarity_selection DMAEx MUX SyncPolarity selection
* @brief DMAEx MUX SyncPolarity selection
* @{
*/
#define HAL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< block synchronization events */
#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */
#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */
#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */
/**
* @}
*/
/** @defgroup DMAEx_MUX_SignalGeneratorID_selection DMAEx MUX SignalGeneratorID selection
* @brief DMAEx MUX SignalGeneratorID selection
* @{
*/
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */
#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT 3U /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT */
#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT 4U /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT */
#define HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT 5U /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT */
#define HAL_DMAMUX1_REQ_GEN_EXTI0 6U /*!< DMAMUX1 Request generator Signal is EXTI0 IT */
#define HAL_DMAMUX1_REQ_GEN_TIM12_TRGO 7U /*!< DMAMUX1 Request generator Signal is TIM12 TRGO */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel0 Event */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel1 Event */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel2 Event */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel3 Event */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel4 Event */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel5 Event */
#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT 6U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel6 Event */
#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP 7U /*!< DMAMUX2 Request generator Signal is LPUART1 RX Wakeup */
#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP 8U /*!< DMAMUX2 Request generator Signal is LPUART1 TX Wakeup */
#define HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP 9U /*!< DMAMUX2 Request generator Signal is LPTIM2 Wakeup */
#define HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT 10U /*!< DMAMUX2 Request generator Signal is LPTIM2 OUT */
#define HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP 11U /*!< DMAMUX2 Request generator Signal is LPTIM3 Wakeup */
#define HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT 12U /*!< DMAMUX2 Request generator Signal is LPTIM3 OUT */
#if defined(LPTIM4)
#define HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP 13U /*!< DMAMUX2 Request generator Signal is LPTIM4 Wakeup */
#endif /* LPTIM4 */
#if defined(LPTIM5)
#define HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP 14U /*!< DMAMUX2 Request generator Signal is LPTIM5 Wakeup */
#endif /* LPTIM5 */
#define HAL_DMAMUX2_REQ_GEN_I2C4_WKUP 15U /*!< DMAMUX2 Request generator Signal is I2C4 Wakeup */
#define HAL_DMAMUX2_REQ_GEN_SPI6_WKUP 16U /*!< DMAMUX2 Request generator Signal is SPI6 Wakeup */
#define HAL_DMAMUX2_REQ_GEN_COMP1_OUT 17U /*!< DMAMUX2 Request generator Signal is Comparator 1 output */
#define HAL_DMAMUX2_REQ_GEN_COMP2_OUT 18U /*!< DMAMUX2 Request generator Signal is Comparator 2 output */
#define HAL_DMAMUX2_REQ_GEN_RTC_WKUP 19U /*!< DMAMUX2 Request generator Signal is RTC Wakeup */
#define HAL_DMAMUX2_REQ_GEN_EXTI0 20U /*!< DMAMUX2 Request generator Signal is EXTI0 */
#define HAL_DMAMUX2_REQ_GEN_EXTI2 21U /*!< DMAMUX2 Request generator Signal is EXTI2 */
#define HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT 22U /*!< DMAMUX2 Request generator Signal is I2C4 IT Event */
#define HAL_DMAMUX2_REQ_GEN_SPI6_IT 23U /*!< DMAMUX2 Request generator Signal is SPI6 IT */
#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT 24U /*!< DMAMUX2 Request generator Signal is LPUART1 Tx IT */
#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT 25U /*!< DMAMUX2 Request generator Signal is LPUART1 Rx IT */
#if defined(ADC3)
#define HAL_DMAMUX2_REQ_GEN_ADC3_IT 26U /*!< DMAMUX2 Request generator Signal is ADC3 IT */
#define HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT 27U /*!< DMAMUX2 Request generator Signal is ADC3 Analog Watchdog 1 output */
#endif /* ADC3 */
#define HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT 28U /*!< DMAMUX2 Request generator Signal is BDMA Channel 0 IT */
#define HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT 29U /*!< DMAMUX2 Request generator Signal is BDMA Channel 1 IT */
/**
* @}
*/
/** @defgroup DMAEx_MUX_RequestGeneneratorPolarity_selection DMAEx MUX RequestGeneneratorPolarity selection
* @brief DMAEx MUX RequestGeneneratorPolarity selection
* @{
*/
#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< block request generator events */
#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */
#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */
#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
* @brief DMAEx Exported functions
* @{
*/
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
* @{
*/
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig);
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig);
HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma);
HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma);
void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DMAEx_Private_Macros DMA Private Macros
* @brief DMAEx private macros
* @{
*/
#define IS_DMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_TIM12_TRGO)
#define IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_SYNC_EXTI2)
#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \
((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \
((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \
((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING))
#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE))
#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \
((EVENT) == ENABLE))
#define IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_TIM12_TRGO)
#define IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT)
#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \
((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \
((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \
((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
* @brief DMAEx Private functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_DMA_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

538
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h Normal file
View File

@@ -0,0 +1,538 @@
/**
******************************************************************************
* @file stm32h7xx_hal_exti.h
* @author MCD Application Team
* @brief Header file of EXTI HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_EXTI_H
#define STM32H7xx_HAL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup EXTI EXTI
* @brief EXTI HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Types EXTI Exported Types
* @{
*/
typedef enum
{
HAL_EXTI_COMMON_CB_ID = 0x00U,
} EXTI_CallbackIDTypeDef;
/**
* @brief EXTI Handle structure definition
*/
typedef struct
{
uint32_t Line; /*!< Exti line number */
void (* PendingCallback)(void); /*!< Exti pending callback */
} EXTI_HandleTypeDef;
/**
* @brief EXTI Configuration structure definition
*/
typedef struct
{
uint32_t Line; /*!< The Exti line to be configured. This parameter
can be a value of @ref EXTI_Line */
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
This parameter can be a combination of @ref EXTI_Mode */
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
can be a value of @ref EXTI_Trigger */
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
This parameter is only possible for line 0 to 15. It
can be a value of @ref EXTI_GPIOSel */
uint32_t PendClearSource; /*!< Specifies the event pending clear source for D3/SRD
domain. This parameter can be a value of @ref
EXTI_PendClear_Source */
} EXTI_ConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_Line EXTI Line
* @{
*/
#define EXTI_LINE_0 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x00U)
#define EXTI_LINE_1 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x01U)
#define EXTI_LINE_2 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x02U)
#define EXTI_LINE_3 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x03U)
#define EXTI_LINE_4 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x04U)
#define EXTI_LINE_5 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x05U)
#define EXTI_LINE_6 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x06U)
#define EXTI_LINE_7 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x07U)
#define EXTI_LINE_8 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x08U)
#define EXTI_LINE_9 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x09U)
#define EXTI_LINE_10 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0AU)
#define EXTI_LINE_11 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0BU)
#define EXTI_LINE_12 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0CU)
#define EXTI_LINE_13 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0DU)
#define EXTI_LINE_14 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0EU)
#define EXTI_LINE_15 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0FU)
#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x10U)
#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x11U)
#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x12U)
#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x13U)
#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x14U)
#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x15U)
#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x16U)
#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x17U)
#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x18U)
#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x19U)
#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU)
#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU)
#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU)
#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU)
#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU)
#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU)
#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x00U)
#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x01U)
#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x02U)
#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x03U)
#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x04U)
#define EXTI_LINE_37 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x05U)
#define EXTI_LINE_38 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x06U)
#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x07U)
#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x08U)
#define EXTI_LINE_41 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x09U)
#define EXTI_LINE_42 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU)
#define EXTI_LINE_43 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU)
#if !defined(USB2_OTG_FS)
#define EXTI_LINE_44 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0CU)
#else
#define EXTI_LINE_44 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU)
#endif /* USB2_OTG_FS */
#define EXTI_LINE_45 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0DU)
#if defined(DSI)
#define EXTI_LINE_46 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0EU)
#else
#define EXTI_LINE_46 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0EU)
#endif /* DSI */
#define EXTI_LINE_47 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0FU)
#define EXTI_LINE_48 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x10U)
#define EXTI_LINE_49 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x11U)
#define EXTI_LINE_50 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x12U)
#define EXTI_LINE_51 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x13U)
#if defined(LPTIM4)
#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x14U)
#else
#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x14U)
#endif /*LPTIM4*/
#if defined(LPTIM5)
#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x15U)
#else
#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x15U)
#endif /*LPTIM5*/
#define EXTI_LINE_54 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x16U)
#define EXTI_LINE_55 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x17U)
#define EXTI_LINE_56 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x18U)
#if defined(EXTI_IMR2_IM57)
#define EXTI_LINE_57 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x19U)
#else
#define EXTI_LINE_57 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x19U)
#endif /*EXTI_IMR2_IM57*/
#define EXTI_LINE_58 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU)
#if defined(EXTI_IMR2_IM59)
#define EXTI_LINE_59 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU)
#else
#define EXTI_LINE_59 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x1BU)
#endif /*EXTI_IMR2_IM59*/
#define EXTI_LINE_60 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU)
#define EXTI_LINE_61 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU)
#define EXTI_LINE_62 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU)
#define EXTI_LINE_63 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU)
#define EXTI_LINE_64 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x00U)
#define EXTI_LINE_65 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x01U)
#define EXTI_LINE_66 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x02U)
#define EXTI_LINE_67 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x03U)
#define EXTI_LINE_68 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x04U)
#define EXTI_LINE_69 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x05U)
#define EXTI_LINE_70 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x06U)
#define EXTI_LINE_71 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x07U)
#define EXTI_LINE_72 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x08U)
#define EXTI_LINE_73 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x09U)
#define EXTI_LINE_74 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU)
#if defined(ADC3)
#define EXTI_LINE_75 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU)
#else
#define EXTI_LINE_75 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE | 0x0BU)
#endif /* ADC3 */
#if defined(SAI4)
#define EXTI_LINE_76 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU)
#else
#define EXTI_LINE_76 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE | 0x0CU)
#endif /* SAI4 */
#if defined (DUAL_CORE)
#define EXTI_LINE_77 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0DU)
#define EXTI_LINE_78 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x0EU)
#define EXTI_LINE_79 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0FU)
#define EXTI_LINE_80 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x10U)
#else
#define EXTI_LINE_77 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0DU)
#define EXTI_LINE_78 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0EU)
#define EXTI_LINE_79 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0FU)
#define EXTI_LINE_80 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x10U)
#endif /* DUAL_CORE */
#define EXTI_LINE_81 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x11U)
#if defined (DUAL_CORE)
#define EXTI_LINE_82 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x12U)
#else
#define EXTI_LINE_82 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x12U)
#endif /* DUAL_CORE */
#define EXTI_LINE_83 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x13U)
#if defined (DUAL_CORE)
#define EXTI_LINE_84 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x14U)
#else
#define EXTI_LINE_84 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x14U)
#endif /* DUAL_CORE */
#define EXTI_LINE_85 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x15U)
#if defined(ETH)
#define EXTI_LINE_86 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x16U)
#else
#define EXTI_LINE_86 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x16U)
#endif /* ETH */
#define EXTI_LINE_87 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x17U)
#if defined(DTS)
#define EXTI_LINE_88 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL | 0x18U)
#endif /* DTS */
#if defined(EXTI_IMR3_IM89)
#define EXTI_LINE_89 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x19U)
#endif /*EXTI_IMR3_IM89*/
#if defined(EXTI_IMR3_IM90)
#define EXTI_LINE_90 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU)
#endif /*EXTI_IMR3_IM90*/
#if defined(I2C5)
#define EXTI_LINE_91 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU)
#endif /*I2C5*/
/**
* @}
*/
/** @defgroup EXTI_Mode EXTI Mode
* @{
*/
#define EXTI_MODE_NONE 0x00000000U
#define EXTI_MODE_INTERRUPT 0x00000001U
#define EXTI_MODE_EVENT 0x00000002U
#if defined(DUAL_CORE)
#define EXTI_MODE_CORE1_INTERRUPT EXTI_MODE_INTERRUPT
#define EXTI_MODE_CORE1_EVENT EXTI_MODE_EVENT
#define EXTI_MODE_CORE2_INTERRUPT 0x00000010U
#define EXTI_MODE_CORE2_EVENT 0x00000020U
#endif /* DUAL_CORE */
/**
* @}
*/
/** @defgroup EXTI_Trigger EXTI Trigger
* @{
*/
#define EXTI_TRIGGER_NONE 0x00000000U
#define EXTI_TRIGGER_RISING 0x00000001U
#define EXTI_TRIGGER_FALLING 0x00000002U
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @}
*/
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
* @brief
* @{
*/
#define EXTI_GPIOA 0x00000000U
#define EXTI_GPIOB 0x00000001U
#define EXTI_GPIOC 0x00000002U
#define EXTI_GPIOD 0x00000003U
#define EXTI_GPIOE 0x00000004U
#define EXTI_GPIOF 0x00000005U
#define EXTI_GPIOG 0x00000006U
#define EXTI_GPIOH 0x00000007U
#if defined(GPIOI)
#define EXTI_GPIOI 0x00000008U
#endif /*GPIOI*/
#define EXTI_GPIOJ 0x00000009U
#define EXTI_GPIOK 0x0000000AU
/**
* @}
*/
/** @defgroup EXTI_PendClear_Source EXTI PendClear Source
* @brief
* @{
*/
#define EXTI_D3_PENDCLR_SRC_NONE 0x00000000U /*!< No D3 domain pendclear source , PMRx register to be set to zero */
#define EXTI_D3_PENDCLR_SRC_DMACH6 0x00000001U /*!< DMA ch6 event selected as D3 domain pendclear source, PMRx register to be set to 1 */
#define EXTI_D3_PENDCLR_SRC_DMACH7 0x00000002U /*!< DMA ch7 event selected as D3 domain pendclear source, PMRx register to be set to 1*/
#if defined (LPTIM4)
#define EXTI_D3_PENDCLR_SRC_LPTIM4 0x00000003U /*!< LPTIM4 out selected as D3 domain pendclear source, PMRx register to be set to 1 */
#else
#define EXTI_D3_PENDCLR_SRC_LPTIM2 0x00000003U /*!< LPTIM2 out selected as D3 domain pendclear source, PMRx register to be set to 1 */
#endif
#if defined (LPTIM5)
#define EXTI_D3_PENDCLR_SRC_LPTIM5 0x00000004U /*!< LPTIM5 out selected as D3 domain pendclear source, PMRx register to be set to 1 */
#else
#define EXTI_D3_PENDCLR_SRC_LPTIM3 0x00000004U /*!< LPTIM3 out selected as D3 domain pendclear source, PMRx register to be set to 1 */
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
* @{
*/
/**
* @}
*/
/* Private constants --------------------------------------------------------*/
/** @defgroup EXTI_Private_Constants EXTI Private Constants
* @{
*/
/**
* @brief EXTI Line property definition
*/
#define EXTI_PROPERTY_SHIFT 24U
#define EXTI_DIRECT (0x01UL << EXTI_PROPERTY_SHIFT)
#define EXTI_CONFIG (0x02UL << EXTI_PROPERTY_SHIFT)
#define EXTI_GPIO ((0x04UL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
#define EXTI_RESERVED (0x08UL << EXTI_PROPERTY_SHIFT)
#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
/**
* @brief EXTI Event presence definition
*/
#define EXTI_EVENT_PRESENCE_SHIFT 28U
#define EXTI_EVENT (0x01UL << EXTI_EVENT_PRESENCE_SHIFT)
#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT)
/**
* @brief EXTI Register and bit usage
*/
#define EXTI_REG_SHIFT 16U
#define EXTI_REG1 (0x00UL << EXTI_REG_SHIFT)
#define EXTI_REG2 (0x01UL << EXTI_REG_SHIFT)
#define EXTI_REG3 (0x02UL << EXTI_REG_SHIFT)
#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2 | EXTI_REG3)
#define EXTI_PIN_MASK 0x0000001FUL
/**
* @brief EXTI Target and bit usage
*/
#define EXTI_TARGET_SHIFT 20U
#define EXTI_TARGET_MSK_NONE (0x00UL << EXTI_TARGET_SHIFT)
#define EXTI_TARGET_MSK_D3SRD (0x01UL << EXTI_TARGET_SHIFT)
#define EXTI_TARGET_MSK_CPU1 (0x02UL << EXTI_TARGET_SHIFT)
#if defined (DUAL_CORE)
#define EXTI_TARGET_MSK_CPU2 (0x04UL << EXTI_TARGET_SHIFT)
#define EXTI_TARGET_MASK (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2)
#define EXTI_TARGET_MSK_ALL_CPU (EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2)
#else
#define EXTI_TARGET_MASK (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1)
#define EXTI_TARGET_MSK_ALL_CPU EXTI_TARGET_MSK_CPU1
#endif /* DUAL_CORE */
#define EXTI_TARGET_MSK_ALL EXTI_TARGET_MASK
/**
* @brief EXTI Mask for interrupt & event mode
*/
#if defined (DUAL_CORE)
#define EXTI_MODE_MASK (EXTI_MODE_CORE1_EVENT | EXTI_MODE_CORE1_INTERRUPT | EXTI_MODE_CORE2_INTERRUPT | EXTI_MODE_CORE2_EVENT)
#else
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
#endif /* DUAL_CORE */
/**
* @brief EXTI Mask for trigger possibilities
*/
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
/**
* @brief EXTI Line number
*/
#if (STM32H7_DEV_ID == 0x483UL)
#define EXTI_LINE_NB 92UL
#elif (STM32H7_DEV_ID == 0x480UL)
#define EXTI_LINE_NB 89UL
#else
#define EXTI_LINE_NB 88UL
#endif /* EXTI_LINE_91 */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup EXTI_Private_Macros EXTI Private Macros
* @{
*/
#define IS_EXTI_PROPERTY(__LINE__) ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \
(((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
(((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))
#if defined (DUAL_CORE)
#define IS_EXTI_TARGET(__LINE__) ((((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1) || \
(((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU2) || \
(((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL_CPU) || \
(((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL))
#else
#define IS_EXTI_TARGET(__LINE__) ((((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1) || \
(((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL))
#endif
#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK | EXTI_TARGET_MASK)) == 0x00UL) && \
IS_EXTI_PROPERTY(__LINE__) && IS_EXTI_TARGET(__LINE__) && \
(((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \
(((EXTI_LINE_NB / 32UL) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32UL))))
#define IS_EXTI_MODE(__MODE__) (((__MODE__) & ~EXTI_MODE_MASK) == 0x00UL)
#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00UL)
#define IS_EXTI_PENDING_EDGE(__LINE__) (((__LINE__) == EXTI_TRIGGER_RISING) || \
((__LINE__) == EXTI_TRIGGER_FALLING)|| \
((__LINE__) == EXTI_TRIGGER_RISING_FALLING))
#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00UL)
#if defined(GPIOI)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF) || \
((__PORT__) == EXTI_GPIOG) || \
((__PORT__) == EXTI_GPIOH) || \
((__PORT__) == EXTI_GPIOI) || \
((__PORT__) == EXTI_GPIOJ) || \
((__PORT__) == EXTI_GPIOK))
#else
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOE) || \
((__PORT__) == EXTI_GPIOF) || \
((__PORT__) == EXTI_GPIOG) || \
((__PORT__) == EXTI_GPIOH) || \
((__PORT__) == EXTI_GPIOJ) || \
((__PORT__) == EXTI_GPIOK))
#endif /*GPIOI*/
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16UL)
#if defined (LPTIM4) && defined (LPTIM5)
#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM4) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM5))
#else
#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM2) || \
((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM3))
#endif /* LPTIM4 && LPTIM5 */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
* @brief EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
* @brief Configuration functions
* @{
*/
/* Configuration functions ****************************************************/
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
/**
* @}
*/
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
* @{
*/
/* IO operation functions *****************************************************/
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

864
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h Normal file
View File

@@ -0,0 +1,864 @@
/**
******************************************************************************
* @file stm32h7xx_hal_flash.h
* @author MCD Application Team
* @brief Header file of FLASH HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_FLASH_H
#define STM32H7xx_HAL_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Procedure structure definition
*/
typedef enum
{
FLASH_PROC_NONE = 0U,
FLASH_PROC_SECTERASE_BANK1,
FLASH_PROC_MASSERASE_BANK1,
FLASH_PROC_PROGRAM_BANK1,
FLASH_PROC_SECTERASE_BANK2,
FLASH_PROC_MASSERASE_BANK2,
FLASH_PROC_PROGRAM_BANK2,
FLASH_PROC_ALLBANK_MASSERASE
} FLASH_ProcedureTypeDef;
/**
* @brief FLASH handle Structure definition
*/
typedef struct
{
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
__IO uint32_t NbSectorsToErase; /*!< Internal variable to save the remaining sectors to erase in IT context */
__IO uint32_t VoltageForErase; /*!< Internal variable to provide voltage range selected by user in IT context */
__IO uint32_t Sector; /*!< Internal variable to define the current sector which is erasing */
__IO uint32_t Address; /*!< Internal variable to save address selected for program */
HAL_LockTypeDef Lock; /*!< FLASH locking object */
__IO uint32_t ErrorCode; /*!< FLASH error code */
}FLASH_ProcessTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASH_Error_Code FLASH Error Code
* @brief FLASH Error Code
* @{
*/
#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR /*!< Write Protection Error */
#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR /*!< Program Sequence Error */
#define HAL_FLASH_ERROR_STRB FLASH_FLAG_STRBERR /*!< Strobe Error */
#define HAL_FLASH_ERROR_INC FLASH_FLAG_INCERR /*!< Inconsistency Error */
#if defined (FLASH_SR_OPERR)
#define HAL_FLASH_ERROR_OPE FLASH_FLAG_OPERR /*!< Operation Error */
#endif /* FLASH_SR_OPERR */
#define HAL_FLASH_ERROR_RDP FLASH_FLAG_RDPERR /*!< Read Protection Error */
#define HAL_FLASH_ERROR_RDS FLASH_FLAG_RDSERR /*!< Read Secured Error */
#define HAL_FLASH_ERROR_SNECC FLASH_FLAG_SNECCERR /*!< ECC Single Correction Error */
#define HAL_FLASH_ERROR_DBECC FLASH_FLAG_DBECCERR /*!< ECC Double Detection Error */
#define HAL_FLASH_ERROR_CRCRD FLASH_FLAG_CRCRDERR /*!< CRC Read Error */
#define HAL_FLASH_ERROR_WRP_BANK1 FLASH_FLAG_WRPERR_BANK1 /*!< Write Protection Error on Bank 1 */
#define HAL_FLASH_ERROR_PGS_BANK1 FLASH_FLAG_PGSERR_BANK1 /*!< Program Sequence Error on Bank 1 */
#define HAL_FLASH_ERROR_STRB_BANK1 FLASH_FLAG_STRBERR_BANK1 /*!< Strobe Error on Bank 1 */
#define HAL_FLASH_ERROR_INC_BANK1 FLASH_FLAG_INCERR_BANK1 /*!< Inconsistency Error on Bank 1 */
#if defined (FLASH_SR_OPERR)
#define HAL_FLASH_ERROR_OPE_BANK1 FLASH_FLAG_OPERR_BANK1 /*!< Operation Error on Bank 1 */
#endif /* FLASH_SR_OPERR */
#define HAL_FLASH_ERROR_RDP_BANK1 FLASH_FLAG_RDPERR_BANK1 /*!< Read Protection Error on Bank 1 */
#define HAL_FLASH_ERROR_RDS_BANK1 FLASH_FLAG_RDSERR_BANK1 /*!< Read Secured Error on Bank 1 */
#define HAL_FLASH_ERROR_SNECC_BANK1 FLASH_FLAG_SNECCERR_BANK1 /*!< ECC Single Correction Error on Bank 1 */
#define HAL_FLASH_ERROR_DBECC_BANK1 FLASH_FLAG_DBECCERR_BANK1 /*!< ECC Double Detection Error on Bank 1 */
#define HAL_FLASH_ERROR_CRCRD_BANK1 FLASH_FLAG_CRCRDERR_BANK1 /*!< CRC Read Error on Bank1 */
#define HAL_FLASH_ERROR_WRP_BANK2 FLASH_FLAG_WRPERR_BANK2 /*!< Write Protection Error on Bank 2 */
#define HAL_FLASH_ERROR_PGS_BANK2 FLASH_FLAG_PGSERR_BANK2 /*!< Program Sequence Error on Bank 2 */
#define HAL_FLASH_ERROR_STRB_BANK2 FLASH_FLAG_STRBERR_BANK2 /*!< Strobe Error on Bank 2 */
#define HAL_FLASH_ERROR_INC_BANK2 FLASH_FLAG_INCERR_BANK2 /*!< Inconsistency Error on Bank 2 */
#if defined (FLASH_SR_OPERR)
#define HAL_FLASH_ERROR_OPE_BANK2 FLASH_FLAG_OPERR_BANK2 /*!< Operation Error on Bank 2 */
#endif /* FLASH_SR_OPERR */
#define HAL_FLASH_ERROR_RDP_BANK2 FLASH_FLAG_RDPERR_BANK2 /*!< Read Protection Error on Bank 2 */
#define HAL_FLASH_ERROR_RDS_BANK2 FLASH_FLAG_RDSERR_BANK2 /*!< Read Secured Error on Bank 2 */
#define HAL_FLASH_ERROR_SNECC_BANK2 FLASH_FLAG_SNECCERR_BANK2 /*!< ECC Single Correction Error on Bank 2 */
#define HAL_FLASH_ERROR_DBECC_BANK2 FLASH_FLAG_DBECCERR_BANK2 /*!< ECC Double Detection Error on Bank 2 */
#define HAL_FLASH_ERROR_CRCRD_BANK2 FLASH_FLAG_CRCRDERR_BANK2 /*!< CRC Read Error on Bank2 */
#define HAL_FLASH_ERROR_OB_CHANGE FLASH_OPTSR_OPTCHANGEERR /*!< Option Byte Change Error */
/**
* @}
*/
/** @defgroup FLASH_Type_Program FLASH Type Program
* @{
*/
#define FLASH_TYPEPROGRAM_FLASHWORD 0x01U /*!< Program a flash word at a specified address */
#if defined (FLASH_OPTCR_PG_OTP)
#define FLASH_TYPEPROGRAM_OTPWORD 0x02U /*!< Program an OTP word at a specified address */
#endif /* FLASH_OPTCR_PG_OTP */
/**
* @}
*/
/** @defgroup FLASH_Flag_definition FLASH Flag definition
* @brief Flag definition
* @{
*/
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
#define FLASH_FLAG_WBNE FLASH_SR_WBNE /*!< Write Buffer Not Empty flag */
#define FLASH_FLAG_QW FLASH_SR_QW /*!< Wait Queue on flag */
#define FLASH_FLAG_CRC_BUSY FLASH_SR_CRC_BUSY /*!< CRC Busy flag */
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< End Of Program on flag */
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< Write Protection Error on flag */
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< Program Sequence Error on flag */
#define FLASH_FLAG_STRBERR FLASH_SR_STRBERR /*!< Strobe Error flag */
#define FLASH_FLAG_INCERR FLASH_SR_INCERR /*!< Inconsistency Error on flag */
#if defined (FLASH_SR_OPERR)
#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< Operation Error on flag */
#endif /* FLASH_SR_OPERR */
#define FLASH_FLAG_RDPERR FLASH_SR_RDPERR /*!< Read Protection Error on flag */
#define FLASH_FLAG_RDSERR FLASH_SR_RDSERR /*!< Read Secured Error on flag */
#define FLASH_FLAG_SNECCERR FLASH_SR_SNECCERR /*!< Single ECC Error Correction on flag */
#define FLASH_FLAG_DBECCERR FLASH_SR_DBECCERR /*!< Double Detection ECC Error on flag */
#define FLASH_FLAG_CRCEND FLASH_SR_CRCEND /*!< CRC End of Calculation flag */
#define FLASH_FLAG_CRCRDERR FLASH_SR_CRCRDERR /*!< CRC Read Error on bank flag */
#define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank 1 Busy flag */
#define FLASH_FLAG_WBNE_BANK1 FLASH_SR_WBNE /*!< Write Buffer Not Empty on Bank 1 flag */
#define FLASH_FLAG_QW_BANK1 FLASH_SR_QW /*!< Wait Queue on Bank 1 flag */
#define FLASH_FLAG_CRC_BUSY_BANK1 FLASH_SR_CRC_BUSY /*!< CRC Busy on Bank 1 flag */
#define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< End Of Program on Bank 1 flag */
#define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPERR /*!< Write Protection Error on Bank 1 flag */
#define FLASH_FLAG_PGSERR_BANK1 FLASH_SR_PGSERR /*!< Program Sequence Error on Bank 1 flag */
#define FLASH_FLAG_STRBERR_BANK1 FLASH_SR_STRBERR /*!< Strobe Error on Bank 1 flag */
#define FLASH_FLAG_INCERR_BANK1 FLASH_SR_INCERR /*!< Inconsistency Error on Bank 1 flag */
#if defined (FLASH_SR_OPERR)
#define FLASH_FLAG_OPERR_BANK1 FLASH_SR_OPERR /*!< Operation Error on Bank 1 flag */
#endif /* FLASH_SR_OPERR */
#define FLASH_FLAG_RDPERR_BANK1 FLASH_SR_RDPERR /*!< Read Protection Error on Bank 1 flag */
#define FLASH_FLAG_RDSERR_BANK1 FLASH_SR_RDSERR /*!< Read Secured Error on Bank 1 flag */
#define FLASH_FLAG_SNECCERR_BANK1 FLASH_SR_SNECCERR /*!< Single ECC Error Correction on Bank 1 flag */
#define FLASH_FLAG_DBECCERR_BANK1 FLASH_SR_DBECCERR /*!< Double Detection ECC Error on Bank 1 flag */
#define FLASH_FLAG_CRCEND_BANK1 FLASH_SR_CRCEND /*!< CRC End of Calculation on Bank 1 flag */
#define FLASH_FLAG_CRCRDERR_BANK1 FLASH_SR_CRCRDERR /*!< CRC Read error on Bank 1 flag */
#if defined (FLASH_SR_OPERR)
#define FLASH_FLAG_ALL_ERRORS_BANK1 (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | \
FLASH_FLAG_STRBERR_BANK1 | FLASH_FLAG_INCERR_BANK1 | \
FLASH_FLAG_OPERR_BANK1 | FLASH_FLAG_RDPERR_BANK1 | \
FLASH_FLAG_RDSERR_BANK1 | FLASH_FLAG_SNECCERR_BANK1 | \
FLASH_FLAG_DBECCERR_BANK1 | FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */
#else
#define FLASH_FLAG_ALL_ERRORS_BANK1 (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | \
FLASH_FLAG_STRBERR_BANK1 | FLASH_FLAG_INCERR_BANK1 | \
FLASH_FLAG_RDPERR_BANK1 | FLASH_FLAG_RDSERR_BANK1 | \
FLASH_FLAG_SNECCERR_BANK1 | FLASH_FLAG_DBECCERR_BANK1 | \
FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */
#endif /* FLASH_SR_OPERR */
#define FLASH_FLAG_ALL_BANK1 (FLASH_FLAG_BSY_BANK1 | FLASH_FLAG_WBNE_BANK1 | \
FLASH_FLAG_QW_BANK1 | FLASH_FLAG_CRC_BUSY_BANK1 | \
FLASH_FLAG_EOP_BANK1 | FLASH_FLAG_CRCEND_BANK1 | \
FLASH_FLAG_ALL_ERRORS_BANK1) /*!< All Bank 1 flags */
#define FLASH_FLAG_BSY_BANK2 (FLASH_SR_BSY | 0x80000000U) /*!< FLASH Bank 2 Busy flag */
#define FLASH_FLAG_WBNE_BANK2 (FLASH_SR_WBNE | 0x80000000U) /*!< Write Buffer Not Empty on Bank 2 flag */
#define FLASH_FLAG_QW_BANK2 (FLASH_SR_QW | 0x80000000U) /*!< Wait Queue on Bank 2 flag */
#define FLASH_FLAG_CRC_BUSY_BANK2 (FLASH_SR_CRC_BUSY | 0x80000000U) /*!< CRC Busy on Bank 2 flag */
#define FLASH_FLAG_EOP_BANK2 (FLASH_SR_EOP | 0x80000000U) /*!< End Of Program on Bank 2 flag */
#define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR_WRPERR | 0x80000000U) /*!< Write Protection Error on Bank 2 flag */
#define FLASH_FLAG_PGSERR_BANK2 (FLASH_SR_PGSERR | 0x80000000U) /*!< Program Sequence Error on Bank 2 flag */
#define FLASH_FLAG_STRBERR_BANK2 (FLASH_SR_STRBERR | 0x80000000U) /*!< Strobe Error on Bank 2 flag */
#define FLASH_FLAG_INCERR_BANK2 (FLASH_SR_INCERR | 0x80000000U) /*!< Inconsistency Error on Bank 2 flag */
#if defined (FLASH_SR_OPERR)
#define FLASH_FLAG_OPERR_BANK2 (FLASH_SR_OPERR | 0x80000000U) /*!< Operation Error on Bank 2 flag */
#endif /* FLASH_SR_OPERR */
#define FLASH_FLAG_RDPERR_BANK2 (FLASH_SR_RDPERR | 0x80000000U) /*!< Read Protection Error on Bank 2 flag */
#define FLASH_FLAG_RDSERR_BANK2 (FLASH_SR_RDSERR | 0x80000000U) /*!< Read Secured Error on Bank 2 flag */
#define FLASH_FLAG_SNECCERR_BANK2 (FLASH_SR_SNECCERR | 0x80000000U) /*!< Single ECC Error Correction on Bank 2 flag */
#define FLASH_FLAG_DBECCERR_BANK2 (FLASH_SR_DBECCERR | 0x80000000U) /*!< Double Detection ECC Error on Bank 2 flag */
#define FLASH_FLAG_CRCEND_BANK2 (FLASH_SR_CRCEND | 0x80000000U) /*!< CRC End of Calculation on Bank 2 flag */
#define FLASH_FLAG_CRCRDERR_BANK2 (FLASH_SR_CRCRDERR | 0x80000000U) /*!< CRC Read error on Bank 2 flag */
#if defined (FLASH_SR_OPERR)
#define FLASH_FLAG_ALL_ERRORS_BANK2 (FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | \
FLASH_FLAG_STRBERR_BANK2 | FLASH_FLAG_INCERR_BANK2 | \
FLASH_FLAG_OPERR_BANK2 | FLASH_FLAG_RDPERR_BANK2 | \
FLASH_FLAG_RDSERR_BANK2 | FLASH_FLAG_SNECCERR_BANK2 | \
FLASH_FLAG_DBECCERR_BANK2 | FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */
#else
#define FLASH_FLAG_ALL_ERRORS_BANK2 (FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | \
FLASH_FLAG_STRBERR_BANK2 | FLASH_FLAG_INCERR_BANK2 | \
FLASH_FLAG_RDPERR_BANK2 | FLASH_FLAG_RDSERR_BANK2 | \
FLASH_FLAG_SNECCERR_BANK2 | FLASH_FLAG_DBECCERR_BANK2 | \
FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */
#endif /* FLASH_SR_OPERR */
#define FLASH_FLAG_ALL_BANK2 (FLASH_FLAG_BSY_BANK2 | FLASH_FLAG_WBNE_BANK2 | \
FLASH_FLAG_QW_BANK2 | FLASH_FLAG_CRC_BUSY_BANK2 | \
FLASH_FLAG_EOP_BANK2 | FLASH_FLAG_CRCEND_BANK2 | \
FLASH_FLAG_ALL_ERRORS_BANK2) /*!< All Bank 2 flags */
/**
* @}
*/
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
* @brief FLASH Interrupt definition
* @{
*/
#define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Bank 1 Operation Interrupt source */
#define FLASH_IT_WRPERR_BANK1 FLASH_CR_WRPERRIE /*!< Write Protection Error on Bank 1 Interrupt source */
#define FLASH_IT_PGSERR_BANK1 FLASH_CR_PGSERRIE /*!< Program Sequence Error on Bank 1 Interrupt source */
#define FLASH_IT_STRBERR_BANK1 FLASH_CR_STRBERRIE /*!< Strobe Error on Bank 1 Interrupt source */
#define FLASH_IT_INCERR_BANK1 FLASH_CR_INCERRIE /*!< Inconsistency Error on Bank 1 Interrupt source */
#if defined (FLASH_CR_OPERRIE)
#define FLASH_IT_OPERR_BANK1 FLASH_CR_OPERRIE /*!< Operation Error on Bank 1 Interrupt source */
#endif /* FLASH_CR_OPERRIE */
#define FLASH_IT_RDPERR_BANK1 FLASH_CR_RDPERRIE /*!< Read protection Error on Bank 1 Interrupt source */
#define FLASH_IT_RDSERR_BANK1 FLASH_CR_RDSERRIE /*!< Read Secured Error on Bank 1 Interrupt source */
#define FLASH_IT_SNECCERR_BANK1 FLASH_CR_SNECCERRIE /*!< Single ECC Error Correction on Bank 1 Interrupt source */
#define FLASH_IT_DBECCERR_BANK1 FLASH_CR_DBECCERRIE /*!< Double Detection ECC Error on Bank 1 Interrupt source */
#define FLASH_IT_CRCEND_BANK1 FLASH_CR_CRCENDIE /*!< CRC End on Bank 1 Interrupt source */
#define FLASH_IT_CRCRDERR_BANK1 FLASH_CR_CRCRDERRIE /*!< CRC Read error on Bank 1 Interrupt source */
#if defined (FLASH_CR_OPERRIE)
#define FLASH_IT_ALL_BANK1 (FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | \
FLASH_IT_PGSERR_BANK1 | FLASH_IT_STRBERR_BANK1 | \
FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1 | \
FLASH_IT_RDPERR_BANK1 | FLASH_IT_RDSERR_BANK1 | \
FLASH_IT_SNECCERR_BANK1 | FLASH_IT_DBECCERR_BANK1 | \
FLASH_IT_CRCEND_BANK1 | FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */
#else
#define FLASH_IT_ALL_BANK1 (FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | \
FLASH_IT_PGSERR_BANK1 | FLASH_IT_STRBERR_BANK1 | \
FLASH_IT_INCERR_BANK1 | FLASH_IT_RDPERR_BANK1 | \
FLASH_IT_RDSERR_BANK1 | FLASH_IT_SNECCERR_BANK1 | \
FLASH_IT_DBECCERR_BANK1 | FLASH_IT_CRCEND_BANK1 | \
FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */
#endif /* FLASH_CR_OPERRIE */
#define FLASH_IT_EOP_BANK2 (FLASH_CR_EOPIE | 0x80000000U) /*!< End of FLASH Bank 2 Operation Interrupt source */
#define FLASH_IT_WRPERR_BANK2 (FLASH_CR_WRPERRIE | 0x80000000U) /*!< Write Protection Error on Bank 2 Interrupt source */
#define FLASH_IT_PGSERR_BANK2 (FLASH_CR_PGSERRIE | 0x80000000U) /*!< Program Sequence Error on Bank 2 Interrupt source */
#define FLASH_IT_STRBERR_BANK2 (FLASH_CR_STRBERRIE | 0x80000000U) /*!< Strobe Error on Bank 2 Interrupt source */
#define FLASH_IT_INCERR_BANK2 (FLASH_CR_INCERRIE | 0x80000000U) /*!< Inconsistency Error on Bank 2 Interrupt source */
#if defined (FLASH_CR_OPERRIE)
#define FLASH_IT_OPERR_BANK2 (FLASH_CR_OPERRIE | 0x80000000U) /*!< Operation Error on Bank 2 Interrupt source */
#endif /* FLASH_CR_OPERRIE */
#define FLASH_IT_RDPERR_BANK2 (FLASH_CR_RDPERRIE | 0x80000000U) /*!< Read protection Error on Bank 2 Interrupt source */
#define FLASH_IT_RDSERR_BANK2 (FLASH_CR_RDSERRIE | 0x80000000U) /*!< Read Secured Error on Bank 2 Interrupt source */
#define FLASH_IT_SNECCERR_BANK2 (FLASH_CR_SNECCERRIE | 0x80000000U) /*!< Single ECC Error Correction on Bank 2 Interrupt source */
#define FLASH_IT_DBECCERR_BANK2 (FLASH_CR_DBECCERRIE | 0x80000000U) /*!< Double Detection ECC Error on Bank 2 Interrupt source */
#define FLASH_IT_CRCEND_BANK2 (FLASH_CR_CRCENDIE | 0x80000000U) /*!< CRC End on Bank 2 Interrupt source */
#define FLASH_IT_CRCRDERR_BANK2 (FLASH_CR_CRCRDERRIE | 0x80000000U) /*!< CRC Read Error on Bank 2 Interrupt source */
#if defined (FLASH_CR_OPERRIE)
#define FLASH_IT_ALL_BANK2 (FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | \
FLASH_IT_PGSERR_BANK2 | FLASH_IT_STRBERR_BANK2 | \
FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2 | \
FLASH_IT_RDPERR_BANK2 | FLASH_IT_RDSERR_BANK2 | \
FLASH_IT_SNECCERR_BANK2 | FLASH_IT_DBECCERR_BANK2 | \
FLASH_IT_CRCEND_BANK2 | FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */
#else
#define FLASH_IT_ALL_BANK2 (FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | \
FLASH_IT_PGSERR_BANK2 | FLASH_IT_STRBERR_BANK2 | \
FLASH_IT_INCERR_BANK2 | FLASH_IT_RDPERR_BANK2 | \
FLASH_IT_RDSERR_BANK2 | FLASH_IT_SNECCERR_BANK2 | \
FLASH_IT_DBECCERR_BANK2 | FLASH_IT_CRCEND_BANK2 | \
FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */
#endif /* FLASH_CR_OPERRIE */
/**
* @}
*/
#if defined (FLASH_CR_PSIZE)
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
* @{
*/
#define FLASH_PSIZE_BYTE 0x00000000U /*!< Flash program/erase by 8 bits */
#define FLASH_PSIZE_HALF_WORD FLASH_CR_PSIZE_0 /*!< Flash program/erase by 16 bits */
#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1 /*!< Flash program/erase by 32 bits */
#define FLASH_PSIZE_DOUBLE_WORD FLASH_CR_PSIZE /*!< Flash program/erase by 64 bits */
/**
* @}
*/
#endif /* FLASH_CR_PSIZE */
/** @defgroup FLASH_Keys FLASH Keys
* @{
*/
#define FLASH_KEY1 0x45670123U
#define FLASH_KEY2 0xCDEF89ABU
#define FLASH_OPT_KEY1 0x08192A3BU
#define FLASH_OPT_KEY2 0x4C5D6E7FU
/**
* @}
*/
/** @defgroup FLASH_Sectors FLASH Sectors
* @{
*/
#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */
#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */
#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */
#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */
#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */
#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */
#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */
#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */
#if (FLASH_SECTOR_TOTAL == 128)
#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */
#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */
#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */
#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */
#define FLASH_SECTOR_12 12U /*!< Sector Number 12 */
#define FLASH_SECTOR_13 13U /*!< Sector Number 13 */
#define FLASH_SECTOR_14 14U /*!< Sector Number 14 */
#define FLASH_SECTOR_15 15U /*!< Sector Number 15 */
#define FLASH_SECTOR_16 16U /*!< Sector Number 16 */
#define FLASH_SECTOR_17 17U /*!< Sector Number 17 */
#define FLASH_SECTOR_18 18U /*!< Sector Number 18 */
#define FLASH_SECTOR_19 19U /*!< Sector Number 19 */
#define FLASH_SECTOR_20 20U /*!< Sector Number 20 */
#define FLASH_SECTOR_21 21U /*!< Sector Number 21 */
#define FLASH_SECTOR_22 22U /*!< Sector Number 22 */
#define FLASH_SECTOR_23 23U /*!< Sector Number 23 */
#define FLASH_SECTOR_24 24U /*!< Sector Number 24 */
#define FLASH_SECTOR_25 25U /*!< Sector Number 25 */
#define FLASH_SECTOR_26 26U /*!< Sector Number 26 */
#define FLASH_SECTOR_27 27U /*!< Sector Number 27 */
#define FLASH_SECTOR_28 28U /*!< Sector Number 28 */
#define FLASH_SECTOR_29 29U /*!< Sector Number 29 */
#define FLASH_SECTOR_30 30U /*!< Sector Number 30 */
#define FLASH_SECTOR_31 31U /*!< Sector Number 31 */
#define FLASH_SECTOR_32 32U /*!< Sector Number 32 */
#define FLASH_SECTOR_33 33U /*!< Sector Number 33 */
#define FLASH_SECTOR_34 34U /*!< Sector Number 34 */
#define FLASH_SECTOR_35 35U /*!< Sector Number 35 */
#define FLASH_SECTOR_36 36U /*!< Sector Number 36 */
#define FLASH_SECTOR_37 37U /*!< Sector Number 37 */
#define FLASH_SECTOR_38 38U /*!< Sector Number 38 */
#define FLASH_SECTOR_39 39U /*!< Sector Number 39 */
#define FLASH_SECTOR_40 40U /*!< Sector Number 40 */
#define FLASH_SECTOR_41 41U /*!< Sector Number 41 */
#define FLASH_SECTOR_42 42U /*!< Sector Number 42 */
#define FLASH_SECTOR_43 43U /*!< Sector Number 43 */
#define FLASH_SECTOR_44 44U /*!< Sector Number 44 */
#define FLASH_SECTOR_45 45U /*!< Sector Number 45 */
#define FLASH_SECTOR_46 46U /*!< Sector Number 46 */
#define FLASH_SECTOR_47 47U /*!< Sector Number 47 */
#define FLASH_SECTOR_48 48U /*!< Sector Number 48 */
#define FLASH_SECTOR_49 49U /*!< Sector Number 49 */
#define FLASH_SECTOR_50 50U /*!< Sector Number 50 */
#define FLASH_SECTOR_51 51U /*!< Sector Number 51 */
#define FLASH_SECTOR_52 52U /*!< Sector Number 52 */
#define FLASH_SECTOR_53 53U /*!< Sector Number 53 */
#define FLASH_SECTOR_54 54U /*!< Sector Number 54 */
#define FLASH_SECTOR_55 55U /*!< Sector Number 55 */
#define FLASH_SECTOR_56 56U /*!< Sector Number 56 */
#define FLASH_SECTOR_57 57U /*!< Sector Number 57 */
#define FLASH_SECTOR_58 58U /*!< Sector Number 58 */
#define FLASH_SECTOR_59 59U /*!< Sector Number 59 */
#define FLASH_SECTOR_60 60U /*!< Sector Number 60 */
#define FLASH_SECTOR_61 61U /*!< Sector Number 61 */
#define FLASH_SECTOR_62 62U /*!< Sector Number 62 */
#define FLASH_SECTOR_63 63U /*!< Sector Number 63 */
#define FLASH_SECTOR_64 64U /*!< Sector Number 64 */
#define FLASH_SECTOR_65 65U /*!< Sector Number 65 */
#define FLASH_SECTOR_66 66U /*!< Sector Number 66 */
#define FLASH_SECTOR_67 67U /*!< Sector Number 67 */
#define FLASH_SECTOR_68 68U /*!< Sector Number 68 */
#define FLASH_SECTOR_69 69U /*!< Sector Number 69 */
#define FLASH_SECTOR_70 70U /*!< Sector Number 70 */
#define FLASH_SECTOR_71 71U /*!< Sector Number 71 */
#define FLASH_SECTOR_72 72U /*!< Sector Number 72 */
#define FLASH_SECTOR_73 73U /*!< Sector Number 73 */
#define FLASH_SECTOR_74 74U /*!< Sector Number 74 */
#define FLASH_SECTOR_75 75U /*!< Sector Number 75 */
#define FLASH_SECTOR_76 76U /*!< Sector Number 76 */
#define FLASH_SECTOR_77 77U /*!< Sector Number 77 */
#define FLASH_SECTOR_78 78U /*!< Sector Number 78 */
#define FLASH_SECTOR_79 79U /*!< Sector Number 79 */
#define FLASH_SECTOR_80 80U /*!< Sector Number 80 */
#define FLASH_SECTOR_81 81U /*!< Sector Number 81 */
#define FLASH_SECTOR_82 82U /*!< Sector Number 82 */
#define FLASH_SECTOR_83 83U /*!< Sector Number 83 */
#define FLASH_SECTOR_84 84U /*!< Sector Number 84 */
#define FLASH_SECTOR_85 85U /*!< Sector Number 85 */
#define FLASH_SECTOR_86 86U /*!< Sector Number 86 */
#define FLASH_SECTOR_87 87U /*!< Sector Number 87 */
#define FLASH_SECTOR_88 88U /*!< Sector Number 88 */
#define FLASH_SECTOR_89 89U /*!< Sector Number 89 */
#define FLASH_SECTOR_90 90U /*!< Sector Number 90 */
#define FLASH_SECTOR_91 91U /*!< Sector Number 91 */
#define FLASH_SECTOR_92 92U /*!< Sector Number 92 */
#define FLASH_SECTOR_93 93U /*!< Sector Number 93 */
#define FLASH_SECTOR_94 94U /*!< Sector Number 94 */
#define FLASH_SECTOR_95 95U /*!< Sector Number 95 */
#define FLASH_SECTOR_96 96U /*!< Sector Number 96 */
#define FLASH_SECTOR_97 97U /*!< Sector Number 97 */
#define FLASH_SECTOR_98 98U /*!< Sector Number 98 */
#define FLASH_SECTOR_99 99U /*!< Sector Number 99 */
#define FLASH_SECTOR_100 100U /*!< Sector Number 100 */
#define FLASH_SECTOR_101 101U /*!< Sector Number 101 */
#define FLASH_SECTOR_102 102U /*!< Sector Number 102 */
#define FLASH_SECTOR_103 103U /*!< Sector Number 103 */
#define FLASH_SECTOR_104 104U /*!< Sector Number 104 */
#define FLASH_SECTOR_105 105U /*!< Sector Number 105 */
#define FLASH_SECTOR_106 106U /*!< Sector Number 106 */
#define FLASH_SECTOR_107 107U /*!< Sector Number 107 */
#define FLASH_SECTOR_108 108U /*!< Sector Number 108 */
#define FLASH_SECTOR_109 109U /*!< Sector Number 109 */
#define FLASH_SECTOR_110 110U /*!< Sector Number 110 */
#define FLASH_SECTOR_111 111U /*!< Sector Number 111 */
#define FLASH_SECTOR_112 112U /*!< Sector Number 112 */
#define FLASH_SECTOR_113 113U /*!< Sector Number 113 */
#define FLASH_SECTOR_114 114U /*!< Sector Number 114 */
#define FLASH_SECTOR_115 115U /*!< Sector Number 115 */
#define FLASH_SECTOR_116 116U /*!< Sector Number 116 */
#define FLASH_SECTOR_117 117U /*!< Sector Number 117 */
#define FLASH_SECTOR_118 118U /*!< Sector Number 118 */
#define FLASH_SECTOR_119 119U /*!< Sector Number 119 */
#define FLASH_SECTOR_120 120U /*!< Sector Number 120 */
#define FLASH_SECTOR_121 121U /*!< Sector Number 121 */
#define FLASH_SECTOR_122 122U /*!< Sector Number 122 */
#define FLASH_SECTOR_123 123U /*!< Sector Number 123 */
#define FLASH_SECTOR_124 124U /*!< Sector Number 124 */
#define FLASH_SECTOR_125 125U /*!< Sector Number 125 */
#define FLASH_SECTOR_126 126U /*!< Sector Number 126 */
#define FLASH_SECTOR_127 127U /*!< Sector Number 127 */
#endif /* FLASH_SECTOR_TOTAL == 128 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
* @{
*/
/**
* @brief Set the FLASH Latency.
* @param __LATENCY__: FLASH Latency
* The value of this parameter depend on device used within the same series
* @retval none
*/
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
/**
* @brief Get the FLASH Latency.
* @retval FLASH Latency
* The value of this parameter depend on device used within the same series
*/
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
/**
* @brief Enable the specified FLASH interrupt.
* @param __INTERRUPT__ : FLASH interrupt
* In case of Bank 1 This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP_BANK1 : End of FLASH Bank 1 Operation Interrupt source
* @arg FLASH_IT_WRPERR_BANK1 : Write Protection Error on Bank 1 Interrupt source
* @arg FLASH_IT_PGSERR_BANK1 : Program Sequence Error on Bank 1 Interrupt source
* @arg FLASH_IT_STRBERR_BANK1 : Strobe Error on Bank 1 Interrupt source
* @arg FLASH_IT_INCERR_BANK1 : Inconsistency Error on Bank 1 Interrupt source
* @arg FLASH_IT_OPERR_BANK1 : Operation Error on Bank 1 Interrupt source
* @arg FLASH_IT_RDPERR_BANK1 : Read protection Error on Bank 1 Interrupt source
* @arg FLASH_IT_RDSERR_BANK1 : Read secure Error on Bank 1 Interrupt source
* @arg FLASH_IT_SNECCERR_BANK1 : Single ECC Error Correction on Bank 1 Interrupt source
* @arg FLASH_IT_DBECCERR_BANK1 : Double Detection ECC Error on Bank 1 Interrupt source
* @arg FLASH_IT_CRCEND_BANK1 : CRC End on Bank 1 Interrupt source
* @arg FLASH_IT_CRCRDERR_BANK1 : CRC Read error on Bank 1 Interrupt source
* @arg FLASH_IT_ALL_BANK1 : All Bank 1 Interrupt sources
*
* In case of Bank 2, this parameter can be any combination of the following values:
* @arg FLASH_IT_EOP_BANK2 : End of FLASH Bank 2 Operation Interrupt source
* @arg FLASH_IT_WRPERR_BANK2 : Write Protection Error on Bank 2 Interrupt source
* @arg FLASH_IT_PGSERR_BANK2 : Program Sequence Error on Bank 2 Interrupt source
* @arg FLASH_IT_STRBERR_BANK2 : Strobe Error on Bank 2 Interrupt source
* @arg FLASH_IT_INCERR_BANK2 : Inconsistency Error on Bank 2 Interrupt source
* @arg FLASH_IT_OPERR_BANK2 : Operation Error on Bank 2 Interrupt source
* @arg FLASH_IT_RDPERR_BANK2 : Read protection Error on Bank 2 Interrupt source
* @arg FLASH_IT_RDSERR_BANK2 : Read secure Error on Bank 2 Interrupt source
* @arg FLASH_IT_SNECCERR_BANK2 : Single ECC Error Correction on Bank 2 Interrupt source
* @arg FLASH_IT_DBECCERR_BANK2 : Double Detection ECC Error on Bank 2 Interrupt source
* @arg FLASH_IT_CRCEND_BANK2 : CRC End on Bank 2 Interrupt source
* @arg FLASH_IT_CRCRDERR_BANK2 : CRC Read error on Bank 2 Interrupt source
* @arg FLASH_IT_ALL_BANK2 : All Bank 2 Interrupt sources
* @retval none
*/
#define __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) (FLASH->CR1 |= (__INTERRUPT__))
#define __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__) (FLASH->CR2 |= ((__INTERRUPT__) & 0x7FFFFFFFU))
#if defined (DUAL_BANK)
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \
__HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) : \
__HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__))
#else
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__)
#endif /* DUAL_BANK */
/**
* @brief Disable the specified FLASH interrupt.
* @param __INTERRUPT__ : FLASH interrupt
* In case of Bank 1 This parameter can be any combination of the following values:
* @arg FLASH_IT_EOP_BANK1 : End of FLASH Bank 1 Operation Interrupt source
* @arg FLASH_IT_WRPERR_BANK1 : Write Protection Error on Bank 1 Interrupt source
* @arg FLASH_IT_PGSERR_BANK1 : Program Sequence Error on Bank 1 Interrupt source
* @arg FLASH_IT_STRBERR_BANK1 : Strobe Error on Bank 1 Interrupt source
* @arg FLASH_IT_INCERR_BANK1 : Inconsistency Error on Bank 1 Interrupt source
* @arg FLASH_IT_OPERR_BANK1 : Operation Error on Bank 1 Interrupt source
* @arg FLASH_IT_RDPERR_BANK1 : Read protection Error on Bank 1 Interrupt source
* @arg FLASH_IT_RDSERR_BANK1 : Read secure Error on Bank 1 Interrupt source
* @arg FLASH_IT_SNECCERR_BANK1 : Single ECC Error Correction on Bank 1 Interrupt source
* @arg FLASH_IT_DBECCERR_BANK1 : Double Detection ECC Error on Bank 1 Interrupt source
* @arg FLASH_IT_CRCEND_BANK1 : CRC End on Bank 1 Interrupt source
* @arg FLASH_IT_CRCRDERR_BANK1 : CRC Read error on Bank 1 Interrupt source
* @arg FLASH_IT_ALL_BANK1 : All Bank 1 Interrupt sources
*
* In case of Bank 2, this parameter can be any combination of the following values:
* @arg FLASH_IT_EOP_BANK2 : End of FLASH Bank 2 Operation Interrupt source
* @arg FLASH_IT_WRPERR_BANK2 : Write Protection Error on Bank 2 Interrupt source
* @arg FLASH_IT_PGSERR_BANK2 : Program Sequence Error on Bank 2 Interrupt source
* @arg FLASH_IT_STRBERR_BANK2 : Strobe Error on Bank 2 Interrupt source
* @arg FLASH_IT_INCERR_BANK2 : Inconsistency Error on Bank 2 Interrupt source
* @arg FLASH_IT_OPERR_BANK2 : Operation Error on Bank 2 Interrupt source
* @arg FLASH_IT_RDPERR_BANK2 : Read protection Error on Bank 2 Interrupt source
* @arg FLASH_IT_RDSERR_BANK2 : Read secure Error on Bank 2 Interrupt source
* @arg FLASH_IT_SNECCERR_BANK2 : Single ECC Error Correction on Bank 2 Interrupt source
* @arg FLASH_IT_DBECCERR_BANK2 : Double Detection ECC Error on Bank 2 Interrupt source
* @arg FLASH_IT_CRCEND_BANK2 : CRC End on Bank 2 Interrupt source
* @arg FLASH_IT_CRCRDERR_BANK2 : CRC Read error on Bank 2 Interrupt source
* @arg FLASH_IT_ALL_BANK2 : All Bank 2 Interrupt sources
* @retval none
*/
#define __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) (FLASH->CR1 &= ~(uint32_t)(__INTERRUPT__))
#define __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__) (FLASH->CR2 &= ~(uint32_t)((__INTERRUPT__) & 0x7FFFFFFFU))
#if defined (DUAL_BANK)
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \
__HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) : \
__HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__))
#else
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__)
#endif /* DUAL_BANK */
/**
* @brief Checks whether the specified FLASH flag is set or not.
* @param __FLAG__: specifies the FLASH flag to check.
* In case of Bank 1 This parameter can be one of the following values :
* @arg FLASH_FLAG_BSY_BANK1 : FLASH Bank 1 Busy flag
* @arg FLASH_FLAG_WBNE_BANK1 : Write Buffer Not Empty on Bank 1 flag
* @arg FLASH_FLAG_QW_BANK1 : Wait Queue on Bank 1 flag
* @arg FLASH_FLAG_CRC_BUSY_BANK1 : CRC module is working on Bank 1 flag
* @arg FLASH_FLAG_EOP_BANK1 : End Of Program on Bank 1 flag
* @arg FLASH_FLAG_WRPERR_BANK1 : Write Protection Error on Bank 1 flag
* @arg FLASH_FLAG_PGSERR_BANK1 : Program Sequence Error on Bank 1 flag
* @arg FLASH_FLAG_STRBER_BANK1 : Program Alignment Error on Bank 1 flag
* @arg FLASH_FLAG_INCERR_BANK1 : Inconsistency Error on Bank 1 flag
* @arg FLASH_FLAG_OPERR_BANK1 : Operation Error on Bank 1 flag
* @arg FLASH_FLAG_RDPERR_BANK1 : Read Protection Error on Bank 1 flag
* @arg FLASH_FLAG_RDSERR_BANK1 : Read secure Error on Bank 1 flag
* @arg FLASH_FLAG_SNECCE_BANK1 : Single ECC Error Correction on Bank 1 flag
* @arg FLASH_FLAG_DBECCE_BANK1 : Double Detection ECC Error on Bank 1 flag
* @arg FLASH_FLAG_CRCEND_BANK1 : CRC End on Bank 1 flag
* @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag
*
* In case of Bank 2 This parameter can be one of the following values :
* @arg FLASH_FLAG_BSY_BANK2 : FLASH Bank 2 Busy flag
* @arg FLASH_FLAG_WBNE_BANK2 : Write Buffer Not Empty on Bank 2 flag
* @arg FLASH_FLAG_QW_BANK2 : Wait Queue on Bank 2 flag
* @arg FLASH_FLAG_CRC_BUSY_BANK2 : CRC module is working on Bank 2 flag
* @arg FLASH_FLAG_EOP_BANK2 : End Of Program on Bank 2 flag
* @arg FLASH_FLAG_WRPERR_BANK2 : Write Protection Error on Bank 2 flag
* @arg FLASH_FLAG_PGSERR_BANK2 : Program Sequence Error on Bank 2 flag
* @arg FLASH_FLAG_STRBER_BANK2 : Program Alignment Error on Bank 2 flag
* @arg FLASH_FLAG_INCERR_BANK2 : Inconsistency Error on Bank 2 flag
* @arg FLASH_FLAG_OPERR_BANK2 : Operation Error on Bank 2 flag
* @arg FLASH_FLAG_RDPERR_BANK2 : Read Protection Error on Bank 2 flag
* @arg FLASH_FLAG_RDSERR_BANK2 : Read secure Error on Bank 2 flag
* @arg FLASH_FLAG_SNECCE_BANK2 : Single ECC Error Correction on Bank 2 flag
* @arg FLASH_FLAG_DBECCE_BANK2 : Double Detection ECC Error on Bank 2 flag
* @arg FLASH_FLAG_CRCEND_BANK2 : CRC End on Bank 2 flag
* @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag
* @retval The new state of FLASH_FLAG (SET or RESET).
*/
#define __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) (READ_BIT(FLASH->SR1, (__FLAG__)) == (__FLAG__))
#define __HAL_FLASH_GET_FLAG_BANK2(__FLAG__) (READ_BIT(FLASH->SR2, ((__FLAG__) & 0x7FFFFFFFU)) == (((__FLAG__) & 0x7FFFFFFFU)))
#if defined (DUAL_BANK)
#define __HAL_FLASH_GET_FLAG(__FLAG__) (IS_FLASH_FLAG_BANK1(__FLAG__) ? __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) : \
__HAL_FLASH_GET_FLAG_BANK2(__FLAG__))
#else
#define __HAL_FLASH_GET_FLAG(__FLAG__) __HAL_FLASH_GET_FLAG_BANK1(__FLAG__)
#endif /* DUAL_BANK */
/**
* @brief Clear the specified FLASH flag.
* @param __FLAG__: specifies the FLASH flags to clear.
* In case of Bank 1, this parameter can be any combination of the following values:
* @arg FLASH_FLAG_EOP_BANK1 : End Of Program on Bank 1 flag
* @arg FLASH_FLAG_WRPERR_BANK1 : Write Protection Error on Bank 1 flag
* @arg FLASH_FLAG_PGSERR_BANK1 : Program Sequence Error on Bank 1 flag
* @arg FLASH_FLAG_STRBER_BANK1 : Program Alignment Error on Bank 1 flag
* @arg FLASH_FLAG_INCERR_BANK1 : Inconsistency Error on Bank 1 flag
* @arg FLASH_FLAG_OPERR_BANK1 : Operation Error on Bank 1 flag
* @arg FLASH_FLAG_RDPERR_BANK1 : Read Protection Error on Bank 1 flag
* @arg FLASH_FLAG_RDSERR_BANK1 : Read secure Error on Bank 1 flag
* @arg FLASH_FLAG_SNECCE_BANK1 : Single ECC Error Correction on Bank 1 flag
* @arg FLASH_FLAG_DBECCE_BANK1 : Double Detection ECC Error on Bank 1 flag
* @arg FLASH_FLAG_CRCEND_BANK1 : CRC End on Bank 1 flag
* @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag
* @arg FLASH_FLAG_ALL_ERRORS_BANK1 : All Bank 1 error flags
* @arg FLASH_FLAG_ALL_BANK1 : All Bank 1 flags
*
* In case of Bank 2, this parameter can be any combination of the following values :
* @arg FLASH_FLAG_EOP_BANK2 : End Of Program on Bank 2 flag
* @arg FLASH_FLAG_WRPERR_BANK2 : Write Protection Error on Bank 2 flag
* @arg FLASH_FLAG_PGSERR_BANK2 : Program Sequence Error on Bank 2 flag
* @arg FLASH_FLAG_STRBER_BANK2 : Program Alignment Error on Bank 2 flag
* @arg FLASH_FLAG_INCERR_BANK2 : Inconsistency Error on Bank 2 flag
* @arg FLASH_FLAG_OPERR_BANK2 : Operation Error on Bank 2 flag
* @arg FLASH_FLAG_RDPERR_BANK2 : Read Protection Error on Bank 2 flag
* @arg FLASH_FLAG_RDSERR_BANK2 : Read secure Error on Bank 2 flag
* @arg FLASH_FLAG_SNECCE_BANK2 : Single ECC Error Correction on Bank 2 flag
* @arg FLASH_FLAG_DBECCE_BANK2 : Double Detection ECC Error on Bank 2 flag
* @arg FLASH_FLAG_CRCEND_BANK2 : CRC End on Bank 2 flag
* @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag
* @arg FLASH_FLAG_ALL_ERRORS_BANK2 : All Bank 2 error flags
* @arg FLASH_FLAG_ALL_BANK2 : All Bank 2 flags
* @retval none
*/
#define __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) WRITE_REG(FLASH->CCR1, (__FLAG__))
#define __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__) WRITE_REG(FLASH->CCR2, ((__FLAG__) & 0x7FFFFFFFU))
#if defined (DUAL_BANK)
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (IS_FLASH_FLAG_BANK1(__FLAG__) ? __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) : \
__HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__))
#else
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__)
#endif /* DUAL_BANK */
/**
* @}
*/
/* Include FLASH HAL Extension module */
#include "stm32h7xx_hal_flash_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASH_Exported_Functions
* @{
*/
/** @addtogroup FLASH_Exported_Functions_Group1
* @{
*/
/* Program operation functions ***********************************************/
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress);
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress);
/* FLASH IRQ handler method */
void HAL_FLASH_IRQHandler(void);
/* Callbacks in non blocking modes */
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions **********************************************/
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_Lock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
/* Option bytes control */
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
/**
* @}
*/
/** @addtogroup FLASH_Exported_Functions_Group3
* @{
*/
/* Peripheral State functions ************************************************/
uint32_t HAL_FLASH_GetError(void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Variables FLASH Private Variables
* @{
*/
extern FLASH_ProcessTypeDef pFlash;
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Constants FLASH Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASH_Private_Macros FLASH Private Macros
* @{
*/
#if defined (FLASH_OPTCR_PG_OTP)
#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD) || \
((VALUE) == FLASH_TYPEPROGRAM_OTPWORD))
#else
#define IS_FLASH_TYPEPROGRAM(VALUE) ((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD)
#endif /* FLASH_OPTCR_PG_OTP */
#define IS_FLASH_IT_BANK1(IT) (((IT) & FLASH_IT_ALL_BANK1) == (IT))
#if defined (DUAL_BANK)
#define IS_FLASH_IT_BANK2(IT) (((IT) & FLASH_IT_ALL_BANK2) == (IT))
#endif /* DUAL_BANK */
#define IS_FLASH_FLAG_BANK1(FLAG) (((FLAG) & FLASH_FLAG_ALL_BANK1) == (FLAG))
#if defined (DUAL_BANK)
#define IS_FLASH_FLAG_BANK2(FLAG) (((FLAG) & FLASH_FLAG_ALL_BANK2) == (FLAG))
#endif /* DUAL_BANK */
#if defined (DUAL_BANK)
#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) < FLASH_BANK2_BASE))
#define IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) (((ADDRESS) >= FLASH_BANK2_BASE ) && ((ADDRESS) <= FLASH_END))
#else
#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) <= FLASH_END))
#endif /* DUAL_BANK */
#if defined (DUAL_BANK)
#if defined (FLASH_OPTCR_PG_OTP)
#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS) (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \
IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) || \
IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS))
#else
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \
IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS))
#endif /* FLASH_OPTCR_PG_OTP */
#else
#if defined (FLASH_OPTCR_PG_OTP)
#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS) (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU))
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \
IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS))
#else
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS))
#endif /* FLASH_OPTCR_PG_OTP */
#endif /* DUAL_BANK */
#define IS_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= (0x3FFF0000U))
#if defined (DUAL_BANK)
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
((BANK) == FLASH_BANK_2) || \
((BANK) == FLASH_BANK_BOTH))
#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \
((BANK) == FLASH_BANK_2))
#else
#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1)
#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1)
#endif /* DUAL_BANK */
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Functions FLASH Private functions
* @{
*/
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout, uint32_t Bank);
HAL_StatusTypeDef FLASH_OB_WaitForLastOperation(uint32_t Timeout);
HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout, uint32_t Bank);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_FLASH_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1010
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h Normal file
View File

File diff suppressed because it is too large Load Diff

346
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h Normal file
View File

@@ -0,0 +1,346 @@
/**
******************************************************************************
* @file stm32h7xx_hal_gpio.h
* @author MCD Application Team
* @brief Header file of GPIO HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_GPIO_H
#define STM32H7xx_HAL_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Types GPIO Exported Types
* @{
*/
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIO_mode_define */
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
This parameter can be a value of @ref GPIO_pull_define */
uint32_t Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIO_speed_define */
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
This parameter can be a value of @ref GPIO_Alternate_function_selection */
} GPIO_InitTypeDef;
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
GPIO_PIN_RESET = 0U,
GPIO_PIN_SET
} GPIO_PinState;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_pins_define GPIO pins define
* @{
*/
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
/**
* @}
*/
/** @defgroup GPIO_mode_define GPIO mode define
* @brief GPIO Configuration Mode
* Elements values convention: 0xX0yz00YZ
* - X : GPIO mode or EXTI Mode
* - y : External IT or Event trigger detection
* - z : IO configuration on External IT or Event
* - Y : Output type (Push Pull or Open Drain)
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
* @{
*/
#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
#define GPIO_MODE_IT_RISING (0x11110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
#define GPIO_MODE_IT_FALLING (0x11210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
#define GPIO_MODE_IT_RISING_FALLING (0x11310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING (0x11120000U) /*!< External Event Mode with Rising edge trigger detection */
#define GPIO_MODE_EVT_FALLING (0x11220000U) /*!< External Event Mode with Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING_FALLING (0x11320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup GPIO_speed_define GPIO speed define
* @brief GPIO Output Maximum frequency
* @{
*/
#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Low speed */
#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< Medium speed */
#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< Fast speed */
#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< High speed */
/**
* @}
*/
/** @defgroup GPIO_pull_define GPIO pull define
* @brief GPIO Pull-Up or Pull-Down Activation
* @{
*/
#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
* @{
*/
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __EXTI_LINE__: specifies the EXTI line flag to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending flags.
* @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__))
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending bits.
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__))
#if defined(DUAL_CORE)
/**
* @brief Checks whether the specified EXTI line flag is set or not.
* @param __EXTI_LINE__: specifies the EXTI line flag to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTID2_GET_FLAG(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending flags.
* @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__))
/**
* @brief Checks whether the specified EXTI line is asserted or not.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
*/
#define __HAL_GPIO_EXTID2_GET_IT(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__))
/**
* @brief Clears the EXTI's line pending bits.
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
*/
#define __HAL_GPIO_EXTID2_CLEAR_IT(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__))
#endif
/**
* @brief Generates a Software interrupt on selected EXTI line.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval None
*/
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__))
/**
* @}
*/
/* Include GPIO HAL Extension module */
#include "stm32h7xx_hal_gpio_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIO_Exported_Functions
* @{
*/
/** @addtogroup GPIO_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
/**
* @}
*/
/** @addtogroup GPIO_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup GPIO_Private_Macros GPIO Private Macros
* @{
*/
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
(((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
((MODE) == GPIO_MODE_AF_PP) ||\
((MODE) == GPIO_MODE_AF_OD) ||\
((MODE) == GPIO_MODE_IT_RISING) ||\
((MODE) == GPIO_MODE_IT_FALLING) ||\
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
((MODE) == GPIO_MODE_EVT_RISING) ||\
((MODE) == GPIO_MODE_EVT_FALLING) ||\
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
((MODE) == GPIO_MODE_ANALOG))
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
((PULL) == GPIO_PULLDOWN))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Functions GPIO Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_GPIO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

489
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h Normal file
View File

@@ -0,0 +1,489 @@
/**
******************************************************************************
* @file stm32h7xx_hal_gpio_ex.h
* @author MCD Application Team
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_GPIO_EX_H
#define STM32H7xx_HAL_GPIO_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup GPIOEx GPIOEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
* @{
*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */
#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
#if defined (PWR_CPUCR_PDDS_D2) /* PWR D1 and D2 domains exists */
#define GPIO_AF0_C1DSLEEP ((uint8_t)0x00) /* Cortex-M7 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */
#define GPIO_AF0_C1SLEEP ((uint8_t)0x00) /* Cortex-M7 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */
#define GPIO_AF0_D1PWREN ((uint8_t)0x00) /* Domain 1 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above */
#define GPIO_AF0_D2PWREN ((uint8_t)0x00) /* Domain 2 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above */
#if defined(DUAL_CORE)
#define GPIO_AF0_C2DSLEEP ((uint8_t)0x00) /* Cortex-M4 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */
#define GPIO_AF0_C2SLEEP ((uint8_t)0x00) /* Cortex-M4 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */
#endif /* DUAL_CORE */
#endif /* PWR_CPUCR_PDDS_D2 */
/**
* @brief AF 1 selection
*/
#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */
#if defined(HRTIM1)
#define GPIO_AF1_HRTIM1 ((uint8_t)0x01) /* HRTIM1 Alternate Function mapping */
#endif /* HRTIM1 */
#if defined(SAI4)
#define GPIO_AF1_SAI4 ((uint8_t)0x01) /* SAI4 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
#endif /* SAI4 */
#define GPIO_AF1_FMC ((uint8_t)0x01) /* FMC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
/**
* @brief AF 2 selection
*/
#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
#define GPIO_AF2_TIM12 ((uint8_t)0x02) /* TIM12 Alternate Function mapping */
#define GPIO_AF2_SAI1 ((uint8_t)0x02) /* SAI1 Alternate Function mapping */
#if defined(HRTIM1)
#define GPIO_AF2_HRTIM1 ((uint8_t)0x02) /* HRTIM1 Alternate Function mapping */
#endif /* HRTIM1 */
#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
#if defined(FDCAN3)
#define GPIO_AF2_FDCAN3 ((uint8_t)0x02) /* FDCAN3 Alternate Function mapping */
#endif /*FDCAN3*/
/**
* @brief AF 3 selection
*/
#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF3_LPTIM2 ((uint8_t)0x03) /* LPTIM2 Alternate Function mapping */
#define GPIO_AF3_DFSDM1 ((uint8_t)0x03) /* DFSDM Alternate Function mapping */
#define GPIO_AF3_LPTIM3 ((uint8_t)0x03) /* LPTIM3 Alternate Function mapping */
#define GPIO_AF3_LPTIM4 ((uint8_t)0x03) /* LPTIM4 Alternate Function mapping */
#define GPIO_AF3_LPTIM5 ((uint8_t)0x03) /* LPTIM5 Alternate Function mapping */
#define GPIO_AF3_LPUART ((uint8_t)0x03) /* LPUART Alternate Function mapping */
#if defined(OCTOSPIM)
#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OCTOSPI Manager Port 1 Alternate Function mapping */
#define GPIO_AF3_OCTOSPIM_P2 ((uint8_t)0x03) /* OCTOSPI Manager Port 2 Alternate Function mapping */
#endif /* OCTOSPIM */
#if defined(HRTIM1)
#define GPIO_AF3_HRTIM1 ((uint8_t)0x03) /* HRTIM1 Alternate Function mapping */
#endif /* HRTIM1 */
#define GPIO_AF3_LTDC ((uint8_t)0x03) /* LTDC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
/**
* @brief AF 4 selection
*/
#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */
#if defined(I2C5)
#define GPIO_AF4_I2C5 ((uint8_t)0x04) /* I2C5 Alternate Function mapping */
#endif /* I2C5*/
#define GPIO_AF4_TIM15 ((uint8_t)0x04) /* TIM15 Alternate Function mapping */
#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */
#define GPIO_AF4_LPTIM2 ((uint8_t)0x04) /* LPTIM2 Alternate Function mapping */
#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */
#if defined(USART10)
#define GPIO_AF4_USART10 ((uint8_t)0x04) /* USART10 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
#endif /*USART10*/
#define GPIO_AF4_DFSDM1 ((uint8_t)0x04) /* DFSDM Alternate Function mapping */
#if defined(DFSDM2_BASE)
#define GPIO_AF4_DFSDM2 ((uint8_t)0x04) /* DFSDM2 Alternate Function mapping */
#endif /* DFSDM2_BASE */
#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
#if defined(PSSI)
#define GPIO_AF4_PSSI ((uint8_t)0x04) /* PSSI Alternate Function mapping */
#endif /* PSSI */
#if defined(OCTOSPIM)
#define GPIO_AF4_OCTOSPIM_P1 ((uint8_t)0x04) /* OCTOSPI Manager Port 1 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
#endif /* OCTOSPIM */
/**
* @brief AF 5 selection
*/
#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */
#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
#define GPIO_AF5_CEC ((uint8_t)0x05) /* CEC Alternate Function mapping */
#if defined(FDCAN3)
#define GPIO_AF5_FDCAN3 ((uint8_t)0x05) /* FDCAN3 Alternate Function mapping */
#endif /*FDCAN3*/
/**
* @brief AF 6 selection
*/
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2 Alternate Function mapping */
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */
#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
#define GPIO_AF6_I2C4 ((uint8_t)0x06) /* I2C4 Alternate Function mapping */
#if defined(I2C5)
#define GPIO_AF6_I2C5 ((uint8_t)0x06) /* I2C5 Alternate Function mapping */
#endif /* I2C5*/
#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM Alternate Function mapping */
#define GPIO_AF6_UART4 ((uint8_t)0x06) /* UART4 Alternate Function mapping */
#if defined(DFSDM2_BASE)
#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */
#endif /* DFSDM2_BASE */
#if defined(SAI3)
#define GPIO_AF6_SAI3 ((uint8_t)0x06) /* SAI3 Alternate Function mapping */
#endif /* SAI3 */
#if defined(OCTOSPIM)
#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OCTOSPI Manager Port 1 Alternate Function mapping */
#endif /* OCTOSPIM */
/**
* @brief AF 7 selection
*/
#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2 Alternate Function mapping */
#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3 Alternate Function mapping */
#define GPIO_AF7_SPI6 ((uint8_t)0x07) /* SPI6 Alternate Function mapping */
#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_USART6 ((uint8_t)0x07) /* USART6 Alternate Function mapping */
#define GPIO_AF7_UART7 ((uint8_t)0x07) /* UART7 Alternate Function mapping */
#define GPIO_AF7_SDMMC1 ((uint8_t)0x07) /* SDMMC1 Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF8_SPI6 ((uint8_t)0x08) /* SPI6 Alternate Function mapping */
#if defined(SAI2)
#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */
#endif /*SAI2*/
#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
#define GPIO_AF8_SPDIF ((uint8_t)0x08) /* SPDIF Alternate Function mapping */
#define GPIO_AF8_LPUART ((uint8_t)0x08) /* LPUART Alternate Function mapping */
#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */
#if defined(SAI4)
#define GPIO_AF8_SAI4 ((uint8_t)0x08) /* SAI4 Alternate Function mapping */
#endif /* SAI4 */
/**
* @brief AF 9 selection
*/
#define GPIO_AF9_FDCAN1 ((uint8_t)0x09) /* FDCAN1 Alternate Function mapping */
#define GPIO_AF9_FDCAN2 ((uint8_t)0x09) /* FDCAN2 Alternate Function mapping */
#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_SDMMC2 ((uint8_t)0x09) /* SDMMC2 Alternate Function mapping */
#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */
#define GPIO_AF9_SPDIF ((uint8_t)0x09) /* SPDIF Alternate Function mapping */
#define GPIO_AF9_FMC ((uint8_t)0x09) /* FMC Alternate Function mapping */
#if defined(QUADSPI)
#define GPIO_AF9_QUADSPI ((uint8_t)0x09) /* QUADSPI Alternate Function mapping */
#endif /* QUADSPI */
#if defined(SAI4)
#define GPIO_AF9_SAI4 ((uint8_t)0x09) /* SAI4 Alternate Function mapping */
#endif /* SAI4 */
#if defined(OCTOSPIM)
#define GPIO_AF9_OCTOSPIM_P1 ((uint8_t)0x09) /* OCTOSPI Manager Port 1 Alternate Function mapping */
#define GPIO_AF9_OCTOSPIM_P2 ((uint8_t)0x09) /* OCTOSPI Manager Port 2 Alternate Function mapping */
#endif /* OCTOSPIM */
/**
* @brief AF 10 selection
*/
#if defined(SAI2)
#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */
#endif /*SAI2*/
#define GPIO_AF10_SDMMC2 ((uint8_t)0x0A) /* SDMMC2 Alternate Function mapping */
#if defined(USB2_OTG_FS)
#define GPIO_AF10_OTG2_FS ((uint8_t)0x0A) /* OTG2_FS Alternate Function mapping */
#endif /*USB2_OTG_FS*/
#define GPIO_AF10_COMP1 ((uint8_t)0x0A) /* COMP1 Alternate Function mapping */
#define GPIO_AF10_COMP2 ((uint8_t)0x0A) /* COMP2 Alternate Function mapping */
#if defined(LTDC)
#define GPIO_AF10_LTDC ((uint8_t)0x0A) /* LTDC Alternate Function mapping */
#endif /*LTDC*/
#define GPIO_AF10_CRS_SYNC ((uint8_t)0x0A) /* CRS Sync Alternate Function mapping : available on STM32H7 Rev.B and above */
#if defined(QUADSPI)
#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */
#endif /* QUADSPI */
#if defined(SAI4)
#define GPIO_AF10_SAI4 ((uint8_t)0x0A) /* SAI4 Alternate Function mapping */
#endif /* SAI4 */
#if !defined(USB2_OTG_FS)
#define GPIO_AF10_OTG1_FS ((uint8_t)0x0A) /* OTG1_FS Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
#endif /* !USB2_OTG_FS */
#define GPIO_AF10_OTG1_HS ((uint8_t)0x0A) /* OTG1_HS Alternate Function mapping */
#if defined(OCTOSPIM)
#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OCTOSPI Manager Port 1 Alternate Function mapping */
#endif /* OCTOSPIM */
#define GPIO_AF10_TIM8 ((uint8_t)0x0A) /* TIM8 Alternate Function mapping */
#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
/**
* @brief AF 11 selection
*/
#define GPIO_AF11_SWP ((uint8_t)0x0B) /* SWP Alternate Function mapping */
#define GPIO_AF11_MDIOS ((uint8_t)0x0B) /* MDIOS Alternate Function mapping */
#define GPIO_AF11_UART7 ((uint8_t)0x0B) /* UART7 Alternate Function mapping */
#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /* SDMMC2 Alternate Function mapping */
#define GPIO_AF11_DFSDM1 ((uint8_t)0x0B) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF11_COMP1 ((uint8_t)0x0B) /* COMP1 Alternate Function mapping */
#define GPIO_AF11_COMP2 ((uint8_t)0x0B) /* COMP2 Alternate Function mapping */
#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
#define GPIO_AF11_I2C4 ((uint8_t)0x0B) /* I2C4 Alternate Function mapping */
#if defined(DFSDM2_BASE)
#define GPIO_AF11_DFSDM2 ((uint8_t)0x0B) /* DFSDM2 Alternate Function mapping */
#endif /* DFSDM2_BASE */
#if defined(USART10)
#define GPIO_AF11_USART10 ((uint8_t)0x0B) /* USART10 Alternate Function mapping */
#endif /* USART10 */
#if defined(UART9)
#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */
#endif /* UART9 */
#if defined(ETH)
#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETH Alternate Function mapping */
#endif /* ETH */
#if defined(LTDC)
#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
#endif /*LTDC*/
#if defined(OCTOSPIM)
#define GPIO_AF11_OCTOSPIM_P1 ((uint8_t)0x0B) /* OCTOSPI Manager Port 1 Alternate Function mapping */
#endif /* OCTOSPIM */
/**
* @brief AF 12 selection
*/
#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */
#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */
#define GPIO_AF12_MDIOS ((uint8_t)0x0C) /* MDIOS Alternate Function mapping */
#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */
#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */
#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
#define GPIO_AF12_TIM8 ((uint8_t)0x0C) /* TIM8 Alternate Function mapping */
#if defined(LTDC)
#define GPIO_AF12_LTDC ((uint8_t)0x0C) /* LTDC Alternate Function mapping */
#endif /*LTDC*/
#if defined(USB2_OTG_FS)
#define GPIO_AF12_OTG1_FS ((uint8_t)0x0C) /* OTG1_FS Alternate Function mapping */
#endif /* USB2_OTG_FS */
#if defined(OCTOSPIM)
#define GPIO_AF12_OCTOSPIM_P1 ((uint8_t)0x0C) /* OCTOSPI Manager Port 1 Alternate Function mapping */
#endif /* OCTOSPIM */
/**
* @brief AF 13 selection
*/
#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
#define GPIO_AF13_COMP1 ((uint8_t)0x0D) /* COMP1 Alternate Function mapping */
#define GPIO_AF13_COMP2 ((uint8_t)0x0D) /* COMP2 Alternate Function mapping */
#if defined(LTDC)
#define GPIO_AF13_LTDC ((uint8_t)0x0D) /* LTDC Alternate Function mapping */
#endif /*LTDC*/
#if defined(DSI)
#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */
#endif /* DSI */
#if defined(PSSI)
#define GPIO_AF13_PSSI ((uint8_t)0x0D) /* PSSI Alternate Function mapping */
#endif /* PSSI */
#define GPIO_AF13_TIM1 ((uint8_t)0x0D) /* TIM1 Alternate Function mapping */
#if defined(TIM23)
#define GPIO_AF13_TIM23 ((uint8_t)0x0D) /* TIM23 Alternate Function mapping */
#endif /*TIM23*/
/**
* @brief AF 14 selection
*/
#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LTDC Alternate Function mapping */
#define GPIO_AF14_UART5 ((uint8_t)0x0E) /* UART5 Alternate Function mapping */
#if defined(TIM24)
#define GPIO_AF14_TIM24 ((uint8_t)0x0E) /* TIM24 Alternate Function mapping */
#endif /*TIM24*/
/**
* @brief AF 15 selection
*/
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
* @{
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
* @{
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
* @{
*/
/**
* @brief GPIO pin available on the platform
*/
/* Defines the available pins per GPIOs */
#define GPIOA_PIN_AVAILABLE GPIO_PIN_All
#define GPIOB_PIN_AVAILABLE GPIO_PIN_All
#define GPIOC_PIN_AVAILABLE GPIO_PIN_All
#define GPIOD_PIN_AVAILABLE GPIO_PIN_All
#define GPIOE_PIN_AVAILABLE GPIO_PIN_All
#define GPIOF_PIN_AVAILABLE GPIO_PIN_All
#define GPIOG_PIN_AVAILABLE GPIO_PIN_All
#if defined(GPIOI)
#define GPIOI_PIN_AVAILABLE GPIO_PIN_All
#endif /*GPIOI*/
#if defined(GPIOI)
#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All
#else
#define GPIOJ_PIN_AVAILABLE (GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 )
#endif /* GPIOI */
#define GPIOH_PIN_AVAILABLE GPIO_PIN_All
#if defined(GPIOI)
#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \
GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
#else
#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 )
#endif /* GPIOI */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
* @{
*/
/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
* @{
*/
#if defined(GPIOI)
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0UL :\
((__GPIOx__) == (GPIOB))? 1UL :\
((__GPIOx__) == (GPIOC))? 2UL :\
((__GPIOx__) == (GPIOD))? 3UL :\
((__GPIOx__) == (GPIOE))? 4UL :\
((__GPIOx__) == (GPIOF))? 5UL :\
((__GPIOx__) == (GPIOG))? 6UL :\
((__GPIOx__) == (GPIOH))? 7UL :\
((__GPIOx__) == (GPIOI))? 8UL :\
((__GPIOx__) == (GPIOJ))? 9UL : 10UL)
#else
#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0UL :\
((__GPIOx__) == (GPIOB))? 1UL :\
((__GPIOx__) == (GPIOC))? 2UL :\
((__GPIOx__) == (GPIOD))? 3UL :\
((__GPIOx__) == (GPIOE))? 4UL :\
((__GPIOx__) == (GPIOF))? 5UL :\
((__GPIOx__) == (GPIOG))? 6UL :\
((__GPIOx__) == (GPIOH))? 7UL :\
((__GPIOx__) == (GPIOJ))? 9UL : 10UL)
#endif /* GPIOI */
/**
* @}
*/
/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
* @{
*/
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_GPIO_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

214
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h Normal file
View File

@@ -0,0 +1,214 @@
/**
******************************************************************************
* @file stm32h7xx_hal_hsem.h
* @author MCD Application Team
* @brief Header file of HSEM HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_HSEM_H
#define STM32H7xx_HAL_HSEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup HSEM
* @{
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HSEM_Exported_Macros HSEM Exported Macros
* @{
*/
/**
* @brief SemID to mask helper Macro.
* @param __SEMID__: semaphore ID from 0 to 31
* @retval Semaphore Mask.
*/
#define __HAL_HSEM_SEMID_TO_MASK(__SEMID__) (1 << (__SEMID__))
/**
* @brief Enables the specified HSEM interrupts.
* @param __SEM_MASK__: semaphores Mask
* @retval None.
*/
#if defined(DUAL_CORE)
#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
(HSEM->C1IER |= (__SEM_MASK__)) : \
(HSEM->C2IER |= (__SEM_MASK__)))
#else
#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) (HSEM->IER |= (__SEM_MASK__))
#endif /* DUAL_CORE */
/**
* @brief Disables the specified HSEM interrupts.
* @param __SEM_MASK__: semaphores Mask
* @retval None.
*/
#if defined(DUAL_CORE)
#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
(HSEM->C1IER &= ~(__SEM_MASK__)) : \
(HSEM->C2IER &= ~(__SEM_MASK__)))
#else
#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) (HSEM->IER &= ~(__SEM_MASK__))
#endif /* DUAL_CORE */
/**
* @brief Checks whether interrupt has occurred or not for semaphores specified by a mask.
* @param __SEM_MASK__: semaphores Mask
* @retval semaphores Mask : Semaphores where an interrupt occurred.
*/
#if defined(DUAL_CORE)
#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
((__SEM_MASK__) & HSEM->C1MISR) : \
((__SEM_MASK__) & HSEM->C2MISR1))
#else
#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((__SEM_MASK__) & HSEM->MISR)
#endif /* DUAL_CORE */
/**
* @brief Get the semaphores release status flags.
* @param __SEM_MASK__: semaphores Mask
* @retval semaphores Mask : Semaphores where Release flags rise.
*/
#if defined(DUAL_CORE)
#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
(__SEM_MASK__) & HSEM->C1ISR : \
(__SEM_MASK__) & HSEM->C2ISR)
#else
#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((__SEM_MASK__) & HSEM->ISR)
#endif /* DUAL_CORE */
/**
* @brief Clears the HSEM Interrupt flags.
* @param __SEM_MASK__: semaphores Mask
* @retval None.
*/
#if defined(DUAL_CORE)
#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
(HSEM->C1ICR |= (__SEM_MASK__)) : \
(HSEM->C2ICR |= (__SEM_MASK__)))
#else
#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) (HSEM->ICR |= (__SEM_MASK__))
#endif /* DUAL_CORE */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup HSEM_Exported_Functions HSEM Exported Functions
* @{
*/
/** @addtogroup HSEM_Exported_Functions_Group1 Take and Release functions
* @brief HSEM Take and Release functions
* @{
*/
/* HSEM semaphore take (lock) using 2-Step method ****************************/
HAL_StatusTypeDef HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID);
/* HSEM semaphore fast take (lock) using 1-Step method ***********************/
HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID);
/* HSEM Check semaphore state Taken or not **********************************/
uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID);
/* HSEM Release **************************************************************/
void HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID);
/* HSEM Release All************************************************************/
void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID);
/**
* @}
*/
/** @addtogroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions
* @brief HSEM Set and Get Key functions.
* @{
*/
/* HSEM Set Clear Key *********************************************************/
void HAL_HSEM_SetClearKey(uint32_t Key);
/* HSEM Get Clear Key *********************************************************/
uint32_t HAL_HSEM_GetClearKey(void);
/**
* @}
*/
/** @addtogroup HSEM_Exported_Functions_Group3
* @brief HSEM Notification functions
* @{
*/
/* HSEM Activate HSEM Notification (When a semaphore is released) ) *****************/
void HAL_HSEM_ActivateNotification(uint32_t SemMask);
/* HSEM Deactivate HSEM Notification (When a semaphore is released) ****************/
void HAL_HSEM_DeactivateNotification(uint32_t SemMask);
/* HSEM Free Callback (When a semaphore is released) *******************************/
void HAL_HSEM_FreeCallback(uint32_t SemMask);
/* HSEM IRQ Handler **********************************************************/
void HAL_HSEM_IRQHandler(void);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup HSEM_Private_Macros HSEM Private Macros
* @{
*/
#define IS_HSEM_SEMID(__SEMID__) ((__SEMID__) <= HSEM_SEMID_MAX )
#define IS_HSEM_PROCESSID(__PROCESSID__) ((__PROCESSID__) <= HSEM_PROCESSID_MAX )
#define IS_HSEM_KEY(__KEY__) ((__KEY__) <= HSEM_CLEAR_KEY_MAX )
#if defined(DUAL_CORE)
#define IS_HSEM_COREID(__COREID__) (((__COREID__) == HSEM_CPU1_COREID) || \
((__COREID__) == HSEM_CPU2_COREID))
#else
#define IS_HSEM_COREID(__COREID__) ((__COREID__) == HSEM_CPU1_COREID)
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_HSEM_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

782
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h Normal file
View File

@@ -0,0 +1,782 @@
/**
******************************************************************************
* @file stm32h7xx_hal_i2c.h
* @author MCD Application Team
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_I2C_H
#define STM32H7xx_HAL_I2C_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup I2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup I2C_Exported_Types I2C Exported Types
* @{
*/
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
* @brief I2C Configuration Structure definition
* @{
*/
typedef struct
{
uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
This parameter calculated by referring to I2C initialization
section in Reference manual */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
This parameter can be a value of @ref I2C_ADDRESSING_MODE */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
This parameter can be a 7-bit address. */
uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
} I2C_InitTypeDef;
/**
* @}
*/
/** @defgroup HAL_state_structure_definition HAL state structure definition
* @brief HAL State structure definition
* @note HAL I2C State value coding follow below described bitmap :\n
* b7-b6 Error information\n
* 00 : No Error\n
* 01 : Abort (Abort user request on going)\n
* 10 : Timeout\n
* 11 : Error\n
* b5 Peripheral initialization status\n
* 0 : Reset (peripheral not initialized)\n
* 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
* b4 (not used)\n
* x : Should be set to 0\n
* b3\n
* 0 : Ready or Busy (No Listen mode ongoing)\n
* 1 : Listen (peripheral in Address Listen Mode)\n
* b2 Intrinsic process state\n
* 0 : Ready\n
* 1 : Busy (peripheral busy with some configuration or internal operations)\n
* b1 Rx state\n
* 0 : Ready (no Rx operation ongoing)\n
* 1 : Busy (Rx operation ongoing)\n
* b0 Tx state\n
* 0 : Ready (no Tx operation ongoing)\n
* 1 : Busy (Tx operation ongoing)
* @{
*/
typedef enum
{
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
process is ongoing */
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
process is ongoing */
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
} HAL_I2C_StateTypeDef;
/**
* @}
*/
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
* @brief HAL Mode structure definition
* @note HAL I2C Mode value coding follow below described bitmap :\n
* b7 (not used)\n
* x : Should be set to 0\n
* b6\n
* 0 : None\n
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
* b5\n
* 0 : None\n
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
* b4\n
* 0 : None\n
* 1 : Master (HAL I2C communication is in Master Mode)\n
* b3-b2-b1-b0 (not used)\n
* xxxx : Should be set to 0000
* @{
*/
typedef enum
{
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
} HAL_I2C_ModeTypeDef;
/**
* @}
*/
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
* @brief I2C Error Code definition
* @{
*/
#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
/**
* @}
*/
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
* @brief I2C handle Structure definition
* @{
*/
typedef struct __I2C_HandleTypeDef
{
I2C_TypeDef *Instance; /*!< I2C registers base address */
I2C_InitTypeDef Init; /*!< I2C communication parameters */
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
uint16_t XferSize; /*!< I2C transfer size */
__IO uint16_t XferCount; /*!< I2C transfer counter */
__IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
be a value of @ref I2C_XFEROPTIONS */
__IO uint32_t PreviousState; /*!< I2C communication Previous state */
HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
HAL_LockTypeDef Lock; /*!< I2C locking object */
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
__IO uint32_t ErrorCode; /*!< I2C Error code */
__IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
} I2C_HandleTypeDef;
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
/**
* @brief HAL I2C Callback ID enumeration definition
*/
typedef enum
{
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
} HAL_I2C_CallbackIDTypeDef;
/**
* @brief HAL I2C Callback pointer definition
*/
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/**
* @}
*/
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2C_Exported_Constants I2C Exported Constants
* @{
*/
/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
* @{
*/
#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
/* List of XferOptions in usage of :
* 1- Restart condition in all use cases (direction change or not)
*/
#define I2C_OTHER_FRAME (0x000000AAU)
#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U)
/**
* @}
*/
/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
* @{
*/
#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
/**
* @}
*/
/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
* @{
*/
#define I2C_DUALADDRESS_DISABLE (0x00000000U)
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
/**
* @}
*/
/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
* @{
*/
#define I2C_OA2_NOMASK ((uint8_t)0x00U)
#define I2C_OA2_MASK01 ((uint8_t)0x01U)
#define I2C_OA2_MASK02 ((uint8_t)0x02U)
#define I2C_OA2_MASK03 ((uint8_t)0x03U)
#define I2C_OA2_MASK04 ((uint8_t)0x04U)
#define I2C_OA2_MASK05 ((uint8_t)0x05U)
#define I2C_OA2_MASK06 ((uint8_t)0x06U)
#define I2C_OA2_MASK07 ((uint8_t)0x07U)
/**
* @}
*/
/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
* @{
*/
#define I2C_GENERALCALL_DISABLE (0x00000000U)
#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
/**
* @}
*/
/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
* @{
*/
#define I2C_NOSTRETCH_DISABLE (0x00000000U)
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
/**
* @}
*/
/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
* @{
*/
#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
/**
* @}
*/
/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
* @{
*/
#define I2C_DIRECTION_TRANSMIT (0x00000000U)
#define I2C_DIRECTION_RECEIVE (0x00000001U)
/**
* @}
*/
/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
* @{
*/
#define I2C_RELOAD_MODE I2C_CR2_RELOAD
#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
#define I2C_SOFTEND_MODE (0x00000000U)
/**
* @}
*/
/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
* @{
*/
#define I2C_NO_STARTSTOP (0x00000000U)
#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
/**
* @}
*/
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
* @brief I2C Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
* @{
*/
#define I2C_IT_ERRI I2C_CR1_ERRIE
#define I2C_IT_TCI I2C_CR1_TCIE
#define I2C_IT_STOPI I2C_CR1_STOPIE
#define I2C_IT_NACKI I2C_CR1_NACKIE
#define I2C_IT_ADDRI I2C_CR1_ADDRIE
#define I2C_IT_RXI I2C_CR1_RXIE
#define I2C_IT_TXI I2C_CR1_TXIE
/**
* @}
*/
/** @defgroup I2C_Flag_definition I2C Flag definition
* @{
*/
#define I2C_FLAG_TXE I2C_ISR_TXE
#define I2C_FLAG_TXIS I2C_ISR_TXIS
#define I2C_FLAG_RXNE I2C_ISR_RXNE
#define I2C_FLAG_ADDR I2C_ISR_ADDR
#define I2C_FLAG_AF I2C_ISR_NACKF
#define I2C_FLAG_STOPF I2C_ISR_STOPF
#define I2C_FLAG_TC I2C_ISR_TC
#define I2C_FLAG_TCR I2C_ISR_TCR
#define I2C_FLAG_BERR I2C_ISR_BERR
#define I2C_FLAG_ARLO I2C_ISR_ARLO
#define I2C_FLAG_OVR I2C_ISR_OVR
#define I2C_FLAG_PECERR I2C_ISR_PECERR
#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
#define I2C_FLAG_ALERT I2C_ISR_ALERT
#define I2C_FLAG_BUSY I2C_ISR_BUSY
#define I2C_FLAG_DIR I2C_ISR_DIR
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup I2C_Exported_Macros I2C Exported Macros
* @{
*/
/** @brief Reset I2C handle state.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
#endif
/** @brief Enable the specified I2C interrupt.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to enable.
* This parameter can be one of the following values:
* @arg @ref I2C_IT_ERRI Errors interrupt enable
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
* @arg @ref I2C_IT_RXI RX interrupt enable
* @arg @ref I2C_IT_TXI TX interrupt enable
*
* @retval None
*/
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
/** @brief Disable the specified I2C interrupt.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to disable.
* This parameter can be one of the following values:
* @arg @ref I2C_IT_ERRI Errors interrupt enable
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
* @arg @ref I2C_IT_RXI RX interrupt enable
* @arg @ref I2C_IT_TXI TX interrupt enable
*
* @retval None
*/
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
/** @brief Check whether the specified I2C interrupt source is enabled or not.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
* This parameter can be one of the following values:
* @arg @ref I2C_IT_ERRI Errors interrupt enable
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
* @arg @ref I2C_IT_RXI RX interrupt enable
* @arg @ref I2C_IT_TXI TX interrupt enable
*
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified I2C flag is set or not.
* @param __HANDLE__ specifies the I2C Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg @ref I2C_FLAG_TXE Transmit data register empty
* @arg @ref I2C_FLAG_TXIS Transmit interrupt status
* @arg @ref I2C_FLAG_RXNE Receive data register not empty
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
* @arg @ref I2C_FLAG_STOPF STOP detection flag
* @arg @ref I2C_FLAG_TC Transfer complete (master mode)
* @arg @ref I2C_FLAG_TCR Transfer complete reload
* @arg @ref I2C_FLAG_BERR Bus error
* @arg @ref I2C_FLAG_ARLO Arbitration lost
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
* @arg @ref I2C_FLAG_PECERR PEC error in reception
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
* @arg @ref I2C_FLAG_ALERT SMBus alert
* @arg @ref I2C_FLAG_BUSY Bus busy
* @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
*
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define I2C_FLAG_MASK (0x0001FFFFU)
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
* @param __HANDLE__ specifies the I2C Handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg @ref I2C_FLAG_TXE Transmit data register empty
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
* @arg @ref I2C_FLAG_STOPF STOP detection flag
* @arg @ref I2C_FLAG_BERR Bus error
* @arg @ref I2C_FLAG_ARLO Arbitration lost
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
* @arg @ref I2C_FLAG_PECERR PEC error in reception
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
* @arg @ref I2C_FLAG_ALERT SMBus alert
*
* @retval None
*/
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
: ((__HANDLE__)->Instance->ICR = (__FLAG__)))
/** @brief Enable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
/** @brief Disable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
/**
* @}
*/
/* Include I2C HAL Extended module */
#include "stm32h7xx_hal_i2c_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2C_Exported_Functions
* @{
*/
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions******************************/
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
* @{
*/
/* IO operation functions ****************************************************/
/******* Blocking mode: Polling */
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
/******* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
/******* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
/**
* @}
*/
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
* @{
*/
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
* @{
*/
/* Peripheral State, Mode and Error functions *********************************/
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2C_Private_Constants I2C Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup I2C_Private_Macro I2C Private Macros
* @{
*/
#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
((MODE) == I2C_ADDRESSINGMODE_10BIT))
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
((MASK) == I2C_OA2_MASK01) || \
((MASK) == I2C_OA2_MASK02) || \
((MASK) == I2C_OA2_MASK03) || \
((MASK) == I2C_OA2_MASK04) || \
((MASK) == I2C_OA2_MASK05) || \
((MASK) == I2C_OA2_MASK06) || \
((MASK) == I2C_OA2_MASK07))
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
((CALL) == I2C_GENERALCALL_ENABLE))
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
((STRETCH) == I2C_NOSTRETCH_ENABLE))
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
((SIZE) == I2C_MEMADD_SIZE_16BIT))
#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
((MODE) == I2C_AUTOEND_MODE) || \
((MODE) == I2C_SOFTEND_MODE))
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
((REQUEST) == I2C_GENERATE_START_READ) || \
((REQUEST) == I2C_GENERATE_START_WRITE) || \
((REQUEST) == I2C_NO_STARTSTOP))
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
((REQUEST) == I2C_NEXT_FRAME) || \
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
((REQUEST) == I2C_LAST_FRAME) || \
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
/**
* @}
*/
/* Private Functions ---------------------------------------------------------*/
/** @defgroup I2C_Private_Functions I2C Private Functions
* @{
*/
/* Private functions are defined in stm32h7xx_hal_i2c.c file */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_I2C_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

187
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h Normal file
View File

@@ -0,0 +1,187 @@
/**
******************************************************************************
* @file stm32h7xx_hal_i2c_ex.h
* @author MCD Application Team
* @brief Header file of I2C HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_I2C_EX_H
#define STM32H7xx_HAL_I2C_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup I2CEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
* @{
*/
/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
* @{
*/
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
/**
* @}
*/
/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
* @{
*/
#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMCR_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMCR_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMCR_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMCR_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
#if defined(SYSCFG_PMCR_I2C5_FMP)
#define I2C_FASTMODEPLUS_I2C5 SYSCFG_PMCR_I2C5_FMP /*!< Enable Fast Mode Plus on I2C5 pins */
#else
#define I2C_FASTMODEPLUS_I2C5 (uint32_t)(0x00001000U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C5 not supported */
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
* @{
*/
/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
* @{
*/
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
((FILTER) == I2C_ANALOGFILTER_DISABLE))
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
#if (defined(SYSCFG_PMCR_I2C1_FMP) && defined(SYSCFG_PMCR_I2C2_FMP) && defined(SYSCFG_PMCR_I2C3_FMP) && defined(SYSCFG_PMCR_I2C4_FMP))
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4))
#elif defined(SYSCFG_PMCR_I2C1_FMP) && defined(SYSCFG_PMCR_I2C2_FMP) && defined(SYSCFG_PMCR_I2C3_FMP)
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3))
#elif defined(SYSCFG_PMCR_I2C1_FMP) && defined(SYSCFG_PMCR_I2C2_FMP)
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2))
#elif defined(SYSCFG_PMCR_I2C1_FMP)
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
#endif /* SYSCFG_PMCR_I2C1_FMP && SYSCFG_PMCR_I2C2_FMP && SYSCFG_PMCR_I2C3_FMP && SYSCFG_PMCR_I2C4_FMP */
/**
* @}
*/
/* Private Functions ---------------------------------------------------------*/
/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
* @{
*/
/* Private functions are defined in stm32h7xx_hal_i2c_ex.c file */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_I2C_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

870
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h Normal file
View File

@@ -0,0 +1,870 @@
/**
******************************************************************************
* @file stm32h7xx_hal_mdma.h
* @author MCD Application Team
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_MDMA_H
#define STM32H7xx_HAL_MDMA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup MDMA
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup MDMA_Exported_Types MDMA Exported Types
* @brief MDMA Exported Types
* @{
*/
/**
* @brief MDMA Configuration Structure definition
*/
typedef struct
{
uint32_t Request; /*!< Specifies the MDMA request.
This parameter can be a value of @ref MDMA_Request_selection*/
uint32_t TransferTriggerMode; /*!< Specifies the Trigger Transfer mode : each request triggers a :
a buffer transfer, a block transfer, a repeated block transfer or a linked list transfer
This parameter can be a value of @ref MDMA_Transfer_TriggerMode */
uint32_t Priority; /*!< Specifies the software priority for the MDMAy channelx.
This parameter can be a value of @ref MDMA_Priority_level */
uint32_t Endianness; /*!< Specifies if the MDMA transactions preserve the Little endianness.
This parameter can be a value of @ref MDMA_Endianness */
uint32_t SourceInc; /*!< Specifies if the Source increment mode .
This parameter can be a value of @ref MDMA_Source_increment_mode */
uint32_t DestinationInc; /*!< Specifies if the Destination increment mode .
This parameter can be a value of @ref MDMA_Destination_increment_mode */
uint32_t SourceDataSize; /*!< Specifies the source data size.
This parameter can be a value of @ref MDMA_Source_data_size */
uint32_t DestDataSize; /*!< Specifies the destination data size.
This parameter can be a value of @ref MDMA_Destination_data_size */
uint32_t DataAlignment; /*!< Specifies the source to destination Memory data packing/padding mode.
This parameter can be a value of @ref MDMA_data_Alignment */
uint32_t BufferTransferLength; /*!< Specifies the buffer Transfer Length (number of bytes),
this is the number of bytes to be transferred in a single transfer (1 byte to 128 bytes)*/
uint32_t SourceBurst; /*!< Specifies the Burst transfer configuration for the source memory transfers.
It specifies the amount of data to be transferred in a single non interruptable
transaction.
This parameter can be a value of @ref MDMA_Source_burst
@note : the burst may be FIXED/INCR based on SourceInc value ,
the BURST must be programmed as to ensure that the burst size will be lower than than
BufferTransferLength */
uint32_t DestBurst; /*!< Specifies the Burst transfer configuration for the destination memory transfers.
It specifies the amount of data to be transferred in a single non interruptable
transaction.
This parameter can be a value of @ref MDMA_Destination_burst
@note : the burst may be FIXED/INCR based on DestinationInc value ,
the BURST must be programmed as to ensure that the burst size will be lower than than
BufferTransferLength */
int32_t SourceBlockAddressOffset; /*!< this field specifies the Next block source address offset
signed value : if > 0 then increment the next block source Address by offset from where the last block ends
if < 0 then decrement the next block source Address by offset from where the last block ends
if == 0, the next block source address starts from where the last block ends
*/
int32_t DestBlockAddressOffset; /*!< this field specifies the Next block destination address offset
signed value : if > 0 then increment the next block destination Address by offset from where the last block ends
if < 0 then decrement the next block destination Address by offset from where the last block ends
if == 0, the next block destination address starts from where the last block ends
*/
}MDMA_InitTypeDef;
/**
* @brief HAL MDMA linked list node structure definition
* @note The Linked list node allows to define a new MDMA configuration
* (CTCR ,CBNDTR ,CSAR ,CDAR ,CBRUR, CLAR, CTBR, CMAR and CMDR registers).
* When CLAR register is configured to a non NULL value , each time a transfer ends,
* a new configuration (linked list node) is automatically loaded from the address given in CLAR register.
*/
typedef struct
{
__IO uint32_t CTCR; /*!< New CTCR register configuration for the given MDMA linked list node */
__IO uint32_t CBNDTR; /*!< New CBNDTR register configuration for the given MDMA linked list node */
__IO uint32_t CSAR; /*!< New CSAR register configuration for the given MDMA linked list node */
__IO uint32_t CDAR; /*!< New CDAR register configuration for the given MDMA linked list node */
__IO uint32_t CBRUR; /*!< New CBRUR register configuration for the given MDMA linked list node */
__IO uint32_t CLAR; /*!< New CLAR register configuration for the given MDMA linked list node */
__IO uint32_t CTBR; /*!< New CTBR register configuration for the given MDMA linked list node */
__IO uint32_t Reserved; /*!< Reserved register */
__IO uint32_t CMAR; /*!< New CMAR register configuration for the given MDMA linked list node */
__IO uint32_t CMDR; /*!< New CMDR register configuration for the given MDMA linked list node */
}MDMA_LinkNodeTypeDef;
/**
* @brief HAL MDMA linked list node configuration structure definition
* @note used with HAL_MDMA_LinkedList_CreateNode function
*/
typedef struct
{
MDMA_InitTypeDef Init; /*!< configuration of the specified MDMA Linked List Node */
uint32_t SrcAddress; /*!< The source memory address for the Linked list Node */
uint32_t DstAddress; /*!< The destination memory address for the Linked list Node */
uint32_t BlockDataLength; /*!< The data length of a block in bytes */
uint32_t BlockCount; /*!< The number of blocks to be transferred */
uint32_t PostRequestMaskAddress; /*!< specifies the address to be updated (written) with PostRequestMaskData after a request is served.
PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served */
uint32_t PostRequestMaskData; /*!< specifies the value to be written to PostRequestMaskAddress after a request is served.
PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served */
}MDMA_LinkNodeConfTypeDef;
/**
* @brief HAL MDMA State structure definition
*/
typedef enum
{
HAL_MDMA_STATE_RESET = 0x00U, /*!< MDMA not yet initialized or disabled */
HAL_MDMA_STATE_READY = 0x01U, /*!< MDMA initialized and ready for use */
HAL_MDMA_STATE_BUSY = 0x02U, /*!< MDMA process is ongoing */
HAL_MDMA_STATE_ERROR = 0x03U, /*!< MDMA error state */
HAL_MDMA_STATE_ABORT = 0x04U, /*!< MDMA Abort state */
}HAL_MDMA_StateTypeDef;
/**
* @brief HAL MDMA Level Complete structure definition
*/
typedef enum
{
HAL_MDMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
HAL_MDMA_BUFFER_TRANSFER = 0x01U, /*!< Buffer Transfer */
HAL_MDMA_BLOCK_TRANSFER = 0x02U, /*!< Block Transfer */
HAL_MDMA_REPEAT_BLOCK_TRANSFER = 0x03U /*!< repeat block Transfer */
}HAL_MDMA_LevelCompleteTypeDef;
/**
* @brief HAL MDMA Callbacks IDs structure definition
*/
typedef enum
{
HAL_MDMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
HAL_MDMA_XFER_BUFFERCPLT_CB_ID = 0x01U, /*!< Buffer Transfer */
HAL_MDMA_XFER_BLOCKCPLT_CB_ID = 0x02U, /*!< Block Transfer */
HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID = 0x03U, /*!< Repeated Block Transfer */
HAL_MDMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
HAL_MDMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
HAL_MDMA_XFER_ALL_CB_ID = 0x06U /*!< All */
}HAL_MDMA_CallbackIDTypeDef;
/**
* @brief MDMA handle Structure definition
*/
typedef struct __MDMA_HandleTypeDef
{
MDMA_Channel_TypeDef *Instance; /*!< Register base address */
MDMA_InitTypeDef Init; /*!< MDMA communication parameters */
HAL_LockTypeDef Lock; /*!< MDMA locking object */
__IO HAL_MDMA_StateTypeDef State; /*!< MDMA transfer state */
void *Parent; /*!< Parent object state */
void (* XferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer complete callback */
void (* XferBufferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA buffer transfer complete callback */
void (* XferBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer complete callback */
void (* XferRepeatBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer repeat callback */
void (* XferErrorCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer error callback */
void (* XferAbortCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer Abort callback */
MDMA_LinkNodeTypeDef *FirstLinkedListNodeAddress; /*!< specifies the first node address of the transfer list
(after the initial node defined by the Init struct)
this parameter is used internally by the MDMA driver
to construct the linked list node
*/
MDMA_LinkNodeTypeDef *LastLinkedListNodeAddress; /*!< specifies the last node address of the transfer list
this parameter is used internally by the MDMA driver
to construct the linked list node
*/
uint32_t LinkedListNodeCounter; /*!< Number of nodes in the MDMA linked list */
__IO uint32_t ErrorCode; /*!< MDMA Error code */
} MDMA_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup MDMA_Exported_Constants MDMA Exported Constants
* @brief MDMA Exported constants
* @{
*/
/** @defgroup MDMA_Error_Codes MDMA Error Codes
* @brief MDMA Error Codes
* @{
*/
#define HAL_MDMA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
#define HAL_MDMA_ERROR_READ_XFER ((uint32_t)0x00000001U) /*!< Read Transfer error */
#define HAL_MDMA_ERROR_WRITE_XFER ((uint32_t)0x00000002U) /*!< Write Transfer error */
#define HAL_MDMA_ERROR_MASK_DATA ((uint32_t)0x00000004U) /*!< Error Mask Data error */
#define HAL_MDMA_ERROR_LINKED_LIST ((uint32_t)0x00000008U) /*!< Linked list Data error */
#define HAL_MDMA_ERROR_ALIGNMENT ((uint32_t)0x00000010U) /*!< Address/Size alignment error */
#define HAL_MDMA_ERROR_BLOCK_SIZE ((uint32_t)0x00000020U) /*!< Block Size error */
#define HAL_MDMA_ERROR_TIMEOUT ((uint32_t)0x00000040U) /*!< Timeout error */
#define HAL_MDMA_ERROR_NO_XFER ((uint32_t)0x00000080U) /*!< Abort or SW trigger requested with no Xfer ongoing */
#define HAL_MDMA_ERROR_BUSY ((uint32_t)0x00000100U) /*!< DeInit or SW trigger requested with Xfer ongoing */
/**
* @}
*/
/** @defgroup MDMA_Request_selection MDMA Request selection
* @brief MDMA_Request_selection
* @{
*/
#define MDMA_REQUEST_DMA1_Stream0_TC ((uint32_t)0x00000000U) /*!< MDMA HW request is DMA1 Stream 0 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream1_TC ((uint32_t)0x00000001U) /*!< MDMA HW request is DMA1 Stream 1 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream2_TC ((uint32_t)0x00000002U) /*!< MDMA HW request is DMA1 Stream 2 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream3_TC ((uint32_t)0x00000003U) /*!< MDMA HW request is DMA1 Stream 3 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream4_TC ((uint32_t)0x00000004U) /*!< MDMA HW request is DMA1 Stream 4 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream5_TC ((uint32_t)0x00000005U) /*!< MDMA HW request is DMA1 Stream 5 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream6_TC ((uint32_t)0x00000006U) /*!< MDMA HW request is DMA1 Stream 6 Transfer Complete Flag */
#define MDMA_REQUEST_DMA1_Stream7_TC ((uint32_t)0x00000007U) /*!< MDMA HW request is DMA1 Stream 7 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream0_TC ((uint32_t)0x00000008U) /*!< MDMA HW request is DMA2 Stream 0 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream1_TC ((uint32_t)0x00000009U) /*!< MDMA HW request is DMA2 Stream 1 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream2_TC ((uint32_t)0x0000000AU) /*!< MDMA HW request is DMA2 Stream 2 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream3_TC ((uint32_t)0x0000000BU) /*!< MDMA HW request is DMA2 Stream 3 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream4_TC ((uint32_t)0x0000000CU) /*!< MDMA HW request is DMA2 Stream 4 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream5_TC ((uint32_t)0x0000000DU) /*!< MDMA HW request is DMA2 Stream 5 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream6_TC ((uint32_t)0x0000000EU) /*!< MDMA HW request is DMA2 Stream 6 Transfer Complete Flag */
#define MDMA_REQUEST_DMA2_Stream7_TC ((uint32_t)0x0000000FU) /*!< MDMA HW request is DMA2 Stream 7 Transfer Complete Flag */
#if defined (LTDC)
#define MDMA_REQUEST_LTDC_LINE_IT ((uint32_t)0x00000010U) /*!< MDMA HW request is LTDC Line interrupt Flag */
#endif /* LTDC */
#if defined (JPEG)
#define MDMA_REQUEST_JPEG_INFIFO_TH ((uint32_t)0x00000011U) /*!< MDMA HW request is JPEG Input FIFO threshold Flag */
#define MDMA_REQUEST_JPEG_INFIFO_NF ((uint32_t)0x00000012U) /*!< MDMA HW request is JPEG Input FIFO not full Flag */
#define MDMA_REQUEST_JPEG_OUTFIFO_TH ((uint32_t)0x00000013U) /*!< MDMA HW request is JPEG Output FIFO threshold Flag */
#define MDMA_REQUEST_JPEG_OUTFIFO_NE ((uint32_t)0x00000014U) /*!< MDMA HW request is JPEG Output FIFO not empty Flag */
#define MDMA_REQUEST_JPEG_END_CONVERSION ((uint32_t)0x00000015U) /*!< MDMA HW request is JPEG End of conversion Flag */
#endif /* JPEG */
#if defined (OCTOSPI1)
#define MDMA_REQUEST_OCTOSPI1_FIFO_TH ((uint32_t)0x00000016U) /*!< MDMA HW request is OCTOSPI1 FIFO threshold Flag */
#define MDMA_REQUEST_OCTOSPI1_TC ((uint32_t)0x00000017U) /*!< MDMA HW request is OCTOSPI1 Transfer complete Flag */
#endif /* OCTOSPI1 */
#if defined (QUADSPI)
#define MDMA_REQUEST_QUADSPI_FIFO_TH ((uint32_t)0x00000016U) /*!< MDMA HW request is QSPI FIFO threshold Flag */
#define MDMA_REQUEST_QUADSPI_TC ((uint32_t)0x00000017U) /*!< MDMA HW request is QSPI Transfer complete Flag */
#endif /* QUADSPI */
#define MDMA_REQUEST_DMA2D_CLUT_TC ((uint32_t)0x00000018U) /*!< MDMA HW request is DMA2D CLUT Transfer Complete Flag */
#define MDMA_REQUEST_DMA2D_TC ((uint32_t)0x00000019U) /*!< MDMA HW request is DMA2D Transfer Complete Flag */
#define MDMA_REQUEST_DMA2D_TW ((uint32_t)0x0000001AU) /*!< MDMA HW request is DMA2D Transfer Watermark Flag */
#if defined (DSI)
#define MDMA_REQUEST_DSI_TEARING_EFFECT ((uint32_t)0x0000001BU) /*!< MDMA HW request is DSI Tearing Effect Flag */
#define MDMA_REQUEST_DSI_END_REFRESH ((uint32_t)0x0000001CU) /*!< MDMA HW request is DSI End of refresh Flag */
#endif /* DSI */
#define MDMA_REQUEST_SDMMC1_END_DATA ((uint32_t)0x0000001DU) /*!< MDMA HW request is SDMMC1 End of Data Flag */
#define MDMA_REQUEST_SDMMC1_DMA_ENDBUFFER ((uint32_t)0x0000001EU) /*!< MDMA HW request is SDMMC1 Internal DMA buffer End Flag */
#define MDMA_REQUEST_SDMMC1_COMMAND_END ((uint32_t)0x0000001FU) /*!< MDMA HW request is SDMMC1 Command End Flag */
#if defined (OCTOSPI2)
#define MDMA_REQUEST_OCTOSPI2_FIFO_TH ((uint32_t)0x00000020U) /*!< MDMA HW request is OCTOSPI2 FIFO threshold Flag */
#define MDMA_REQUEST_OCTOSPI2_TC ((uint32_t)0x00000021U) /*!< MDMA HW request is OCTOSPI2 Transfer complete Flag */
#endif /* OCTOSPI2 */
#define MDMA_REQUEST_SW ((uint32_t)0x40000000U) /*!< MDMA SW request */
/**
* @}
*/
/** @defgroup MDMA_Transfer_TriggerMode MDMA Transfer Trigger Mode
* @brief MDMA Transfer Trigger Mode
* @{
*/
#define MDMA_BUFFER_TRANSFER ((uint32_t)0x00000000U) /*!< Each MDMA request (SW or HW) triggers a buffer transfer */
#define MDMA_BLOCK_TRANSFER ((uint32_t)MDMA_CTCR_TRGM_0) /*!< Each MDMA request (SW or HW) triggers a block transfer */
#define MDMA_REPEAT_BLOCK_TRANSFER ((uint32_t)MDMA_CTCR_TRGM_1) /*!< Each MDMA request (SW or HW) triggers a repeated block transfer */
#define MDMA_FULL_TRANSFER ((uint32_t)MDMA_CTCR_TRGM) /*!< Each MDMA request (SW or HW) triggers a Full transfer or a linked list transfer if any */
/**
* @}
*/
/** @defgroup MDMA_Priority_level MDMA Priority level
* @brief MDMA Priority level
* @{
*/
#define MDMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level: Low */
#define MDMA_PRIORITY_MEDIUM ((uint32_t)MDMA_CCR_PL_0) /*!< Priority level: Medium */
#define MDMA_PRIORITY_HIGH ((uint32_t)MDMA_CCR_PL_1) /*!< Priority level: High */
#define MDMA_PRIORITY_VERY_HIGH ((uint32_t)MDMA_CCR_PL) /*!< Priority level: Very High */
/**
* @}
*/
/** @defgroup MDMA_Endianness MDMA Endianness
* @brief MDMA Endianness
* @{
*/
#define MDMA_LITTLE_ENDIANNESS_PRESERVE ((uint32_t)0x00000000U) /*!< little endianness preserve */
#define MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_BEX) /*!< BYTEs endianness exchange when destination data size is > Byte */
#define MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_HEX) /*!< HALF WORDs endianness exchange when destination data size is > HALF WORD */
#define MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_WEX) /*!< WORDs endianness exchange when destination data size is > DOUBLE WORD */
/**
* @}
*/
/** @defgroup MDMA_Source_increment_mode MDMA Source increment mode
* @brief MDMA Source increment mode
* @{
*/
#define MDMA_SRC_INC_DISABLE ((uint32_t)0x00000000U) /*!< Source address pointer is fixed */
#define MDMA_SRC_INC_BYTE ((uint32_t)MDMA_CTCR_SINC_1) /*!< Source address pointer is incremented by a BYTE (8 bits) */
#define MDMA_SRC_INC_HALFWORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits) */
#define MDMA_SRC_INC_WORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits) */
#define MDMA_SRC_INC_DOUBLEWORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS) /*!< Source address pointer is incremented by a double Word (64 bits)) */
#define MDMA_SRC_DEC_BYTE ((uint32_t)MDMA_CTCR_SINC) /*!< Source address pointer is decremented by a BYTE (8 bits) */
#define MDMA_SRC_DEC_HALFWORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is decremented by a half Word (16 bits) */
#define MDMA_SRC_DEC_WORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is decremented by a Word (32 bits) */
#define MDMA_SRC_DEC_DOUBLEWORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS) /*!< Source address pointer is decremented by a double Word (64 bits)) */
/**
* @}
*/
/** @defgroup MDMA_Destination_increment_mode MDMA Destination increment mode
* @brief MDMA Destination increment mode
* @{
*/
#define MDMA_DEST_INC_DISABLE ((uint32_t)0x00000000U) /*!< Source address pointer is fixed */
#define MDMA_DEST_INC_BYTE ((uint32_t)MDMA_CTCR_DINC_1) /*!< Source address pointer is incremented by a BYTE (8 bits) */
#define MDMA_DEST_INC_HALFWORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits) */
#define MDMA_DEST_INC_WORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits) */
#define MDMA_DEST_INC_DOUBLEWORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS) /*!< Source address pointer is incremented by a double Word (64 bits)) */
#define MDMA_DEST_DEC_BYTE ((uint32_t)MDMA_CTCR_DINC) /*!< Source address pointer is decremented by a BYTE (8 bits) */
#define MDMA_DEST_DEC_HALFWORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is decremented by a half Word (16 bits) */
#define MDMA_DEST_DEC_WORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is decremented by a Word (32 bits) */
#define MDMA_DEST_DEC_DOUBLEWORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS) /*!< Source address pointer is decremented by a double Word (64 bits)) */
/**
* @}
*/
/** @defgroup MDMA_Source_data_size MDMA Source data size
* @brief MDMA Source data size
* @{
*/
#define MDMA_SRC_DATASIZE_BYTE ((uint32_t)0x00000000U) /*!< Source data size is Byte */
#define MDMA_SRC_DATASIZE_HALFWORD ((uint32_t)MDMA_CTCR_SSIZE_0) /*!< Source data size is half word */
#define MDMA_SRC_DATASIZE_WORD ((uint32_t)MDMA_CTCR_SSIZE_1) /*!< Source data size is word */
#define MDMA_SRC_DATASIZE_DOUBLEWORD ((uint32_t)MDMA_CTCR_SSIZE) /*!< Source data size is double word */
/**
* @}
*/
/** @defgroup MDMA_Destination_data_size MDMA Destination data size
* @brief MDMA Destination data size
* @{
*/
#define MDMA_DEST_DATASIZE_BYTE ((uint32_t)0x00000000U) /*!< Destination data size is Byte */
#define MDMA_DEST_DATASIZE_HALFWORD ((uint32_t)MDMA_CTCR_DSIZE_0) /*!< Destination data size is half word */
#define MDMA_DEST_DATASIZE_WORD ((uint32_t)MDMA_CTCR_DSIZE_1) /*!< Destination data size is word */
#define MDMA_DEST_DATASIZE_DOUBLEWORD ((uint32_t)MDMA_CTCR_DSIZE) /*!< Destination data size is double word */
/**
* @}
*/
/** @defgroup MDMA_data_Alignment MDMA data alignment
* @brief MDMA data alignment
* @{
*/
#define MDMA_DATAALIGN_PACKENABLE ((uint32_t)MDMA_CTCR_PKE) /*!< The source data is packed/un-packed into the destination data size
All data are right aligned, in Little Endien mode. */
#define MDMA_DATAALIGN_RIGHT ((uint32_t)0x00000000U) /*!< Right Aligned, padded w/ 0s (default) */
#define MDMA_DATAALIGN_RIGHT_SIGNED ((uint32_t)MDMA_CTCR_PAM_0) /*!< Right Aligned, Sign extended ,
Note : this mode is allowed only if the Source data size is smaller than Destination data size */
#define MDMA_DATAALIGN_LEFT ((uint32_t)MDMA_CTCR_PAM_1) /*!< Left Aligned (padded with 0s) */
/**
* @}
*/
/** @defgroup MDMA_Source_burst MDMA Source burst
* @brief MDMA Source burst
* @{
*/
#define MDMA_SOURCE_BURST_SINGLE ((uint32_t)0x00000000U) /*!< single transfer */
#define MDMA_SOURCE_BURST_2BEATS ((uint32_t)MDMA_CTCR_SBURST_0) /*!< Burst 2 beats */
#define MDMA_SOURCE_BURST_4BEATS ((uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 4 beats */
#define MDMA_SOURCE_BURST_8BEATS ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 8 beats */
#define MDMA_SOURCE_BURST_16BEATS ((uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 16 beats */
#define MDMA_SOURCE_BURST_32BEATS ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 32 beats */
#define MDMA_SOURCE_BURST_64BEATS ((uint32_t)MDMA_CTCR_SBURST_1 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 64 beats */
#define MDMA_SOURCE_BURST_128BEATS ((uint32_t)MDMA_CTCR_SBURST) /*!< Burst 128 beats */
/**
* @}
*/
/** @defgroup MDMA_Destination_burst MDMA Destination burst
* @brief MDMA Destination burst
* @{
*/
#define MDMA_DEST_BURST_SINGLE ((uint32_t)0x00000000U) /*!< single transfer */
#define MDMA_DEST_BURST_2BEATS ((uint32_t)MDMA_CTCR_DBURST_0) /*!< Burst 2 beats */
#define MDMA_DEST_BURST_4BEATS ((uint32_t)MDMA_CTCR_DBURST_1) /*!< Burst 4 beats */
#define MDMA_DEST_BURST_8BEATS ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_1) /*!< Burst 8 beats */
#define MDMA_DEST_BURST_16BEATS ((uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 16 beats */
#define MDMA_DEST_BURST_32BEATS ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 32 beats */
#define MDMA_DEST_BURST_64BEATS ((uint32_t)MDMA_CTCR_DBURST_1 | (uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 64 beats */
#define MDMA_DEST_BURST_128BEATS ((uint32_t)MDMA_CTCR_DBURST) /*!< Burst 128 beats */
/**
* @}
*/
/** @defgroup MDMA_interrupt_enable_definitions MDMA interrupt enable definitions
* @brief MDMA interrupt enable definitions
* @{
*/
#define MDMA_IT_TE ((uint32_t)MDMA_CCR_TEIE) /*!< Transfer Error interrupt */
#define MDMA_IT_CTC ((uint32_t)MDMA_CCR_CTCIE) /*!< Channel Transfer Complete interrupt */
#define MDMA_IT_BRT ((uint32_t)MDMA_CCR_BRTIE) /*!< Block Repeat Transfer interrupt */
#define MDMA_IT_BT ((uint32_t)MDMA_CCR_BTIE) /*!< Block Transfer interrupt */
#define MDMA_IT_BFTC ((uint32_t)MDMA_CCR_TCIE) /*!< Buffer Transfer Complete interrupt */
/**
* @}
*/
/** @defgroup MDMA_flag_definitions MDMA flag definitions
* @brief MDMA flag definitions
* @{
*/
#define MDMA_FLAG_TE ((uint32_t)MDMA_CISR_TEIF) /*!< Transfer Error flag */
#define MDMA_FLAG_CTC ((uint32_t)MDMA_CISR_CTCIF) /*!< Channel Transfer Complete flag */
#define MDMA_FLAG_BRT ((uint32_t)MDMA_CISR_BRTIF) /*!< Block Repeat Transfer complete flag */
#define MDMA_FLAG_BT ((uint32_t)MDMA_CISR_BTIF) /*!< Block Transfer complete flag */
#define MDMA_FLAG_BFTC ((uint32_t)MDMA_CISR_TCIF) /*!< BuFfer Transfer complete flag */
#define MDMA_FLAG_CRQA ((uint32_t)MDMA_CISR_CRQA) /*!< Channel ReQest Active flag */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup MDMA_Exported_Macros MDMA Exported Macros
* @{
*/
/**
* @brief Enable the specified MDMA Channel.
* @param __HANDLE__: MDMA handle
* @retval None
*/
#define __HAL_MDMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= MDMA_CCR_EN)
/**
* @brief Disable the specified MDMA Channel.
* @param __HANDLE__: MDMA handle
* @retval None
*/
#define __HAL_MDMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~MDMA_CCR_EN)
/**
* @brief Get the MDMA Channel pending flags.
* @param __HANDLE__: MDMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
* @arg MDMA_FLAG_TE : Transfer Error flag.
* @arg MDMA_FLAG_CTC : Channel Transfer Complete flag.
* @arg MDMA_FLAG_BRT : Block Repeat Transfer flag.
* @arg MDMA_FLAG_BT : Block Transfer complete flag.
* @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag.
* @arg MDMA_FLAG_CRQA : Channel ReQest Active flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __HAL_MDMA_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CISR & (__FLAG__))
/**
* @brief Clear the MDMA Stream pending flags.
* @param __HANDLE__: MDMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg MDMA_FLAG_TE : Transfer Error flag.
* @arg MDMA_FLAG_CTC : Channel Transfer Complete flag.
* @arg MDMA_FLAG_BRT : Block Repeat Transfer flag.
* @arg MDMA_FLAG_BT : Block Transfer complete flag.
* @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag.
* @retval None
*/
#define __HAL_MDMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CIFCR = (__FLAG__))
/**
* @brief Enables the specified MDMA Channel interrupts.
* @param __HANDLE__: MDMA handle
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg MDMA_IT_TE : Transfer Error interrupt mask
* @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask
* @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask
* @arg MDMA_IT_BT : Block Transfer interrupt mask
* @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask
* @retval None
*/
#define __HAL_MDMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
/**
* @brief Disables the specified MDMA Channel interrupts.
* @param __HANDLE__: MDMA handle
* @param __INTERRUPT__: specifies the MDMA interrupt sources to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg MDMA_IT_TE : Transfer Error interrupt mask
* @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask
* @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask
* @arg MDMA_IT_BT : Block Transfer interrupt mask
* @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask
* @retval None
*/
#define __HAL_MDMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
/**
* @brief Checks whether the specified MDMA Channel interrupt is enabled or not.
* @param __HANDLE__: MDMA handle
* @param __INTERRUPT__: specifies the MDMA interrupt source to check.
* @arg MDMA_IT_TE : Transfer Error interrupt mask
* @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask
* @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask
* @arg MDMA_IT_BT : Block Transfer interrupt mask
* @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask
* @retval The state of MDMA_IT (SET or RESET).
*/
#define __HAL_MDMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
/**
* @brief Writes the number of data in bytes to be transferred on the MDMA Channelx.
* @param __HANDLE__ : MDMA handle
* @param __COUNTER__: Number of data in bytes to be transferred.
* @retval None
*/
#define __HAL_MDMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CBNDTR |= ((__COUNTER__) & MDMA_CBNDTR_BNDT))
/**
* @brief Returns the number of remaining data in bytes in the current MDMA Channelx transfer.
* @param __HANDLE__ : MDMA handle
* @retval The number of remaining data in bytes in the current MDMA Channelx transfer.
*/
#define __HAL_MDMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CBNDTR & MDMA_CBNDTR_BNDT)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup MDMA_Exported_Functions MDMA Exported Functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
/** @defgroup MDMA_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and de-initialization functions
* @{
*/
HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma);
HAL_StatusTypeDef HAL_MDMA_DeInit (MDMA_HandleTypeDef *hmdma);
HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData);
HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma));
HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID);
/**
* @}
*/
/* Linked list operation functions ********************************************/
/** @defgroup MDMA_Exported_Functions_Group2 Linked List operation functions
* @brief Linked list operation functions
* @{
*/
HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig);
HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode);
HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode);
HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma);
HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma);
/**
* @}
*/
/* IO operation functions *****************************************************/
/** @defgroup MDMA_Exported_Functions_Group3 I/O operation functions
* @brief I/O operation functions
* @{
*/
HAL_StatusTypeDef HAL_MDMA_Start (MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount);
HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount);
HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma);
HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma);
HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma);
void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma);
/**
* @}
*/
/* Peripheral State and Error functions ***************************************/
/** @defgroup MDMA_Exported_Functions_Group4 Peripheral State functions
* @brief Peripheral State functions
* @{
*/
HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma);
uint32_t HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/** @defgroup MDMA_Private_Types MDMA Private Types
* @{
*/
/**
* @}
*/
/* Private defines -----------------------------------------------------------*/
/** @defgroup MDMA_Private_Defines MDMA Private Defines
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup MDMA_Private_Variables MDMA Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup MDMA_Private_Constants MDMA Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup MDMA_Private_Macros MDMA Private Macros
* @{
*/
#define IS_MDMA_LEVEL_COMPLETE(__LEVEL__) (((__LEVEL__) == HAL_MDMA_FULL_TRANSFER ) || \
((__LEVEL__) == HAL_MDMA_BUFFER_TRANSFER )|| \
((__LEVEL__) == HAL_MDMA_BLOCK_TRANSFER ) || \
((__LEVEL__) == HAL_MDMA_REPEAT_BLOCK_TRANSFER ))
#define IS_MDMA_PRIORITY(__PRIORITY__) (((__PRIORITY__) == MDMA_PRIORITY_LOW ) || \
((__PRIORITY__) == MDMA_PRIORITY_MEDIUM) || \
((__PRIORITY__) == MDMA_PRIORITY_HIGH) || \
((__PRIORITY__) == MDMA_PRIORITY_VERY_HIGH))
#define IS_MDMA_ENDIANNESS_MODE(__ENDIANNESS__) (((__ENDIANNESS__) == MDMA_LITTLE_ENDIANNESS_PRESERVE ) || \
((__ENDIANNESS__) == MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE) || \
((__ENDIANNESS__) == MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE) || \
((__ENDIANNESS__) == MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE))
#if defined (OCTOSPI2)
#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_OCTOSPI2_TC))
#else
#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_SDMMC1_COMMAND_END))
#endif /* OCTOSPI2 */
#define IS_MDMA_SOURCE_INC(__INC__) (((__INC__) == MDMA_SRC_INC_DISABLE ) || \
((__INC__) == MDMA_SRC_INC_BYTE ) || \
((__INC__) == MDMA_SRC_INC_HALFWORD ) || \
((__INC__) == MDMA_SRC_INC_WORD ) || \
((__INC__) == MDMA_SRC_INC_DOUBLEWORD) || \
((__INC__) == MDMA_SRC_DEC_BYTE) || \
((__INC__) == MDMA_SRC_DEC_HALFWORD) || \
((__INC__) == MDMA_SRC_DEC_WORD) || \
((__INC__) == MDMA_SRC_DEC_DOUBLEWORD))
#define IS_MDMA_DESTINATION_INC(__INC__) (((__INC__) == MDMA_DEST_INC_DISABLE ) || \
((__INC__) == MDMA_DEST_INC_BYTE ) || \
((__INC__) == MDMA_DEST_INC_HALFWORD ) || \
((__INC__) == MDMA_DEST_INC_WORD ) || \
((__INC__) == MDMA_DEST_INC_DOUBLEWORD) || \
((__INC__) == MDMA_DEST_DEC_BYTE) || \
((__INC__) == MDMA_DEST_DEC_HALFWORD) || \
((__INC__) == MDMA_DEST_DEC_WORD) || \
((__INC__) == MDMA_DEST_DEC_DOUBLEWORD))
#define IS_MDMA_SOURCE_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_SRC_DATASIZE_BYTE ) || \
((__SIZE__) == MDMA_SRC_DATASIZE_HALFWORD ) || \
((__SIZE__) == MDMA_SRC_DATASIZE_WORD ) || \
((__SIZE__) == MDMA_SRC_DATASIZE_DOUBLEWORD))
#define IS_MDMA_DESTINATION_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_DEST_DATASIZE_BYTE ) || \
((__SIZE__) == MDMA_DEST_DATASIZE_HALFWORD ) || \
((__SIZE__) == MDMA_DEST_DATASIZE_WORD ) || \
((__SIZE__) == MDMA_DEST_DATASIZE_DOUBLEWORD))
#define IS_MDMA_DATA_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == MDMA_DATAALIGN_PACKENABLE ) || \
((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT ) || \
((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT_SIGNED ) || \
((__ALIGNMENT__) == MDMA_DATAALIGN_LEFT))
#define IS_MDMA_SOURCE_BURST(__BURST__) (((__BURST__) == MDMA_SOURCE_BURST_SINGLE ) || \
((__BURST__) == MDMA_SOURCE_BURST_2BEATS ) || \
((__BURST__) == MDMA_SOURCE_BURST_4BEATS ) || \
((__BURST__) == MDMA_SOURCE_BURST_8BEATS) || \
((__BURST__) == MDMA_SOURCE_BURST_16BEATS) || \
((__BURST__) == MDMA_SOURCE_BURST_32BEATS) || \
((__BURST__) == MDMA_SOURCE_BURST_64BEATS) || \
((__BURST__) == MDMA_SOURCE_BURST_128BEATS))
#define IS_MDMA_DESTINATION_BURST(__BURST__) (((__BURST__) == MDMA_DEST_BURST_SINGLE ) || \
((__BURST__) == MDMA_DEST_BURST_2BEATS ) || \
((__BURST__) == MDMA_DEST_BURST_4BEATS ) || \
((__BURST__) == MDMA_DEST_BURST_8BEATS) || \
((__BURST__) == MDMA_DEST_BURST_16BEATS) || \
((__BURST__) == MDMA_DEST_BURST_32BEATS) || \
((__BURST__) == MDMA_DEST_BURST_64BEATS) || \
((__BURST__) == MDMA_DEST_BURST_128BEATS))
#define IS_MDMA_TRANSFER_TRIGGER_MODE(__MODE__) (((__MODE__) == MDMA_BUFFER_TRANSFER ) || \
((__MODE__) == MDMA_BLOCK_TRANSFER ) || \
((__MODE__) == MDMA_REPEAT_BLOCK_TRANSFER ) || \
((__MODE__) == MDMA_FULL_TRANSFER))
#define IS_MDMA_BUFFER_TRANSFER_LENGTH(__LENGTH__) (((__LENGTH__) >= 0x00000001U) && ((__LENGTH__) < 0x000000FFU))
#define IS_MDMA_BLOCK_COUNT(__COUNT__) (((__COUNT__) > 0U ) && ((__COUNT__) <= 4096U))
#define IS_MDMA_TRANSFER_LENGTH(SIZE) (((SIZE) > 0U) && ((SIZE) <= 65536U))
#define IS_MDMA_BLOCK_ADDR_OFFSET(__BLOCK_ADD_OFFSET__) (((__BLOCK_ADD_OFFSET__) > (-65536)) && ((__BLOCK_ADD_OFFSET__) < 65536))
/**
* @}
*/
/* Private functions prototypes ----------------------------------------------*/
/** @defgroup MDMA_Private_Functions_Prototypes MDMA Private Functions Prototypes
* @{
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup MDMA_Private_Functions MDMA Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_MDMA_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

428
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd.h Normal file
View File

@@ -0,0 +1,428 @@
/**
******************************************************************************
* @file stm32h7xx_hal_pcd.h
* @author MCD Application Team
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_PCD_H
#define STM32H7xx_HAL_PCD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_ll_usb.h"
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup PCD
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PCD_Exported_Types PCD Exported Types
* @{
*/
/**
* @brief PCD State structure definition
*/
typedef enum
{
HAL_PCD_STATE_RESET = 0x00,
HAL_PCD_STATE_READY = 0x01,
HAL_PCD_STATE_ERROR = 0x02,
HAL_PCD_STATE_BUSY = 0x03,
HAL_PCD_STATE_TIMEOUT = 0x04
} PCD_StateTypeDef;
/* Device LPM suspend state */
typedef enum
{
LPM_L0 = 0x00, /* on */
LPM_L1 = 0x01, /* LPM L1 sleep */
LPM_L2 = 0x02, /* suspend */
LPM_L3 = 0x03, /* off */
} PCD_LPM_StateTypeDef;
typedef enum
{
PCD_LPM_L0_ACTIVE = 0x00, /* on */
PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
} PCD_LPM_MsgTypeDef;
typedef enum
{
PCD_BCD_ERROR = 0xFF,
PCD_BCD_CONTACT_DETECTION = 0xFE,
PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD,
PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC,
PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB,
PCD_BCD_DISCOVERY_COMPLETED = 0x00,
} PCD_BCD_MsgTypeDef;
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
typedef USB_OTG_EPTypeDef PCD_EPTypeDef;
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/**
* @brief PCD Handle Structure definition
*/
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
typedef struct __PCD_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
{
PCD_TypeDef *Instance; /*!< Register base address */
PCD_InitTypeDef Init; /*!< PCD required parameters */
__IO uint8_t USB_Address; /*!< USB Address */
PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */
PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */
HAL_LockTypeDef Lock; /*!< PCD peripheral status */
__IO PCD_StateTypeDef State; /*!< PCD communication state */
__IO uint32_t ErrorCode; /*!< PCD Error code */
uint32_t Setup[12]; /*!< Setup packet buffer */
PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
uint32_t BESL;
uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
This parameter can be set to ENABLE or DISABLE */
uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
This parameter can be set to ENABLE or DISABLE */
void *pData; /*!< Pointer to upper stack Handler */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */
void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */
void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */
void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */
void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */
void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */
void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */
void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */
void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */
void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */
void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */
void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */
void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */
void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */
void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
} PCD_HandleTypeDef;
/**
* @}
*/
/* Include PCD HAL Extended module */
#include "stm32h7xx_hal_pcd_ex.h"
/* Exported constants --------------------------------------------------------*/
/** @defgroup PCD_Exported_Constants PCD Exported Constants
* @{
*/
/** @defgroup PCD_Speed PCD Speed
* @{
*/
#define PCD_SPEED_HIGH USBD_HS_SPEED
#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED
#define PCD_SPEED_FULL USBD_FS_SPEED
/**
* @}
*/
/** @defgroup PCD_PHY_Module PCD PHY Module
* @{
*/
#define PCD_PHY_ULPI 1U
#define PCD_PHY_EMBEDDED 2U
#define PCD_PHY_UTMI 3U
/**
* @}
*/
/** @defgroup PCD_Error_Code_definition PCD Error Code definition
* @brief PCD Error Code definition
* @{
*/
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup PCD_Exported_Macros PCD Exported Macros
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
~(USB_OTG_PCGCCTL_STOPCLK)
#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI_D1->IMR2 |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI_D1->IMR2 &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI_D1->IMR2 |= (USB_OTG_FS_WAKEUP_EXTI_LINE)
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI_D1->IMR2 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PCD_Exported_Functions PCD Exported Functions
* @{
*/
/* Initialization/de-initialization functions ********************************/
/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
* @brief HAL USB OTG PCD Callback ID enumeration definition
* @{
*/
typedef enum
{
HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */
HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */
HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */
HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */
HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */
HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */
HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */
HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */
HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */
} HAL_PCD_CallbackIDTypeDef;
/**
* @}
*/
/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
* @brief HAL USB OTG PCD Callback pointer definition
* @{
*/
typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */
typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */
typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */
typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */
typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */
typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */
/**
* @}
*/
HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
/**
* @}
*/
/* I/O operation functions ***************************************************/
/* Non-Blocking mode: Interrupt */
/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
* @{
*/
HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
/**
* @}
*/
/* Peripheral Control functions **********************************************/
/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
* @{
*/
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/* Peripheral State functions ************************************************/
/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
* @{
*/
PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup PCD_Private_Constants PCD Private Constants
* @{
*/
/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 12) /*!< USB FS EXTI Line WakeUp Interrupt */
#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 11) /*!< USB HS EXTI Line WakeUp Interrupt */
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/**
* @}
*/
/**
* @}
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
#ifndef USB_OTG_DOEPINT_OTEPSPR
#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */
#endif
#ifndef USB_OTG_DOEPMSK_OTEPSPRM
#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */
#endif
#ifndef USB_OTG_DOEPINT_NAK
#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */
#endif
#ifndef USB_OTG_DOEPMSK_NAKM
#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */
#endif
#ifndef USB_OTG_DOEPINT_STPKTRX
#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */
#endif
#ifndef USB_OTG_DOEPMSK_NYETM
#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */
#endif
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/* Private macros ------------------------------------------------------------*/
/** @defgroup PCD_Private_Macros PCD Private Macros
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_PCD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

91
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd_ex.h Normal file
View File

@@ -0,0 +1,91 @@
/**
******************************************************************************
* @file stm32h7xx_hal_pcd_ex.h
* @author MCD Application Team
* @brief Header file of PCD HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_PCD_EX_H
#define STM32H7xx_HAL_PCD_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup PCDEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macros -----------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
* @{
*/
/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_PCD_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

811
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h Normal file
View File

@@ -0,0 +1,811 @@
/**
******************************************************************************
* @file stm32h7xx_hal_pwr.h
* @author MCD Application Team
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_PWR_H
#define STM32H7xx_HAL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Types PWR Exported Types
* @{
*/
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This
parameter can be a value of @ref
PWR_PVD_detection_level.
*/
uint32_t Mode; /*!< Mode: Specifies the EXTI operating mode for the PVD
event. This parameter can be a value of @ref
PWR_PVD_Mode.
*/
}PWR_PVDTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
* @{
*/
#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Programmable voltage detector
level 0 selection : 1V95 */
#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Programmable voltage detector
level 1 selection : 2V1 */
#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Programmable voltage detector
level 2 selection : 2V25 */
#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Programmable voltage detector
level 3 selection : 2V4 */
#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Programmable voltage detector
level 4 selection : 2V55 */
#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Programmable voltage detector
level 5 selection : 2V7 */
#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Programmable voltage detector
level 6 selection : 2V85 */
#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External input analog voltage
(Compare internally to VREF) */
/**
* @}
*/
/** @defgroup PWR_PVD_Mode PWR PVD Mode
* @{
*/
#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< Interrupt Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< Interrupt Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
* @{
*/
#define PWR_MAINREGULATOR_ON (0U)
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
/**
* @}
*/
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
* @{
*/
#define PWR_SLEEPENTRY_WFI (0x01U)
#define PWR_SLEEPENTRY_WFE (0x02U)
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
* @{
*/
#define PWR_STOPENTRY_WFI (0x01U)
#define PWR_STOPENTRY_WFE (0x02U)
/**
* @}
*/
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
* @{
*/
#if defined(PWR_SRDCR_VOS)
#define PWR_REGULATOR_VOLTAGE_SCALE0 (PWR_SRDCR_VOS_1 | PWR_SRDCR_VOS_0)
#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_SRDCR_VOS_1)
#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_SRDCR_VOS_0)
#define PWR_REGULATOR_VOLTAGE_SCALE3 (0U)
#else
#define PWR_REGULATOR_VOLTAGE_SCALE0 (0U)
#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_D3CR_VOS_1 | PWR_D3CR_VOS_0)
#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_D3CR_VOS_1)
#define PWR_REGULATOR_VOLTAGE_SCALE3 (PWR_D3CR_VOS_0)
#endif /* PWR_SRDCR_VOS */
/**
* @}
*/
/** @defgroup PWR_Flag PWR Flag
* @{
*/
/* PWR CPU flag */
#define PWR_FLAG_STOP (0x01U)
#if defined (PWR_CPUCR_SBF_D2)
#define PWR_FLAG_SB_D1 (0x02U)
#define PWR_FLAG_SB_D2 (0x03U)
#endif /* defined (PWR_CPUCR_SBF_D2) */
#define PWR_FLAG_SB (0x04U)
#if defined (DUAL_CORE)
#define PWR_FLAG_CPU_HOLD (0x05U)
#define PWR_FLAG_CPU2_HOLD (0x06U)
#define PWR_FLAG2_STOP (0x07U)
#define PWR_FLAG2_SB_D1 (0x08U)
#define PWR_FLAG2_SB_D2 (0x09U)
#define PWR_FLAG2_SB (0x0AU)
#endif /* defined (DUAL_CORE) */
#define PWR_FLAG_PVDO (0x0BU)
#define PWR_FLAG_AVDO (0x0CU)
#define PWR_FLAG_ACTVOSRDY (0x0DU)
#define PWR_FLAG_ACTVOS (0x0EU)
#define PWR_FLAG_BRR (0x0FU)
#define PWR_FLAG_VOSRDY (0x10U)
#if defined (SMPS)
#define PWR_FLAG_SMPSEXTRDY (0x11U)
#else
#define PWR_FLAG_SCUEN (0x11U)
#endif /* defined (SMPS) */
#if defined (PWR_CSR1_MMCVDO)
#define PWR_FLAG_MMCVDO (0x12U)
#endif /* defined (PWR_CSR1_MMCVDO) */
#define PWR_FLAG_USB33RDY (0x13U)
#define PWR_FLAG_TEMPH (0x14U)
#define PWR_FLAG_TEMPL (0x15U)
#define PWR_FLAG_VBATH (0x16U)
#define PWR_FLAG_VBATL (0x17U)
/* PWR Wake up flag */
#define PWR_FLAG_WKUP1 PWR_WKUPCR_WKUPC1
#define PWR_FLAG_WKUP2 PWR_WKUPCR_WKUPC2
#define PWR_FLAG_WKUP3 PWR_WKUPCR_WKUPC3
#define PWR_FLAG_WKUP4 PWR_WKUPCR_WKUPC4
#define PWR_FLAG_WKUP5 PWR_WKUPCR_WKUPC5
#define PWR_FLAG_WKUP6 PWR_WKUPCR_WKUPC6
/**
* @}
*/
/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask
* @{
*/
#define PWR_EWUP_MASK (0x0FFF3F3FU)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Macro PWR Exported Macro
* @{
*/
/** @brief Configure the main internal regulator output voltage.
* @param __REGULATOR__ : Specifies the regulator output voltage to achieve a
* trade-off between performance and power consumption
* when the device does not operate at the maximum
* frequency (refer to the datasheet for more details).
* This parameter can be one of the following values:
* @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output
* Scale 0 mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output
* Scale 1 mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output
* Scale 2 mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output
* Scale 3 mode.
* @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is
* only possible when Vcore is supplied from LDO (Low DropOut). The
* SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE()
* macro before configuring Voltage Scale 0 using
* __HAL_PWR_VOLTAGESCALING_CONFIG().
* Transition to Voltage Scale 0 is only possible when the system is
* already in Voltage Scale 1.
* Transition from Voltage Scale 0 is only possible to Voltage Scale 1
* then once in Voltage Scale 1 it is possible to switch to another
* voltage scale.
* After each regulator voltage setting, wait on VOSRDY flag to be set
* using macro __HAL_PWR_GET_FLAG().
* To enter low power mode , and if current regulator voltage is
* Voltage Scale 0 then first switch to Voltage Scale 1 before entering
* low power mode.
* @retval None.
*/
#if defined (PWR_SRDCR_VOS) /* STM32H7Axxx and STM32H7Bxxx lines */
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \
do { \
__IO uint32_t tmpreg = 0x00; \
/* Configure the Voltage Scaling */ \
MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, (__REGULATOR__)); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS); \
UNUSED(tmpreg); \
} while(0)
#else /* 3 power domains devices */
#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \
do { \
__IO uint32_t tmpreg = 0x00; \
/* Check the voltage scaling to be configured */ \
if((__REGULATOR__) == PWR_REGULATOR_VOLTAGE_SCALE0) \
{ \
/* Configure the Voltage Scaling 1 */ \
MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \
/* Enable the PWR overdrive */ \
SET_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
/* Delay after setting the syscfg boost setting */ \
tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
} \
else \
{ \
/* Disable the PWR overdrive */ \
CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
/* Delay after setting the syscfg boost setting */ \
tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
/* Configure the Voltage Scaling x */ \
MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \
} \
UNUSED(tmpreg); \
} while(0)
#else /* STM32H72xxx and STM32H73xxx lines */
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \
do { \
__IO uint32_t tmpreg = 0x00; \
/* Configure the Voltage Scaling */ \
MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \
UNUSED(tmpreg); \
} while(0)
#endif /* defined(SYSCFG_PWRCR_ODEN) */
#endif /* defined (PWR_SRDCR_VOS) */
/** @brief Check PWR flags are set or not.
* @param __FLAG__ : Specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_PVDO : PVD Output. This flag is valid only if PVD
* is enabled by the HAL_PWR_EnablePVD()
* function.
* The PVD is stopped by STANDBY mode. For this
* reason, this bit is equal to 0 after STANDBY
* or reset until the PVDE bit is set.
* @arg PWR_FLAG_AVDO : AVD Output. This flag is valid only if AVD
* is enabled by the HAL_PWREx_EnableAVD()
* function. The AVD is stopped by STANDBY mode.
* For this reason, this bit is equal to 0
* after STANDBY or reset until the AVDE bit
* is set.
* @arg PWR_FLAG_ACTVOSRDY : This flag indicates that the Regulator
* voltage scaling output selection is
* ready.
* @arg PWR_FLAG_BRR : Backup regulator ready flag. This bit is not
* reset when the device wakes up from STANDBY
* mode or by a system reset or power-on reset.
* @arg PWR_FLAG_VOSRDY : This flag indicates that the Regulator
* voltage scaling output selection is ready.
* mode or by a system reset or power-on reset.
* @arg PWR_FLAG_USB33RDY : This flag indicates that the USB supply
* from regulator is ready.
* @arg PWR_FLAG_TEMPH : This flag indicates that the temperature
* equal or above high threshold level.
* @arg PWR_FLAG_TEMPL : This flag indicates that the temperature
* equal or below low threshold level.
* @arg PWR_FLAG_VBATH : This flag indicates that VBAT level equal
* or above high threshold level.
* @arg PWR_FLAG_VBATL : This flag indicates that VBAT level equal
* or below low threshold level.
* @arg PWR_FLAG_STOP : This flag indicates that the system entered
* in STOP mode.
* @arg PWR_FLAG_SB : This flag indicates that the system entered in
* STANDBY mode.
* @arg PWR_FLAG_SB_D1 : This flag indicates that the D1 domain
* entered in STANDBY mode.
* @arg PWR_FLAG_SB_D2 : This flag indicates that the D2 domain
* entered in STANDBY mode.
* @arg PWR_FLAG2_STOP : This flag indicates that the system entered
* in STOP mode.
* @arg PWR_FLAG2_SB : This flag indicates that the system entered
* in STANDBY mode.
* @arg PWR_FLAG2_SB_D1 : This flag indicates that the D1 domain
* entered in STANDBY mode.
* @arg PWR_FLAG2_SB_D2 : This flag indicates that the D2 domain
* entered in STANDBY mode.
* @arg PWR_FLAG_CPU_HOLD : This flag indicates that the CPU1 wakes
* up with hold.
* @arg PWR_FLAG_CPU2_HOLD : This flag indicates that the CPU2 wakes
* up with hold.
* @arg PWR_FLAG_SMPSEXTRDY : This flag indicates that the SMPS
* External supply is sready.
* @arg PWR_FLAG_SCUEN : This flag indicates that the supply
* configuration update is enabled.
* @arg PWR_FLAG_MMCVDO : This flag indicates that the VDDMMC is
* above or equal to 1.2 V.
* @note The PWR_FLAG_PVDO, PWR_FLAG_AVDO, PWR_FLAG_ACTVOSRDY, PWR_FLAG_BRR,
* PWR_FLAG_VOSRDY, PWR_FLAG_USB33RDY, PWR_FLAG_TEMPH, PWR_FLAG_TEMPL,
* PWR_FLAG_VBATH, PWR_FLAG_VBATL, PWR_FLAG_STOP and PWR_FLAG_SB flags
* are used for all H7 family lines.
* The PWR_FLAG2_STOP, PWR_FLAG2_SB, PWR_FLAG2_SB_D1, PWR_FLAG2_SB_D2,
* PWR_FLAG_CPU_HOLD and PWR_FLAG_CPU2_HOLD flags are used only for H7
* dual core lines.
* The PWR_FLAG_SB_D1 and PWR_FLAG_SB_D2 flags are used for all H7
* family except STM32H7Axxx and STM32H7Bxxx lines.
* The PWR_FLAG_MMCVDO flag is used only for STM32H7Axxx and
* STM32H7Bxxx lines.
* The PWR_FLAG_SCUEN flag is used for devices that support only LDO
* regulator.
* The PWR_FLAG_SMPSEXTRDY flag is used for devices that support LDO
* and SMPS regulators.
* @retval The (__FLAG__) state (TRUE or FALSE).
*/
#if defined (DUAL_CORE) /* Dual core lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_CPU_HOLD) ? ((PWR->CPU2CR & PWR_CPU2CR_HOLD1F) == PWR_CPU2CR_HOLD1F) :\
((__FLAG__) == PWR_FLAG_CPU2_HOLD) ? ((PWR->CPUCR & PWR_CPUCR_HOLD2F) == PWR_CPUCR_HOLD2F) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG2_SB) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF) == PWR_CPU2CR_SBF) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG2_STOP) ? ((PWR->CPU2CR & PWR_CPU2CR_STOPF) == PWR_CPU2CR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\
((__FLAG__) == PWR_FLAG2_SB_D1) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D1) == PWR_CPU2CR_SBF_D1) :\
((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\
((__FLAG__) == PWR_FLAG2_SB_D2) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D2) == PWR_CPU2CR_SBF_D2) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#else /* Single core lines */
#if defined (PWR_CPUCR_SBF_D2) /* STM32H72x, STM32H73x, STM32H74x and STM32H75x lines */
#if defined (SMPS) /* STM32H725 and STM32H735 lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_FLAG_SMPSEXTRDY) == PWR_FLAG_SMPSEXTRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\
((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#else /* STM32H723, STM32H733, STM32H742, STM32H743, STM32H750 and STM32H753 lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\
((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#endif /* defined (SMPS) */
#else /* STM32H7Axxx and STM32H7Bxxx lines */
#if defined (SMPS) /* STM32H7AxxQ and STM32H7BxxQ lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\
((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#else /* STM32H7Axx and STM32H7Bxx lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#endif /* SMPS */
#endif /* PWR_CPUCR_SBF_D2 */
#endif /* DUAL_CORE */
/** @brief Check PWR wake up flags are set or not.
* @param __FLAG__: specifies the wake up flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag.
* @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag.
* @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag.
* @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag.
* @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag.
* @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag.
* @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices
* that support GPIOI port.
* @retval The (__FLAG__) state (TRUE or FALSE).
*/
#define __HAL_PWR_GET_WAKEUPFLAG(__FLAG__) ((PWR->WKUPFR & (__FLAG__)) ? 0 : 1)
#if defined (DUAL_CORE)
/** @brief Clear CPU PWR flags.
* @param __FLAG__ : Specifies the flag to clear.
* @note This parameter is not used for the STM32H7 family and is kept as
* parameter just to maintain compatibility with other families.
* @note This macro clear all CPU flags STOPF, SBF, SBF_D1, and SBF_D2.
* This parameter can be one of the following values :
* @arg PWR_CPU_FLAGS : Clear HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2
* CPU flags.
* @retval None.
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) \
do { \
SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); \
SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); \
} while(0)
#else
/** @brief Clear CPU PWR flags.
* @param __FLAG__ : Specifies the flag to clear.
* @note This parameter is not used for the STM32H7 family and is kept as
* parameter just to maintain compatibility with other families.
* @note This macro clear all CPU flags.
* For single core devices except STM32H7Axxx and STM32H7Bxxx, CPU
* flags are STOPF, SBF, SBF_D1 and SBF_D2.
* For STM32H7Axxx and STM32H7Bxxx lines, CPU flags are STOPF and SBF.
* @retval None.
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF)
#endif /* defined (DUAL_CORE) */
/** @brief Clear PWR wake up flags.
* @param __FLAG__ : Specifies the wake up flag to be cleared.
* This parameter can be one of the following values :
* @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag.
* @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag.
* @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag.
* @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag.
* @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag.
* @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag.
* @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices
* that support GPIOI port.
* @retval None.
*/
#define __HAL_PWR_CLEAR_WAKEUPFLAG(__FLAG__) SET_BIT(PWR->WKUPCR, (__FLAG__))
/**
* @brief Enable the PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Enable the PVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable the PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Disable the PVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable event on PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Enable event on PVD EXTI D2 Line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable event on PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Disable event on PVD EXTI D2 Line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable the PVD Rising Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Rising Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Rising & Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Disable the PVD Rising & Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Check whether the specified PVD EXTI interrupt flag is set or not.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL)
#if defined (DUAL_CORE)
/**
* @brief Checks whether the specified PVD EXTI interrupt flag is set or not.
* @retval EXTI D2 PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL)
#endif /* defined (DUAL_CORE) */
/**
* @brief Clear the PVD EXTI flag.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Clear the PVD EXTI D2 flag.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Generates a Software interrupt on PVD EXTI line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD)
/**
* @}
*/
/* Include PWR HAL Extension module */
#include "stm32h7xx_hal_pwr_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_PWR_DeInit (void);
void HAL_PWR_EnableBkUpAccess (void);
void HAL_PWR_DisableBkUpAccess (void);
/**
* @}
*/
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control Functions
* @{
*/
/* Peripheral Control functions **********************************************/
/* PVD configuration */
void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD);
void HAL_PWR_EnablePVD (void);
void HAL_PWR_DisablePVD (void);
/* WakeUp pins configuration */
void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity);
void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx);
/* Low Power modes entry */
void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry);
void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry);
void HAL_PWR_EnterSTANDBYMode (void);
/* Power PVD IRQ Handler */
void HAL_PWR_PVD_IRQHandler (void);
void HAL_PWR_PVDCallback (void);
/* Cortex System Control functions *******************************************/
void HAL_PWR_EnableSleepOnExit (void);
void HAL_PWR_DisableSleepOnExit (void);
void HAL_PWR_EnableSEVOnPend (void);
void HAL_PWR_DisableSEVOnPend (void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup PWR_Private_Constants PWR Private Constants
* @{
*/
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
* @{
*/
#define PWR_EXTI_LINE_PVD EXTI_IMR1_IM16 /*!< External interrupt line 16
Connected to the PVD EXTI Line */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWR_Private_Macros PWR Private Macros
* @{
*/
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
* @{
*/
/* Check PVD level parameter */
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) ||\
((LEVEL) == PWR_PVDLEVEL_1) ||\
((LEVEL) == PWR_PVDLEVEL_2) ||\
((LEVEL) == PWR_PVDLEVEL_3) ||\
((LEVEL) == PWR_PVDLEVEL_4) ||\
((LEVEL) == PWR_PVDLEVEL_5) ||\
((LEVEL) == PWR_PVDLEVEL_6) ||\
((LEVEL) == PWR_PVDLEVEL_7))
/* Check PVD mode parameter */
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING) ||\
((MODE) == PWR_PVD_MODE_IT_FALLING) ||\
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\
((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\
((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\
((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) ||\
((MODE) == PWR_PVD_MODE_NORMAL))
/* Check low power regulator parameter */
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) ||\
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
/* Check low power mode entry parameter */
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) ||\
((ENTRY) == PWR_SLEEPENTRY_WFE))
/* Check low power mode entry parameter */
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) ||\
((ENTRY) == PWR_STOPENTRY_WFE))
/* Check voltage scale level parameter */
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE0) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* STM32H7xx_HAL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

791
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h Normal file
View File

@@ -0,0 +1,791 @@
/**
******************************************************************************
* @file stm32h7xx_hal_pwr_ex.h
* @author MCD Application Team
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_PWR_EX_H
#define STM32H7xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup PWREx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Types PWREx Exported Types
* @{
*/
/**
* @brief PWREx AVD configuration structure definition
*/
typedef struct
{
uint32_t AVDLevel; /*!< AVDLevel : Specifies the AVD detection level. This
parameter can be a value of @ref
PWREx_AVD_detection_level
*/
uint32_t Mode; /*!< Mode : Specifies the EXTI operating mode for the AVD
event. This parameter can be a value of @ref
PWREx_AVD_Mode.
*/
}PWREx_AVDTypeDef;
/**
* @brief PWREx Wakeup pin configuration structure definition
*/
typedef struct
{
uint32_t WakeUpPin; /*!< WakeUpPin: Specifies the Wake-Up pin to be enabled.
This parameter can be a value of @ref
PWREx_WakeUp_Pins
*/
uint32_t PinPolarity; /*!< PinPolarity: Specifies the Wake-Up pin polarity.
This parameter can be a value of @ref
PWREx_PIN_Polarity
*/
uint32_t PinPull; /*!< PinPull: Specifies the Wake-Up pin pull. This
parameter can be a value of @ref
PWREx_PIN_Pull
*/
}PWREx_WakeupPinTypeDef;
#if defined (PWR_CSR1_MMCVDO)
/**
* @brief PWR VDDMMC voltage level enum definition
*/
typedef enum
{
PWR_MMC_VOLTAGE_BELOW_1V2, /*!< VDDMMC is below 1V2 */
PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2 /*!< VDDMMC is above or equal 1V2 */
} PWREx_MMC_VoltageLevel;
#endif /* defined (PWR_CSR1_MMCVDO) */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
* @{
*/
/** @defgroup PWREx_WakeUp_Pins PWREx Wake-Up Pins
* @{
*/
/* High level and No pull (default configuration) */
#define PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6
#if defined (PWR_WKUPEPR_WKUPEN5)
#define PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5
#endif /* defined (PWR_WKUPEPR_WKUPEN5) */
#define PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4
#if defined (PWR_WKUPEPR_WKUPEN3)
#define PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
#define PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2
#define PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1
/* High level and No pull */
#define PWR_WAKEUP_PIN6_HIGH PWR_WKUPEPR_WKUPEN6
#if defined (PWR_WKUPEPR_WKUPEN5)
#define PWR_WAKEUP_PIN5_HIGH PWR_WKUPEPR_WKUPEN5
#endif /* defined (PWR_WKUPEPR_WKUPEN5) */
#define PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4
#if defined (PWR_WKUPEPR_WKUPEN3)
#define PWR_WAKEUP_PIN3_HIGH PWR_WKUPEPR_WKUPEN3
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
#define PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2
#define PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1
/* Low level and No pull */
#define PWR_WAKEUP_PIN6_LOW (PWR_WKUPEPR_WKUPP6 | PWR_WKUPEPR_WKUPEN6)
#if defined (PWR_WKUPEPR_WKUPP5)
#define PWR_WAKEUP_PIN5_LOW (PWR_WKUPEPR_WKUPP5 | PWR_WKUPEPR_WKUPEN5)
#endif /* defined (PWR_WKUPEPR_WKUPP5) */
#define PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 | PWR_WKUPEPR_WKUPEN4)
#if defined (PWR_WKUPEPR_WKUPP3)
#define PWR_WAKEUP_PIN3_LOW (PWR_WKUPEPR_WKUPP3 | PWR_WKUPEPR_WKUPEN3)
#endif /* defined (PWR_WKUPEPR_WKUPP3) */
#define PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 | PWR_WKUPEPR_WKUPEN2)
#define PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 | PWR_WKUPEPR_WKUPEN1)
/**
* @}
*/
/** @defgroup PWREx_PIN_Polarity PWREx Pin Polarity configuration
* @{
*/
#define PWR_PIN_POLARITY_HIGH (0x00000000U)
#define PWR_PIN_POLARITY_LOW (0x00000001U)
/**
* @}
*/
/** @defgroup PWREx_PIN_Pull PWREx Pin Pull configuration
* @{
*/
#define PWR_PIN_NO_PULL (0x00000000U)
#define PWR_PIN_PULL_UP (0x00000001U)
#define PWR_PIN_PULL_DOWN (0x00000002U)
/**
* @}
*/
/** @defgroup PWREx_Wakeup_Pins_Flags PWREx Wakeup Pins Flags.
* @{
*/
#define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */
#define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */
#if defined (PWR_WKUPFR_WKUPF3)
#define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */
#endif /* defined (PWR_WKUPFR_WKUPF3) */
#define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */
#if defined (PWR_WKUPFR_WKUPF5)
#define PWR_WAKEUP_FLAG5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */
#endif /* defined (PWR_WKUPFR_WKUPF5) */
#define PWR_WAKEUP_FLAG6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */
#if defined (PWR_WKUPFR_WKUPF3)
#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\
PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4 |\
PWR_WKUPFR_WKUPF5 | PWR_WKUPFR_WKUPF6)
#else
#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\
PWR_WKUPFR_WKUPF4 | PWR_WKUPFR_WKUPF6)
#endif /* defined (PWR_WKUPFR_WKUPF3) */
/**
* @}
*/
#if defined (DUAL_CORE)
/** @defgroup PWREx_Core_Select PWREx Core definition
* @{
*/
#define PWR_CORE_CPU1 (0x00000000U)
#define PWR_CORE_CPU2 (0x00000001U)
/**
* @}
*/
#endif /* defined (DUAL_CORE) */
/** @defgroup PWREx_Domains PWREx Domains definition
* @{
*/
#define PWR_D1_DOMAIN (0x00000000U)
#if defined (PWR_CPUCR_PDDS_D2)
#define PWR_D2_DOMAIN (0x00000001U)
#endif /* defined (PWR_CPUCR_PDDS_D2) */
#define PWR_D3_DOMAIN (0x00000002U)
/**
* @}
*/
/** @defgroup PWREx_Domain_Flags PWREx Domain Flags definition
* @{
*/
#if defined (DUAL_CORE)
#define PWR_D1_DOMAIN_FLAGS (0x00000000U)
#define PWR_D2_DOMAIN_FLAGS (0x00000001U)
#define PWR_ALL_DOMAIN_FLAGS (0x00000002U)
#else
#define PWR_CPU_FLAGS (0x00000000U)
#endif /* defined (DUAL_CORE) */
/**
* @}
*/
/** @defgroup PWREx_D3_State PWREx D3 Domain State
* @{
*/
#define PWR_D3_DOMAIN_STOP (0x00000000U)
#define PWR_D3_DOMAIN_RUN (0x00000800U)
/**
* @}
*/
/** @defgroup PWREx_Supply_configuration PWREx Supply configuration
* @{
*/
#define PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are suppplied from the LDO */
#if defined (SMPS)
#define PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are suppplied from the SMPS only */
#define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */
#define PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */
#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are suppplied from the LDO */
#define PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are suppplied from the LDO */
#define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */
#define PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */
#endif /* defined (SMPS) */
#define PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS /*!< The SMPS disabled and the LDO Bypass. The Core domains are supplied from an external source */
#if defined (SMPS)
#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | \
PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)
#else
#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)
#endif /* defined (SMPS) */
/**
* @}
*/
/** @defgroup PWREx_AVD_detection_level PWREx AVD detection level
* @{
*/
#define PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0 /*!< Analog voltage detector level 0
selection : 1V7 */
#define PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1 /*!< Analog voltage detector level 1
selection : 2V1 */
#define PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2 /*!< Analog voltage detector level 2
selection : 2V5 */
#define PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3 /*!< Analog voltage detector level 3
selection : 2V8 */
/**
* @}
*/
/** @defgroup PWREx_AVD_Mode PWREx AVD Mode
* @{
*/
#define PWR_AVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
#define PWR_AVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
#define PWR_AVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
#define PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_AVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
#define PWR_AVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
#define PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
* @{
*/
#define PWR_REGULATOR_SVOS_SCALE5 (PWR_CR1_SVOS_0)
#define PWR_REGULATOR_SVOS_SCALE4 (PWR_CR1_SVOS_1)
#define PWR_REGULATOR_SVOS_SCALE3 (PWR_CR1_SVOS_0 | PWR_CR1_SVOS_1)
/**
* @}
*/
/** @defgroup PWREx_VBAT_Battery_Charging_Resistor PWR battery charging resistor selection
* @{
*/
#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000U) /*!< VBAT charging through a 5 kOhms resistor */
#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR3_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */
/**
* @}
*/
/** @defgroup PWREx_VBAT_Thresholds PWREx VBAT Thresholds
* @{
*/
#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
#define PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CR2_VBATL
#define PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CR2_VBATH
/**
* @}
*/
/** @defgroup PWREx_TEMP_Thresholds PWREx Temperature Thresholds
* @{
*/
#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
#define PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CR2_TEMPL
#define PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CR2_TEMPH
/**
* @}
*/
/** @defgroup PWREx_AVD_EXTI_Line PWREx AVD EXTI Line 16
* @{
*/
#define PWR_EXTI_LINE_AVD EXTI_IMR1_IM16 /*!< External interrupt line 16
Connected to the AVD EXTI Line */
/**
* @}
*/
#if defined (PWR_CR1_SRDRAMSO)
/** @defgroup PWREx_Memory_Shut_Off Memory shut-off block selection
* @{
*/
#define PWR_SRD_AHB_MEMORY_BLOCK PWR_CR1_SRDRAMSO /*!< SmartRun domain AHB memory shut-off in DStop/DStop2 low-power mode */
#define PWR_USB_FDCAN_MEMORY_BLOCK PWR_CR1_HSITFSO /*!< High-speed interfaces USB and FDCAN memories shut-off in DStop/DStop2 mode */
#define PWR_GFXMMU_JPEG_MEMORY_BLOCK PWR_CR1_GFXSO /*!< GFXMMU and JPEG memories shut-off in DStop/DStop2 mode */
#define PWR_TCM_ECM_MEMORY_BLOCK PWR_CR1_ITCMSO /*!< Instruction TCM and ETM memories shut-off in DStop/DStop2 mode */
#define PWR_RAM1_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM1SO /*!< AHB RAM1 shut-off in DStop/DStop2 mode */
#define PWR_RAM2_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM2SO /*!< AHB RAM2 shut-off in DStop/DStop2 mode */
#define PWR_RAM1_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM1SO /*!< AXI RAM1 shut-off in DStop/DStop2 mode */
#define PWR_RAM2_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM2SO /*!< AXI RAM2 shut-off in DStop/DStop2 mode */
#define PWR_RAM3_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM3SO /*!< AXI RAM3 shut-off in DStop/DStop2 mode */
#define PWR_MEMORY_BLOCK_KEEP_ON 0U /*!< Memory content is kept in DStop or DStop2 mode */
#define PWR_MEMORY_BLOCK_SHUT_OFF 1U /*!< Memory content is lost in DStop or DStop2 mode */
/**
* @}
*/
#endif /* defined (PWR_CR1_SRDRAMSO) */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
* @{
*/
/**
* @brief Enable the AVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Enable the AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable the AVD EXTI Line 16
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Disable the AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable event on AVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Enable event on AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable event on AVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Disable event on AVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable the AVD Extended Interrupt Rising Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Disable the AVD Extended Interrupt Rising Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Enable the AVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Disable the AVD Extended Interrupt Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD)
/**
* @brief Enable the AVD Extended Interrupt Rising and Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Disable the AVD Extended Interrupt Rising & Falling Trigger.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Check whether the specified AVD EXTI interrupt flag is set or not.
* @retval EXTI AVD Line Status.
*/
#define __HAL_PWR_AVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL)
#if defined (DUAL_CORE)
/**
* @brief Check whether the specified AVD EXTI D2 interrupt flag is set or not.
* @retval EXTI D2 AVD Line Status.
*/
#define __HAL_PWR_AVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL)
#endif /* defined (DUAL_CORE) */
/**
* @brief Clear the AVD EXTI flag.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD)
#if defined (DUAL_CORE)
/**
* @brief Clear the AVD EXTI D2 flag.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Generates a Software interrupt on AVD EXTI line.
* @retval None.
*/
#define __HAL_PWR_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_AVD)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
* @{
*/
/** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions
* @{
*/
HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource);
uint32_t HAL_PWREx_GetSupplyConfig (void);
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling);
uint32_t HAL_PWREx_GetVoltageRange (void);
HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling);
uint32_t HAL_PWREx_GetStopModeVoltageRange (void);
/**
* @}
*/
/** @addtogroup PWREx_Exported_Functions_Group2 Low Power Control Functions
* @{
*/
/* System low power control functions */
#if defined (PWR_CPUCR_RETDS_CD)
void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry);
#endif /* defined (PWR_CPUCR_RETDS_CD) */
void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain);
void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain);
void HAL_PWREx_ConfigD3Domain (uint32_t D3State);
/* Clear Cortex-Mx pending flag */
void HAL_PWREx_ClearPendingEvent (void);
#if defined (DUAL_CORE)
/* Clear domain flags */
void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags);
/* Core Hold/Release functions */
HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU);
void HAL_PWREx_ReleaseCore (uint32_t CPU);
#endif /* defined (DUAL_CORE) */
/* Flash low power control functions */
void HAL_PWREx_EnableFlashPowerDown (void);
void HAL_PWREx_DisableFlashPowerDown (void);
#if defined (PWR_CR1_SRDRAMSO)
/* Memory shut-off functions */
void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock);
void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock);
#endif /* defined(PWR_CR1_SRDRAMSO) */
/* Wakeup Pins control functions */
void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams);
void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin);
uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag);
HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag);
/* Power Wakeup PIN IRQ Handler */
void HAL_PWREx_WAKEUP_PIN_IRQHandler (void);
void HAL_PWREx_WKUP1_Callback (void);
void HAL_PWREx_WKUP2_Callback (void);
#if defined (PWR_WKUPEPR_WKUPEN3)
void HAL_PWREx_WKUP3_Callback (void);
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
void HAL_PWREx_WKUP4_Callback (void);
#if defined (PWR_WKUPEPR_WKUPEN5)
void HAL_PWREx_WKUP5_Callback (void);
#endif /* defined (PWR_WKUPEPR_WKUPEN5) */
void HAL_PWREx_WKUP6_Callback (void);
/**
* @}
*/
/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals control functions
* @{
*/
/* Backup regulator control functions */
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void);
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void);
/* USB regulator control functions */
HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void);
HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void);
void HAL_PWREx_EnableUSBVoltageDetector (void);
void HAL_PWREx_DisableUSBVoltageDetector (void);
/* Battery control functions */
void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue);
void HAL_PWREx_DisableBatteryCharging (void);
#if defined (PWR_CR1_BOOSTE)
/* Analog Booster functions */
void HAL_PWREx_EnableAnalogBooster (void);
void HAL_PWREx_DisableAnalogBooster (void);
#endif /* PWR_CR1_BOOSTE */
/**
* @}
*/
/** @addtogroup PWREx_Exported_Functions_Group4 Power Monitoring functions
* @{
*/
/* Power VBAT/Temperature monitoring functions */
void HAL_PWREx_EnableMonitoring (void);
void HAL_PWREx_DisableMonitoring (void);
uint32_t HAL_PWREx_GetTemperatureLevel (void);
uint32_t HAL_PWREx_GetVBATLevel (void);
#if defined (PWR_CSR1_MMCVDO)
PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void);
#endif /* PWR_CSR1_MMCVDO */
/* Power AVD configuration functions */
void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD);
void HAL_PWREx_EnableAVD (void);
void HAL_PWREx_DisableAVD (void);
/* Power PVD/AVD IRQ Handler */
void HAL_PWREx_PVD_AVD_IRQHandler (void);
void HAL_PWREx_AVDCallback (void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWREx_Private_Macros PWREx Private Macros
* @{
*/
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
* @{
*/
/* Check PWR regulator configuration parameter */
#if defined (SMPS)
#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\
((PWR_SOURCE) == PWR_DIRECT_SMPS_SUPPLY) ||\
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) ||\
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT) ||\
((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT) ||\
((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY))
#else
#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\
((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY))
#endif /* defined (SMPS) */
/* Check PWR regulator configuration in STOP mode parameter */
#define IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE3) ||\
((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE4) ||\
((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE5))
/* Check PWR domain parameter */
#if defined (PWR_CPUCR_PDDS_D2)
#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\
((DOMAIN) == PWR_D2_DOMAIN) ||\
((DOMAIN) == PWR_D3_DOMAIN))
#else
#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\
((DOMAIN) == PWR_D3_DOMAIN))
#endif /* defined (PWR_CPUCR_PDDS_D2) */
/* Check D3/SRD domain state parameter */
#define IS_D3_STATE(STATE) (((STATE) == PWR_D3_DOMAIN_STOP) ||\
((STATE) == PWR_D3_DOMAIN_RUN))
/* Check wake up pin parameter */
#if defined (PWR_WKUPEPR_WKUPEN3)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\
((PIN) == PWR_WAKEUP_PIN2) ||\
((PIN) == PWR_WAKEUP_PIN3) ||\
((PIN) == PWR_WAKEUP_PIN4) ||\
((PIN) == PWR_WAKEUP_PIN5) ||\
((PIN) == PWR_WAKEUP_PIN6) ||\
((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN3_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN5_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN1_LOW) ||\
((PIN) == PWR_WAKEUP_PIN2_LOW) ||\
((PIN) == PWR_WAKEUP_PIN3_LOW) ||\
((PIN) == PWR_WAKEUP_PIN4_LOW) ||\
((PIN) == PWR_WAKEUP_PIN5_LOW) ||\
((PIN) == PWR_WAKEUP_PIN6_LOW))
#else
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\
((PIN) == PWR_WAKEUP_PIN2) ||\
((PIN) == PWR_WAKEUP_PIN4) ||\
((PIN) == PWR_WAKEUP_PIN6) ||\
((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\
((PIN) == PWR_WAKEUP_PIN1_LOW) ||\
((PIN) == PWR_WAKEUP_PIN2_LOW) ||\
((PIN) == PWR_WAKEUP_PIN4_LOW) ||\
((PIN) == PWR_WAKEUP_PIN6_LOW))
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
/* Check wake up pin polarity parameter */
#define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\
((POLARITY) == PWR_PIN_POLARITY_LOW))
/* Check wake up pin pull configuration parameter */
#define IS_PWR_WAKEUP_PIN_PULL(PULL) (((PULL) == PWR_PIN_NO_PULL) ||\
((PULL) == PWR_PIN_PULL_UP) ||\
((PULL) == PWR_PIN_PULL_DOWN))
/* Check wake up flag parameter */
#if defined (PWR_WKUPEPR_WKUPEN3)
#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\
((FLAG) == PWR_WAKEUP_FLAG2) ||\
((FLAG) == PWR_WAKEUP_FLAG3) ||\
((FLAG) == PWR_WAKEUP_FLAG4) ||\
((FLAG) == PWR_WAKEUP_FLAG5) ||\
((FLAG) == PWR_WAKEUP_FLAG6) ||\
((FLAG) == PWR_WAKEUP_FLAG_ALL))
#else
#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\
((FLAG) == PWR_WAKEUP_FLAG2) ||\
((FLAG) == PWR_WAKEUP_FLAG4) ||\
((FLAG) == PWR_WAKEUP_FLAG6) ||\
((FLAG) == PWR_WAKEUP_FLAG_ALL))
#endif /* defined (PWR_WKUPEPR_WKUPEN3) */
/* Check wake up flag parameter */
#define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_0) ||\
((LEVEL) == PWR_AVDLEVEL_1) ||\
((LEVEL) == PWR_AVDLEVEL_2) ||\
((LEVEL) == PWR_AVDLEVEL_3))
/* Check AVD mode parameter */
#define IS_PWR_AVD_MODE(MODE) (((MODE) == PWR_AVD_MODE_IT_RISING) ||\
((MODE) == PWR_AVD_MODE_IT_FALLING) ||\
((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) ||\
((MODE) == PWR_AVD_MODE_EVENT_RISING) ||\
((MODE) == PWR_AVD_MODE_EVENT_FALLING) ||\
((MODE) == PWR_AVD_MODE_NORMAL) ||\
((MODE) == PWR_AVD_MODE_EVENT_RISING_FALLING))
/* Check resistor battery parameter */
#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\
((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
/* Check D1/CD CPU ID parameter */
#define IS_PWR_D1_CPU(CPU) ((CPU) == CM7_CPUID)
#if defined (DUAL_CORE)
/* Check CPU parameter */
#define IS_PWR_CORE(CPU) (((CPU) == PWR_CORE_CPU1) || ((CPU) == PWR_CORE_CPU2))
/* Check D2 CPU ID parameter */
#define IS_PWR_D2_CPU(CPU) ((CPU) == CM4_CPUID)
/* Check PWR domain flag parameter */
#define IS_PWR_DOMAIN_FLAG(FLAG) (((FLAG) == PWR_D1_DOMAIN_FLAGS) || \
((FLAG) == PWR_D2_DOMAIN_FLAGS) || \
((FLAG) == PWR_ALL_DOMAIN_FLAGS))
#endif /* defined (DUAL_CORE) */
#if defined (PWR_CR1_SRDRAMSO)
/* Check memory block parameter */
#define IS_PWR_MEMORY_BLOCK(BLOCK) (((BLOCK) == PWR_SRD_AHB_MEMORY_BLOCK) || \
((BLOCK) == PWR_USB_FDCAN_MEMORY_BLOCK) || \
((BLOCK) == PWR_GFXMMU_JPEG_MEMORY_BLOCK) || \
((BLOCK) == PWR_TCM_ECM_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM1_AHB_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM2_AHB_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM1_AXI_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM2_AXI_MEMORY_BLOCK) || \
((BLOCK) == PWR_RAM3_AXI_MEMORY_BLOCK))
#endif /* defined (PWR_CR1_SRDRAMSO) */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* STM32H7xx_HAL_PWR_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

8255
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h Normal file
View File

File diff suppressed because it is too large Load Diff

4476
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h Normal file
View File

File diff suppressed because it is too large Load Diff

2380
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h Normal file
View File

File diff suppressed because it is too large Load Diff

530
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h Normal file
View File

@@ -0,0 +1,530 @@
/**
******************************************************************************
* @file stm32h7xx_hal_tim_ex.h
* @author MCD Application Team
* @brief Header file of TIM HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_TIM_EX_H
#define STM32H7xx_HAL_TIM_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup TIMEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
* @{
*/
/**
* @brief TIM Hall sensor Configuration Structure definition
*/
typedef struct
{
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint32_t IC1Filter; /*!< Specifies the input capture filter.
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
} TIM_HallSensor_InitTypeDef;
#if defined(TIM_BREAK_INPUT_SUPPORT)
/**
* @brief TIM Break/Break2 input configuration
*/
typedef struct
{
uint32_t Source; /*!< Specifies the source of the timer break input.
This parameter can be a value of @ref TIMEx_Break_Input_Source */
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
uint32_t Polarity; /*!< Specifies the break input source polarity.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
Not relevant when analog watchdog output of the DFSDM1 used as break input source */
}
TIMEx_BreakInputConfigTypeDef;
#endif /* TIM_BREAK_INPUT_SUPPORT */
/**
* @}
*/
/* End of exported types -----------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
* @{
*/
/** @defgroup TIMEx_Remap TIM Extended Remapping
* @{
*/
#define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */
#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 OUT */
#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 OUT */
#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */
#define TIM_TIM1_ETR_ADC1_AWD2 (TIM1_AF1_ETRSEL_2) /* !< TIM1_ETR is connected to ADC1 AWD2 */
#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */
#define TIM_TIM1_ETR_ADC3_AWD1 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to ADC3 AWD1 */
#define TIM_TIM1_ETR_ADC3_AWD2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC3 AWD2 */
#define TIM_TIM1_ETR_ADC3_AWD3 TIM1_AF1_ETRSEL_3 /* !< TIM1_ETR is connected to ADC3 AWD3 */
#define TIM_TIM8_ETR_GPIO 0x00000000U /* !< TIM8_ETR is connected to GPIO */
#define TIM_TIM8_ETR_COMP1 TIM8_AF1_ETRSEL_0 /* !< TIM8_ETR is connected to COMP1 OUT */
#define TIM_TIM8_ETR_COMP2 TIM8_AF1_ETRSEL_1 /* !< TIM8_ETR is connected to COMP2 OUT */
#define TIM_TIM8_ETR_ADC2_AWD1 (TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC2 AWD1 */
#define TIM_TIM8_ETR_ADC2_AWD2 (TIM8_AF1_ETRSEL_2) /* !< TIM8_ETR is connected to ADC2 AWD2 */
#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC2 AWD3 */
#define TIM_TIM8_ETR_ADC3_AWD1 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1) /* !< TIM8_ETR is connected to ADC3 AWD1 */
#define TIM_TIM8_ETR_ADC3_AWD2 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM8_ETR is connected to ADC3 AWD2 */
#define TIM_TIM8_ETR_ADC3_AWD3 TIM8_AF1_ETRSEL_3 /* !< TIM8_ETR is connected to ADC3 AWD3 */
#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */
#define TIM_TIM2_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to COMP1 OUT */
#define TIM_TIM2_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP2 OUT */
#define TIM_TIM2_ETR_RCC_LSE (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to RCC LSE */
#define TIM_TIM2_ETR_SAI1_FSA TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to SAI1 FS_A */
#define TIM_TIM2_ETR_SAI1_FSB (TIM2_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to SAI1 FS_B */
#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */
#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 OUT */
#define TIM_TIM5_ETR_GPIO 0x00000000U /* !< TIM5_ETR is connected to GPIO */
#define TIM_TIM5_ETR_SAI2_FSA TIM5_AF1_ETRSEL_0 /* !< TIM5_ETR is connected to SAI2 FS_A */
#define TIM_TIM5_ETR_SAI2_FSB TIM5_AF1_ETRSEL_1 /* !< TIM5_ETR is connected to SAI2 FS_B */
#define TIM_TIM5_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /* !< TIM5_ETR is connected to SAI4 FS_A */
#define TIM_TIM5_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /* !< TIM5_ETR is connected to SAI4 FS_B */
#define TIM_TIM23_ETR_GPIO 0x00000000U /* !< TIM23_ETR is connected to GPIO */
#define TIM_TIM23_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /* !< TIM23_ETR is connected to COMP1 OUT */
#define TIM_TIM23_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /* !< TIM23_ETR is connected to COMP2 OUT */
#define TIM_TIM24_ETR_GPIO 0x00000000U /* !< TIM24_ETR is connected to GPIO */
#define TIM_TIM24_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /* !< TIM24_ETR is connected to SAI4 FS_A */
#define TIM_TIM24_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /* !< TIM24_ETR is connected to SAI4 FS_B */
#define TIM_TIM24_ETR_SAI1_FSA (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /* !< TIM24_ETR is connected to SAI1 FS_A */
#define TIM_TIM24_ETR_SAI1_FSB TIM2_AF1_ETRSEL_2 /* !< TIM24_ETR is connected to SAI1 FS_B */
/**
* @}
*/
#if defined(TIM_BREAK_INPUT_SUPPORT)
/** @defgroup TIMEx_Break_Input TIM Extended Break input
* @{
*/
#define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */
#define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
* @{
*/
#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */
#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */
#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */
#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
* @{
*/
#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */
#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */
/**
* @}
*/
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
* @{
*/
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */
/**
* @}
*/
#endif /* TIM_BREAK_INPUT_SUPPORT */
/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection
* @{
*/
#define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1_TI1 is connected to GPIO */
#define TIM_TIM1_TI1_COMP1 TIM_TISEL_TI1SEL_0 /* !< TIM1_TI1 is connected to COMP1 OUT */
#define TIM_TIM8_TI1_GPIO 0x00000000U /* !< TIM8_TI1 is connected to GPIO */
#define TIM_TIM8_TI1_COMP2 TIM_TISEL_TI1SEL_0 /* !< TIM8_TI1 is connected to COMP2 OUT */
#define TIM_TIM2_TI4_GPIO 0x00000000U /* !< TIM2_TI4 is connected to GPIO */
#define TIM_TIM2_TI4_COMP1 TIM_TISEL_TI4SEL_0 /* !< TIM2_TI4 is connected to COMP1 OUT */
#define TIM_TIM2_TI4_COMP2 TIM_TISEL_TI4SEL_1 /* !< TIM2_TI4 is connected to COMP2 OUT */
#define TIM_TIM2_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /* !< TIM2_TI4 is connected to COMP2 OUT OR COMP2 OUT */
#define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3_TI1 is connected to GPIO */
#define TIM_TIM3_TI1_COMP1 TIM_TISEL_TI1SEL_0 /* !< TIM3_TI1 is connected to COMP1 OUT */
#define TIM_TIM3_TI1_COMP2 TIM_TISEL_TI1SEL_1 /* !< TIM3_TI1 is connected to COMP2 OUT */
#define TIM_TIM3_TI1_COMP1_COMP2 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM3_TI1 is connected to COMP1 OUT or COMP2 OUT */
#define TIM_TIM5_TI1_GPIO 0x00000000U /* !< TIM5_TI1 is connected to GPIO */
#define TIM_TIM5_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /* !< TIM5_TI1 is connected to CAN TMP */
#define TIM_TIM5_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /* !< TIM5_TI1 is connected to CAN RTP */
#define TIM_TIM12_TI1_GPIO 0x00000000U /* !< TIM12 TI1 is connected to GPIO */
#define TIM_TIM12_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /* !< TIM12 TI1 is connected to SPDIF FS */
#define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15_TI1 is connected to GPIO */
#define TIM_TIM15_TI1_TIM2_CH1 TIM_TISEL_TI1SEL_0 /* !< TIM15_TI1 is connected to TIM2 CH1 */
#define TIM_TIM15_TI1_TIM3_CH1 TIM_TISEL_TI1SEL_1 /* !< TIM15_TI1 is connected to TIM3 CH1 */
#define TIM_TIM15_TI1_TIM4_CH1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM15_TI1 is connected to TIM4 CH1 */
#define TIM_TIM15_TI1_RCC_LSE (TIM_TISEL_TI1SEL_2) /* !< TIM15_TI1 is connected to RCC LSE */
#define TIM_TIM15_TI1_RCC_CSI (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /* !< TIM15_TI1 is connected to RCC CSI */
#define TIM_TIM15_TI1_RCC_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_1) /* !< TIM15_TI1 is connected to RCC MCO2 */
#define TIM_TIM15_TI2_GPIO 0x00000000U /* !< TIM15_TI2 is connected to GPIO */
#define TIM_TIM15_TI2_TIM2_CH2 (TIM_TISEL_TI2SEL_0) /* !< TIM15_TI2 is connected to TIM2 CH2 */
#define TIM_TIM15_TI2_TIM3_CH2 (TIM_TISEL_TI2SEL_1) /* !< TIM15_TI2 is connected to TIM3 CH2 */
#define TIM_TIM15_TI2_TIM4_CH2 (TIM_TISEL_TI2SEL_0 | TIM_TISEL_TI2SEL_1) /* !< TIM15_TI2 is connected to TIM4 CH2 */
#define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16 TI1 is connected to GPIO */
#define TIM_TIM16_TI1_RCC_LSI TIM_TISEL_TI1SEL_0 /* !< TIM16 TI1 is connected to RCC LSI */
#define TIM_TIM16_TI1_RCC_LSE TIM_TISEL_TI1SEL_1 /* !< TIM16 TI1 is connected to RCC LSE */
#define TIM_TIM16_TI1_WKUP_IT (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM16 TI1 is connected to WKUP_IT */
#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17 TI1 is connected to GPIO */
#define TIM_TIM17_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /* !< TIM17 TI1 is connected to SPDIF FS */
#define TIM_TIM17_TI1_RCC_HSE1MHZ TIM_TISEL_TI1SEL_1 /* !< TIM17 TI1 is connected to RCC HSE 1Mhz */
#define TIM_TIM17_TI1_RCC_MCO1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /* !< TIM17 TI1 is connected to RCC MCO1 */
#define TIM_TIM23_TI4_GPIO 0x00000000U /* !< TIM23_TI4 is connected to GPIO */
#define TIM_TIM23_TI4_COMP1 TIM_TISEL_TI4SEL_0 /* !< TIM23_TI4 is connected to COMP1 OUT */
#define TIM_TIM23_TI4_COMP2 TIM_TISEL_TI4SEL_1 /* !< TIM23_TI4 is connected to COMP2 OUT */
#define TIM_TIM23_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /* !< TIM23_TI4 is connected to COMP1 OUT or COMP2 OUT */
#define TIM_TIM24_TI1_GPIO 0x00000000U /* !< TIM24_TI1 is connected to GPIO */
#define TIM_TIM24_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /* !< TIM24_TI1 is connected to CAN TMP */
#define TIM_TIM24_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /* !< TIM24_TI1 is connected to CAN RTP */
#define TIM_TIM24_TI1_CAN_SOC (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /* !< TIM24_TI1 is connected to CAN SOC */
/**
* @}
*/
/**
* @}
*/
/* End of exported constants -------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
* @{
*/
/**
* @}
*/
/* End of exported macro -----------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
* @{
*/
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \
((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1))
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
#define IS_TIM_TISEL(__TISEL__) (((__TISEL__) == TIM_TIM1_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM1_TI1_COMP1) ||\
((__TISEL__) == TIM_TIM8_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM8_TI1_COMP2) ||\
((__TISEL__) == TIM_TIM2_TI4_GPIO) ||\
((__TISEL__) == TIM_TIM2_TI4_COMP1) ||\
((__TISEL__) == TIM_TIM2_TI4_COMP2) ||\
((__TISEL__) == TIM_TIM2_TI4_COMP1_COMP2) ||\
((__TISEL__) == TIM_TIM3_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM3_TI1_COMP1) ||\
((__TISEL__) == TIM_TIM3_TI1_COMP2) ||\
((__TISEL__) == TIM_TIM3_TI1_COMP1_COMP2) ||\
((__TISEL__) == TIM_TIM5_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM5_TI1_CAN_TMP) ||\
((__TISEL__) == TIM_TIM5_TI1_CAN_RTP) ||\
((__TISEL__) == TIM_TIM12_TI1_SPDIF_FS) ||\
((__TISEL__) == TIM_TIM12_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM15_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM15_TI1_TIM2_CH1) ||\
((__TISEL__) == TIM_TIM15_TI1_TIM3_CH1) ||\
((__TISEL__) == TIM_TIM15_TI1_TIM4_CH1) ||\
((__TISEL__) == TIM_TIM15_TI1_RCC_LSE) ||\
((__TISEL__) == TIM_TIM15_TI1_RCC_CSI) ||\
((__TISEL__) == TIM_TIM15_TI1_RCC_MCO2) ||\
((__TISEL__) == TIM_TIM15_TI2_GPIO) ||\
((__TISEL__) == TIM_TIM15_TI2_TIM2_CH2) ||\
((__TISEL__) == TIM_TIM15_TI2_TIM3_CH2) ||\
((__TISEL__) == TIM_TIM15_TI2_TIM4_CH2) ||\
((__TISEL__) == TIM_TIM16_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM16_TI1_RCC_LSI) ||\
((__TISEL__) == TIM_TIM16_TI1_RCC_LSE) ||\
((__TISEL__) == TIM_TIM16_TI1_WKUP_IT) ||\
((__TISEL__) == TIM_TIM17_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM17_TI1_SPDIF_FS) ||\
((__TISEL__) == TIM_TIM17_TI1_RCC_HSE1MHZ) ||\
((__TISEL__) == TIM_TIM17_TI1_RCC_MCO1) ||\
((__TISEL__) == TIM_TIM23_TI4_GPIO) ||\
((__TISEL__) == TIM_TIM23_TI4_COMP1) ||\
((__TISEL__) == TIM_TIM23_TI4_COMP2) ||\
((__TISEL__) == TIM_TIM23_TI4_COMP1_COMP2) ||\
((__TISEL__) == TIM_TIM24_TI1_GPIO) ||\
((__TISEL__) == TIM_TIM24_TI1_CAN_TMP) ||\
((__TISEL__) == TIM_TIM24_TI1_CAN_RTP) ||\
((__TISEL__) == TIM_TIM24_TI1_CAN_SOC))
#define IS_TIM_REMAP(__RREMAP__) (((__RREMAP__) == TIM_TIM1_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD1) ||\
((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD2) ||\
((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD3) ||\
((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD1) ||\
((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD2) ||\
((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD3) ||\
((__RREMAP__) == TIM_TIM1_ETR_COMP1) ||\
((__RREMAP__) == TIM_TIM1_ETR_COMP2) ||\
((__RREMAP__) == TIM_TIM8_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD1) ||\
((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD2) ||\
((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD3) ||\
((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD1) ||\
((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD2) ||\
((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD3) ||\
((__RREMAP__) == TIM_TIM8_ETR_COMP1) ||\
((__RREMAP__) == TIM_TIM8_ETR_COMP2) ||\
((__RREMAP__) == TIM_TIM2_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM2_ETR_COMP1) ||\
((__RREMAP__) == TIM_TIM2_ETR_COMP2) ||\
((__RREMAP__) == TIM_TIM2_ETR_RCC_LSE) ||\
((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSA) ||\
((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSB) ||\
((__RREMAP__) == TIM_TIM3_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM3_ETR_COMP1) ||\
((__RREMAP__) == TIM_TIM5_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSA) ||\
((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSB) ||\
((__RREMAP__) == TIM_TIM23_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM23_ETR_COMP1) ||\
((__RREMAP__) == TIM_TIM23_ETR_COMP2) ||\
((__RREMAP__) == TIM_TIM24_ETR_GPIO) ||\
((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSA) ||\
((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSB) ||\
((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSA) ||\
((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSB))
/**
* @}
*/
/* End of private macro ------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
* @{
*/
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
* @brief Timer Hall Sensor functions
* @{
*/
/* Timer Hall Sensor functions **********************************************/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
* @brief Timer Complementary Output Compare functions
* @{
*/
/* Timer Complementary Output Compare functions *****************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
* @brief Timer Complementary PWM functions
* @{
*/
/* Timer Complementary PWM functions ****************************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
* @brief Timer Complementary One Pulse functions
* @{
*/
/* Timer Complementary One Pulse functions **********************************/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
* @brief Peripheral Control functions
* @{
*/
/* Extended Control functions ************************************************/
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
uint32_t CommutationSource);
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
TIM_MasterConfigTypeDef *sMasterConfig);
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
#if defined(TIM_BREAK_INPUT_SUPPORT)
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
#endif /* TIM_BREAK_INPUT_SUPPORT */
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
* @brief Extended Callbacks functions
* @{
*/
/* Extended Callback **********************************************************/
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
/**
* @}
*/
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
* @brief Extended Peripheral State functions
* @{
*/
/* Extended Peripheral State functions ***************************************/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN);
/**
* @}
*/
/**
* @}
*/
/* End of exported functions -------------------------------------------------*/
/* Private functions----------------------------------------------------------*/
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
* @{
*/
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
/**
* @}
*/
/* End of private functions --------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_TIM_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1655
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h Normal file
View File

File diff suppressed because it is too large Load Diff

864
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h Normal file
View File

@@ -0,0 +1,864 @@
/**
******************************************************************************
* @file stm32h7xx_hal_uart_ex.h
* @author MCD Application Team
* @brief Header file of UART HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_UART_EX_H
#define STM32H7xx_HAL_UART_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup UARTEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
* @{
*/
/**
* @brief UART wake up from stop mode parameters
*/
typedef struct
{
uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF).
This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
be filled up. */
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */
uint8_t Address; /*!< UART/USART node address (7-bit long max). */
} UART_WakeUpTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
*/
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */
#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */
#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */
/**
* @}
*/
/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
* @{
*/
#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */
#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */
/**
* @}
*/
/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode
* @brief UART FIFO mode
* @{
*/
#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */
/**
* @}
*/
/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level
* @brief UART TXFIFO threshold level
* @{
*/
#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */
#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */
#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */
#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */
#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */
#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */
/**
* @}
*/
/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level
* @brief UART RXFIFO threshold level
* @{
*/
#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */
#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */
#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */
#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */
#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */
#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UARTEx_Exported_Functions
* @{
*/
/** @addtogroup UARTEx_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
uint32_t DeassertionTime);
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
* @{
*/
void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart);
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group3
* @{
*/
/* Peripheral Control functions **********************************************/
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
* @{
*/
/** @brief Report the UART clock source.
* @param __HANDLE__ specifies the UART Handle.
* @param __CLOCKSOURCE__ output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#if defined(UART9) && defined(USART10)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_D2PCLK2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \
break; \
case RCC_USART1CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART1CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_USART2CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART2CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
switch(__HAL_RCC_GET_USART3_SOURCE()) \
{ \
case RCC_USART3CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_USART3CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART3CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART3CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART3CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART3CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART4) \
{ \
switch(__HAL_RCC_GET_UART4_SOURCE()) \
{ \
case RCC_UART4CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART4CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART4CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART4CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART4CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART4CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if ((__HANDLE__)->Instance == UART5) \
{ \
switch(__HAL_RCC_GET_UART5_SOURCE()) \
{ \
case RCC_UART5CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART5CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART5CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART5CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART5CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART5CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART6) \
{ \
switch(__HAL_RCC_GET_USART6_SOURCE()) \
{ \
case RCC_USART6CLKSOURCE_D2PCLK2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \
break; \
case RCC_USART6CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART6CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART6CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART6CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART6CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART7) \
{ \
switch(__HAL_RCC_GET_UART7_SOURCE()) \
{ \
case RCC_UART7CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART7CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART7CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART7CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART7CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART7CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART8) \
{ \
switch(__HAL_RCC_GET_UART8_SOURCE()) \
{ \
case RCC_UART8CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART8CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART8CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART8CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART8CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART8CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART9) \
{ \
switch(__HAL_RCC_GET_UART9_SOURCE()) \
{ \
case RCC_UART9CLKSOURCE_D2PCLK2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \
break; \
case RCC_UART9CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART9CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART9CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART9CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART9CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART10) \
{ \
switch(__HAL_RCC_GET_USART10_SOURCE()) \
{ \
case RCC_USART10CLKSOURCE_D2PCLK2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \
break; \
case RCC_USART10CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART10CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART10CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART10CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART10CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == LPUART1) \
{ \
switch(__HAL_RCC_GET_LPUART1_SOURCE()) \
{ \
case RCC_LPUART1CLKSOURCE_D3PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D3PCLK1; \
break; \
case RCC_LPUART1CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_LPUART1CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_LPUART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_LPUART1CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_LPUART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#else
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
case RCC_USART1CLKSOURCE_D2PCLK2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \
break; \
case RCC_USART1CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART1CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART1CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART2) \
{ \
switch(__HAL_RCC_GET_USART2_SOURCE()) \
{ \
case RCC_USART2CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_USART2CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART2CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART2CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART2CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART2CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART3) \
{ \
switch(__HAL_RCC_GET_USART3_SOURCE()) \
{ \
case RCC_USART3CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_USART3CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART3CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART3CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART3CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART3CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART4) \
{ \
switch(__HAL_RCC_GET_UART4_SOURCE()) \
{ \
case RCC_UART4CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART4CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART4CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART4CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART4CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART4CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if ((__HANDLE__)->Instance == UART5) \
{ \
switch(__HAL_RCC_GET_UART5_SOURCE()) \
{ \
case RCC_UART5CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART5CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART5CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART5CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART5CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART5CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == USART6) \
{ \
switch(__HAL_RCC_GET_USART6_SOURCE()) \
{ \
case RCC_USART6CLKSOURCE_D2PCLK2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \
break; \
case RCC_USART6CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_USART6CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_USART6CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_USART6CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_USART6CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART7) \
{ \
switch(__HAL_RCC_GET_UART7_SOURCE()) \
{ \
case RCC_UART7CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART7CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART7CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART7CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART7CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART7CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == UART8) \
{ \
switch(__HAL_RCC_GET_UART8_SOURCE()) \
{ \
case RCC_UART8CLKSOURCE_D2PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \
break; \
case RCC_UART8CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_UART8CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_UART8CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_UART8CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_UART8CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else if((__HANDLE__)->Instance == LPUART1) \
{ \
switch(__HAL_RCC_GET_LPUART1_SOURCE()) \
{ \
case RCC_LPUART1CLKSOURCE_D3PCLK1: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_D3PCLK1; \
break; \
case RCC_LPUART1CLKSOURCE_PLL2: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \
break; \
case RCC_LPUART1CLKSOURCE_PLL3: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \
break; \
case RCC_LPUART1CLKSOURCE_HSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
break; \
case RCC_LPUART1CLKSOURCE_CSI: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \
break; \
case RCC_LPUART1CLKSOURCE_LSE: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
break; \
default: \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
break; \
} \
} \
else \
{ \
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
#endif /* UART9 && USART10 */
/** @brief Report the UART mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
* @note If PCE = 1, the parity bit is not included in the data extracted
* by the reception API().
* This masking operation is not carried out in the case of
* DMA transfers.
* @param __HANDLE__ specifies the UART Handle.
* @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
*/
#define UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x01FFU ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x00FFU ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x00FFU ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x007FU ; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
(__HANDLE__)->Mask = 0x007FU ; \
} \
else \
{ \
(__HANDLE__)->Mask = 0x003FU ; \
} \
} \
else \
{ \
(__HANDLE__)->Mask = 0x0000U; \
} \
} while(0U)
/**
* @brief Ensure that UART frame length is valid.
* @param __LENGTH__ UART frame length.
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
*/
#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
((__LENGTH__) == UART_WORDLENGTH_8B) || \
((__LENGTH__) == UART_WORDLENGTH_9B))
/**
* @brief Ensure that UART wake-up address length is valid.
* @param __ADDRESS__ UART wake-up address length.
* @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid)
*/
#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
/**
* @brief Ensure that UART TXFIFO threshold level is valid.
* @param __THRESHOLD__ UART TXFIFO threshold level.
* @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid)
*/
#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \
((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8))
/**
* @brief Ensure that UART RXFIFO threshold level is valid.
* @param __THRESHOLD__ UART RXFIFO threshold level.
* @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid)
*/
#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \
((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_UART_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

506
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usb.h Normal file
View File

@@ -0,0 +1,506 @@
/**
******************************************************************************
* @file stm32h7xx_ll_usb.h
* @author MCD Application Team
* @brief Header file of USB Low Layer HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_LL_USB_H
#define STM32H7xx_LL_USB_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup USB_LL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief USB Mode definition
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
typedef enum
{
USB_DEVICE_MODE = 0,
USB_HOST_MODE = 1,
USB_DRD_MODE = 2
} USB_OTG_ModeTypeDef;
/**
* @brief URB States definition
*/
typedef enum
{
URB_IDLE = 0,
URB_DONE,
URB_NOTREADY,
URB_NYET,
URB_ERROR,
URB_STALL
} USB_OTG_URBStateTypeDef;
/**
* @brief Host channel States definition
*/
typedef enum
{
HC_IDLE = 0,
HC_XFRC,
HC_HALTED,
HC_NAK,
HC_NYET,
HC_STALL,
HC_XACTERR,
HC_BBLERR,
HC_DATATGLERR
} USB_OTG_HCStateTypeDef;
/**
* @brief USB OTG Initialization Structure definition
*/
typedef struct
{
uint32_t dev_endpoints; /*!< Device Endpoints number.
This parameter depends on the used USB core.
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t Host_channels; /*!< Host Channels number.
This parameter Depends on the used USB core.
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
This parameter can be any value of @ref USB_Core_Speed_ */
uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */
uint32_t phy_itface; /*!< Select the used PHY interface.
This parameter can be any value of @ref USB_Core_PHY_ */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
} USB_OTG_CfgTypeDef;
typedef struct
{
uint8_t num; /*!< Endpoint number
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint8_t is_in; /*!< Endpoint direction
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t is_stall; /*!< Endpoint stall condition
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
This parameter can be any value of @ref USB_EP_Type_ */
uint8_t data_pid_start; /*!< Initial data PID
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t even_odd_frame; /*!< IFrame parity
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint16_t tx_fifo_num; /*!< Transmission FIFO number
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t maxpacket; /*!< Endpoint Max packet size
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
uint32_t xfer_len; /*!< Current transfer length */
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
} USB_OTG_EPTypeDef;
typedef struct
{
uint8_t dev_addr; /*!< USB device address.
This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
uint8_t ch_num; /*!< Host channel number.
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint8_t ep_num; /*!< Endpoint number.
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint8_t ep_is_in; /*!< Endpoint direction
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t speed; /*!< USB Host speed.
This parameter can be any value of @ref USB_Core_Speed_ */
uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
uint8_t ep_type; /*!< Endpoint Type.
This parameter can be any value of @ref USB_EP_Type_ */
uint16_t max_packet; /*!< Endpoint Max packet size.
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
uint8_t data_pid; /*!< Initial data PID.
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
uint32_t xfer_len; /*!< Current transfer length. */
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
uint8_t toggle_in; /*!< IN transfer current toggle flag.
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t toggle_out; /*!< OUT transfer current toggle flag
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
uint32_t ErrCnt; /*!< Host channel error count.*/
USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
} USB_OTG_HCTypeDef;
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/* Exported constants --------------------------------------------------------*/
/** @defgroup PCD_Exported_Constants PCD Exported Constants
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/** @defgroup USB_OTG_CORE VERSION ID
* @{
*/
#define USB_OTG_CORE_ID_300A 0x4F54300AU
#define USB_OTG_CORE_ID_310A 0x4F54310AU
/**
* @}
*/
/** @defgroup USB_Core_Mode_ USB Core Mode
* @{
*/
#define USB_OTG_MODE_DEVICE 0U
#define USB_OTG_MODE_HOST 1U
#define USB_OTG_MODE_DRD 2U
/**
* @}
*/
/** @defgroup USB_LL Device Speed
* @{
*/
#define USBD_HS_SPEED 0U
#define USBD_HSINFS_SPEED 1U
#define USBH_HS_SPEED 0U
#define USBD_FS_SPEED 2U
#define USBH_FSLS_SPEED 1U
/**
* @}
*/
/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
* @{
*/
#define USB_OTG_SPEED_HIGH 0U
#define USB_OTG_SPEED_HIGH_IN_FULL 1U
#define USB_OTG_SPEED_FULL 3U
/**
* @}
*/
/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
* @{
*/
#define USB_OTG_ULPI_PHY 1U
#define USB_OTG_EMBEDDED_PHY 2U
/**
* @}
*/
/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value
* @{
*/
#ifndef USBD_HS_TRDT_VALUE
#define USBD_HS_TRDT_VALUE 9U
#endif /* USBD_HS_TRDT_VALUE */
#ifndef USBD_FS_TRDT_VALUE
#define USBD_FS_TRDT_VALUE 5U
#define USBD_DEFAULT_TRDT_VALUE 9U
#endif /* USBD_HS_TRDT_VALUE */
/**
* @}
*/
/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
* @{
*/
#define USB_OTG_HS_MAX_PACKET_SIZE 512U
#define USB_OTG_FS_MAX_PACKET_SIZE 64U
#define USB_OTG_MAX_EP0_SIZE 64U
/**
* @}
*/
/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
* @{
*/
#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1)
#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1)
#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1)
/**
* @}
*/
/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
* @{
*/
#define DCFG_FRAME_INTERVAL_80 0U
#define DCFG_FRAME_INTERVAL_85 1U
#define DCFG_FRAME_INTERVAL_90 2U
#define DCFG_FRAME_INTERVAL_95 3U
/**
* @}
*/
/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0U
#define DEP0CTL_MPS_32 1U
#define DEP0CTL_MPS_16 2U
#define DEP0CTL_MPS_8 3U
/**
* @}
*/
/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
* @{
*/
#define EP_SPEED_LOW 0U
#define EP_SPEED_FULL 1U
#define EP_SPEED_HIGH 2U
/**
* @}
*/
/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
* @{
*/
#define EP_TYPE_CTRL 0U
#define EP_TYPE_ISOC 1U
#define EP_TYPE_BULK 2U
#define EP_TYPE_INTR 3U
#define EP_TYPE_MSK 3U
/**
* @}
*/
/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
* @{
*/
#define STS_GOUT_NAK 1U
#define STS_DATA_UPDT 2U
#define STS_XFER_COMP 3U
#define STS_SETUP_COMP 4U
#define STS_SETUP_UPDT 6U
/**
* @}
*/
/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
* @{
*/
#define HCFG_30_60_MHZ 0U
#define HCFG_48_MHZ 1U
#define HCFG_6_MHZ 2U
/**
* @}
*/
/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
* @{
*/
#define HPRT0_PRTSPD_HIGH_SPEED 0U
#define HPRT0_PRTSPD_FULL_SPEED 1U
#define HPRT0_PRTSPD_LOW_SPEED 2U
/**
* @}
*/
#define HCCHAR_CTRL 0U
#define HCCHAR_ISOC 1U
#define HCCHAR_BULK 2U
#define HCCHAR_INTR 3U
#define HC_PID_DATA0 0U
#define HC_PID_DATA2 1U
#define HC_PID_DATA1 2U
#define HC_PID_SETUP 3U
#define GRXSTS_PKTSTS_IN 2U
#define GRXSTS_PKTSTS_IN_XFER_COMP 3U
#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U
#define GRXSTS_PKTSTS_CH_HALTED 7U
#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE)
#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE))
#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE))
#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
#define EP_ADDR_MSK 0xFU
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed);
HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode);
HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed);
HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num);
HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address);
HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq);
HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
uint8_t epnum, uint8_t dev_address, uint8_t speed,
uint8_t ep_type, uint16_t mps);
HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num);
HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_LL_USB_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1312
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c Normal file
View File

File diff suppressed because it is too large Load Diff

533
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c Normal file
View File

@@ -0,0 +1,533 @@
/**
******************************************************************************
* @file stm32h7xx_hal_cortex.c
* @author MCD Application Team
* @brief CORTEX HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the CORTEX:
* + Initialization and de-initialization functions
* + Peripheral Control functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
*** How to configure Interrupts using CORTEX HAL driver ***
===========================================================
[..]
This section provides functions allowing to configure the NVIC interrupts (IRQ).
The Cortex-M exceptions are managed by CMSIS functions.
(#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
function according to the following table.
(#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
(#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
(#) please refer to programming manual for details in how to configure priority.
-@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
The pending IRQ priority will be managed only by the sub priority.
-@- IRQ priority order (sorted by highest to lowest priority):
(+@) Lowest preemption priority
(+@) Lowest sub priority
(+@) Lowest hardware priority (IRQ number)
[..]
*** How to configure Systick using CORTEX HAL driver ***
========================================================
[..]
Setup SysTick Timer for time base.
(+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
is a CMSIS function that:
(++) Configures the SysTick Reload register with value passed as function parameter.
(++) Configures the SysTick IRQ priority to the lowest value (0x0F).
(++) Resets the SysTick Counter register.
(++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
(++) Enables the SysTick Interrupt.
(++) Starts the SysTick Counter.
(+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined
inside the stm32h7xx_hal_cortex.h file.
(+) You can change the SysTick IRQ priority by calling the
HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
(+) To adjust the SysTick time base, use the following formula:
Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
(++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
(++) Reload Value should not exceed 0xFFFFFF
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup CORTEX CORTEX
* @brief CORTEX HAL module driver
* @{
*/
#ifdef HAL_CORTEX_MODULE_ENABLED
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de-initialization functions #####
==============================================================================
[..]
This section provides the CORTEX HAL driver functions allowing to configure Interrupts
Systick functionalities
@endverbatim
* @{
*/
/**
* @brief Sets the priority grouping field (preemption priority and subpriority)
* using the required unlock sequence.
* @param PriorityGroup The priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
* 4 bits for subpriority
* @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
* 3 bits for subpriority
* @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
* 2 bits for subpriority
* @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
* 1 bits for subpriority
* @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
* 0 bits for subpriority
* @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
* @retval None
*/
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
NVIC_SetPriorityGrouping(PriorityGroup);
}
/**
* @brief Sets the priority of an interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @param PreemptPriority The preemption priority for the IRQn channel.
* This parameter can be a value between 0 and 15
* A lower priority value indicates a higher priority
* @param SubPriority the subpriority level for the IRQ channel.
* This parameter can be a value between 0 and 15
* A lower priority value indicates a higher priority.
* @retval None
*/
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t prioritygroup;
/* Check the parameters */
assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
prioritygroup = NVIC_GetPriorityGrouping();
NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
}
/**
* @brief Enables a device specific interrupt in the NVIC interrupt controller.
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
* function should be called before.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @retval None
*/
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Enable interrupt */
NVIC_EnableIRQ(IRQn);
}
/**
* @brief Disables a device specific interrupt in the NVIC interrupt controller.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @retval None
*/
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Disable interrupt */
NVIC_DisableIRQ(IRQn);
}
/**
* @brief Initiates a system reset request to reset the MCU.
* @retval None
*/
void HAL_NVIC_SystemReset(void)
{
/* System Reset */
NVIC_SystemReset();
}
/**
* @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
* Counter is in free running mode to generate periodic interrupts.
* @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
* @retval status - 0 Function succeeded.
* - 1 Function failed.
*/
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
{
return SysTick_Config(TicksNumb);
}
/**
* @}
*/
/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
* @brief Cortex control functions
*
@verbatim
==============================================================================
##### Peripheral Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control the CORTEX
(NVIC, SYSTICK, MPU) functionalities.
@endverbatim
* @{
*/
#if (__MPU_PRESENT == 1)
/**
* @brief Disables the MPU
* @retval None
*/
void HAL_MPU_Disable(void)
{
/* Make sure outstanding transfers are done */
__DMB();
/* Disable fault exceptions */
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
/* Disable the MPU and clear the control register*/
MPU->CTRL = 0;
}
/**
* @brief Enables the MPU
* @param MPU_Control Specifies the control mode of the MPU during hard fault,
* NMI, FAULTMASK and privileged access to the default memory
* This parameter can be one of the following values:
* @arg MPU_HFNMI_PRIVDEF_NONE
* @arg MPU_HARDFAULT_NMI
* @arg MPU_PRIVILEGED_DEFAULT
* @arg MPU_HFNMI_PRIVDEF
* @retval None
*/
void HAL_MPU_Enable(uint32_t MPU_Control)
{
/* Enable the MPU */
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
/* Enable fault exceptions */
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
/* Ensure MPU setting take effects */
__DSB();
__ISB();
}
/**
* @brief Initializes and configures the Region and the memory to be protected.
* @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
* the initialization and configuration information.
* @retval None
*/
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
{
/* Check the parameters */
assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
/* Set the Region number */
MPU->RNR = MPU_Init->Number;
if ((MPU_Init->Enable) != 0UL)
{
/* Check the parameters */
assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
MPU->RBAR = MPU_Init->BaseAddress;
MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
}
else
{
MPU->RBAR = 0x00;
MPU->RASR = 0x00;
}
}
#endif /* __MPU_PRESENT */
/**
* @brief Gets the priority grouping field from the NVIC Interrupt Controller.
* @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
*/
uint32_t HAL_NVIC_GetPriorityGrouping(void)
{
/* Get the PRIGROUP[10:8] field value */
return NVIC_GetPriorityGrouping();
}
/**
* @brief Gets the priority of an interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @param PriorityGroup the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
* 4 bits for subpriority
* @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
* 3 bits for subpriority
* @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
* 2 bits for subpriority
* @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
* 1 bits for subpriority
* @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
* 0 bits for subpriority
* @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
* @param pSubPriority Pointer on the Subpriority value (starting from 0).
* @retval None
*/
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
/* Get priority for Cortex-M system or device specific interrupts */
NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
}
/**
* @brief Sets Pending bit of an external interrupt.
* @param IRQn External interrupt number
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @retval None
*/
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Set interrupt pending */
NVIC_SetPendingIRQ(IRQn);
}
/**
* @brief Gets Pending Interrupt (reads the pending register in the NVIC
* and returns the pending bit for the specified interrupt).
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @retval status - 0 Interrupt status is not pending.
* - 1 Interrupt status is pending.
*/
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Return 1 if pending else 0 */
return NVIC_GetPendingIRQ(IRQn);
}
/**
* @brief Clears the pending bit of an external interrupt.
* @param IRQn External interrupt number.
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @retval None
*/
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Clear pending interrupt */
NVIC_ClearPendingIRQ(IRQn);
}
/**
* @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
* @param IRQn External interrupt number
* This parameter can be an enumerator of IRQn_Type enumeration
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h))
* @retval status - 0 Interrupt status is not pending.
* - 1 Interrupt status is pending.
*/
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
{
/* Check the parameters */
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
/* Return 1 if active else 0 */
return NVIC_GetActive(IRQn);
}
/**
* @brief Configures the SysTick clock source.
* @param CLKSource specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
{
SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
}
else
{
SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
}
}
/**
* @brief This function handles SYSTICK interrupt request.
* @retval None
*/
void HAL_SYSTICK_IRQHandler(void)
{
HAL_SYSTICK_Callback();
}
/**
* @brief SYSTICK callback.
* @retval None
*/
__weak void HAL_SYSTICK_Callback(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_SYSTICK_Callback could be implemented in the user file
*/
}
#if defined(DUAL_CORE)
/**
* @brief Returns the current CPU ID.
* @retval CPU identifier
*/
uint32_t HAL_GetCurrentCPUID(void)
{
if (((SCB->CPUID & 0x000000F0U) >> 4 )== 0x7U)
{
return CM7_CPUID;
}
else
{
return CM4_CPUID;
}
}
#else
/**
* @brief Returns the current CPU ID.
* @retval CPU identifier
*/
uint32_t HAL_GetCurrentCPUID(void)
{
return CM7_CPUID;
}
#endif /*DUAL_CORE*/
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_CORTEX_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2057
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c Normal file
View File

File diff suppressed because it is too large Load Diff

714
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c Normal file
View File

@@ -0,0 +1,714 @@
/**
******************************************************************************
* @file stm32h7xx_hal_dma_ex.c
* @author MCD Application Team
* @brief DMA Extension HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the DMA Extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The DMA Extension HAL driver can be used as follows:
(+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
(+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
(+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
to respectively enable/disable the request generator.
(+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from
the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler .
As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMA_MUX_IRQHandler should be
called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project
(exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator)
-@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
-@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default.
-@- In Multi (Double) buffer mode, it is possible to update the base address for
the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
-@- Multi (Double) buffer mode is possible with DMA and BDMA instances.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup DMAEx DMAEx
* @brief DMA Extended HAL module driver
* @{
*/
#ifdef HAL_DMA_MODULE_ENABLED
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private Constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @addtogroup DMAEx_Private_Functions
* @{
*/
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
/**
* @}
*/
/* Exported functions ---------------------------------------------------------*/
/** @addtogroup DMAEx_Exported_Functions
* @{
*/
/** @addtogroup DMAEx_Exported_Functions_Group1
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the source, destination address and data length and
Start MultiBuffer DMA transfer
(+) Configure the source, destination address and data length and
Start MultiBuffer DMA transfer with interrupt
(+) Change on the fly the memory0 or memory1 address.
(+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
(+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
(+) Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
to respectively enable/disable the request generator.
(+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from
the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler
@endverbatim
* @{
*/
/**
* @brief Starts the multi_buffer DMA Transfer.
* @param hdma : pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
* @param DataLength: The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
{
HAL_StatusTypeDef status = HAL_OK;
__IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
/* Memory-to-memory transfer not supported in double buffering mode */
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
{
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
status = HAL_ERROR;
}
else
{
/* Process Locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
/* Enable the Double buffer mode */
((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_SxCR_DBM;
/* Configure DMA Stream destination address */
((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress;
/* Calculate the interrupt clear flag register (IFCR) base address */
ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U));
/* Clear all flags */
*ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU);
}
else /* BDMA instance(s) */
{
/* Enable the Double buffer mode */
((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= (BDMA_CCR_DBM | BDMA_CCR_CIRC);
/* Configure DMA Stream destination address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = SecondMemAddress;
/* Calculate the interrupt clear flag register (IFCR) base address */
ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 4U));
/* Clear all flags */
*ifcRegister_Base = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU);
}
if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */
{
/* Configure the source, destination address and the data length */
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
if(hdma->DMAmuxRequestGen != 0U)
{
/* Clear the DMAMUX request generator overrun flag */
hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
}
}
/* Enable the peripheral */
__HAL_DMA_ENABLE(hdma);
}
else
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
/* Return error status */
status = HAL_ERROR;
}
}
return status;
}
/**
* @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
* @param DataLength: The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
{
HAL_StatusTypeDef status = HAL_OK;
__IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
/* Memory-to-memory transfer not supported in double buffering mode */
if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
{
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
return HAL_ERROR;
}
/* Process locked */
__HAL_LOCK(hdma);
if(HAL_DMA_STATE_READY == hdma->State)
{
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
/* Initialize the error code */
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
/* Enable the Double buffer mode */
((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_SxCR_DBM;
/* Configure DMA Stream destination address */
((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress;
/* Calculate the interrupt clear flag register (IFCR) base address */
ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U));
/* Clear all flags */
*ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU);
}
else /* BDMA instance(s) */
{
/* Enable the Double buffer mode */
((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= (BDMA_CCR_DBM | BDMA_CCR_CIRC);
/* Configure DMA Stream destination address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = SecondMemAddress;
/* Calculate the interrupt clear flag register (IFCR) base address */
ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 4U));
/* Clear all flags */
*ifcRegister_Base = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU);
}
/* Configure the source, destination address and the data length */
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */
{
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
if(hdma->DMAmuxRequestGen != 0U)
{
/* Clear the DMAMUX request generator overrun flag */
hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
}
}
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
/* Enable Common interrupts*/
MODIFY_REG(((DMA_Stream_TypeDef *)hdma->Instance)->CR, (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT), (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME));
((DMA_Stream_TypeDef *)hdma->Instance)->FCR |= DMA_IT_FE;
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
{
/*Enable Half Transfer IT if corresponding Callback is set*/
((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_IT_HT;
}
}
else /* BDMA instance(s) */
{
/* Enable Common interrupts*/
MODIFY_REG(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR, (BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE), (BDMA_CCR_TCIE | BDMA_CCR_TEIE));
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
{
/*Enable Half Transfer IT if corresponding Callback is set*/
((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= BDMA_CCR_HTIE;
}
}
if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */
{
/* Check if DMAMUX Synchronization is enabled*/
if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U)
{
/* Enable DMAMUX sync overrun IT*/
hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE;
}
if(hdma->DMAmuxRequestGen != 0U)
{
/* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/
/* enable the request gen overrun IT*/
hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE;
}
}
/* Enable the peripheral */
__HAL_DMA_ENABLE(hdma);
}
else
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
/* Return error status */
status = HAL_ERROR;
}
return status;
}
/**
* @brief Change the memory0 or memory1 address on the fly.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param Address: The new address
* @param memory: the memory to be changed, This parameter can be one of
* the following values:
* MEMORY0 /
* MEMORY1
* @note The MEMORY0 address can be changed only when the current transfer use
* MEMORY1 and the MEMORY1 address can be changed only when the current
* transfer use MEMORY0.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
{
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
if(memory == MEMORY0)
{
/* change the memory0 address */
((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = Address;
}
else
{
/* change the memory1 address */
((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = Address;
}
}
else /* BDMA instance(s) */
{
if(memory == MEMORY0)
{
/* change the memory0 address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = Address;
}
else
{
/* change the memory1 address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = Address;
}
}
return HAL_OK;
}
/**
* @brief Configure the DMAMUX synchronization parameters for a given DMA stream (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig)
{
uint32_t syncSignalID = 0;
uint32_t syncPolarity = 0;
/* Check the parameters */
assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance));
assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable));
assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable));
assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber));
if(pSyncConfig->SyncEnable == ENABLE)
{
assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig->SyncPolarity));
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
assert_param(IS_DMA_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID));
}
else
{
assert_param(IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID));
}
syncSignalID = pSyncConfig->SyncSignalID;
syncPolarity = pSyncConfig->SyncPolarity;
}
/*Check if the DMA state is ready */
if(hdma->State == HAL_DMA_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hdma);
/* Disable the synchronization and event generation before applying a new config */
CLEAR_BIT(hdma->DMAmuxChannel->CCR,(DMAMUX_CxCR_SE | DMAMUX_CxCR_EGE));
/* Set the new synchronization parameters (and keep the request ID filled during the Init)*/
MODIFY_REG( hdma->DMAmuxChannel->CCR, \
(~DMAMUX_CxCR_DMAREQ_ID) , \
(syncSignalID << DMAMUX_CxCR_SYNC_ID_Pos) | \
((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \
syncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \
((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos));
/* Process Locked */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
else
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
/* Return error status */
return HAL_ERROR;
}
}
/**
* @brief Configure the DMAMUX request generator block used by the given DMA stream (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef :
* contains the request generator parameters.
*
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
{
HAL_StatusTypeDef status;
HAL_DMA_StateTypeDef temp_state = hdma->State;
/* Check the parameters */
assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance));
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
assert_param(IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID));
}
else
{
assert_param(IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID));
}
assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity));
assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if(hdma->DMAmuxRequestGen == 0U)
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
/* error status */
status = HAL_ERROR;
}
else if(((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY))
{
/* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */
/* Process Locked */
__HAL_LOCK(hdma);
/* Set the request generator new parameters */
hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \
((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos)| \
pRequestGeneratorConfig->Polarity;
/* Process Locked */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
else
{
/* Set the error code to busy */
hdma->ErrorCode = HAL_DMA_ERROR_BUSY;
/* error status */
status = HAL_ERROR;
}
return status;
}
/**
* @brief Enable the DMAMUX request generator block used by the given DMA stream (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma)
{
/* Check the parameters */
assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block */
if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U))
{
/* Enable the request generator*/
hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE;
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Disable the DMAMUX request generator block used by the given DMA stream (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma)
{
/* Check the parameters */
assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block */
if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U))
{
/* Disable the request generator*/
hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE;
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Handles DMAMUX interrupt request.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @retval None
*/
void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma)
{
/* Check for DMAMUX Synchronization overrun */
if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
{
/* Disable the synchro overrun interrupt */
hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE;
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_SYNC;
if(hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
if(hdma->DMAmuxRequestGen != 0)
{
/* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
{
/* Disable the request gen overrun interrupt */
hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE;
/* Clear the DMAMUX request generator overrun flag */
hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN;
if(hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
}
}
/**
* @}
*/
/**
* @}
*/
/** @addtogroup DMAEx_Private_Functions
* @{
*/
/**
* @brief Set the DMA Transfer parameter.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param DataLength: The length of data to be transferred from source to destination
* @retval HAL status
*/
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
{
if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */
{
/* Configure DMA Stream data length */
((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = DataLength;
/* Peripheral to Memory */
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
{
/* Configure DMA Stream destination address */
((DMA_Stream_TypeDef *)hdma->Instance)->PAR = DstAddress;
/* Configure DMA Stream source address */
((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = SrcAddress;
}
/* Memory to Peripheral */
else
{
/* Configure DMA Stream source address */
((DMA_Stream_TypeDef *)hdma->Instance)->PAR = SrcAddress;
/* Configure DMA Stream destination address */
((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = DstAddress;
}
}
else /* BDMA instance(s) */
{
/* Configure DMA Stream data length */
((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = DataLength;
/* Peripheral to Memory */
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
{
/* Configure DMA Stream destination address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = DstAddress;
/* Configure DMA Stream source address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = SrcAddress;
}
/* Memory to Peripheral */
else
{
/* Configure DMA Stream source address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = SrcAddress;
/* Configure DMA Stream destination address */
((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = DstAddress;
}
}
}
/**
* @}
*/
#endif /* HAL_DMA_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

877
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c Normal file
View File

@@ -0,0 +1,877 @@
/**
******************************************************************************
* @file stm32h7xx_hal_exti.c
* @author MCD Application Team
* @brief EXTI HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (EXTI) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
*
@verbatim
==============================================================================
##### EXTI Peripheral features #####
==============================================================================
[..]
(+) Each Exti line can be configured within this driver.
(+) Exti line can be configured in 3 different modes
(++) Interrupt (CORE1 or CORE2 in case of dual core line )
(++) Event (CORE1 or CORE2 in case of dual core line )
(++) a combination of the previous
(+) Configurable Exti lines can be configured with 3 different triggers
(++) Rising
(++) Falling
(++) Both of them
(+) When set in interrupt mode, configurable Exti lines have two diffenrents
interrupt pending registers which allow to distinguish which transition
occurs:
(++) Rising edge pending interrupt
(++) Falling
(+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
be selected throught multiplexer.
(+) PendClearSource used to set the D3 Smart Run Domain autoamtic pend clear soure.
It is applicable for line with wkaeup target is Any (CPU1 , CPU2 and D3 smart run domain).
Value can be one of the following:
(++) EXTI_D3_PENDCLR_SRC_NONE : no pend clear source is selcted :
In this case corresponding bit of D2PMRx register is set to 0
(+++) On a configurable Line : the D3 domain wakeup signal is
automatically cleared after after the Delay + Rising Edge detect
(+++) On a direct Line : the D3 domain wakeup signal is
cleared after the direct event input signal is cleared
(++) EXTI_D3_PENDCLR_SRC_DMACH6 : no pend clear source is selcted :
In this case corresponding bit of D2PMRx register is set to 1
and corresponding bits(2) of D3PCRxL/H is set to b00 :
DMA ch6 event selected as D3 domain pendclear source
(++) EXTI_D3_PENDCLR_SRC_DMACH7 : no pend clear source is selcted :
In this case corresponding bit of D2PMRx register is set to 1
and corresponding bits(2) of D3PCRxL/H is set to b01 :
DMA ch7 event selected as D3 domain pendclear source
(++) EXTI_D3_PENDCLR_SRC_LPTIM4 : no pend clear source is selcted :
In this case corresponding bit of D2PMRx register is set to 1
and corresponding bits(2) of D3PCRxL/H is set to b10 :
LPTIM4 out selected as D3 domain pendclear source
(++) EXTI_D3_PENDCLR_SRC_LPTIM5 : no pend clear source is selcted :
In this case corresponding bit of D2PMRx register is set to 1
and corresponding bits(2) of D3PCRxL/H is set to b11 :
LPTIM5 out selected as D3 domain pendclear source
##### How to use this driver #####
==============================================================================
[..]
(#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
(++) Choose the interrupt line number by setting "Line" member from
EXTI_ConfigTypeDef structure.
(++) Configure the interrupt and/or event mode using "Mode" member from
EXTI_ConfigTypeDef structure.
(++) For configurable lines, configure rising and/or falling trigger
"Trigger" member from EXTI_ConfigTypeDef structure.
(++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
member from GPIO_InitTypeDef structure.
(++) For Exti lines with wkaeup target is Any (CPU1 , CPU2 and D3 smart run domain),
choose gpio D3 PendClearSource using PendClearSource
member from EXTI_PendClear_Source structure.
(#) Get current Exti configuration of a dedicated line using
HAL_EXTI_GetConfigLine().
(++) Provide exiting handle as parameter.
(++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
(#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
(++) Provide exiting handle as parameter.
(#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
(++) Provide exiting handle as first parameter.
(++) Provide which callback will be registered using one value from
EXTI_CallbackIDTypeDef.
(++) Provide callback function pointer.
(#) Get interrupt pending bit using HAL_EXTI_GetPending().
(#) Clear interrupt pending bit using HAL_EXTI_GetPending().
(#) Generate software interrupt using HAL_EXTI_GenerateSWI().
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup EXTI
* @{
*/
#ifdef HAL_EXTI_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private defines ------------------------------------------------------------*/
/** @defgroup EXTI_Private_Constants EXTI Private Constants
* @{
*/
#define EXTI_MODE_OFFSET 0x04U /* 0x10: offset between CPU IMR/EMR registers */
#define EXTI_CONFIG_OFFSET 0x08U /* 0x20: offset between CPU Rising/Falling configuration registers */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup EXTI_Exported_Functions
* @{
*/
/** @addtogroup EXTI_Exported_Functions_Group1
* @brief Configuration functions
*
@verbatim
===============================================================================
##### Configuration functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Set configuration of a dedicated Exti line.
* @param hexti Exti handle.
* @param pExtiConfig Pointer on EXTI configuration to be set.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
uint32_t pcrlinepos;
/* Check null pointer */
if ((hexti == NULL) || (pExtiConfig == NULL))
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_EXTI_LINE(pExtiConfig->Line));
assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
/* Assign line number to handle */
hexti->Line = pExtiConfig->Line;
/* compute line register offset and line mask */
offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
maskline = (1UL << linepos);
/* Configure triggers for configurable lines */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00U)
{
assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
/* Configure rising trigger */
regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00U)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store rising trigger mode */
*regaddr = regval;
/* Configure falling trigger */
regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00U)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store falling trigger mode */
*regaddr = regval;
/* Configure gpio port selection in case of gpio exti line */
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL];
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03U)));
regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03U)));
SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL] = regval;
}
}
/* Configure interrupt mode : read current mode */
regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00U)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store interrupt mode */
*regaddr = regval;
/* The event mode cannot be configured if the line does not support it */
assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT));
/* Configure event mode : read current mode */
regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00U)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store event mode */
*regaddr = regval;
#if defined (DUAL_CORE)
/* Configure interrupt mode for Core2 : read current mode */
regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_CORE2_INTERRUPT) != 0x00U)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store interrupt mode */
*regaddr = regval;
/* The event mode cannot be configured if the line does not support it */
assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_CORE2_EVENT) != EXTI_MODE_CORE2_EVENT));
/* Configure event mode : read current mode */
regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Mask or set line */
if ((pExtiConfig->Mode & EXTI_MODE_CORE2_EVENT) != 0x00U)
{
regval |= maskline;
}
else
{
regval &= ~maskline;
}
/* Store event mode */
*regaddr = regval;
#endif /* DUAL_CORE */
/* Configure the D3 PendClear source in case of Wakeup target is Any */
if ((pExtiConfig->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)
{
assert_param(IS_EXTI_D3_PENDCLR_SRC(pExtiConfig->PendClearSource));
/*Calc the PMR register address for the given line */
regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
if(pExtiConfig->PendClearSource == EXTI_D3_PENDCLR_SRC_NONE)
{
/* Clear D3PMRx register for the given line */
regval &= ~maskline;
/* Store D3PMRx register value */
*regaddr = regval;
}
else
{
/* Set D3PMRx register to 1 for the given line */
regval |= maskline;
/* Store D3PMRx register value */
*regaddr = regval;
if(linepos < 16UL)
{
regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset));
pcrlinepos = 1UL << linepos;
}
else
{
regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset));
pcrlinepos = 1UL << (linepos - 16UL);
}
regval = (*regaddr & (~(pcrlinepos * pcrlinepos * 3UL))) | (pcrlinepos * pcrlinepos * (pExtiConfig->PendClearSource - 1UL));
*regaddr = regval;
}
}
return HAL_OK;
}
/**
* @brief Get configuration of a dedicated Exti line.
* @param hexti Exti handle.
* @param pExtiConfig Pointer on structure to store Exti configuration.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
uint32_t pcrlinepos;
/* Check null pointer */
if ((hexti == NULL) || (pExtiConfig == NULL))
{
return HAL_ERROR;
}
/* Check the parameter */
assert_param(IS_EXTI_LINE(hexti->Line));
/* Store handle line number to configuration structure */
pExtiConfig->Line = hexti->Line;
/* compute line register offset and line mask */
offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
maskline = (1UL << linepos);
/* 1] Get core mode : interrupt */
regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
pExtiConfig->Mode = EXTI_MODE_NONE;
/* Check if selected line is enable */
if ((regval & maskline) != 0x00U)
{
pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
}
/* Get event mode */
regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Check if selected line is enable */
if ((regval & maskline) != 0x00U)
{
pExtiConfig->Mode |= EXTI_MODE_EVENT;
}
#if defined (DUAL_CORE)
regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Check if selected line is enable */
if ((regval & maskline) != 0x00U)
{
pExtiConfig->Mode = EXTI_MODE_CORE2_INTERRUPT;
}
/* Get event mode */
regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset));
regval = *regaddr;
/* Check if selected line is enable */
if ((regval & maskline) != 0x00U)
{
pExtiConfig->Mode |= EXTI_MODE_CORE2_EVENT;
}
#endif /*DUAL_CORE*/
/* 2] Get trigger for configurable lines : rising */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00U)
{
regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Check if configuration of selected line is enable */
if ((regval & maskline) != 0x00U)
{
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
}
else
{
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
}
/* Get falling configuration */
regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = *regaddr;
/* Check if configuration of selected line is enable */
if ((regval & maskline) != 0x00U)
{
pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
}
/* Get Gpio port selection for gpio lines */
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL];
pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3UL - (linepos & 0x03UL)))) >> 24U);
}
else
{
pExtiConfig->GPIOSel = 0x00U;
}
}
else
{
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
pExtiConfig->GPIOSel = 0x00U;
}
/* 3] Get D3 Pend Clear source */
if ((pExtiConfig->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)
{
regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset));
if(((*regaddr) & linepos) == 0UL)
{
/* if PMR unset, then no pend clear source is used */
pExtiConfig->PendClearSource = EXTI_D3_PENDCLR_SRC_NONE;
}
else
{
/* if wakeup target is any and PMR set, the read pend clear source from D3PCRxL/H */
if(linepos < 16UL)
{
regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset));
pcrlinepos = 1UL << linepos;
}
else
{
regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset));
pcrlinepos = 1UL << (linepos - 16UL);
}
pExtiConfig->PendClearSource = 1UL + ((*regaddr & (pcrlinepos * pcrlinepos * 3UL)) / (pcrlinepos * pcrlinepos));
}
}
else
{
/* if line wakeup target is not any, then no pend clear source is used */
pExtiConfig->PendClearSource = EXTI_D3_PENDCLR_SRC_NONE;
}
return HAL_OK;
}
/**
* @brief Clear whole configuration of a dedicated Exti line.
* @param hexti Exti handle.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
uint32_t pcrlinepos;
/* Check null pointer */
if (hexti == NULL)
{
return HAL_ERROR;
}
/* Check the parameter */
assert_param(IS_EXTI_LINE(hexti->Line));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (hexti->Line & EXTI_PIN_MASK);
maskline = (1UL << linepos);
/* 1] Clear interrupt mode */
regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
/* 2] Clear event mode */
regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
#if defined (DUAL_CORE)
/* 1] Clear CM4 interrupt mode */
regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
/* 2] Clear CM4 event mode */
regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
#endif /* DUAL_CORE */
/* 3] Clear triggers in case of configurable lines */
if ((hexti->Line & EXTI_CONFIG) != 0x00U)
{
regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
regval = (*regaddr & ~maskline);
*regaddr = regval;
/* Get Gpio port selection for gpio lines */
if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
{
assert_param(IS_EXTI_GPIO_PIN(linepos));
regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL];
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03UL)));
SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL] = regval;
}
}
/* 4] Clear D3 Config lines */
if ((hexti->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)
{
regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset));
*regaddr = (*regaddr & ~maskline);
if(linepos < 16UL)
{
regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset));
pcrlinepos = 1UL << linepos;
}
else
{
regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset));
pcrlinepos = 1UL << (linepos - 16UL);
}
/*Clear D3 PendClear source */
*regaddr &= (~(pcrlinepos * pcrlinepos * 3UL));
}
return HAL_OK;
}
/**
* @brief Register callback for a dedicated Exti line.
* @param hexti Exti handle.
* @param CallbackID User callback identifier.
* This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
* @param pPendingCbfn function pointer to be stored as callback.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
{
HAL_StatusTypeDef status = HAL_OK;
/* Check null pointer */
if (hexti == NULL)
{
return HAL_ERROR;
}
switch (CallbackID)
{
case HAL_EXTI_COMMON_CB_ID:
hexti->PendingCallback = pPendingCbfn;
break;
default:
status = HAL_ERROR;
break;
}
return status;
}
/**
* @brief Store line number as handle private field.
* @param hexti Exti handle.
* @param ExtiLine Exti line number.
* This parameter can be from 0 to @ref EXTI_LINE_NB.
* @retval HAL Status.
*/
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
{
/* Check the parameters */
assert_param(IS_EXTI_LINE(ExtiLine));
/* Check null pointer */
if (hexti == NULL)
{
return HAL_ERROR;
}
else
{
/* Store line number as handle private field */
hexti->Line = ExtiLine;
return HAL_OK;
}
}
/**
* @}
*/
/** @addtogroup EXTI_Exported_Functions_Group2
* @brief EXTI IO functions.
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Handle EXTI interrupt request.
* @param hexti Exti handle.
* @retval none.
*/
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t maskline;
uint32_t offset;
/* Compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
maskline = (1UL << (hexti->Line & EXTI_PIN_MASK));
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
/* Get pending register address */
regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset));
}
else /* Cortex-M4*/
{
/* Get pending register address */
regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset));
}
#else
regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset));
#endif /* DUAL_CORE */
/* Get pending bit */
regval = (*regaddr & maskline);
if (regval != 0x00U)
{
/* Clear pending bit */
*regaddr = maskline;
/* Call callback */
if (hexti->PendingCallback != NULL)
{
hexti->PendingCallback();
}
}
}
/**
* @brief Get interrupt pending bit of a dedicated line.
* @param hexti Exti handle.
* @param Edge Specify which pending edge as to be checked.
* This parameter can be one of the following values:
* @arg @ref EXTI_TRIGGER_RISING_FALLING
* This parameter is kept for compatibility with other series.
* @retval 1 if interrupt is pending else 0.
*/
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
{
__IO uint32_t *regaddr;
uint32_t regval;
uint32_t linepos;
uint32_t maskline;
uint32_t offset;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
assert_param(IS_EXTI_PENDING_EDGE(Edge));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
linepos = (hexti->Line & EXTI_PIN_MASK);
maskline = (1UL << linepos);
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
/* Get pending register address */
regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset));
}
else /* Cortex-M4 */
{
/* Get pending register address */
regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset));
}
#else
regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset));
#endif /* DUAL_CORE */
/* return 1 if bit is set else 0 */
regval = ((*regaddr & maskline) >> linepos);
return regval;
}
/**
* @brief Clear interrupt pending bit of a dedicated line.
* @param hexti Exti handle.
* @param Edge Specify which pending edge as to be clear.
* This parameter can be one of the following values:
* @arg @ref EXTI_TRIGGER_RISING_FALLING
* This parameter is kept for compatibility with other series.
* @retval None.
*/
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
{
__IO uint32_t *regaddr;
uint32_t maskline;
uint32_t offset;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
assert_param(IS_EXTI_PENDING_EDGE(Edge));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
maskline = (1UL << (hexti->Line & EXTI_PIN_MASK));
#if defined(DUAL_CORE)
if (HAL_GetCurrentCPUID() == CM7_CPUID)
{
/* Get pending register address */
regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset));
}
else /* Cortex-M4 */
{
/* Get pending register address */
regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset));
}
#else
regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset));
#endif /* DUAL_CORE */
/* Clear Pending bit */
*regaddr = maskline;
}
/**
* @brief Generate a software interrupt for a dedicated line.
* @param hexti Exti handle.
* @retval None.
*/
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
{
__IO uint32_t *regaddr;
uint32_t maskline;
uint32_t offset;
/* Check parameters */
assert_param(IS_EXTI_LINE(hexti->Line));
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
/* compute line register offset and line mask */
offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
maskline = (1UL << (hexti->Line & EXTI_PIN_MASK));
regaddr = (__IO uint32_t *)(&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset));
*regaddr = maskline;
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_EXTI_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1177
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c Normal file
View File

File diff suppressed because it is too large Load Diff

1863
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c Normal file
View File

File diff suppressed because it is too large Load Diff

560
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c Normal file
View File

@@ -0,0 +1,560 @@
/**
******************************************************************************
* @file stm32h7xx_hal_gpio.c
* @author MCD Application Team
* @brief GPIO HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the General Purpose Input/Output (GPIO) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
*
@verbatim
==============================================================================
##### GPIO Peripheral features #####
==============================================================================
[..]
(+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
configured by software in several modes:
(++) Input mode
(++) Analog mode
(++) Output mode
(++) Alternate function mode
(++) External interrupt/event lines
(+) During and just after reset, the alternate functions and external interrupt
lines are not active and the I/O ports are configured in input floating mode.
(+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
activated or not.
(+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
type and the IO speed can be selected depending on the VDD value.
(+) The microcontroller IO pins are connected to onboard peripherals/modules through a
multiplexer that allows only one peripheral alternate function (AF) connected
to an IO pin at a time. In this way, there can be no conflict between peripherals
sharing the same IO pin.
(+) All ports have external interrupt/event capability. To use external interrupt
lines, the port must be configured in input mode. All available GPIO pins are
connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
The external interrupt/event controller consists of up to 23 edge detectors
(16 lines are connected to GPIO) for generating event/interrupt requests (each
input line can be independently configured to select the type (interrupt or event)
and the corresponding trigger event (rising or falling or both). Each line can
also be masked independently.
##### How to use this driver #####
==============================================================================
[..]
(#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
(#) Configure the GPIO pin(s) using HAL_GPIO_Init().
(++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
(++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
structure.
(++) In case of Output or alternate function mode selection: the speed is
configured through "Speed" member from GPIO_InitTypeDef structure.
(++) In alternate mode is selection, the alternate function connected to the IO
is configured through "Alternate" member from GPIO_InitTypeDef structure.
(++) Analog mode is required when a pin is to be used as ADC channel
or DAC output.
(++) In case of external interrupt/event selection the "Mode" member from
GPIO_InitTypeDef structure select the type (interrupt or event) and
the corresponding trigger event (rising or falling or both).
(#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
HAL_NVIC_EnableIRQ().
(#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
(#) To set/reset the level of a pin configured in output mode use
HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
(#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
(#) During and just after reset, the alternate functions are not
active and the GPIO pins are configured in input floating mode (except JTAG
pins).
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
(PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
priority over the GPIO function.
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
The HSE has priority over the GPIO function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup GPIO GPIO
* @brief GPIO HAL module driver
* @{
*/
#ifdef HAL_GPIO_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private defines ------------------------------------------------------------*/
/** @addtogroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
#define GPIO_MODE (0x00000003U)
#define ANALOG_MODE (0x00000008U)
#define EXTI_MODE (0x10000000U)
#define GPIO_MODE_IT (0x00010000U)
#define GPIO_MODE_EVT (0x00020000U)
#define RISING_EDGE (0x00100000U)
#define FALLING_EDGE (0x00200000U)
#define GPIO_OUTPUT_TYPE (0x00000010U)
#if defined(DUAL_CORE)
#define EXTI_CPU1 (0x01000000U)
#define EXTI_CPU2 (0x02000000U)
#endif /*DUAL_CORE*/
#define GPIO_NUMBER (16U)
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
* @{
*/
/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..]
This section provides functions allowing to initialize and de-initialize the GPIOs
to be ready for use.
@endverbatim
* @{
*/
/**
* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral.
* @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
* the configuration information for the specified GPIO peripheral.
* @retval None
*/
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
{
uint32_t position = 0x00U;
uint32_t iocurrent;
uint32_t temp;
EXTI_Core_TypeDef *EXTI_CurrentCPU;
#if defined(DUAL_CORE) && defined(CORE_CM4)
EXTI_CurrentCPU = EXTI_D2; /* EXTI for CM4 CPU */
#else
EXTI_CurrentCPU = EXTI_D1; /* EXTI for CM7 CPU */
#endif
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
/* Configure the port pins */
while (((GPIO_Init->Pin) >> position) != 0x00U)
{
/* Get current io position */
iocurrent = (GPIO_Init->Pin) & (1UL << position);
if (iocurrent != 0x00U)
{
/*--------------------- GPIO Mode Configuration ------------------------*/
/* In case of Output or Alternate function mode selection */
if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
(GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Speed parameter */
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
/* Configure the IO Speed */
temp = GPIOx->OSPEEDR;
temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U));
temp |= (GPIO_Init->Speed << (position * 2U));
GPIOx->OSPEEDR = temp;
/* Configure the IO Output Type */
temp = GPIOx->OTYPER;
temp &= ~(GPIO_OTYPER_OT0 << position) ;
temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
GPIOx->OTYPER = temp;
}
/* Activate the Pull-up or Pull down resistor for the current IO */
temp = GPIOx->PUPDR;
temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U));
temp |= ((GPIO_Init->Pull) << (position * 2U));
GPIOx->PUPDR = temp;
/* In case of Alternate function mode selection */
if ((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
{
/* Check the Alternate function parameters */
assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
/* Configure Alternate function mapped with the current IO */
temp = GPIOx->AFR[position >> 3U];
temp &= ~(0xFU << ((position & 0x07U) * 4U));
temp |= ((GPIO_Init->Alternate) << ((position & 0x07U) * 4U));
GPIOx->AFR[position >> 3U] = temp;
}
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
temp = GPIOx->MODER;
temp &= ~(GPIO_MODER_MODE0 << (position * 2U));
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
GPIOx->MODER = temp;
/*--------------------- EXTI Mode Configuration ------------------------*/
/* Configure the External Interrupt or event for the current IO */
if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
{
/* Enable SYSCFG Clock */
__HAL_RCC_SYSCFG_CLK_ENABLE();
temp = SYSCFG->EXTICR[position >> 2U];
temp &= ~(0x0FUL << (4U * (position & 0x03U)));
temp |= (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U)));
SYSCFG->EXTICR[position >> 2U] = temp;
/* Clear EXTI line configuration */
temp = EXTI_CurrentCPU->IMR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
{
temp |= iocurrent;
}
EXTI_CurrentCPU->IMR1 = temp;
temp = EXTI_CurrentCPU->EMR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
{
temp |= iocurrent;
}
EXTI_CurrentCPU->EMR1 = temp;
/* Clear Rising Falling edge configuration */
temp = EXTI->RTSR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
{
temp |= iocurrent;
}
EXTI->RTSR1 = temp;
temp = EXTI->FTSR1;
temp &= ~(iocurrent);
if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
{
temp |= iocurrent;
}
EXTI->FTSR1 = temp;
}
}
position++;
}
}
/**
* @brief De-initializes the GPIOx peripheral registers to their default reset values.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
* @retval None
*/
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
{
uint32_t position = 0x00U;
uint32_t iocurrent;
uint32_t tmp;
EXTI_Core_TypeDef *EXTI_CurrentCPU;
#if defined(DUAL_CORE) && defined(CORE_CM4)
EXTI_CurrentCPU = EXTI_D2; /* EXTI for CM4 CPU */
#else
EXTI_CurrentCPU = EXTI_D1; /* EXTI for CM7 CPU */
#endif
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
/* Configure the port pins */
while ((GPIO_Pin >> position) != 0x00U)
{
/* Get current io position */
iocurrent = GPIO_Pin & (1UL << position) ;
if (iocurrent != 0x00U)
{
/*------------------------- EXTI Mode Configuration --------------------*/
/* Clear the External Interrupt or Event for the current IO */
tmp = SYSCFG->EXTICR[position >> 2U];
tmp &= (0x0FUL << (4U * (position & 0x03U)));
if (tmp == (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U))))
{
/* Clear EXTI line configuration for Current CPU */
EXTI_CurrentCPU->IMR1 &= ~(iocurrent);
EXTI_CurrentCPU->EMR1 &= ~(iocurrent);
/* Clear Rising Falling edge configuration */
EXTI->RTSR1 &= ~(iocurrent);
EXTI->FTSR1 &= ~(iocurrent);
tmp = 0x0FUL << (4U * (position & 0x03U));
SYSCFG->EXTICR[position >> 2U] &= ~tmp;
}
/*------------------------- GPIO Mode Configuration --------------------*/
/* Configure IO in Analog Mode */
GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2U));
/* Configure the default Alternate Function in current IO */
GPIOx->AFR[position >> 3U] &= ~(0xFU << ((position & 0x07U) * 4U)) ;
/* Deactivate the Pull-up and Pull-down resistor for the current IO */
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2U));
/* Configure the default value IO Output Type */
GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ;
/* Configure the default value for IO Speed */
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U));
}
position++;
}
}
/**
* @}
*/
/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
* @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Reads the specified input port pin.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_PIN_x where x can be (0..15).
* @retval The input port pin value.
*/
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
{
GPIO_PinState bitstatus;
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
if ((GPIOx->IDR & GPIO_Pin) != 0x00U)
{
bitstatus = GPIO_PIN_SET;
}
else
{
bitstatus = GPIO_PIN_RESET;
}
return bitstatus;
}
/**
* @brief Sets or clears the selected data port bit.
*
* @note This function uses GPIOx_BSRR register to allow atomic read/modify
* accesses. In this way, there is no risk of an IRQ occurring between
* the read and the modify access.
*
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
* @param PinState: specifies the value to be written to the selected bit.
* This parameter can be one of the GPIO_PinState enum values:
* @arg GPIO_PIN_RESET: to clear the port pin
* @arg GPIO_PIN_SET: to set the port pin
* @retval None
*/
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
{
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_PIN_ACTION(PinState));
if (PinState != GPIO_PIN_RESET)
{
GPIOx->BSRR = GPIO_Pin;
}
else
{
GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER;
}
}
/**
* @brief Toggles the specified GPIO pins.
* @param GPIOx: Where x can be (A..K) to select the GPIO peripheral.
* @param GPIO_Pin: Specifies the pins to be toggled.
* @retval None
*/
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
if ((GPIOx->ODR & GPIO_Pin) == GPIO_Pin)
{
GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER;
}
else
{
GPIOx->BSRR = GPIO_Pin;
}
}
/**
* @brief Locks GPIO Pins configuration registers.
* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
* @note The configuration of the locked GPIO pins can no longer be modified
* until the next reset.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32H7 family
* @param GPIO_Pin: specifies the port bit to be locked.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
* @retval None
*/
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
{
__IO uint32_t tmp = GPIO_LCKR_LCKK;
/* Check the parameters */
assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
/* Apply lock key write sequence */
tmp |= GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
GPIOx->LCKR = GPIO_Pin;
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
GPIOx->LCKR = tmp;
/* Read LCKK register. This read is mandatory to complete key lock sequence*/
tmp = GPIOx->LCKR;
/* read again in order to confirm lock is active */
if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00U)
{
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Handle EXTI interrupt request.
* @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line.
* @retval None
*/
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
{
#if defined(DUAL_CORE) && defined(CORE_CM4)
if (__HAL_GPIO_EXTID2_GET_IT(GPIO_Pin) != 0x00U)
{
__HAL_GPIO_EXTID2_CLEAR_IT(GPIO_Pin);
HAL_GPIO_EXTI_Callback(GPIO_Pin);
}
#else
/* EXTI line interrupt detected */
if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00U)
{
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
HAL_GPIO_EXTI_Callback(GPIO_Pin);
}
#endif
}
/**
* @brief EXTI line detection callback.
* @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line.
* @retval None
*/
__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(GPIO_Pin);
/* NOTE: This function Should not be modified, when the callback is needed,
the HAL_GPIO_EXTI_Callback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_GPIO_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

449
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c Normal file
View File

@@ -0,0 +1,449 @@
/**
******************************************************************************
* @file stm32h7xx_hal_hsem.c
* @author MCD Application Team
* @brief HSEM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the semaphore peripheral:
* + Semaphore Take function (2-Step Procedure) , non blocking
* + Semaphore FastTake function (1-Step Procedure) , non blocking
* + Semaphore Status check
* + Semaphore Clear Key Set and Get
* + Release and release all functions
* + Semaphore notification enabling and disabling and callnack functions
* + IRQ handler management
*
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#)Take a semaphore In 2-Step mode Using function HAL_HSEM_Take. This function takes as parameters :
(++) the semaphore ID from 0 to 31
(++) the process ID from 0 to 255
(#) Fast Take semaphore In 1-Step mode Using function HAL_HSEM_FastTake. This function takes as parameter :
(++) the semaphore ID from 0_ID to 31. Note that the process ID value is implicitly assumed as zero
(#) Check if a semaphore is Taken using function HAL_HSEM_IsSemTaken. This function takes as parameter :
(++) the semaphore ID from 0_ID to 31
(++) It returns 1 if the given semaphore is taken otherwise (Free) zero
(#)Release a semaphore using function with HAL_HSEM_Release. This function takes as parameters :
(++) the semaphore ID from 0 to 31
(++) the process ID from 0 to 255:
(++) Note: If ProcessID and MasterID match, semaphore is freed, and an interrupt
may be generated when enabled (notification activated). If ProcessID or MasterID does not match,
semaphore remains taken (locked)
(#)Release all semaphores at once taken by a given Master using function HAL_HSEM_Release_All
This function takes as parameters :
(++) the Release Key (value from 0 to 0xFFFF) can be Set or Get respectively by
HAL_HSEM_SetClearKey() or HAL_HSEM_GetClearKey functions
(++) the Master ID:
(++) Note: If the Key and MasterID match, all semaphores taken by the given CPU that corresponds
to MasterID will be freed, and an interrupt may be generated when enabled (notification activated). If the
Key or the MasterID doesn't match, semaphores remains taken (locked)
(#)Semaphores Release all key functions:
(++) HAL_HSEM_SetClearKey() to set semaphore release all Key
(++) HAL_HSEM_GetClearKey() to get release all Key
(#)Semaphores notification functions :
(++) HAL_HSEM_ActivateNotification to activate a notification callback on
a given semaphores Mask (bitfield). When one or more semaphores defined by the mask are released
the callback HAL_HSEM_FreeCallback will be asserted giving as parameters a mask of the released
semaphores (bitfield).
(++) HAL_HSEM_DeactivateNotification to deactivate the notification of a given semaphores Mask (bitfield).
(++) See the description of the macro __HAL_HSEM_SEMID_TO_MASK to check how to calculate a semaphore mask
Used by the notification functions
*** HSEM HAL driver macros list ***
=============================================
[..] Below the list of most used macros in HSEM HAL driver.
(+) __HAL_HSEM_SEMID_TO_MASK: Helper macro to convert a Semaphore ID to a Mask.
[..] Example of use :
[..] mask = __HAL_HSEM_SEMID_TO_MASK(8) | __HAL_HSEM_SEMID_TO_MASK(21) | __HAL_HSEM_SEMID_TO_MASK(25).
[..] All next macros take as parameter a semaphore Mask (bitfiled) that can be constructed using __HAL_HSEM_SEMID_TO_MASK as the above example.
(+) __HAL_HSEM_ENABLE_IT: Enable the specified semaphores Mask interrupts.
(+) __HAL_HSEM_DISABLE_IT: Disable the specified semaphores Mask interrupts.
(+) __HAL_HSEM_GET_IT: Checks whether the specified semaphore interrupt has occurred or not.
(+) __HAL_HSEM_GET_FLAG: Get the semaphores status release flags.
(+) __HAL_HSEM_CLEAR_FLAG: Clear the semaphores status release flags.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup HSEM HSEM
* @brief HSEM HAL module driver
* @{
*/
#ifdef HAL_HSEM_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#if defined(DUAL_CORE)
/** @defgroup HSEM_Private_Constants HSEM Private Constants
* @{
*/
#ifndef HSEM_R_MASTERID
#define HSEM_R_MASTERID HSEM_R_COREID
#endif
#ifndef HSEM_RLR_MASTERID
#define HSEM_RLR_MASTERID HSEM_RLR_COREID
#endif
#ifndef HSEM_CR_MASTERID
#define HSEM_CR_MASTERID HSEM_CR_COREID
#endif
/**
* @}
*/
#endif /* DUAL_CORE */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup HSEM_Exported_Functions HSEM Exported Functions
* @{
*/
/** @defgroup HSEM_Exported_Functions_Group1 Take and Release functions
* @brief HSEM Take and Release functions
*
@verbatim
==============================================================================
##### HSEM Take and Release functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Take a semaphore with 2 Step method
(+) Fast Take a semaphore with 1 Step method
(+) Check semaphore state Taken or not
(+) Release a semaphore
(+) Release all semaphore at once
@endverbatim
* @{
*/
/**
* @brief Take a semaphore in 2 Step mode.
* @param SemID: semaphore ID from 0 to 31
* @param ProcessID: Process ID from 0 to 255
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID)
{
/* Check the parameters */
assert_param(IS_HSEM_SEMID(SemID));
assert_param(IS_HSEM_PROCESSID(ProcessID));
#if USE_MULTI_CORE_SHARED_CODE != 0U
/* First step write R register with MasterID, processID and take bit=1*/
HSEM->R[SemID] = ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK);
/* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */
if (HSEM->R[SemID] == ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK))
{
/*take success when MasterID and ProcessID match and take bit set*/
return HAL_OK;
}
#else
/* First step write R register with MasterID, processID and take bit=1*/
HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK);
/* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */
if (HSEM->R[SemID] == (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK))
{
/*take success when MasterID and ProcessID match and take bit set*/
return HAL_OK;
}
#endif
/* Semaphore take fails*/
return HAL_ERROR;
}
/**
* @brief Fast Take a semaphore with 1 Step mode.
* @param SemID: semaphore ID from 0 to 31
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID)
{
/* Check the parameters */
assert_param(IS_HSEM_SEMID(SemID));
#if USE_MULTI_CORE_SHARED_CODE != 0U
/* Read the RLR register to take the semaphore */
if (HSEM->RLR[SemID] == (((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_RLR_MASTERID) | HSEM_RLR_LOCK))
{
/*take success when MasterID match and take bit set*/
return HAL_OK;
}
#else
/* Read the RLR register to take the semaphore */
if (HSEM->RLR[SemID] == (HSEM_CR_COREID_CURRENT | HSEM_RLR_LOCK))
{
/*take success when MasterID match and take bit set*/
return HAL_OK;
}
#endif
/* Semaphore take fails */
return HAL_ERROR;
}
/**
* @brief Check semaphore state Taken or not.
* @param SemID: semaphore ID
* @retval HAL HSEM state
*/
uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID)
{
return (((HSEM->R[SemID] & HSEM_R_LOCK) != 0U) ? 1UL : 0UL);
}
/**
* @brief Release a semaphore.
* @param SemID: semaphore ID from 0 to 31
* @param ProcessID: Process ID from 0 to 255
* @retval None
*/
void HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID)
{
/* Check the parameters */
assert_param(IS_HSEM_SEMID(SemID));
assert_param(IS_HSEM_PROCESSID(ProcessID));
/* Clear the semaphore by writing to the R register : the MasterID , the processID and take bit = 0 */
#if USE_MULTI_CORE_SHARED_CODE != 0U
HSEM->R[SemID] = (ProcessID | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID));
#else
HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT);
#endif
}
/**
* @brief Release All semaphore used by a given Master .
* @param Key: Semaphore Key , value from 0 to 0xFFFF
* @param CoreID: CoreID of the CPU that is using semaphores to be released
* @retval None
*/
void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID)
{
assert_param(IS_HSEM_KEY(Key));
assert_param(IS_HSEM_COREID(CoreID));
HSEM->CR = ((Key << HSEM_CR_KEY_Pos) | (CoreID << HSEM_CR_COREID_Pos));
}
/**
* @}
*/
/** @defgroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions
* @brief HSEM Set and Get Key functions.
*
@verbatim
==============================================================================
##### HSEM Set and Get Key functions #####
==============================================================================
[..] This section provides functions allowing to:
(+) Set semaphore Key
(+) Get semaphore Key
@endverbatim
* @{
*/
/**
* @brief Set semaphore Key .
* @param Key: Semaphore Key , value from 0 to 0xFFFF
* @retval None
*/
void HAL_HSEM_SetClearKey(uint32_t Key)
{
assert_param(IS_HSEM_KEY(Key));
MODIFY_REG(HSEM->KEYR, HSEM_KEYR_KEY, (Key << HSEM_KEYR_KEY_Pos));
}
/**
* @brief Get semaphore Key .
* @retval Semaphore Key , value from 0 to 0xFFFF
*/
uint32_t HAL_HSEM_GetClearKey(void)
{
return (HSEM->KEYR >> HSEM_KEYR_KEY_Pos);
}
/**
* @}
*/
/** @defgroup HSEM_Exported_Functions_Group3 HSEM IRQ handler management
* @brief HSEM Notification functions.
*
@verbatim
==============================================================================
##### HSEM IRQ handler management and Notification functions #####
==============================================================================
[..] This section provides HSEM IRQ handler and Notification function.
@endverbatim
* @{
*/
/**
* @brief Activate Semaphore release Notification for a given Semaphores Mask .
* @param SemMask: Mask of Released semaphores
* @retval Semaphore Key
*/
void HAL_HSEM_ActivateNotification(uint32_t SemMask)
{
#if USE_MULTI_CORE_SHARED_CODE != 0U
/*enable the semaphore mask interrupts */
if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID)
{
/*Use interrupt line 0 for CPU1 Master */
HSEM->C1IER |= SemMask;
}
else /* HSEM_CPU2_COREID */
{
/*Use interrupt line 1 for CPU2 Master*/
HSEM->C2IER |= SemMask;
}
#else
HSEM_COMMON->IER |= SemMask;
#endif
}
/**
* @brief Deactivate Semaphore release Notification for a given Semaphores Mask .
* @param SemMask: Mask of Released semaphores
* @retval Semaphore Key
*/
void HAL_HSEM_DeactivateNotification(uint32_t SemMask)
{
#if USE_MULTI_CORE_SHARED_CODE != 0U
/*enable the semaphore mask interrupts */
if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID)
{
/*Use interrupt line 0 for CPU1 Master */
HSEM->C1IER &= ~SemMask;
}
else /* HSEM_CPU2_COREID */
{
/*Use interrupt line 1 for CPU2 Master*/
HSEM->C2IER &= ~SemMask;
}
#else
HSEM_COMMON->IER &= ~SemMask;
#endif
}
/**
* @brief This function handles HSEM interrupt request
* @retval None
*/
void HAL_HSEM_IRQHandler(void)
{
uint32_t statusreg;
#if USE_MULTI_CORE_SHARED_CODE != 0U
if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID)
{
/* Get the list of masked freed semaphores*/
statusreg = HSEM->C1MISR; /*Use interrupt line 0 for CPU1 Master*/
/*Disable Interrupts*/
HSEM->C1IER &= ~((uint32_t)statusreg);
/*Clear Flags*/
HSEM->C1ICR = ((uint32_t)statusreg);
}
else /* HSEM_CPU2_COREID */
{
/* Get the list of masked freed semaphores*/
statusreg = HSEM->C2MISR;/*Use interrupt line 1 for CPU2 Master*/
/*Disable Interrupts*/
HSEM->C2IER &= ~((uint32_t)statusreg);
/*Clear Flags*/
HSEM->C2ICR = ((uint32_t)statusreg);
}
#else
/* Get the list of masked freed semaphores*/
statusreg = HSEM_COMMON->MISR;
/*Disable Interrupts*/
HSEM_COMMON->IER &= ~((uint32_t)statusreg);
/*Clear Flags*/
HSEM_COMMON->ICR = ((uint32_t)statusreg);
#endif
/* Call FreeCallback */
HAL_HSEM_FreeCallback(statusreg);
}
/**
* @brief Semaphore Released Callback.
* @param SemMask: Mask of Released semaphores
* @retval None
*/
__weak void HAL_HSEM_FreeCallback(uint32_t SemMask)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(SemMask);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_HSEM_FreeCallback can be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_HSEM_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

6634
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c Normal file
View File

File diff suppressed because it is too large Load Diff

343
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c Normal file
View File

@@ -0,0 +1,343 @@
/**
******************************************************************************
* @file stm32h7xx_hal_i2c_ex.c
* @author MCD Application Team
* @brief I2C Extended HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of I2C Extended peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### I2C peripheral Extended features #####
==============================================================================
[..] Comparing to other previous devices, the I2C interface for STM32H7xx
devices contains the following additional features
(+) Possibility to disable or enable Analog Noise Filter
(+) Use of a configured Digital Noise Filter
(+) Disable or enable wakeup from Stop mode(s)
(+) Disable or enable Fast Mode Plus
##### How to use this driver #####
==============================================================================
[..] This driver provides functions to configure Noise Filter and Wake Up Feature
(#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
(#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
(#) Configure the enable or disable of I2C Wake Up Mode using the functions :
(++) HAL_I2CEx_EnableWakeUp()
(++) HAL_I2CEx_DisableWakeUp()
(#) Configure the enable or disable of fast mode plus driving capability using the functions :
(++) HAL_I2CEx_EnableFastModePlus()
(++) HAL_I2CEx_DisableFastModePlus()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup I2CEx I2CEx
* @brief I2C Extended HAL module driver
* @{
*/
#ifdef HAL_I2C_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
* @{
*/
/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure Noise Filters
(+) Configure Wake Up Feature
(+) Configure Fast Mode Plus
@endverbatim
* @{
*/
/**
* @brief Configure I2C Analog noise filter.
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param AnalogFilter New state of the Analog filter.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
if (hi2c->State == HAL_I2C_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Reset I2Cx ANOFF bit */
hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
/* Set analog filter bit*/
hi2c->Instance->CR1 |= AnalogFilter;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Configure I2C Digital noise filter.
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
{
uint32_t tmpreg;
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
if (hi2c->State == HAL_I2C_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Get the old register value */
tmpreg = hi2c->Instance->CR1;
/* Reset I2Cx DNF bits [11:8] */
tmpreg &= ~(I2C_CR1_DNF);
/* Set I2Cx DNF coefficient */
tmpreg |= DigitalFilter << 8U;
/* Store the new register value */
hi2c->Instance->CR1 = tmpreg;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Enable I2C wakeup from Stop mode(s).
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
{
/* Check the parameters */
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
if (hi2c->State == HAL_I2C_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Enable wakeup from stop mode */
hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Disable I2C wakeup from Stop mode(s).
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
{
/* Check the parameters */
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
if (hi2c->State == HAL_I2C_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Enable wakeup from stop mode */
hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Enable the I2C fast mode plus driving capability.
* @param ConfigFastModePlus Selects the pin.
* This parameter can be one of the @ref I2CEx_FastModePlus values
* @note For I2C1, fast mode plus driving capability can be enabled on all selected
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
* on each one of the following pins PB6, PB7, PB8 and PB9.
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
* can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
* @note For all I2C2 pins fast mode plus driving capability can be enabled
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
* @note For all I2C3 pins fast mode plus driving capability can be enabled
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
* @note For all I2C4 pins fast mode plus driving capability can be enabled
* only by using I2C_FASTMODEPLUS_I2C4 parameter.
* @note For all I2C5 pins fast mode plus driving capability can be enabled
* only by using I2C_FASTMODEPLUS_I2C5 parameter.
* @retval None
*/
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
{
/* Check the parameter */
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
/* Enable SYSCFG clock */
__HAL_RCC_SYSCFG_CLK_ENABLE();
/* Enable fast mode plus driving capability for selected pin */
SET_BIT(SYSCFG->PMCR, (uint32_t)ConfigFastModePlus);
}
/**
* @brief Disable the I2C fast mode plus driving capability.
* @param ConfigFastModePlus Selects the pin.
* This parameter can be one of the @ref I2CEx_FastModePlus values
* @note For I2C1, fast mode plus driving capability can be disabled on all selected
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
* on each one of the following pins PB6, PB7, PB8 and PB9.
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
* can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
* @note For all I2C2 pins fast mode plus driving capability can be disabled
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
* @note For all I2C3 pins fast mode plus driving capability can be disabled
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
* @note For all I2C4 pins fast mode plus driving capability can be disabled
* only by using I2C_FASTMODEPLUS_I2C4 parameter.
* @note For all I2C5 pins fast mode plus driving capability can be disabled
* only by using I2C_FASTMODEPLUS_I2C5 parameter.
* @retval None
*/
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
{
/* Check the parameter */
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
/* Enable SYSCFG clock */
__HAL_RCC_SYSCFG_CLK_ENABLE();
/* Disable fast mode plus driving capability for selected pin */
CLEAR_BIT(SYSCFG->PMCR, (uint32_t)ConfigFastModePlus);
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_I2C_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1901
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c Normal file
View File

File diff suppressed because it is too large Load Diff

2201
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd.c Normal file
View File

File diff suppressed because it is too large Load Diff

348
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd_ex.c Normal file
View File

@@ -0,0 +1,348 @@
/**
******************************************************************************
* @file stm32h7xx_hal_pcd_ex.c
* @author MCD Application Team
* @brief PCD Extended HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the USB Peripheral Controller:
* + Extended features functions
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup PCDEx PCDEx
* @brief PCD Extended HAL module driver
* @{
*/
#ifdef HAL_PCD_MODULE_ENABLED
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
* @{
*/
/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
* @brief PCDEx control functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Update FIFO configuration
@endverbatim
* @{
*/
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/**
* @brief Set Tx FIFO
* @param hpcd PCD handle
* @param fifo The number of Tx fifo
* @param size Fifo size
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
{
uint8_t i;
uint32_t Tx_Offset;
/* TXn min size = 16 words. (n : Transmit FIFO index)
When a TxFIFO is not used, the Configuration should be as follows:
case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
--> Txm can use the space allocated for Txn.
case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
--> Txn should be configured with the minimum space of 16 words
The FIFO is used optimally when used TxFIFOs are allocated in the top
of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
Tx_Offset = hpcd->Instance->GRXFSIZ;
if (fifo == 0U)
{
hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset;
}
else
{
Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
for (i = 0U; i < (fifo - 1U); i++)
{
Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
}
/* Multiply Tx_Size by 2 to get higher performance */
hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset;
}
return HAL_OK;
}
/**
* @brief Set Rx FIFO
* @param hpcd PCD handle
* @param size Size of Rx fifo
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
{
hpcd->Instance->GRXFSIZ = size;
return HAL_OK;
}
/**
* @brief Activate LPM feature.
* @param hpcd PCD handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
hpcd->lpm_active = 1U;
hpcd->LPM_State = LPM_L0;
USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
return HAL_OK;
}
/**
* @brief Deactivate LPM feature.
* @param hpcd PCD handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
hpcd->lpm_active = 0U;
USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
return HAL_OK;
}
/**
* @brief Handle BatteryCharging Process.
* @param hpcd PCD handle
* @retval HAL status
*/
void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
uint32_t tickstart = HAL_GetTick();
/* Enable DCD : Data Contact Detect */
USBx->GCCFG |= USB_OTG_GCCFG_DCDEN;
/* Wait Detect flag or a timeout is happen*/
while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0U)
{
/* Check for the Timeout */
if ((HAL_GetTick() - tickstart) > 1000U)
{
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->BCDCallback(hpcd, PCD_BCD_ERROR);
#else
HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
return;
}
}
/* Right response got */
HAL_Delay(200U);
/* Check Detect flag*/
if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET)
{
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION);
#else
HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
/*Primary detection: checks if connected to Standard Downstream Port
(without charging capability) */
USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN;
HAL_Delay(50U);
USBx->GCCFG |= USB_OTG_GCCFG_PDEN;
HAL_Delay(50U);
if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U)
{
/* Case of Standard Downstream Port */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
#else
HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
else
{
/* start secondary detection to check connection to Charging Downstream
Port or Dedicated Charging Port */
USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN;
HAL_Delay(50U);
USBx->GCCFG |= USB_OTG_GCCFG_SDEN;
HAL_Delay(50U);
if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET)
{
/* case Dedicated Charging Port */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
#else
HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
else
{
/* case Charging Downstream Port */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
#else
HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
}
/* Battery Charging capability discovery finished */
(void)HAL_PCDEx_DeActivateBCD(hpcd);
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
#else
HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
/**
* @brief Activate BatteryCharging feature.
* @param hpcd PCD handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN);
USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN);
/* Power Down USB tranceiver */
USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
/* Enable Battery charging */
USBx->GCCFG |= USB_OTG_GCCFG_BCDEN;
hpcd->battery_charging_active = 1U;
return HAL_OK;
}
/**
* @brief Deactivate BatteryCharging feature.
* @param hpcd PCD handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd)
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN);
USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN);
/* Disable Battery charging */
USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN);
hpcd->battery_charging_active = 0U;
return HAL_OK;
}
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/**
* @brief Send LPM message to user layer callback.
* @param hpcd PCD handle
* @param msg LPM message
* @retval HAL status
*/
__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hpcd);
UNUSED(msg);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_PCDEx_LPM_Callback could be implemented in the user file
*/
}
/**
* @brief Send BatteryCharging message to user layer callback.
* @param hpcd PCD handle
* @param msg LPM message
* @retval HAL status
*/
__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hpcd);
UNUSED(msg);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_PCDEx_BCD_Callback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
#endif /* HAL_PCD_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

875
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c Normal file
View File

@@ -0,0 +1,875 @@
/**
******************************************************************************
* @file stm32h7xx_hal_pwr.c
* @author MCD Application Team
* @brief PWR HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Power Controller (PWR) peripheral:
* + Initialization and de-initialization functions.
* + Peripheral Control functions.
* + Interrupt Handling functions.
@verbatim
==============================================================================
##### PWR peripheral overview #####
==============================================================================
[..]
(#) The Power control (PWR) provides an overview of the supply architecture
for the different power domains and of the supply configuration
controller.
In the H7 family, the number of power domains is different between
device lines. This difference is due to characteristics of each device.
(#) Domain architecture overview for the different H7 lines:
(+) Dual core lines are STM32H745, STM32H747, STM32H755 and STM32H757.
These devices have 3 power domains (D1, D2 and D3).
The domain D1 contains a CPU (Cortex-M7), a Flash memory and some
peripherals. The D2 domain contains peripherals and a CPU
(Cortex-M4). The D3 domain contains the system control, I/O logic
and low-power peripherals.
(+) STM32H72x, STM32H73x, STM32H742, STM32H743, STM32H750 and STM32H753
devices have 3 power domains (D1, D2 and D3).
The domain D1 contains a CPU (Cortex-M7), a Flash memory and some
peripherals. The D2 domain contains peripherals. The D3 domains
contains the system control, I/O logic and low-power peripherals.
(+) STM32H7Axxx and STM32H7Bxxx devices have 2 power domains (CD and SRD).
The core domain (CD) contains a CPU (Cortex-M7), a Flash
memory and peripherals. The SmartRun domain contains the system
control, I/O logic and low-power peripherals.
(#) Every entity have low power mode as decribed below :
(#) The CPU low power modes are :
(+) CPU CRUN.
(+) CPU CSLEEP.
(+) CPU CSTOP.
(#) The domain low power modes are :
(+) DRUN.
(+) DSTOP.
(+) DSTANDBY.
(#) The SYSTEM low power modes are :
(+) RUN* : The Run* mode is entered after a POR reset and a wakeup from
Standby. In Run* mode, the performance is limited and the
system supply configuration shall be programmed. The system
enters Run mode only when the ACTVOSRDY bit in PWR control
status register 1 (PWR_CSR1) is set to 1.
(+) RUN.
(+) STOP.
(+) STANDBY.
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#) Power management peripheral is active by default at startup level in
STM32h7xx lines.
(#) Call HAL_PWR_EnableBkUpAccess() and HAL_PWR_DisableBkUpAccess() functions
to enable/disable access to the backup domain (RTC registers, RTC backup
data registers and backup SRAM).
(#) Call HAL_PWR_ConfigPVD() after setting parameters to be configured (event
mode and voltage threshold) in order to set up the Power Voltage Detector,
then use HAL_PWR_EnablePVD() and HAL_PWR_DisablePVD() functions to start
and stop the PVD detection.
(+) PVD level could be one of the following values :
(++) 1V95
(++) 2V1
(++) 2V25
(++) 2V4
(++) 2V55
(++) 2V7
(++) 2V85
(++) External voltage level
(#) Call HAL_PWR_EnableWakeUpPin() and HAL_PWR_DisableWakeUpPin() functions
with the right parameter to configure the wake up pin polarity (Low or
High) and to enable and disable it.
(#) Call HAL_PWR_EnterSLEEPMode() function to enter the current Core in SLEEP
mode. Wake-up from SLEEP mode could be following to an event or an
interrupt according to low power mode intrinsic request called (__WFI()
or __WFE()).
Please ensure to clear all CPU pending events by calling
HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx
in SLEEP mode with __WFE() entry.
(#) Call HAL_PWR_EnterSTOPMode() function to enter the whole system to Stop 0
mode for single core devices. For dual core devices, this API will enter
the domain (containing Cortex-Mx that executing this function) in DSTOP
mode. According to the used parameter, user could select the regulator to
be kept actif in low power mode and wake-up event type.
Please ensure to clear all CPU pending events by calling
HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx
in CSTOP mode with __WFE() entry.
(#) Call HAL_PWR_EnterSTANDBYMode() function to enter the whole system in
STANDBY mode for single core devices. For dual core devices, this API
will enter the domain (containing Cortex-Mx that executing this function)
in DSTANDBY mode.
(#) Call HAL_PWR_EnableSleepOnExit() and HAL_PWR_DisableSleepOnExit() APIs to
enable and disable the Cortex-Mx re-entring in SLEEP mode after an
interruption handling is over.
(#) Call HAL_PWR_EnableSEVOnPend() and HAL_PWR_DisableSEVOnPend() functions
to configure the Cortex-Mx to wake-up after any pending event / interrupt
even if it's disabled or has insufficient priority to cause exception
entry.
(#) Call HAL_PWR_PVD_IRQHandler() function to handle the PWR PVD interrupt
request.
*** PWR HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in PWR HAL driver.
(+) __HAL_PWR_VOLTAGESCALING_CONFIG() : Configure the main internal
regulator output voltage.
(+) __HAL_PWR_GET_FLAG() : Get the PWR pending flags.
(+) __HAL_PWR_CLEAR_FLAG() : Clear the PWR pending flags.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup PWR PWR
* @brief PWR HAL module driver
* @{
*/
#ifdef HAL_PWR_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup PWR_Private_Constants PWR Private Constants
* @{
*/
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
* @{
*/
#if !defined (DUAL_CORE)
#define PVD_MODE_IT (0x00010000U)
#define PVD_MODE_EVT (0x00020000U)
#endif /* !defined (DUAL_CORE) */
#define PVD_RISING_EDGE (0x00000001U)
#define PVD_FALLING_EDGE (0x00000002U)
#define PVD_RISING_FALLING_EDGE (0x00000003U)
/**
* @}
*/
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @defgroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions
* @brief Initialization and De-Initialization functions
*
@verbatim
===============================================================================
##### Initialization and De-Initialization Functions #####
===============================================================================
[..]
This section provides functions allowing to deinitialize power peripheral.
[..]
After system reset, the backup domain (RTC registers, RTC backup data
registers and backup SRAM) is protected against possible unwanted write
accesses.
The HAL_PWR_EnableBkUpAccess() function enables the access to the backup
domain.
The HAL_PWR_DisableBkUpAccess() function disables the access to the backup
domain.
@endverbatim
* @{
*/
/**
* @brief Deinitialize the HAL PWR peripheral registers to their default reset
* values.
* @note This functionality is not available in this product.
* The prototype is kept just to maintain compatibility with other
* products.
* @retval None.
*/
void HAL_PWR_DeInit (void)
{
}
/**
* @brief Enable access to the backup domain (RTC registers, RTC backup data
* registers and backup SRAM).
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
* Backup Domain Access should be kept enabled.
* @retval None.
*/
void HAL_PWR_EnableBkUpAccess (void)
{
/* Enable access to RTC and backup registers */
SET_BIT (PWR->CR1, PWR_CR1_DBP);
}
/**
* @brief Disable access to the backup domain (RTC registers, RTC backup data
* registers and backup SRAM).
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
* Backup Domain Access should be kept enabled.
* @retval None.
*/
void HAL_PWR_DisableBkUpAccess (void)
{
/* Disable access to RTC and backup registers */
CLEAR_BIT (PWR->CR1, PWR_CR1_DBP);
}
/**
* @}
*/
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control Functions
* @brief Power Control functions
*
@verbatim
===============================================================================
##### Peripheral Control Functions #####
===============================================================================
[..]
This section provides functions allowing to control power peripheral.
*** PVD configuration ***
=========================
[..]
(+) The PVD is used to monitor the VDD power supply by comparing it to a
threshold selected by the PVD Level (PLS[7:0] bits in the PWR_CR1
register).
(+) A PVDO flag is available to indicate if VDD is higher or lower
than the PVD threshold. This event is internally connected to the EXTI
line 16 to generate an interrupt if enabled.
It is configurable through __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
(+) The PVD is stopped in STANDBY mode.
*** Wake-up pin configuration ***
=================================
[..]
(+) Wake-up pin is used to wake up the system from STANDBY mode.
The pin pull is configurable through the WKUPEPR register to be in
No-pull, Pull-up and Pull-down.
The pin polarity is configurable through the WKUPEPR register to be
active on rising or falling edges.
(+) There are up to six Wake-up pin in the STM32H7 devices family.
*** Low Power modes configuration ***
=====================================
[..]
The device present 3 principles low-power modes features:
(+) SLEEP mode : Cortex-Mx is stopped and all PWR domains are remaining
active (Powered and Clocked).
(+) STOP mode : Cortex-Mx is stopped, clocks are stopped and the
regulator is running. The Main regulator or the LP
regulator could be selected.
(+) STANDBY mode : All PWR domains enter DSTANDBY mode and the VCORE
supply regulator is powered off.
*** SLEEP mode ***
==================
[..]
(+) Entry:
The SLEEP mode is entered by using the HAL_PWR_EnterSLEEPMode(Regulator,
SLEEPEntry) function.
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction.
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction.
-@@- The Regulator parameter is not used for the STM32H7 family
and is kept as parameter just to maintain compatibility with the
lower power families (STM32L).
(+) Exit:
Any peripheral interrupt acknowledged by the nested vectored interrupt
controller (NVIC) can wake up the device from SLEEP mode.
*** STOP mode ***
=================
[..]
In system STOP mode, all clocks in the 1.2V domain are stopped, the PLL,
the HSI, and the HSE RC oscillators are disabled. Internal SRAM and
register contents are preserved.
The voltage regulator can be configured either in normal or low-power mode.
To minimize the consumption in STOP mode, FLASH can be powered off before
entering the STOP mode using the HAL_PWREx_EnableFlashPowerDown() function.
It can be switched on again by software after exiting the STOP mode using
the HAL_PWREx_DisableFlashPowerDown() function.
(+) Entry:
The STOP mode is entered using the HAL_PWR_EnterSTOPMode(Regulator,
STOPEntry) function with:
(++) Regulator:
(+++) PWR_MAINREGULATOR_ON: Main regulator ON.
(+++) PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON.
(++) STOPEntry:
(+++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction.
(+++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction.
(+) Exit:
Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
*** STANDBY mode ***
====================
[..]
(+)
The system STANDBY mode allows to achieve the lowest power consumption.
It is based on the Cortex-Mx deep SLEEP mode, with the voltage regulator
disabled. The system is consequently powered off. The PLL, the HSI
oscillator and the HSE oscillator are also switched off. SRAM and register
contents are lost except for the RTC registers, RTC backup registers,
backup SRAM and standby circuitry.
[..]
The voltage regulator is OFF.
(++) Entry:
(+++) The STANDBY mode is entered using the HAL_PWR_EnterSTANDBYMode()
function.
(++) Exit:
(+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B),
RTC wakeup, tamper event, time stamp event, external reset in NRST
pin, IWDG reset.
*** Auto-wakeup (AWU) from low-power mode ***
=============================================
[..]
(+) The MCU can be woken up from low-power mode by an RTC Alarm event, an
RTC Wakeup event, a tamper event or a time-stamp event, without
depending on an external interrupt (Auto-wakeup mode).
(+) RTC auto-wakeup (AWU) from the STOP and STANDBY modes
(++) To wake up from the STOP mode with an RTC alarm event, it is
necessary to configure the RTC to generate the RTC alarm using the
HAL_RTC_SetAlarm_IT() function.
(++) To wake up from the STOP mode with an RTC Tamper or time stamp event,
it is necessary to configure the RTC to detect the tamper or time
stamp event using the HAL_RTCEx_SetTimeStamp_IT() or
HAL_RTCEx_SetTamper_IT() functions.
(++) To wake up from the STOP mode with an RTC WakeUp event, it is
necessary to configure the RTC to generate the RTC WakeUp event
using the HAL_RTCEx_SetWakeUpTimer_IT() function.
@endverbatim
* @{
*/
/**
* @brief Configure the event mode and the voltage threshold detected by the
* Programmable Voltage Detector(PVD).
* @param sConfigPVD : Pointer to an PWR_PVDTypeDef structure that contains
* the configuration information for the PVD.
* @note Refer to the electrical characteristics of your device datasheet for
* more details about the voltage threshold corresponding to each
* detection level.
* @note For dual core devices, please ensure to configure the EXTI lines for
* the different Cortex-Mx through PWR_Exported_Macro provided by this
* driver. All combination are allowed: wake up only Cortex-M7, wake up
* only Cortex-M4 or wake up Cortex-M7 and Cortex-M4.
* @retval None.
*/
void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD)
{
/* Check the PVD configuration parameter */
if (sConfigPVD == NULL)
{
return;
}
/* Check the parameters */
assert_param (IS_PWR_PVD_LEVEL (sConfigPVD->PVDLevel));
assert_param (IS_PWR_PVD_MODE (sConfigPVD->Mode));
/* Set PLS[7:5] bits according to PVDLevel value */
MODIFY_REG (PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel);
/* Clear previous config */
#if !defined (DUAL_CORE)
__HAL_PWR_PVD_EXTI_DISABLE_EVENT ();
__HAL_PWR_PVD_EXTI_DISABLE_IT ();
#endif /* !defined (DUAL_CORE) */
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE ();
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE ();
#if !defined (DUAL_CORE)
/* Interrupt mode configuration */
if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
{
__HAL_PWR_PVD_EXTI_ENABLE_IT ();
}
/* Event mode configuration */
if ((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
{
__HAL_PWR_PVD_EXTI_ENABLE_EVENT ();
}
#endif /* !defined (DUAL_CORE) */
/* Rising edge configuration */
if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
{
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE ();
}
/* Falling edge configuration */
if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
{
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE ();
}
}
/**
* @brief Enable the Programmable Voltage Detector (PVD).
* @retval None.
*/
void HAL_PWR_EnablePVD (void)
{
/* Enable the power voltage detector */
SET_BIT (PWR->CR1, PWR_CR1_PVDEN);
}
/**
* @brief Disable the Programmable Voltage Detector (PVD).
* @retval None.
*/
void HAL_PWR_DisablePVD (void)
{
/* Disable the power voltage detector */
CLEAR_BIT (PWR->CR1, PWR_CR1_PVDEN);
}
/**
* @brief Enable the WakeUp PINx functionality.
* @param WakeUpPinPolarity : Specifies which Wake-Up pin to enable.
* This parameter can be one of the following legacy values, which
* sets the default (rising edge):
* @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3,
* PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6.
* or one of the following values where the user can explicitly states
* the enabled pin and the chosen polarity:
* @arg PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW,
* PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW,
* PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW,
* PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW,
* PWR_WAKEUP_PIN5_HIGH, PWR_WAKEUP_PIN5_LOW,
* PWR_WAKEUP_PIN6_HIGH, PWR_WAKEUP_PIN6_LOW.
* @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
* @note The PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, PWR_WAKEUP_PIN5_HIGH
* and PWR_WAKEUP_PIN5_LOW are available only for devices that includes
* GPIOI port.
* @retval None.
*/
void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity)
{
/* Check the parameters */
assert_param (IS_PWR_WAKEUP_PIN (WakeUpPinPolarity));
/*
Enable and Specify the Wake-Up pin polarity and the pull configuration
for the event detection (rising or falling edge).
*/
MODIFY_REG (PWR->WKUPEPR, PWR_EWUP_MASK, WakeUpPinPolarity);
}
/**
* @brief Disable the WakeUp PINx functionality.
* @param WakeUpPinx : Specifies the Power Wake-Up pin to disable.
* This parameter can be one of the following values:
* @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3,
* PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6,
* PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW,
* PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW,
* PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW,
* PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW,
* PWR_WAKEUP_PIN5_HIGH, PWR_WAKEUP_PIN5_LOW,
* PWR_WAKEUP_PIN6_HIGH, PWR_WAKEUP_PIN6_LOW.
* @note The PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, PWR_WAKEUP_PIN5_HIGH
* and PWR_WAKEUP_PIN5_LOW are available only for devices that includes
* GPIOI port.
* @retval None.
*/
void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx)
{
/* Check the parameters */
assert_param (IS_PWR_WAKEUP_PIN (WakeUpPinx));
/* Disable the wake up pin selected */
CLEAR_BIT (PWR->WKUPEPR, (PWR_WKUPEPR_WKUPEN & WakeUpPinx));
}
/**
* @brief Enter the current core in SLEEP mode (CSLEEP).
* @param Regulator : Specifies the regulator state in SLEEP mode.
* This parameter can be one of the following values:
* @arg PWR_MAINREGULATOR_ON : SLEEP mode with regulator ON.
* @arg PWR_LOWPOWERREGULATOR_ON : SLEEP mode with low power
* regulator ON.
* @note This parameter is not used for the STM32H7 family and is kept as
* parameter just to maintain compatibility with the lower power
* families.
* @param SLEEPEntry : Specifies if SLEEP mode is entered with WFI or WFE
* intrinsic instruction.
* This parameter can be one of the following values:
* @arg PWR_SLEEPENTRY_WFI : enter SLEEP mode with WFI instruction.
* @arg PWR_SLEEPENTRY_WFE : enter SLEEP mode with WFE instruction.
* @note Ensure to clear pending events before calling this API through
* HAL_PWREx_ClearPendingEvent() when the SLEEP entry is WFE.
* @retval None.
*/
void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry)
{
/* Check the parameters */
assert_param (IS_PWR_REGULATOR (Regulator));
assert_param (IS_PWR_SLEEP_ENTRY (SLEEPEntry));
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
/* Select SLEEP mode entry */
if (SLEEPEntry == PWR_SLEEPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI ();
}
else
{
/* Request Wait For Event */
__WFE ();
}
}
/**
* @brief Enter STOP mode.
* @note For single core devices, this API will enter the system in STOP mode
* with all domains in DSTOP, if RUN_D3/RUN_SRD bit in CPUCR regiter is
* cleared.
* For dual core devices, this API will enter the domain (containing
* Cortex-Mx that executing this function) in DSTOP mode. If all
* Cortex-Mx domains are in DSTOP and RUN_D3 bit in CPUCR register is
* cleared, all the system will enter in STOP mode.
* @param Regulator : Specifies the regulator state in STOP mode.
* This parameter can be one of the following values:
* @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON.
* @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power
* regulator ON.
* @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE
* intrinsic instruction.
* This parameter can be one of the following values:
* @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction.
* @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction.
* @note In System STOP mode, all I/O pins keep the same state as in Run mode.
* @note When exiting System STOP mode by issuing an interrupt or a wakeup
* event, the HSI RC oscillator is selected as default system wakeup
* clock.
* @note In System STOP mode, when the voltage regulator operates in low
* power mode, an additional startup delay is incurred when the system
* is waking up. By keeping the internal regulator ON during STOP mode,
* the consumption is higher although the startup time is reduced.
* @retval None.
*/
void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry)
{
/* Check the parameters */
assert_param (IS_PWR_REGULATOR (Regulator));
assert_param (IS_PWR_STOP_ENTRY (STOPEntry));
/* Select the regulator state in STOP mode */
MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator);
/* Configure the PWR mode for the different Domains */
#if defined (DUAL_CORE)
/* Check CPU ID */
if (HAL_GetCurrentCPUID () == CM7_CPUID)
{
/* Keep DSTOP mode when Cortex-M7 enters DEEP-SLEEP */
CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3));
}
else
{
/* Keep DSTOP mode when Cortex-M4 enters DEEP-SLEEP */
CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D2 | PWR_CPUCR_PDDS_D3));
}
#else /* Single core devices */
/* Keep DSTOP mode when Cortex-M7 enter in DEEP-SLEEP */
CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3));
#if defined (PWR_CPUCR_PDDS_D2)
/* Keep DSTOP mode when Cortex-M7 enter in DEEP-SLEEP */
CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2);
#endif /* PWR_CPUCR_PDDS_D2 */
#endif /* defined (DUAL_CORE) */
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
/* Ensure that all instructions are done before entering STOP mode */
__DSB ();
__ISB ();
/* Select STOP mode entry */
if (STOPEntry == PWR_STOPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI ();
}
else
{
/* Request Wait For Event */
__WFE ();
}
/* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */
CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
}
/**
* @brief Enter STANDBY mode.
* @note For single core devices, this API will enter the system in STANDBY
* mode with all domains in DSTANDBY, if RUN_D3/RUN_SRD bit in CPUCR
* regiter is cleared.
* For dual core devices, this API will enter the domain (containing
* Cortex-Mx that executing this function) in DSTANDBY mode. If all
* Cortex-Mx domains are in DSTANDBY and RUN_D3 bit in CPUCR register
* is cleared, all the system will enter in STANDBY mode.
* @note The system enters Standby mode only when all domains are in DSTANDBY.
* @note When the System exit STANDBY mode by issuing an interrupt or a
* wakeup event, the HSI RC oscillator is selected as system clock.
* @note It is recommended to disable all regulators before entring STANDBY
* mode for power consumption saving purpose.
* @retval None.
*/
void HAL_PWR_EnterSTANDBYMode (void)
{
/* Configure the PWR mode for the different Domains */
#if defined (DUAL_CORE)
/* Check CPU ID */
if (HAL_GetCurrentCPUID () == CM7_CPUID)
{
/* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */
SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3));
SET_BIT (PWR->CPU2CR, (PWR_CPU2CR_PDDS_D1 | PWR_CPU2CR_PDDS_D3));
}
else
{
/* Enter DSTANDBY mode when Cortex-M4 enters DEEP-SLEEP */
SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D2 | PWR_CPUCR_PDDS_D3));
SET_BIT (PWR->CPU2CR, (PWR_CPU2CR_PDDS_D2 | PWR_CPU2CR_PDDS_D3));
}
#else /* Single core devices */
/* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */
SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3));
#if defined (PWR_CPUCR_PDDS_D2)
/* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */
SET_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2);
#endif /* PWR_CPUCR_PDDS_D2 */
#endif /* defined (DUAL_CORE) */
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
/* Ensure that all instructions are done before entering STOP mode */
__DSB ();
__ISB ();
/* This option is used to ensure that store operations are completed */
#if defined (__CC_ARM)
__force_stores();
#endif /* defined (__CC_ARM) */
/* Request Wait For Interrupt */
__WFI ();
}
/**
* @brief Indicate Sleep-On-Exit feature when returning from Handler mode to
* Thread mode.
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the
* processor re-enters SLEEP mode when an interruption handling is over.
* Setting this bit is useful when the processor is expected to run
* only on interruptions handling.
* @retval None.
*/
void HAL_PWR_EnableSleepOnExit (void)
{
/* Set SLEEPONEXIT bit of Cortex-Mx System Control Register */
SET_BIT (SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk);
}
/**
* @brief Disable Sleep-On-Exit feature when returning from Handler mode to
* Thread mode.
* @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the
* processor re-enters SLEEP mode when an interruption handling is over.
* @retval None
*/
void HAL_PWR_DisableSleepOnExit (void)
{
/* Clear SLEEPONEXIT bit of Cortex-Mx System Control Register */
CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk);
}
/**
* @brief Enable CORTEX SEVONPEND feature.
* @note Sets SEVONPEND bit of SCR register. When this bit is set, any
* pending event / interrupt even if it's disabled or has insufficient
* priority to cause exception entry wakes up the Cortex-Mx.
* @retval None.
*/
void HAL_PWR_EnableSEVOnPend (void)
{
/* Set SEVONPEND bit of Cortex-Mx System Control Register */
SET_BIT (SCB->SCR, SCB_SCR_SEVONPEND_Msk);
}
/**
* @brief Disable CORTEX SEVONPEND feature.
* @note Resets SEVONPEND bit of SCR register. When this bit is reset, only
* enabled pending causes exception entry wakes up the Cortex-Mx.
* @retval None.
*/
void HAL_PWR_DisableSEVOnPend (void)
{
/* Clear SEVONPEND bit of Cortex System Control Register */
CLEAR_BIT (SCB->SCR, SCB_SCR_SEVONPEND_Msk);
}
/**
* @}
*/
/** @defgroup PWR_Exported_Functions_Group3 Interrupt Handling Functions
* @brief Interrupt Handling functions
*
@verbatim
===============================================================================
##### Interrupt Handling Functions #####
===============================================================================
[..]
This section provides functions allowing to handle the PVD pending
interrupts.
@endverbatim
* @{
*/
/**
* @brief This function handles the PWR PVD interrupt request.
* @note This API should be called under the PVD_AVD_IRQHandler().
* @retval None.
*/
void HAL_PWR_PVD_IRQHandler (void)
{
#if defined (DUAL_CORE)
/* Check Cortex-Mx ID */
if (HAL_GetCurrentCPUID () == CM7_CPUID)
{
/* Check PWR EXTI D1 flag */
if(__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U)
{
/* Clear PWR EXTI D1 pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_FLAG ();
/* PWR PVD interrupt user callback */
HAL_PWR_PVDCallback ();
}
}
else
{
/* Check PWR EXTI D2 flag */
if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U)
{
/* Clear PWR EXTI D2 pending bit */
__HAL_PWR_PVD_EXTID2_CLEAR_FLAG ();
/* PWR PVD interrupt user callback */
HAL_PWR_PVDCallback ();
}
}
#else /* Single core devices */
/* PVD EXTI line interrupt detected */
if (__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U)
{
/* Clear PWR EXTI pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_FLAG ();
/* PWR PVD interrupt user callback */
HAL_PWR_PVDCallback ();
}
#endif /* defined (DUAL_CORE) */
}
/**
* @brief PWR PVD interrupt callback.
* @retval None.
*/
__weak void HAL_PWR_PVDCallback (void)
{
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_PWR_PVDCallback can be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_PWR_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2144
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c Normal file
View File

File diff suppressed because it is too large Load Diff

1775
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c Normal file
View File

File diff suppressed because it is too large Load Diff

3488
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c Normal file
View File

File diff suppressed because it is too large Load Diff

7606
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c Normal file
View File

File diff suppressed because it is too large Load Diff

2623
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c Normal file
View File

File diff suppressed because it is too large Load Diff

4094
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c Normal file
View File

File diff suppressed because it is too large Load Diff

729
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c Normal file
View File

@@ -0,0 +1,729 @@
/**
******************************************************************************
* @file stm32h7xx_hal_uart_ex.c
* @author MCD Application Team
* @brief Extended UART HAL module driver.
* This file provides firmware functions to manage the following extended
* functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART).
* + Initialization and de-initialization functions
* + Peripheral Control functions
*
*
@verbatim
==============================================================================
##### UART peripheral extended features #####
==============================================================================
(#) Declare a UART_HandleTypeDef handle structure.
(#) For the UART RS485 Driver Enable mode, initialize the UART registers
by calling the HAL_RS485Ex_Init() API.
(#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming.
-@- When UART operates in FIFO mode, FIFO mode must be enabled prior
starting RX/TX transfers. Also RX/TX FIFO thresholds must be
configured prior starting RX/TX transfers.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @defgroup UARTEx UARTEx
* @brief UART Extended HAL module driver
* @{
*/
#ifdef HAL_UART_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup UARTEX_Private_Constants UARTEx Private Constants
* @{
*/
/* UART RX FIFO depth */
#define RX_FIFO_DEPTH 16U
/* UART TX FIFO depth */
#define TX_FIFO_DEPTH 16U
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup UARTEx_Private_Functions UARTEx Private Functions
* @{
*/
static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions
* @{
*/
/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Extended Initialization and Configuration Functions
*
@verbatim
===============================================================================
##### Initialization and Configuration functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
in asynchronous mode.
(+) For the asynchronous mode the parameters below can be configured:
(++) Baud Rate
(++) Word Length
(++) Stop Bit
(++) Parity: If the parity is enabled, then the MSB bit of the data written
in the data register is transmitted but is changed by the parity bit.
(++) Hardware flow control
(++) Receiver/transmitter modes
(++) Over Sampling Method
(++) One-Bit Sampling Method
(+) For the asynchronous mode, the following advanced features can be configured as well:
(++) TX and/or RX pin level inversion
(++) data logical level inversion
(++) RX and TX pins swap
(++) RX overrun detection disabling
(++) DMA disabling on RX error
(++) MSB first on communication line
(++) auto Baud rate detection
[..]
The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration
procedures (details for the procedures are available in reference manual).
@endverbatim
Depending on the frame length defined by the M1 and M0 bits (7-bit,
8-bit or 9-bit), the possible UART formats are listed in the
following table.
Table 1. UART frame format.
+-----------------------------------------------------------------------+
| M1 bit | M0 bit | PCE bit | UART frame |
|---------|---------|-----------|---------------------------------------|
| 0 | 0 | 0 | | SB | 8 bit data | STB | |
|---------|---------|-----------|---------------------------------------|
| 0 | 0 | 1 | | SB | 7 bit data | PB | STB | |
|---------|---------|-----------|---------------------------------------|
| 0 | 1 | 0 | | SB | 9 bit data | STB | |
|---------|---------|-----------|---------------------------------------|
| 0 | 1 | 1 | | SB | 8 bit data | PB | STB | |
|---------|---------|-----------|---------------------------------------|
| 1 | 0 | 0 | | SB | 7 bit data | STB | |
|---------|---------|-----------|---------------------------------------|
| 1 | 0 | 1 | | SB | 6 bit data | PB | STB | |
+-----------------------------------------------------------------------+
* @{
*/
/**
* @brief Initialize the RS485 Driver enable feature according to the specified
* parameters in the UART_InitTypeDef and creates the associated handle.
* @param huart UART handle.
* @param Polarity Select the driver enable polarity.
* This parameter can be one of the following values:
* @arg @ref UART_DE_POLARITY_HIGH DE signal is active high
* @arg @ref UART_DE_POLARITY_LOW DE signal is active low
* @param AssertionTime Driver Enable assertion time:
* 5-bit value defining the time between the activation of the DE (Driver Enable)
* signal and the beginning of the start bit. It is expressed in sample time
* units (1/8 or 1/16 bit time, depending on the oversampling rate)
* @param DeassertionTime Driver Enable deassertion time:
* 5-bit value defining the time between the end of the last stop bit, in a
* transmitted message, and the de-activation of the DE (Driver Enable) signal.
* It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
* oversampling rate).
* @retval HAL status
*/
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
uint32_t DeassertionTime)
{
uint32_t temp;
/* Check the UART handle allocation */
if (huart == NULL)
{
return HAL_ERROR;
}
/* Check the Driver Enable UART instance */
assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
/* Check the Driver Enable polarity */
assert_param(IS_UART_DE_POLARITY(Polarity));
/* Check the Driver Enable assertion time */
assert_param(IS_UART_ASSERTIONTIME(AssertionTime));
/* Check the Driver Enable deassertion time */
assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime));
if (huart->gState == HAL_UART_STATE_RESET)
{
/* Allocate lock resource and initialize it */
huart->Lock = HAL_UNLOCKED;
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
UART_InitCallbacksToDefault(huart);
if (huart->MspInitCallback == NULL)
{
huart->MspInitCallback = HAL_UART_MspInit;
}
/* Init the low level hardware */
huart->MspInitCallback(huart);
#else
/* Init the low level hardware : GPIO, CLOCK, CORTEX */
HAL_UART_MspInit(huart);
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
huart->gState = HAL_UART_STATE_BUSY;
/* Disable the Peripheral */
__HAL_UART_DISABLE(huart);
/* Set the UART Communication parameters */
if (UART_SetConfig(huart) == HAL_ERROR)
{
return HAL_ERROR;
}
if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
{
UART_AdvFeatureConfig(huart);
}
/* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
/* Set the Driver Enable polarity */
MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity);
/* Set the Driver Enable assertion and deassertion times */
temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp);
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
/* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
return (UART_CheckIdleState(huart));
}
/**
* @}
*/
/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions
* @brief Extended functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
This subsection provides a set of Wakeup and FIFO mode related callback functions.
(#) Wakeup from Stop mode Callback:
(+) HAL_UARTEx_WakeupCallback()
(#) TX/RX Fifos Callbacks:
(+) HAL_UARTEx_RxFifoFullCallback()
(+) HAL_UARTEx_TxFifoEmptyCallback()
@endverbatim
* @{
*/
/**
* @brief UART wakeup from Stop mode callback.
* @param huart UART handle.
* @retval None
*/
__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(huart);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_UARTEx_WakeupCallback can be implemented in the user file.
*/
}
/**
* @brief UART RX Fifo full callback.
* @param huart UART handle.
* @retval None
*/
__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(huart);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file.
*/
}
/**
* @brief UART TX Fifo empty callback.
* @param huart UART handle.
* @retval None
*/
__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(huart);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file.
*/
}
/**
* @}
*/
/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions
* @brief Extended Peripheral Control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..] This section provides the following functions:
(+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
detection length to more than 4 bits for multiprocessor address mark wake up.
(+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode
trigger: address match, Start Bit detection or RXNE bit status.
(+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode
(+) HAL_UARTEx_DisableStopMode() API disables the above functionality
(+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode
(+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode
(+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold
(+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold
@endverbatim
* @{
*/
/**
* @brief By default in multiprocessor mode, when the wake up method is set
* to address mark, the UART handles only 4-bit long addresses detection;
* this API allows to enable longer addresses detection (6-, 7- or 8-bit
* long).
* @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode,
* 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode.
* @param huart UART handle.
* @param AddressLength This parameter can be one of the following values:
* @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address
* @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address
* @retval HAL status
*/
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
{
/* Check the UART handle allocation */
if (huart == NULL)
{
return HAL_ERROR;
}
/* Check the address length parameter */
assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
huart->gState = HAL_UART_STATE_BUSY;
/* Disable the Peripheral */
__HAL_UART_DISABLE(huart);
/* Set the address length */
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
/* TEACK and/or REACK to check before moving huart->gState to Ready */
return (UART_CheckIdleState(huart));
}
/**
* @brief Set Wakeup from Stop mode interrupt flag selection.
* @note It is the application responsibility to enable the interrupt used as
* usart_wkup interrupt source before entering low-power mode.
* @param huart UART handle.
* @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status.
* This parameter can be one of the following values:
* @arg @ref UART_WAKEUP_ON_ADDRESS
* @arg @ref UART_WAKEUP_ON_STARTBIT
* @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
{
HAL_StatusTypeDef status = HAL_OK;
uint32_t tickstart;
/* check the wake-up from stop mode UART instance */
assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
/* check the wake-up selection parameter */
assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Disable the Peripheral */
__HAL_UART_DISABLE(huart);
/* Set the wake-up selection scheme */
MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent);
if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS)
{
UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection);
}
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
/* Init tickstart for timeout managment*/
tickstart = HAL_GetTick();
/* Wait until REACK flag is set */
if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
{
status = HAL_TIMEOUT;
}
else
{
/* Initialize the UART State */
huart->gState = HAL_UART_STATE_READY;
}
/* Process Unlocked */
__HAL_UNLOCK(huart);
return status;
}
/**
* @brief Enable UART Stop Mode.
* @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart)
{
/* Process Locked */
__HAL_LOCK(huart);
/* Set UESM bit */
SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Disable UART Stop Mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart)
{
/* Process Locked */
__HAL_LOCK(huart);
/* Clear UESM bit */
CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Enable the FIFO mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart)
{
uint32_t tmpcr1;
/* Check parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Enable FIFO mode */
SET_BIT(tmpcr1, USART_CR1_FIFOEN);
huart->FifoMode = UART_FIFOMODE_ENABLE;
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
/* Determine the number of data to process during RX/TX ISR execution */
UARTEx_SetNbDataToProcess(huart);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Disable the FIFO mode.
* @param huart UART handle.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart)
{
uint32_t tmpcr1;
/* Check parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Enable FIFO mode */
CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN);
huart->FifoMode = UART_FIFOMODE_DISABLE;
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Set the TXFIFO threshold.
* @param huart UART handle.
* @param Threshold TX FIFO threshold value
* This parameter can be one of the following values:
* @arg @ref UART_TXFIFO_THRESHOLD_1_8
* @arg @ref UART_TXFIFO_THRESHOLD_1_4
* @arg @ref UART_TXFIFO_THRESHOLD_1_2
* @arg @ref UART_TXFIFO_THRESHOLD_3_4
* @arg @ref UART_TXFIFO_THRESHOLD_7_8
* @arg @ref UART_TXFIFO_THRESHOLD_8_8
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold)
{
uint32_t tmpcr1;
/* Check parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Update TX threshold configuration */
MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold);
/* Determine the number of data to process during RX/TX ISR execution */
UARTEx_SetNbDataToProcess(huart);
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @brief Set the RXFIFO threshold.
* @param huart UART handle.
* @param Threshold RX FIFO threshold value
* This parameter can be one of the following values:
* @arg @ref UART_RXFIFO_THRESHOLD_1_8
* @arg @ref UART_RXFIFO_THRESHOLD_1_4
* @arg @ref UART_RXFIFO_THRESHOLD_1_2
* @arg @ref UART_RXFIFO_THRESHOLD_3_4
* @arg @ref UART_RXFIFO_THRESHOLD_7_8
* @arg @ref UART_RXFIFO_THRESHOLD_8_8
* @retval HAL status
*/
HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold)
{
uint32_t tmpcr1;
/* Check the parameters */
assert_param(IS_UART_FIFO_INSTANCE(huart->Instance));
assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold));
/* Process Locked */
__HAL_LOCK(huart);
huart->gState = HAL_UART_STATE_BUSY;
/* Save actual UART configuration */
tmpcr1 = READ_REG(huart->Instance->CR1);
/* Disable UART */
__HAL_UART_DISABLE(huart);
/* Update RX threshold configuration */
MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold);
/* Determine the number of data to process during RX/TX ISR execution */
UARTEx_SetNbDataToProcess(huart);
/* Restore UART configuration */
WRITE_REG(huart->Instance->CR1, tmpcr1);
huart->gState = HAL_UART_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(huart);
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
/** @addtogroup UARTEx_Private_Functions
* @{
*/
/**
* @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection.
* @param huart UART handle.
* @param WakeUpSelection UART wake up from stop mode parameters.
* @retval None
*/
static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
{
assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength));
/* Set the USART address length */
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength);
/* Set the USART address node */
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS));
}
/**
* @brief Calculate the number of data to process in RX/TX ISR.
* @note The RX FIFO depth and the TX FIFO depth is extracted from
* the UART configuration registers.
* @param huart UART handle.
* @retval None
*/
static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart)
{
uint8_t rx_fifo_depth;
uint8_t tx_fifo_depth;
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (huart->FifoMode == UART_FIFOMODE_DISABLE)
{
huart->NbTxDataToProcess = 1U;
huart->NbRxDataToProcess = 1U;
}
else
{
rx_fifo_depth = RX_FIFO_DEPTH;
tx_fifo_depth = TX_FIFO_DEPTH;
rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos);
tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos);
huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold];
huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold];
}
}
/**
* @}
*/
#endif /* HAL_UART_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2013
demo/stm32/usb_device/stm32h743vbt6/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_usb.c Normal file
View File

File diff suppressed because it is too large Load Diff

1
demo/stm32/usb_host/stm32f429igt6/Core/Src/main.c
View File

@@ -71,7 +71,6 @@ int fputc(int ch, FILE *f)
void usb_hc_low_level_init(void)
{
MX_USB_OTG_HS_HCD_Init();
HAL_HCD_Start(&hhcd_USB_OTG_HS);
}
/* USER CODE END 0 */

57
demo/stm32/usb_host/stm32f429igt6/MDK-ARM/stm32f429igt6.uvoptx
View File

@@ -103,7 +103,7 @@
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>6</nTsel>
<nTsel>3</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
@@ -114,9 +114,14 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>CMSIS_AGDI</Key>
<Name>-X"Fire CMSIS-DAP" -UFS-00001418 -O239 -S10 -C0 -P00000000 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO65554 -TC10000000 -TT10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F429IGTx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
<Key>ARMRTXEVENTFLAGS</Key>
@@ -135,7 +140,7 @@
<SetRegEntry>
<Number>0</Number>
<Key>DLGUARM</Key>
<Name>(105=-1,-1,-1,-1,0)</Name>
<Name></Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
@@ -152,22 +157,6 @@
<Bp>
<Number>0</Number>
<Type>0</Type>
<LineNumber>510</LineNumber>
<EnabledFlag>1</EnabledFlag>
<Address>134231300</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>..\..\..\..\..\core\usbh_core.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\stm32f429igt6\../../../../../core/usbh_core.c\510</Expression>
</Bp>
<Bp>
<Number>1</Number>
<Type>0</Type>
<LineNumber>89</LineNumber>
<EnabledFlag>1</EnabledFlag>
<Address>0</Address>
@@ -246,7 +235,7 @@
<EnableFlashSeq>0</EnableFlashSeq>
<EnableLog>0</EnableLog>
<Protocol>2</Protocol>
<DbgClock>4000000</DbgClock>
<DbgClock>2000000</DbgClock>
</DebugDescription>
</TargetOption>
</Target>
@@ -280,18 +269,6 @@
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Inc\FreeRTOSConfig.h</PathWithFileName>
<FilenameWithoutPath>FreeRTOSConfig.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@@ -303,7 +280,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@@ -315,7 +292,7 @@
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@@ -325,6 +302,18 @@
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\Core\Inc\FreeRTOSConfig.h</PathWithFileName>
<FilenameWithoutPath>FreeRTOSConfig.h</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>

16
demo/stm32/usb_host/stm32f429igt6/MDK-ARM/stm32f429igt6.uvprojx
View File

@@ -314,7 +314,7 @@
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>2</Optim>
<Optim>3</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>1</OneElfS>
@@ -329,8 +329,8 @@
<uC99>1</uC99>
<uGnu>0</uGnu>
<useXO>0</useXO>
<v6Lang>3</v6Lang>
<v6LangP>3</v6LangP>
<v6Lang>4</v6Lang>
<v6LangP>4</v6LangP>
<vShortEn>1</vShortEn>
<vShortWch>1</vShortWch>
<v6Lto>0</v6Lto>
@@ -394,11 +394,6 @@
<Group>
<GroupName>Application/User/Core</GroupName>
<Files>
<File>
<FileName>FreeRTOSConfig.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Inc\FreeRTOSConfig.h</FilePath>
</File>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
@@ -414,6 +409,11 @@
<FileType>1</FileType>
<FilePath>../Core/Src/stm32f4xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>FreeRTOSConfig.h</FileName>
<FileType>5</FileType>
<FilePath>..\Core\Inc\FreeRTOSConfig.h</FilePath>
</File>
</Files>
</Group>
<Group>