yemai/Artery-AT32-PlatformIO
1
0
Fork 0
mirror of https://github.com/martinloren/Artery-AT32-PlatformIO.git synced 2026-05-21 09:22:14 +00:00
Code Issues Packages Projects Releases Wiki Activity

updated

Browse Source
This commit is contained in:
V24473
2022-03-03 14:54:33 +08:00
parent 25ce57e5cb
commit a371d0e16b
1 changed files with 29 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
at32flash/README.md
View File

@@ -1,22 +1,22 @@
# at32flash # at32flash
Flash program for AT32 using the AT serial bootloader, based on [stm32flash](https://github.com/stm32duino/stm32flash). Flash program for AT32 using the AT serial bootloader, based on [stm32flash](https://github.com/stm32duino/stm32flash).
at32flash 0.1 is a release with these highlights: **at32flash 0.1** is a release with these highlights:
- Support for **AT32F435** beside the STM32 MCUs - Support for **AT32F435** beside the STM32 MCUs
## Features ## Features
UART and I2C transports supported - UART and I2C transports supported
device identification - device identification
write to flash/ram - write to flash/ram
read from flash/ram - read from flash/ram
auto-detect Intel HEX or raw binary input format with option to force binary - auto-detect Intel HEX or raw binary input format with option to force binary
flash from binary file - flash from binary file
save flash to binary file - save flash to binary file
verify & retry up to N times on failed writes - verify & retry up to N times on failed writes
start execution at specified address - start execution at specified address
software reset the device when finished if -R is specified - software reset the device when finished if -R is specified
resume already initialized connection (for when reset fails, UART only) - resume already initialized connection (for when reset fails, UART only)
GPIO signalling to enter bootloader mode (hardware dependent) - GPIO signalling to enter bootloader mode (hardware dependent)
## Usage synopsis: ## Usage synopsis:
@@ -51,7 +51,7 @@ Usage: ./at32flash [-bvngfhc] [-[rw] filename] [tty_device | i2c_device]
sequence=[[-]signal]&|,[sequence] sequence=[[-]signal]&|,[sequence]
``` ```
## GPIO sequence: ## GPIO sequence
The following signals can appear in a sequence: The following signals can appear in a sequence:
Integer number representing GPIO pin Integer number representing GPIO pin
'dtr', 'rts' or 'brk' representing serial port signal 'dtr', 'rts' or 'brk' representing serial port signal
@@ -61,7 +61,7 @@ Usage: ./at32flash [-bvngfhc] [-[rw] filename] [tty_device | i2c_device]
The following modifiers can be prepended to a signal: The following modifiers can be prepended to a signal:
'-' reset signal (low) instead of setting it (high) '-' reset signal (low) instead of setting it (high)
## Examples: ## Examples
``` ```
Get device information: Get device information:
./at32flash /dev/ttyS0 ./at32flash /dev/ttyS0
@@ -92,3 +92,17 @@ Usage: ./at32flash [-bvngfhc] [-[rw] filename] [tty_device | i2c_device]
## Bug reports and patches ## Bug reports and patches
Please file bugs and post patches here in GitHub. Please file bugs and post patches here in GitHub.
# How to compile for Windows
(internal notes)
- Get the latest version of Mingw-w64 via [MSYS2](https://www.msys2.org/), which provides up-to-date native builds of GCC, Mingw-w64, and other helpful C++ tools and libraries. You can download the latest installer from the MSYS2 page or use this [link to the installer](https://github.com/msys2/msys2-installer/releases/download/2022-01-18/msys2-x86_64-20220118.exe).
- Follow the Installation instructions on the MSYS2 website to install Mingw-w64. Commands to be lunched in MinGW:
```
pacman -Syu
pacman -Su
pacman -S --needed base-devel mingw-w64-x86_64-toolchain
pacman -S make
pacman -S mingw-w64-x86_64-gcc
```
- In MinGW shell, enter the project folder and lunch `make`
- (optional) Add the path to your Mingw-w64 bin folder (ie. `C:\msys64\mingw64\bin`) to the Windows PATH environment variable.