update version to v2.0.9

libraries/cmsis/cm4/device_support/at32f413.h

@@ -101,7 +101,7 @@ extern "C" {
   */
 #define __AT32F413_LIBRARY_VERSION_MAJOR    (0x02) /*!< [31:24] major version */
 #define __AT32F413_LIBRARY_VERSION_MIDDLE   (0x00) /*!< [23:16] middle version */
-#define __AT32F413_LIBRARY_VERSION_MINOR    (0x08) /*!< [15:8]  minor version */
+#define __AT32F413_LIBRARY_VERSION_MINOR    (0x09) /*!< [15:8]  minor version */
 #define __AT32F413_LIBRARY_VERSION_RC       (0x00) /*!< [7:0]  release candidate */
 #define __AT32F413_LIBRARY_VERSION          ((__AT32F413_LIBRARY_VERSION_MAJOR << 24)  | \
                                              (__AT32F413_LIBRARY_VERSION_MIDDLE << 16) | \

libraries/cmsis/cm4/device_support/at32f413_conf_template.h

@@ -45,8 +45,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413x8_FLASH.ld

@@ -33,6 +33,7 @@ MEMORY
 {
 FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 64K
 RAM (xrw)       : ORIGIN = 0x20000000, LENGTH = 32K
+SPIM (rx)       : ORIGIN = 0x08400000, LENGTH = 16384K
 }
 
 /* Define output sections */
@@ -115,6 +116,19 @@ SECTIONS
     _edata = .;        /* define a global symbol at data end */
   } >RAM AT> FLASH
 
+  _spim_init_base = LOADADDR(.spim);
+  _spim_init_length = SIZEOF(.spim);
+  
+  .spim :
+  {
+    . = ALIGN(4);
+    _spim_start = .;        /* create a global symbol at spim start */
+    *(.spim)                /* .spim sections */
+    *(.spim*)               /* .spim* sections */
+    . = ALIGN(4);
+    _spim_end = .;         /* define a global symbols at end of spim */
+  } >SPIM
+
   /* Uninitialized data section */
   . = ALIGN(4);
   .bss :

libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xB_FLASH.ld

@@ -33,6 +33,7 @@ MEMORY
 {
 FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 128K
 RAM (xrw)       : ORIGIN = 0x20000000, LENGTH = 32K
+SPIM (rx)       : ORIGIN = 0x08400000, LENGTH = 16384K
 }
 
 /* Define output sections */
@@ -115,6 +116,19 @@ SECTIONS
     _edata = .;        /* define a global symbol at data end */
   } >RAM AT> FLASH
 
+  _spim_init_base = LOADADDR(.spim);
+  _spim_init_length = SIZEOF(.spim);
+  
+  .spim :
+  {
+    . = ALIGN(4);
+    _spim_start = .;        /* create a global symbol at spim start */
+    *(.spim)                /* .spim sections */
+    *(.spim*)               /* .spim* sections */
+    . = ALIGN(4);
+    _spim_end = .;         /* define a global symbols at end of spim */
+  } >SPIM
+
   /* Uninitialized data section */
   . = ALIGN(4);
   .bss :

libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xC_FLASH.ld

@@ -33,6 +33,7 @@ MEMORY
 {
 FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 256K
 RAM (xrw)       : ORIGIN = 0x20000000, LENGTH = 32K
+SPIM (rx)       : ORIGIN = 0x08400000, LENGTH = 16384K
 }
 
 /* Define output sections */
@@ -115,6 +116,19 @@ SECTIONS
     _edata = .;        /* define a global symbol at data end */
   } >RAM AT> FLASH
 
+  _spim_init_base = LOADADDR(.spim);
+  _spim_init_length = SIZEOF(.spim);
+  
+  .spim :
+  {
+    . = ALIGN(4);
+    _spim_start = .;        /* create a global symbol at spim start */
+    *(.spim)                /* .spim sections */
+    *(.spim*)               /* .spim* sections */
+    . = ALIGN(4);
+    _spim_end = .;         /* define a global symbols at end of spim */
+  } >SPIM
+
   /* Uninitialized data section */
   . = ALIGN(4);
   .bss :

libraries/drivers/inc/at32f413_tmr.h

@@ -236,7 +236,7 @@ typedef enum
 {
   TMR_CC_CHANNEL_MAPPED_DIRECT           = 0x01, /*!< channel is configured as input, mapped direct */
   TMR_CC_CHANNEL_MAPPED_INDIRECT         = 0x02, /*!< channel is configured as input, mapped indirect */
-  TMR_CC_CHANNEL_MAPPED_STI              = 0x03  /*!< channel is configured as input, mapped trc */
+  TMR_CC_CHANNEL_MAPPED_STI              = 0x03  /*!< channel is configured as input, mapped sti */
 } tmr_input_direction_mapped_type;
 
 /**

project/at_start_f413/examples/acc/calibration/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/acc/calibration/mdk_v5/calibration.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/acc/calibration/mdk_v5/calibration.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -514,4 +514,19 @@
     <files/>
   </RTE>
 
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
 </Project>

project/at_start_f413/examples/adc/combine_mode_ordinary_simult/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/combine_mode_ordinary_simult/mdk_v5/combine_mode_ordinary_simult.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/combine_mode_ordinary_simult/mdk_v5/combine_mode_ordinary_simult.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/current_vref_value_check/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/current_vref_value_check/mdk_v5/current_vref_value_check.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/current_vref_value_check/mdk_v5/current_vref_value_check.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/exint_trigger_partitioned/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/exint_trigger_partitioned/mdk_v5/exint_trigger_partitioned.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/exint_trigger_partitioned/mdk_v5/exint_trigger_partitioned.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -488,6 +488,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/internal_temperature_sensor/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/internal_temperature_sensor/mdk_v5/internal_temperature_sensor.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/internal_temperature_sensor/mdk_v5/internal_temperature_sensor.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/mdk_v5/repeat_conversion_loop_transfer.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/mdk_v5/repeat_conversion_loop_transfer.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/software_trigger_repeat/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/software_trigger_repeat/mdk_v5/software_trigger_repeat.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/software_trigger_repeat/mdk_v5/software_trigger_repeat.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/mdk_v5/tmr_trigger_automatic_preempted.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/mdk_v5/tmr_trigger_automatic_preempted.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -488,6 +488,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/adc/voltage_monitoring/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/adc/voltage_monitoring/mdk_v5/voltage_monitoring.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/adc/voltage_monitoring/mdk_v5/voltage_monitoring.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/bpr/bpr_data/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/bpr/bpr_data/mdk_v5/bpr_data.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/bpr/bpr_data/mdk_v5/bpr_data.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/bpr/tamper/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/bpr/tamper/mdk_v5/tamper.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/bpr/tamper/mdk_v5/tamper.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/can/communication_mode/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/can/communication_mode/mdk_v5/communication_mode.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/can/communication_mode/mdk_v5/communication_mode.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -474,4 +474,19 @@
     <files/>
   </RTE>
 
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
 </Project>

project/at_start_f413/examples/can/filter/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/can/filter/mdk_v5/filter.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/can/filter/mdk_v5/filter.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -478,6 +478,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/can/loopback_mode/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/can/loopback_mode/mdk_v5/loopback_mode.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/can/loopback_mode/mdk_v5/loopback_mode.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -478,6 +478,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/cortex_m4/bit_band/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/cortex_m4/bit_band/mdk_v5/bit_band.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/cortex_m4/bit_band/mdk_v5/bit_band.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -473,6 +473,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/cortex_m4/cmsis_dsp/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/cortex_m4/cmsis_dsp/mdk_v5/cmsis_dsp.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/cortex_m4/cmsis_dsp/mdk_v5/cmsis_dsp.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -543,6 +543,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/cortex_m4/fpu/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/cortex_m4/fpu/mdk_v5/fpu.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/cortex_m4/fpu/mdk_v5/fpu.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -938,6 +938,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/cortex_m4/systick_interrupt/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/cortex_m4/systick_interrupt/mdk_v5/systick_interrupt.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/cortex_m4/systick_interrupt/mdk_v5/systick_interrupt.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -473,6 +473,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/crc/calculation/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/crc/calculation/mdk_v5/calculation.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/crc/calculation/mdk_v5/calculation.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -478,6 +478,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/crm/clock_failure_detection/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/crm/clock_failure_detection/mdk_v5/clock_failure_detection.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/crm/clock_failure_detection/mdk_v5/clock_failure_detection.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -473,6 +473,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/crm/sysclk_switch/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/crm/sysclk_switch/mdk_v5/sysclk_switch.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/crm/sysclk_switch/mdk_v5/sysclk_switch.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -473,6 +473,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/debug/tmr1/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/debug/tmr1/mdk_v5/tmr1.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/debug/tmr1/mdk_v5/tmr1.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/dma/data_to_gpio_flexible/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/dma/data_to_gpio_flexible/mdk_v5/data_to_gpio_flexible.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/dma/data_to_gpio_flexible/mdk_v5/data_to_gpio_flexible.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/dma/flash_to_sram/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/dma/flash_to_sram/mdk_v5/flash_to_sram.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/dma/flash_to_sram/mdk_v5/flash_to_sram.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/exint/exint_config/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/exint/exint_config/mdk_v5/exint_config.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/exint/exint_config/mdk_v5/exint_config.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -478,6 +478,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/exint/exint_software_trigger/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/exint/exint_software_trigger/mdk_v5/exint_software_trigger.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/exint/exint_software_trigger/mdk_v5/exint_software_trigger.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/flash/fap_enable/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/flash/fap_enable/mdk_v5/fap_enable.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/flash/fap_enable/mdk_v5/fap_enable.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -478,6 +478,11 @@
     <Layers>
       <Layer>
         <LayName>fap_enable</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/flash/flash_write_read/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/flash/flash_write_read/mdk_v5/flash_write_read.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/flash/flash_write_read/mdk_v5/flash_write_read.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -483,6 +483,11 @@
     <Layers>
       <Layer>
         <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
         <LayTarg>0</LayTarg>
         <LayPrjMark>1</LayPrjMark>
       </Layer>

project/at_start_f413/examples/flash/operate_spim/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/flash/operate_spim/mdk_v5/operate_spim.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/flash/operate_spim/mdk_v5/operate_spim.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -479,4 +479,19 @@
     <files/>
   </RTE>
 
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
 </Project>

project/at_start_f413/examples/flash/run_in_spim/inc/at32f413_conf.h

@@ -46,8 +46,9 @@ extern "C" {
   * @brief in the following line adjust the high speed exernal crystal (hext) startup
   * timeout value
   */
-#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
-#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed exernal clock in hz */
 
 /* module define -------------------------------------------------------------*/
 #define CRM_MODULE_ENABLED

project/at_start_f413/examples/flash/run_in_spim/mdk_v5/run_in_spim.uvoptx

@@ -10,9 +10,9 @@
     <aExt>*.s*; *.src; *.a*</aExt>
     <oExt>*.obj; *.o</oExt>
     <lExt>*.lib</lExt>
-    <tExt>*.txt; *.h; *.inc; *.md</tExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
     <pExt>*.plm</pExt>
-    <CppX>*.cpp; *.cc; *.cxx</CppX>
+    <CppX>*.cpp</CppX>
     <nMigrate>0</nMigrate>
   </Extensions>
 

project/at_start_f413/examples/flash/run_in_spim/mdk_v5/run_in_spim.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>-AT32F413RCT7</Device>
           <Vendor>ArteryTek</Vendor>
-          <PackID>ArteryTek.AT32F413_DFP.2.0.6</PackID>
+          <PackID>ArteryTek.AT32F413_DFP.2.0.0</PackID>
           <Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -530,4 +530,19 @@
     <files/>
   </RTE>
 
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>&lt;Project Info&gt;</LayName>
+        <LayDesc></LayDesc>
+        <LayUrl></LayUrl>
+        <LayKeys></LayKeys>
+        <LayCat></LayCat>
+        <LayLic></LayLic>
+        <LayTarg>0</LayTarg>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
 </Project>