refactor usb class structure
This commit is contained in:
121
class/msc/usb_msc.h
Normal file
121
class/msc/usb_msc.h
Normal file
@@ -0,0 +1,121 @@
|
||||
/**
|
||||
* @file
|
||||
* @brief USB Mass Storage Class public header
|
||||
*
|
||||
* Header follows the Mass Storage Class Specification
|
||||
* (Mass_Storage_Specification_Overview_v1.4_2-19-2010.pdf) and
|
||||
* Mass Storage Class Bulk-Only Transport Specification
|
||||
* (usbmassbulk_10.pdf).
|
||||
* Header is limited to Bulk-Only Transfer protocol.
|
||||
*/
|
||||
|
||||
#ifndef _USB_MSC_H__
|
||||
#define _USB_MSC_H__
|
||||
|
||||
/* MSC Subclass Codes */
|
||||
#define MSC_SUBCLASS_RBC 0x01 /* Reduced block commands (e.g., flash devices) */
|
||||
#define MSC_SUBCLASS_SFF8020I_MMC2 0x02 /* SFF-8020i/MMC-2 (ATAPI) (e.g., C/DVD) */
|
||||
#define MSC_SUBCLASS_QIC157 0x03 /* QIC-157 (e.g., tape device) */
|
||||
#define MSC_SUBCLASS_UFI 0x04 /* e.g. floppy device */
|
||||
#define MSC_SUBCLASS_SFF8070I 0x05 /* SFF-8070i (e.g. floppy disk) */
|
||||
#define MSC_SUBCLASS_SCSI 0x06 /* SCSI transparent */
|
||||
|
||||
/* MSC Protocol Codes */
|
||||
#define MSC_PROTOCOL_CBI_INT 0x00 /* CBI transport with command completion interrupt */
|
||||
#define MSC_PROTOCOL_CBI_NOINT 0x01 /* CBI transport without command completion interrupt */
|
||||
#define MSC_PROTOCOL_BULK_ONLY 0x50 /* Bulk only transport */
|
||||
|
||||
/* MSC Request Codes */
|
||||
#define MSC_REQUEST_RESET 0xFF
|
||||
#define MSC_REQUEST_GET_MAX_LUN 0xFE
|
||||
|
||||
/** MSC Command Block Wrapper (CBW) Signature */
|
||||
#define MSC_CBW_Signature 0x43425355
|
||||
/** Bulk-only Command Status Wrapper (CSW) Signature */
|
||||
#define MSC_CSW_Signature 0x53425355
|
||||
|
||||
/** MSC Command Block Status Values */
|
||||
#define CSW_STATUS_CMD_PASSED 0x00
|
||||
#define CSW_STATUS_CMD_FAILED 0x01
|
||||
#define CSW_STATUS_PHASE_ERROR 0x02
|
||||
|
||||
#define MSC_MAX_CDB_LEN (16) /* Max length of SCSI Command Data Block */
|
||||
|
||||
/** MSC Bulk-Only Command Block Wrapper (CBW) */
|
||||
struct CBW {
|
||||
uint32_t dSignature; /* 'USBC' = 0x43425355 */
|
||||
uint32_t dTag; /* Depends on command id */
|
||||
uint32_t dDataLength; /* Number of bytes that host expects to transfer */
|
||||
uint8_t bmFlags; /* Bit 7: Direction=IN (other obsolete or reserved) */
|
||||
uint8_t bLUN; /* LUN (normally 0) */
|
||||
uint8_t bCBLength; /* len of cdb[] */
|
||||
uint8_t CB[MSC_MAX_CDB_LEN]; /* Command Data Block */
|
||||
} __PACKED;
|
||||
|
||||
#define USB_SIZEOF_MSC_CBW 31
|
||||
|
||||
/** MSC Bulk-Only Command Status Wrapper (CSW) */
|
||||
struct CSW {
|
||||
uint32_t dSignature; /* 'USBS' = 0x53425355 */
|
||||
uint32_t dTag; /* Same tag as original command */
|
||||
uint32_t dDataResidue; /* Amount not transferred */
|
||||
uint8_t bStatus; /* Status of transfer */
|
||||
} __PACKED;
|
||||
|
||||
#define USB_SIZEOF_MSC_CSW 13
|
||||
|
||||
/*Length of template descriptor: 23 bytes*/
|
||||
#define MSC_DESCRIPTOR_LEN (9 + 7 + 7)
|
||||
// clang-format off
|
||||
#ifndef CONFIG_USB_HS
|
||||
#define MSC_DESCRIPTOR_INIT(bFirstInterface, out_ep, in_ep,str_idx) \
|
||||
/* Interface */ \
|
||||
0x09, /* bLength */ \
|
||||
USB_DESCRIPTOR_TYPE_INTERFACE, /* bDescriptorType */ \
|
||||
bFirstInterface, /* bInterfaceNumber */ \
|
||||
0x00, /* bAlternateSetting */ \
|
||||
0x02, /* bNumEndpoints */ \
|
||||
USB_DEVICE_CLASS_MASS_STORAGE, /* bInterfaceClass */ \
|
||||
MSC_SUBCLASS_SCSI, /* bInterfaceSubClass */ \
|
||||
MSC_PROTOCOL_BULK_ONLY, /* bInterfaceProtocol */ \
|
||||
str_idx, /* iInterface */ \
|
||||
0x07, /* bLength */ \
|
||||
USB_DESCRIPTOR_TYPE_ENDPOINT, /* bDescriptorType */ \
|
||||
out_ep, /* bEndpointAddress */ \
|
||||
0x02, /* bmAttributes */ \
|
||||
0x40, 0x00, /* wMaxPacketSize */ \
|
||||
0x00, /* bInterval */ \
|
||||
0x07, /* bLength */ \
|
||||
USB_DESCRIPTOR_TYPE_ENDPOINT, /* bDescriptorType */ \
|
||||
in_ep, /* bEndpointAddress */ \
|
||||
0x02, /* bmAttributes */ \
|
||||
0x40, 0x00, /* wMaxPacketSize */ \
|
||||
0x00 /* bInterval */
|
||||
#else
|
||||
#define MSC_DESCRIPTOR_INIT(bFirstInterface, out_ep, in_ep,str_idx) \
|
||||
/* Interface */ \
|
||||
0x09, /* bLength */ \
|
||||
USB_DESCRIPTOR_TYPE_INTERFACE, /* bDescriptorType */ \
|
||||
bFirstInterface, /* bInterfaceNumber */ \
|
||||
0x00, /* bAlternateSetting */ \
|
||||
0x02, /* bNumEndpoints */ \
|
||||
USB_DEVICE_CLASS_MASS_STORAGE, /* bInterfaceClass */ \
|
||||
MSC_SUBCLASS_SCSI, /* bInterfaceSubClass */ \
|
||||
MSC_PROTOCOL_BULK_ONLY, /* bInterfaceProtocol */ \
|
||||
str_idx, /* iInterface */ \
|
||||
0x07, /* bLength */ \
|
||||
USB_DESCRIPTOR_TYPE_ENDPOINT, /* bDescriptorType */ \
|
||||
out_ep, /* bEndpointAddress */ \
|
||||
0x02, /* bmAttributes */ \
|
||||
0x00, 0x02, /* wMaxPacketSize */ \
|
||||
0x00, /* bInterval */ \
|
||||
0x07, /* bLength */ \
|
||||
USB_DESCRIPTOR_TYPE_ENDPOINT, /* bDescriptorType */ \
|
||||
in_ep, /* bEndpointAddress */ \
|
||||
0x02, /* bmAttributes */ \
|
||||
0x00, 0x02, /* wMaxPacketSize */ \
|
||||
0x00 /* bInterval */
|
||||
#endif
|
||||
// clang-format on
|
||||
|
||||
#endif /* USB_MSC_H_ */
|
||||
Reference in New Issue
Block a user