yemai/AT32F413_Firmware_Library
1
0
Fork 0
mirror of https://github.com/ArteryTek/AT32F413_Firmware_Library.git synced 2026-05-21 01:12:01 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

update version to v2.0.9

Browse Source
This commit is contained in:
Artery-MCU
2023-02-28 12:56:05 +08:00
parent 0d6e76999d
commit 704a2ff779
398 changed files with 2669 additions and 9078 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
AT32F413_periph_lib_V2.0.8.chm → AT32F413_periph_lib_V2.0.9.chm
View File

Binary file not shown.

BIN
document/AT32F413固件库BSP&Pack应用指南.pdf
View File

Binary file not shown.

BIN
document/ReleaseNotes_AT32F413_Firmware_Library.pdf
View File

Binary file not shown.

2
libraries/cmsis/cm4/device_support/at32f413.h
View File

@@ -101,7 +101,7 @@ extern "C" {
*/
#define __AT32F413_LIBRARY_VERSION_MAJOR (0x02) /*!< [31:24] major version */
#define __AT32F413_LIBRARY_VERSION_MIDDLE (0x00) /*!< [23:16] middle version */
#define __AT32F413_LIBRARY_VERSION_MINOR (0x08) /*!< [15:8] minor version */
#define __AT32F413_LIBRARY_VERSION_MINOR (0x09) /*!< [15:8] minor version */
#define __AT32F413_LIBRARY_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __AT32F413_LIBRARY_VERSION ((__AT32F413_LIBRARY_VERSION_MAJOR << 24) | \
(__AT32F413_LIBRARY_VERSION_MIDDLE << 16) | \

5
libraries/cmsis/cm4/device_support/at32f413_conf_template.h
View File

@@ -45,8 +45,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

14
libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413x8_FLASH.ld
View File

@@ -33,6 +33,7 @@ MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K
SPIM (rx) : ORIGIN = 0x08400000, LENGTH = 16384K
}
/* Define output sections */
@@ -115,6 +116,19 @@ SECTIONS
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
_spim_init_base = LOADADDR(.spim);
_spim_init_length = SIZEOF(.spim);
.spim :
{
. = ALIGN(4);
_spim_start = .; /* create a global symbol at spim start */
*(.spim) /* .spim sections */
*(.spim*) /* .spim* sections */
. = ALIGN(4);
_spim_end = .; /* define a global symbols at end of spim */
} >SPIM
/* Uninitialized data section */
. = ALIGN(4);
.bss :

14
libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xB_FLASH.ld
View File

@@ -33,6 +33,7 @@ MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K
SPIM (rx) : ORIGIN = 0x08400000, LENGTH = 16384K
}
/* Define output sections */
@@ -115,6 +116,19 @@ SECTIONS
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
_spim_init_base = LOADADDR(.spim);
_spim_init_length = SIZEOF(.spim);
.spim :
{
. = ALIGN(4);
_spim_start = .; /* create a global symbol at spim start */
*(.spim) /* .spim sections */
*(.spim*) /* .spim* sections */
. = ALIGN(4);
_spim_end = .; /* define a global symbols at end of spim */
} >SPIM
/* Uninitialized data section */
. = ALIGN(4);
.bss :

14
libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xC_FLASH.ld
View File

@@ -33,6 +33,7 @@ MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K
SPIM (rx) : ORIGIN = 0x08400000, LENGTH = 16384K
}
/* Define output sections */
@@ -115,6 +116,19 @@ SECTIONS
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
_spim_init_base = LOADADDR(.spim);
_spim_init_length = SIZEOF(.spim);
.spim :
{
. = ALIGN(4);
_spim_start = .; /* create a global symbol at spim start */
*(.spim) /* .spim sections */
*(.spim*) /* .spim* sections */
. = ALIGN(4);
_spim_end = .; /* define a global symbols at end of spim */
} >SPIM
/* Uninitialized data section */
. = ALIGN(4);
.bss :

0
libraries/ReleaseNotes_AT32F413_Firmware_Library_Drivers.pdf → libraries/drivers/ReleaseNotes_AT32F413_Firmware_Library_Drivers.pdf
View File

2
libraries/drivers/inc/at32f413_tmr.h
View File

@@ -236,7 +236,7 @@ typedef enum
{
TMR_CC_CHANNEL_MAPPED_DIRECT = 0x01, /*!< channel is configured as input, mapped direct */
TMR_CC_CHANNEL_MAPPED_INDIRECT = 0x02, /*!< channel is configured as input, mapped indirect */
TMR_CC_CHANNEL_MAPPED_STI = 0x03 /*!< channel is configured as input, mapped trc */
TMR_CC_CHANNEL_MAPPED_STI = 0x03 /*!< channel is configured as input, mapped sti */
} tmr_input_direction_mapped_type;
/**

5
project/at_start_f413/examples/acc/calibration/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/acc/calibration/mdk_v5/calibration.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

17
project/at_start_f413/examples/acc/calibration/mdk_v5/calibration.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -514,4 +514,19 @@
<files/>
</RTE>
<LayerInfo>
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>
</Layers>
</LayerInfo>
</Project>

5
project/at_start_f413/examples/adc/combine_mode_ordinary_simult/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/combine_mode_ordinary_simult/mdk_v5/combine_mode_ordinary_simult.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/combine_mode_ordinary_simult/mdk_v5/combine_mode_ordinary_simult.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/current_vref_value_check/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/current_vref_value_check/mdk_v5/current_vref_value_check.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/current_vref_value_check/mdk_v5/current_vref_value_check.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/exint_trigger_partitioned/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/exint_trigger_partitioned/mdk_v5/exint_trigger_partitioned.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/exint_trigger_partitioned/mdk_v5/exint_trigger_partitioned.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -488,6 +488,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/internal_temperature_sensor/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/internal_temperature_sensor/mdk_v5/internal_temperature_sensor.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/internal_temperature_sensor/mdk_v5/internal_temperature_sensor.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/mdk_v5/repeat_conversion_loop_transfer.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/mdk_v5/repeat_conversion_loop_transfer.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/software_trigger_repeat/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/software_trigger_repeat/mdk_v5/software_trigger_repeat.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/software_trigger_repeat/mdk_v5/software_trigger_repeat.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/mdk_v5/tmr_trigger_automatic_preempted.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/mdk_v5/tmr_trigger_automatic_preempted.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -488,6 +488,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/adc/voltage_monitoring/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/adc/voltage_monitoring/mdk_v5/voltage_monitoring.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/adc/voltage_monitoring/mdk_v5/voltage_monitoring.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/bpr/bpr_data/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/bpr/bpr_data/mdk_v5/bpr_data.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/bpr/bpr_data/mdk_v5/bpr_data.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/bpr/tamper/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/bpr/tamper/mdk_v5/tamper.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/bpr/tamper/mdk_v5/tamper.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/can/communication_mode/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/can/communication_mode/mdk_v5/communication_mode.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

17
project/at_start_f413/examples/can/communication_mode/mdk_v5/communication_mode.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -474,4 +474,19 @@
<files/>
</RTE>
<LayerInfo>
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>
</Layers>
</LayerInfo>
</Project>

5
project/at_start_f413/examples/can/filter/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/can/filter/mdk_v5/filter.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/can/filter/mdk_v5/filter.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/can/loopback_mode/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/can/loopback_mode/mdk_v5/loopback_mode.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/can/loopback_mode/mdk_v5/loopback_mode.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/cortex_m4/bit_band/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/cortex_m4/bit_band/mdk_v5/bit_band.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/cortex_m4/bit_band/mdk_v5/bit_band.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/cortex_m4/cmsis_dsp/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/cortex_m4/cmsis_dsp/mdk_v5/cmsis_dsp.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/cortex_m4/cmsis_dsp/mdk_v5/cmsis_dsp.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -543,6 +543,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/cortex_m4/fpu/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/cortex_m4/fpu/mdk_v5/fpu.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/cortex_m4/fpu/mdk_v5/fpu.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -938,6 +938,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/cortex_m4/systick_interrupt/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/cortex_m4/systick_interrupt/mdk_v5/systick_interrupt.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/cortex_m4/systick_interrupt/mdk_v5/systick_interrupt.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/crc/calculation/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/crc/calculation/mdk_v5/calculation.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/crc/calculation/mdk_v5/calculation.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/crm/clock_failure_detection/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/crm/clock_failure_detection/mdk_v5/clock_failure_detection.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/crm/clock_failure_detection/mdk_v5/clock_failure_detection.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/crm/sysclk_switch/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/crm/sysclk_switch/mdk_v5/sysclk_switch.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/crm/sysclk_switch/mdk_v5/sysclk_switch.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/debug/tmr1/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/debug/tmr1/mdk_v5/tmr1.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/debug/tmr1/mdk_v5/tmr1.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/dma/data_to_gpio_flexible/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/dma/data_to_gpio_flexible/mdk_v5/data_to_gpio_flexible.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/dma/data_to_gpio_flexible/mdk_v5/data_to_gpio_flexible.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/dma/flash_to_sram/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/dma/flash_to_sram/mdk_v5/flash_to_sram.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/dma/flash_to_sram/mdk_v5/flash_to_sram.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/exint/exint_config/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/exint/exint_config/mdk_v5/exint_config.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/exint/exint_config/mdk_v5/exint_config.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/exint/exint_software_trigger/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/exint/exint_software_trigger/mdk_v5/exint_software_trigger.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/exint/exint_software_trigger/mdk_v5/exint_software_trigger.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/flash/fap_enable/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/flash/fap_enable/mdk_v5/fap_enable.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/flash/fap_enable/mdk_v5/fap_enable.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>fap_enable</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/flash/flash_write_read/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/flash/flash_write_read/mdk_v5/flash_write_read.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f413/examples/flash/flash_write_read/mdk_v5/flash_write_read.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

5
project/at_start_f413/examples/flash/operate_spim/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/flash/operate_spim/mdk_v5/operate_spim.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

17
project/at_start_f413/examples/flash/operate_spim/mdk_v5/operate_spim.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -479,4 +479,19 @@
<files/>
</RTE>
<LayerInfo>
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>
</Layers>
</LayerInfo>
</Project>

5
project/at_start_f413/examples/flash/run_in_spim/inc/at32f413_conf.h
View File

@@ -46,8 +46,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f413/examples/flash/run_in_spim/mdk_v5/run_in_spim.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

17
project/at_start_f413/examples/flash/run_in_spim/mdk_v5/run_in_spim.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F413RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -530,4 +530,19 @@
<files/>
</RTE>
<LayerInfo>
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>
</Layers>
</LayerInfo>
</Project>

Some files were not shown because too many files have changed in this diff Show More