diff --git a/port/ehci/usb_glue_hpm.c b/port/ehci/usb_glue_hpm.c
index 4425ddba..9034ea7a 100644
--- a/port/ehci/usb_glue_hpm.c
+++ b/port/ehci/usb_glue_hpm.c
@@ -7,8 +7,8 @@
 #error "hpm ehci must set CONFIG_USB_EHCI_HPMICRO=1"
 #endif
 
-#if !defined(CONFIG_HPM_USB_BASE) || !defined(CONFIG_HPM_USB_IRQn)
-#error "hpm ehci must config CONFIG_HPM_USB_BASE and CONFIG_HPM_USB_IRQn"
+#if !defined(CONFIG_HPM_USBH_BASE) || !defined(CONFIG_HPM_USBH_IRQn)
+#error "hpm ehci must config CONFIG_HPM_USBH_BASE and CONFIG_HPM_USBH_IRQn"
 #endif
 
 static void usb_host_mode_init(USB_Type *ptr)
@@ -32,20 +32,20 @@ static void usb_host_mode_init(USB_Type *ptr)
 
 void usb_hc_low_level_init()
 {
-    usb_phy_init((USB_Type *)CONFIG_HPM_USB_BASE);
-    intc_m_enable_irq(CONFIG_HPM_USB_IRQn);
+    usb_phy_init((USB_Type *)CONFIG_HPM_USBH_BASE);
+    intc_m_enable_irq(CONFIG_HPM_USBH_IRQn);
 }
 
 void usb_hc_low_level2_init()
 {
-    usb_host_mode_init((USB_Type *)CONFIG_HPM_USB_BASE);
+    usb_host_mode_init((USB_Type *)CONFIG_HPM_USBH_BASE);
 }
 
 uint8_t usbh_get_port_speed(const uint8_t port)
 {
     uint8_t speed;
 
-    speed = usb_get_port_speed((USB_Type *)CONFIG_HPM_USB_BASE);
+    speed = usb_get_port_speed((USB_Type *)CONFIG_HPM_USBH_BASE);
 
     if (speed == 0x00) {
         return USB_SPEED_FULL;
@@ -66,4 +66,4 @@ void isr_usb(void)
 {
     USBH_IRQHandler();
 }
-SDK_DECLARE_EXT_ISR_M(CONFIG_HPM_USB_IRQn, isr_usb)
\ No newline at end of file
+SDK_DECLARE_EXT_ISR_M(CONFIG_HPM_USBH_IRQn, isr_usb)
diff --git a/port/ehci/usb_hc_ehci.c b/port/ehci/usb_hc_ehci.c
index 8179f34c..f53bd944 100644
--- a/port/ehci/usb_hc_ehci.c
+++ b/port/ehci/usb_hc_ehci.c
@@ -742,7 +742,7 @@ static int usbh_reset_port(const uint8_t port)
     uint32_t regval;
 
 #if defined(CONFIG_USB_EHCI_HPMICRO) && CONFIG_USB_EHCI_HPMICRO
-    if ((*(volatile uint32_t *)(CONFIG_HPM_USB_BASE + 0x224) & 0xc0) == (2 << 6)) { /* Hardcode for hpm */
+    if ((*(volatile uint32_t *)(CONFIG_HPM_USBH_BASE + 0x224) & 0xc0) == (2 << 6)) { /* Hardcode for hpm */
         EHCI_HCOR->portsc[port - 1] |= (1 << 29);
     } else {
         EHCI_HCOR->portsc[port - 1] &= ~(1 << 29);
diff --git a/port/hpm/usb_dc_hpm.c b/port/hpm/usb_dc_hpm.c
index dc1a43d1..930e2438 100644
--- a/port/hpm/usb_dc_hpm.c
+++ b/port/hpm/usb_dc_hpm.c
@@ -10,8 +10,8 @@
 #define USB_NUM_BIDIR_ENDPOINTS USB_SOC_DCD_MAX_ENDPOINT_COUNT
 #endif
 
-#if !defined(CONFIG_HPM_USB_BASE) || !defined(CONFIG_HPM_USB_IRQn)
-#error "hpm dcd must config CONFIG_HPM_USB_BASE and CONFIG_HPM_USB_IRQn"
+#if !defined(CONFIG_HPM_USBD_BASE) || !defined(CONFIG_HPM_USBD_IRQn)
+#error "hpm dcd must config CONFIG_HPM_USBD_BASE and CONFIG_HPM_USBD_IRQn"
 #endif
 
 /* USBSTS, USBINTR */
@@ -66,7 +66,7 @@ int usb_dc_init(void)
 
     memset(&g_hpm_udc, 0, sizeof(struct hpm_udc));
     g_hpm_udc.handle = &usb_device_handle[0];
-    g_hpm_udc.handle->regs = (USB_Type *)CONFIG_HPM_USB_BASE;
+    g_hpm_udc.handle->regs = (USB_Type *)CONFIG_HPM_USBD_BASE;
     g_hpm_udc.handle->dcd_data = &_dcd_data;
 
     uint32_t int_mask;
@@ -75,7 +75,7 @@ int usb_dc_init(void)
 
     usb_device_init(g_hpm_udc.handle, int_mask);
 
-    intc_m_enable_irq(CONFIG_HPM_USB_IRQn);
+    intc_m_enable_irq(CONFIG_HPM_USBD_IRQn);
     return 0;
 }
 
@@ -287,4 +287,4 @@ void isr_usb(void)
 {
     USBD_IRQHandler();
 }
-SDK_DECLARE_EXT_ISR_M(CONFIG_HPM_USB_IRQn, isr_usb)
+SDK_DECLARE_EXT_ISR_M(CONFIG_HPM_USBD_IRQn, isr_usb)