From 6b93931b0b72edfff50aded0ecf90034fad83001 Mon Sep 17 00:00:00 2001
From: ZYQ-FEIYUE <1404806582@qq.com>
Date: Sun, 25 Dec 2022 21:51:58 +0800
Subject: [PATCH] Serial port to rectify odd and even check problems

---
 .../examples/01.Basics/Blink/Blink.ino        | 81 +++++++------------
 package_at32_index.json                       |  2 +-
 platform.txt                                  |  2 +-
 3 files changed, 32 insertions(+), 53 deletions(-)

diff --git a/libraries/Generic_Examples/examples/01.Basics/Blink/Blink.ino b/libraries/Generic_Examples/examples/01.Basics/Blink/Blink.ino
index 9164f3b..32d7b88 100644
--- a/libraries/Generic_Examples/examples/01.Basics/Blink/Blink.ino
+++ b/libraries/Generic_Examples/examples/01.Basics/Blink/Blink.ino
@@ -1,58 +1,37 @@
-// base class GxEPD2_GFX can be used to pass references or pointers to the display instance as parameter, uses ~1.2k more code
-// enable or disable GxEPD2_GFX base class
-#define ENABLE_GxEPD2_GFX 0
+/*
+  Blink
 
-#include <GxEPD2_BW.h>
-#include <GxEPD2_3C.h>
-#include <Fonts/FreeMonoBold9pt7b.h>
+  Turns an LED on for one second, then off for one second, repeatedly.
 
-// ESP32-C3 SS=7,SCL(SCK)=4,SDA(MOSI)=6,BUSY=3,RST=2,DC=1 
-GxEPD2_BW<GxEPD2_213_B74, GxEPD2_213_B74::HEIGHT> display(GxEPD2_213_B74(/*CS=5*/ SS, /*DC=*/ 1, /*RST=*/ 2, /*BUSY=*/ 3)); // GDEM0213B74 122x250, SSD1680
-//GxEPD2_3C<GxEPD2_213_Z98c, GxEPD2_213_Z98c::HEIGHT> display(GxEPD2_213_Z98c(/*CS=5*/ SS, /*DC=*/ 1, /*RST=*/ 2, /*BUSY=*/ 3)); // GDEY0213Z98 122x250, SSD1680
+  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
+  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
+  the correct LED pin independent of which board is used.
+  If you want to know what pin the on-board LED is connected to on your Arduino
+  model, check the Technical Specs of your board at:
+  https://www.arduino.cc/en/Main/Products
 
-void setup()
-{
-  pinMode(8, OUTPUT);
-  digitalWrite(8, HIGH);
-    
-  display.init(115200,true,50,false);
-  helloWorld();
-  display.hibernate();
-}
-
-const char HelloWorld[] = "Hello World!";
-const char HelloWeACtStudio[] = "Hello WeAct Studio!";
-
-void helloWorld()
-{
-  display.setRotation(1);
-  display.setFont(&FreeMonoBold9pt7b);
-  display.setTextColor(GxEPD_BLACK);
-  int16_t tbx, tby; uint16_t tbw, tbh;
-  display.getTextBounds(HelloWorld, 0, 0, &tbx, &tby, &tbw, &tbh);
-  // center the bounding box by transposition of the origin:
-  uint16_t x = ((display.width() - tbw) / 2) - tbx;
-  uint16_t y = ((display.height() - tbh) / 2) - tby;
-  display.setFullWindow();
-  display.firstPage();
-  do
-  {
-    display.fillScreen(GxEPD_WHITE);
-    display.setCursor(x, y-tbh);
-    display.print(HelloWorld);
-    display.setTextColor(display.epd2.hasColor ? GxEPD_RED : GxEPD_BLACK);
-    display.getTextBounds(HelloWeACtStudio, 0, 0, &tbx, &tby, &tbw, &tbh);
-    x = ((display.width() - tbw) / 2) - tbx;
-    display.setCursor(x, y+2*tbh);
-    display.print(HelloWeACtStudio);
-  }
-  while (display.nextPage());
+  modified 8 May 2014
+  by Scott Fitzgerald
+  modified 2 Sep 2016
+  by Arturo Guadalupi
+  modified 8 Sep 2016
+  by Colby Newman
+
+  This example code is in the public domain.
+
+  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
+*/
+
+// the setup function runs once when you press reset or power the board
+void setup() {
+  // initialize digital pin LED_BUILTIN as an output.
+  pinMode(PC13, OUTPUT);
 }
 
+// the loop function runs over and over again forever
 void loop() {
-  // put your main code here, to run repeatedly:
-  digitalWrite(8, HIGH);
-  delay(1000);
-  digitalWrite(8, LOW);
-  delay(1000);  
+  digitalWrite(PC13, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(1000);                       // wait for a second
+  digitalWrite(PC13, LOW);    // turn the LED off by making the voltage LOW
+  delay(1000);                       // wait for a second
 }
diff --git a/package_at32_index.json b/package_at32_index.json
index f072d70..dafcd3b 100644
--- a/package_at32_index.json
+++ b/package_at32_index.json
@@ -12,7 +12,7 @@
         {
           "name": "AT32F403ACGU7 Core Board",
           "architecture": "at32f403a",
-          "version": "0.0.7",
+          "version": "0.0.8",
           "category": "Contributed",
           "url": "https://github.com/WeActStudio/ArduinoCore-AT32F4/archive/refs/heads/main.zip",
           "archiveFileName": "ArduinoCore-AT32F4-main.zip",
diff --git a/platform.txt b/platform.txt
index 988c3a6..8defd69 100644
--- a/platform.txt
+++ b/platform.txt
@@ -1,6 +1,6 @@
 ##==============================================##
 name=WeActStudio AT32F403A Boards
-version=0.0.7
+version=0.0.8
 ##==============================================##
 
 ####AT32 compile variables