add esp dwc2 glue

2024-03-17 22:48:35 +08:00
parent e40c72f3a8
commit b628c737ec
1 changed files with 77 additions and 0 deletions
--- a/port/dwc2/usb_glue_esp.c
+++ b/port/dwc2/usb_glue_esp.c
@@ -0,0 +1,77 @@
+/*
+ * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#include "sdkconfig.h"
+#include "esp_idf_version.h"
+#include "esp_intr_alloc.h"
+#include "esp_private/usb_phy.h"
+#include "soc/periph_defs.h"
+#include "usb_config.h"
+#include "usb_log.h"
+
+#ifdef CONFIG_IDF_TARGET_ESP32S2
+#define DEFAULT_CPU_FREQ_MHZ                CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ
+#elif CONFIG_IDF_TARGET_ESP32S3
+#define DEFAULT_CPU_FREQ_MHZ                CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ
+#else
+#define DEFAULT_CPU_FREQ_MHZ                160
+#endif
+
+uint32_t SystemCoreClock = (DEFAULT_CPU_FREQ_MHZ*1000*1000);
+static usb_phy_handle_t s_phy_handle = NULL;
+static intr_handle_t s_interrupt_handle = NULL;
+
+static void usb_dc_interrupt_cb(void *arg_pv)
+{
+    extern void USBD_IRQHandler(0);
+    USBD_IRQHandler(0);
+}
+
+void usb_dc_low_level_init(void)
+{
+    usb_phy_config_t phy_config = {
+        .controller = USB_PHY_CTRL_OTG,
+        .otg_mode = USB_OTG_MODE_DEVICE,
+        .target = USB_PHY_TARGET_INT,
+    };
+
+    esp_err_t ret = usb_new_phy(&phy_config, &s_phy_handle);
+    if (ret != ESP_OK) {
+        USB_LOG_ERR("USB Phy Init Failed!\r\n");
+        return;
+    }
+
+    // TODO: Check when to enable interrupt
+    ret = esp_intr_alloc(ETS_USB_INTR_SOURCE, ESP_INTR_FLAG_LEVEL2, usb_dc_interrupt_cb, 0, &s_interrupt_handle);
+    if (ret != ESP_OK) {
+        USB_LOG_ERR("USB Interrupt Init Failed!\r\n");
+        return;
+    }
+    USB_LOG_INFO("cherryusb, version: 0x%06x\r\n", CHERRYUSB_VERSION);
+    USB_LOG_INFO("esp_cherryusb, version: %d.%d.%d\r\n", ESP_CHERRYUSB_VER_MAJOR, ESP_CHERRYUSB_VER_MINOR, ESP_CHERRYUSB_VER_PATCH);
+}
+
+void usb_dc_low_level_deinit(void)
+{
+    if (s_interrupt_handle) {
+        esp_intr_free(s_interrupt_handle);
+        s_interrupt_handle = NULL;
+    }
+    if (s_phy_handle) {
+        usb_del_phy(s_phy_handle);
+        s_phy_handle = NULL;
+    }
+}
+
+uint32_t usbd_get_dwc2_gccfg_conf(void)
+{
+    return 0;
+}
+
+// USB Host only support HS mode?
+// void usb_hc_low_level_init(void)
+
+// There is no usb_hc_deinit, deinit USB Host is not supported
+// void usb_hc_low_level_deinit(void)