yemai/AT32F413_Firmware_Library
1
0
Fork 0
mirror of https://github.com/ArteryTek/AT32F413_Firmware_Library.git synced 2026-05-21 09:22:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

update version to v2.1.1

Browse Source
This commit is contained in:
Artery-MCU
2023-10-30 11:23:18 +08:00
parent fb61391d00
commit 35a0cb1069
177 changed files with 1191 additions and 14036 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
project/at_start_f413/examples/acc/calibration/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/combine_mode_ordinary_simult/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/current_vref_value_check/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/exint_trigger_partitioned/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/internal_temperature_sensor/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/repeat_conversion_loop_transfer/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/software_trigger_repeat/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/tmr_trigger_automatic_preempted/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/adc/voltage_monitoring/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/bpr/bpr_data/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/bpr/tamper/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/can/communication_mode/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/can/filter/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/can/loopback_mode/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/cortex_m4/bit_band/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/cortex_m4/cmsis_dsp/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/cortex_m4/fpu/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/cortex_m4/systick_interrupt/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/crc/calculation/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/crm/clock_failure_detection/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/crm/sysclk_switch/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/debug/tmr1/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/dma/data_to_gpio_flexible/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/dma/flash_to_sram/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/exint/exint_config/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/exint/exint_software_trigger/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/flash/fap_enable/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/flash/flash_write_read/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/flash/operate_spim/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/flash/run_in_spim/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/gpio/io_toggle/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/gpio/led_toggle/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/gpio/swjtag_remap/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2c/communication_dma/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2c/communication_int/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2c/communication_poll/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2c/eeprom/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2s/halfduplex_dma/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2s/halfduplex_interrupt/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/i2s/spii2s_switch_halfduplex_polling/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/pwc/deepsleep_rtc/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/pwc/power_voltage_monitor/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/pwc/sleep_tmr2/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/pwc/sleep_usart1/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/pwc/standby_rtc/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/pwc/standby_wakeup_pin/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

5
project/at_start_f413/examples/pwc/standby_wakeup_pin/readme.txt
View File

@@ -6,6 +6,7 @@
*/
this demo is based on the at-start board, in this demo, shows how to exit
standby mode by wake-up pin.
standby mode by wake-up pin.
for more detailed information. please refer to the application note document AN0100.
for more detailed information. please refer to the application note document AN0100.

2
project/at_start_f413/examples/pwc/standby_wakeup_pin/src/main.c
View File

@@ -79,7 +79,7 @@ int main(void)
/*delay to check led status*/
delay_ms(1000);
/* enable wakeup pin - pa0 */
/* enable wakeup pin */
pwc_wakeup_pin_enable(PWC_WAKEUP_PIN_1, TRUE);
/* enter standby mode */

8
project/at_start_f413/examples/rtc/calendar/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/rtc/lick_calibration/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/sdio/sd_mmc_card/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

2
project/at_start_f413/examples/sdio/sd_mmc_card/readme.txt
View File

@@ -9,7 +9,7 @@
sd card test: init, erase, single block r/w, multiple blocks r/w.
mmc card test:init, erase, single block r/w, multiple blocks r/w, stream data r/w.
sdio1 at32f403a sd/mmc card
sdio1 sd/mmc card
- sdio1_d0 pc8 ---> dat0
- sdio1_d1 pc9 ---> dat1
- sdio1_d2 pc10 ---> dat2

8
project/at_start_f413/examples/sdio/sdio_fatfs/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

2
project/at_start_f413/examples/sdio/sdio_fatfs/readme.txt
View File

@@ -8,7 +8,7 @@
this demo is based on the at-start board, in this demo, sdio1 to manage
test FatFs R0.14b.
sdio1 at32f403a sd/mmc card
sdio1 sd/mmc card
- sdio1_d0 pc8 ---> dat0
- sdio1_d1 pc9 ---> dat1
- sdio1_d2 pc10 ---> dat2

8
project/at_start_f413/examples/spi/crc_transfer_polling/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/spi/fullduplex_polling/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/spi/halfduplex_interrupt/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/spi/halfduplex_transceiver_switch/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/spi/only_receive_mode_polling/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/spi/use_jtagpin_hardwarecs_dma/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/spi/w25q_flash/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4360
project/at_start_f413/examples/sram/extend_sram/iar_v8.2/extend_sram.ewd
View File

File diff suppressed because it is too large Load Diff

3130
project/at_start_f413/examples/sram/extend_sram/iar_v8.2/extend_sram.ewp
View File

File diff suppressed because it is too large Load Diff

2427
project/at_start_f413/examples/sram/extend_sram/iar_v8.2/extend_sram.ewt
View File

File diff suppressed because it is too large Load Diff

23
project/at_start_f413/examples/sram/extend_sram/iar_v8.2/extend_sram.eww
View File

@@ -1,23 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<workspace>
<project>
<path>$WS_DIR$\extend_sram.ewp</path>
</project>
<batchBuild>
<batchDefinition>
<name>all</name>
<member>
<project>extend_sram</project>
<configuration>extend_sram_16k</configuration>
</member>
<member>
<project>extend_sram</project>
<configuration>extend_sram_32k</configuration>
</member>
<member>
<project>extend_sram</project>
<configuration>extend_sram_64k</configuration>
</member>
</batchDefinition>
</batchBuild>
</workspace>

505
project/at_start_f413/examples/sram/extend_sram/iar_v8.2/startup_at32f413_ext_ram.s
View File

@@ -1,505 +0,0 @@
;**************************************************************************
;* @file startup_at32f413.s
;* @brief at32f413 startup file for IAR Systems
;**************************************************************************
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
EXTERN extend_sram
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDT_IRQHandler ; Window Watchdog Timer
DCD PVM_IRQHandler ; PVM through EXINT Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD CRM_IRQHandler ; CRM
DCD EXINT0_IRQHandler ; EXINT Line 0
DCD EXINT1_IRQHandler ; EXINT Line 1
DCD EXINT2_IRQHandler ; EXINT Line 2
DCD EXINT3_IRQHandler ; EXINT Line 3
DCD EXINT4_IRQHandler ; EXINT Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USBFS_H_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USBFS_L_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SE_IRQHandler ; CAN1 SE
DCD EXINT9_5_IRQHandler ; EXINT Line [9:5]
DCD TMR1_BRK_TMR9_IRQHandler ; TMR1 Brake and TMR9
DCD TMR1_OVF_TMR10_IRQHandler ; TMR1 Overflow and TMR10
DCD TMR1_TRG_HALL_TMR11_IRQHandler ; TMR1 Trigger and hall and TMR11
DCD TMR1_CH_IRQHandler ; TMR1 Channel
DCD TMR2_GLOBAL_IRQHandler ; TMR2
DCD TMR3_GLOBAL_IRQHandler ; TMR3
DCD TMR4_GLOBAL_IRQHandler ; TMR4
DCD I2C1_EVT_IRQHandler ; I2C1 Event
DCD I2C1_ERR_IRQHandler ; I2C1 Error
DCD I2C2_EVT_IRQHandler ; I2C2 Event
DCD I2C2_ERR_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXINT15_10_IRQHandler ; EXINT Line [15:10]
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXINT Line
DCD USBFSWakeUp_IRQHandler ; USB Wakeup from suspend
DCD TMR8_BRK_IRQHandler ; TMR8 Brake
DCD TMR8_OVF_IRQHandler ; TMR8 Overflow
DCD TMR8_TRG_HALL_IRQHandler ; TMR8 Trigger and hall
DCD TMR8_CH_IRQHandler ; TMR8 Channel
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SDIO1_IRQHandler ; SDIO1
DCD TMR5_GLOBAL_IRQHandler ; TMR5
DCD 0 ; Reserved
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CAN2_TX_IRQHandler ; CAN2 TX
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
DCD CAN2_SE_IRQHandler ; CAN2 SE
DCD ACC_IRQHandler ; ACC
DCD USBFS_MAPH_IRQHandler ; USB Map HP
DCD USBFS_MAPL_IRQHandler ; USB Map LP
DCD DMA2_Channel6_7_IRQHandler ; DMA2 Channel6 & Channel7
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER:NOROOT(2)
Reset_Handler
; add for extend sram
MOV32 R0, #0x20001000
MOV SP, R0
LDR R0, =extend_sram
BLX R0
MOV32 R0, #0x08000000
LDR SP, [R0]
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDT_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
WWDT_IRQHandler
B WWDT_IRQHandler
PUBWEAK PVM_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
PVM_IRQHandler
B PVM_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK CRM_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CRM_IRQHandler
B CRM_IRQHandler
PUBWEAK EXINT0_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT0_IRQHandler
B EXINT0_IRQHandler
PUBWEAK EXINT1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT1_IRQHandler
B EXINT1_IRQHandler
PUBWEAK EXINT2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT2_IRQHandler
B EXINT2_IRQHandler
PUBWEAK EXINT3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT3_IRQHandler
B EXINT3_IRQHandler
PUBWEAK EXINT4_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT4_IRQHandler
B EXINT4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USBFS_H_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USBFS_H_CAN1_TX_IRQHandler
B USBFS_H_CAN1_TX_IRQHandler
PUBWEAK USBFS_L_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USBFS_L_CAN1_RX0_IRQHandler
B USBFS_L_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SE_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN1_SE_IRQHandler
B CAN1_SE_IRQHandler
PUBWEAK EXINT9_5_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT9_5_IRQHandler
B EXINT9_5_IRQHandler
PUBWEAK TMR1_BRK_TMR9_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR1_BRK_TMR9_IRQHandler
B TMR1_BRK_TMR9_IRQHandler
PUBWEAK TMR1_OVF_TMR10_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR1_OVF_TMR10_IRQHandler
B TMR1_OVF_TMR10_IRQHandler
PUBWEAK TMR1_TRG_HALL_TMR11_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR1_TRG_HALL_TMR11_IRQHandler
B TMR1_TRG_HALL_TMR11_IRQHandler
PUBWEAK TMR1_CH_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR1_CH_IRQHandler
B TMR1_CH_IRQHandler
PUBWEAK TMR2_GLOBAL_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR2_GLOBAL_IRQHandler
B TMR2_GLOBAL_IRQHandler
PUBWEAK TMR3_GLOBAL_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR3_GLOBAL_IRQHandler
B TMR3_GLOBAL_IRQHandler
PUBWEAK TMR4_GLOBAL_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR4_GLOBAL_IRQHandler
B TMR4_GLOBAL_IRQHandler
PUBWEAK I2C1_EVT_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C1_EVT_IRQHandler
B I2C1_EVT_IRQHandler
PUBWEAK I2C1_ERR_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C1_ERR_IRQHandler
B I2C1_ERR_IRQHandler
PUBWEAK I2C2_EVT_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C2_EVT_IRQHandler
B I2C2_EVT_IRQHandler
PUBWEAK I2C2_ERR_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C2_ERR_IRQHandler
B I2C2_ERR_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXINT15_10_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXINT15_10_IRQHandler
B EXINT15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK USBFSWakeUp_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USBFSWakeUp_IRQHandler
B USBFSWakeUp_IRQHandler
PUBWEAK TMR8_BRK_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR8_BRK_IRQHandler
B TMR8_BRK_IRQHandler
PUBWEAK TMR8_OVF_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR8_OVF_IRQHandler
B TMR8_OVF_IRQHandler
PUBWEAK TMR8_TRG_HALL_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR8_TRG_HALL_IRQHandler
B TMR8_TRG_HALL_IRQHandler
PUBWEAK TMR8_CH_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR8_CH_IRQHandler
B TMR8_CH_IRQHandler
PUBWEAK SDIO1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
SDIO1_IRQHandler
B SDIO1_IRQHandler
PUBWEAK TMR5_GLOBAL_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TMR5_GLOBAL_IRQHandler
B TMR5_GLOBAL_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_5_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA2_Channel4_5_IRQHandler
B DMA2_Channel4_5_IRQHandler
PUBWEAK CAN2_TX_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN2_TX_IRQHandler
B CAN2_TX_IRQHandler
PUBWEAK CAN2_RX0_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN2_RX0_IRQHandler
B CAN2_RX0_IRQHandler
PUBWEAK CAN2_RX1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN2_RX1_IRQHandler
B CAN2_RX1_IRQHandler
PUBWEAK CAN2_SE_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN2_SE_IRQHandler
B CAN2_SE_IRQHandler
PUBWEAK ACC_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
ACC_IRQHandler
B ACC_IRQHandler
PUBWEAK USBFS_MAPH_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USBFS_MAPH_IRQHandler
B USBFS_MAPH_IRQHandler
PUBWEAK USBFS_MAPL_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USBFS_MAPL_IRQHandler
B USBFS_MAPL_IRQHandler
PUBWEAK DMA2_Channel6_7_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA2_Channel6_7_IRQHandler
B DMA2_Channel6_7_IRQHandler
END

44
project/at_start_f413/examples/sram/extend_sram/inc/at32f413_clock.h
View File

@@ -1,44 +0,0 @@
/**
**************************************************************************
* @file at32f413_clock.h
* @brief header file of clock program
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
/* define to prevent recursive inclusion -------------------------------------*/
#ifndef __AT32F413_CLOCK_H
#define __AT32F413_CLOCK_H
#ifdef __cplusplus
extern "C" {
#endif
/* includes ------------------------------------------------------------------*/
#include "at32f413.h"
/* exported functions ------------------------------------------------------- */
void system_clock_config(void);
#ifdef __cplusplus
}
#endif
#endif /* __AT32F413_CLOCK_H */

157
project/at_start_f413/examples/sram/extend_sram/inc/at32f413_conf.h
View File

@@ -1,157 +0,0 @@
/**
**************************************************************************
* @file at32f413_conf.h
* @brief at32f413 config header file
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
/* define to prevent recursive inclusion -------------------------------------*/
#ifndef __AT32F413_CONF_H
#define __AT32F413_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
* can define the hext value in your toolchain compiler preprocessor.
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED
#define TMR_MODULE_ENABLED
#define RTC_MODULE_ENABLED
#define BPR_MODULE_ENABLED
#define GPIO_MODULE_ENABLED
#define I2C_MODULE_ENABLED
#define USART_MODULE_ENABLED
#define PWC_MODULE_ENABLED
#define CAN_MODULE_ENABLED
#define ADC_MODULE_ENABLED
#define SPI_MODULE_ENABLED
#define DMA_MODULE_ENABLED
#define DEBUG_MODULE_ENABLED
#define FLASH_MODULE_ENABLED
#define CRC_MODULE_ENABLED
#define WWDT_MODULE_ENABLED
#define WDT_MODULE_ENABLED
#define EXINT_MODULE_ENABLED
#define SDIO_MODULE_ENABLED
#define USB_MODULE_ENABLED
#define ACC_MODULE_ENABLED
#define MISC_MODULE_ENABLED
/* includes ------------------------------------------------------------------*/
#ifdef CRM_MODULE_ENABLED
#include "at32f413_crm.h"
#endif
#ifdef TMR_MODULE_ENABLED
#include "at32f413_tmr.h"
#endif
#ifdef RTC_MODULE_ENABLED
#include "at32f413_rtc.h"
#endif
#ifdef BPR_MODULE_ENABLED
#include "at32f413_bpr.h"
#endif
#ifdef GPIO_MODULE_ENABLED
#include "at32f413_gpio.h"
#endif
#ifdef I2C_MODULE_ENABLED
#include "at32f413_i2c.h"
#endif
#ifdef USART_MODULE_ENABLED
#include "at32f413_usart.h"
#endif
#ifdef PWC_MODULE_ENABLED
#include "at32f413_pwc.h"
#endif
#ifdef CAN_MODULE_ENABLED
#include "at32f413_can.h"
#endif
#ifdef ADC_MODULE_ENABLED
#include "at32f413_adc.h"
#endif
#ifdef SPI_MODULE_ENABLED
#include "at32f413_spi.h"
#endif
#ifdef DMA_MODULE_ENABLED
#include "at32f413_dma.h"
#endif
#ifdef DEBUG_MODULE_ENABLED
#include "at32f413_debug.h"
#endif
#ifdef FLASH_MODULE_ENABLED
#include "at32f413_flash.h"
#endif
#ifdef CRC_MODULE_ENABLED
#include "at32f413_crc.h"
#endif
#ifdef WWDT_MODULE_ENABLED
#include "at32f413_wwdt.h"
#endif
#ifdef WDT_MODULE_ENABLED
#include "at32f413_wdt.h"
#endif
#ifdef EXINT_MODULE_ENABLED
#include "at32f413_exint.h"
#endif
#ifdef SDIO_MODULE_ENABLED
#include "at32f413_sdio.h"
#endif
#ifdef ACC_MODULE_ENABLED
#include "at32f413_acc.h"
#endif
#ifdef MISC_MODULE_ENABLED
#include "at32f413_misc.h"
#endif
#ifdef USB_MODULE_ENABLED
#include "at32f413_usb.h"
#endif
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif

56
project/at_start_f413/examples/sram/extend_sram/inc/at32f413_int.h
View File

@@ -1,56 +0,0 @@
/**
**************************************************************************
* @file at32f413_int.h
* @brief header file of main interrupt service routines.
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
/* define to prevent recursive inclusion -------------------------------------*/
#ifndef __AT32F413_INT_H
#define __AT32F413_INT_H
#ifdef __cplusplus
extern "C" {
#endif
/* includes ------------------------------------------------------------------*/
#include "at32f413.h"
/* exported types ------------------------------------------------------------*/
/* exported constants --------------------------------------------------------*/
/* exported macro ------------------------------------------------------------*/
/* exported functions ------------------------------------------------------- */
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
#ifdef __cplusplus
}
#endif
#endif

638
project/at_start_f413/examples/sram/extend_sram/mdk_v5/extend_sram.uvoptx
View File

@@ -1,638 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
<SchemaVersion>1.0</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Extensions>
<cExt>*.c</cExt>
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>
<DaveTm>
<dwLowDateTime>0</dwLowDateTime>
<dwHighDateTime>0</dwHighDateTime>
</DaveTm>
<Target>
<TargetName>set_sram_64k</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<CLKADS>12000000</CLKADS>
<OPTTT>
<gFlags>0</gFlags>
<BeepAtEnd>1</BeepAtEnd>
<RunSim>0</RunSim>
<RunTarget>1</RunTarget>
<RunAbUc>0</RunAbUc>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
<FlashByte>65535</FlashByte>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
</OPTHX>
<OPTLEX>
<PageWidth>79</PageWidth>
<PageLength>66</PageLength>
<TabStop>8</TabStop>
<ListingPath>.\listings\</ListingPath>
</OPTLEX>
<ListingPage>
<CreateCListing>1</CreateCListing>
<CreateAListing>1</CreateAListing>
<CreateLListing>1</CreateLListing>
<CreateIListing>0</CreateIListing>
<AsmCond>1</AsmCond>
<AsmSymb>1</AsmSymb>
<AsmXref>0</AsmXref>
<CCond>1</CCond>
<CCode>0</CCode>
<CListInc>0</CListInc>
<CSymb>0</CSymb>
<LinkerCodeListing>0</LinkerCodeListing>
</ListingPage>
<OPTXL>
<LMap>1</LMap>
<LComments>1</LComments>
<LGenerateSymbols>1</LGenerateSymbols>
<LLibSym>1</LLibSym>
<LLines>1</LLines>
<LLocSym>1</LLocSym>
<LPubSym>1</LPubSym>
<LXref>0</LXref>
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
<CpuCode>0</CpuCode>
<DebugOpt>
<uSim>0</uSim>
<uTrg>1</uTrg>
<sLdApp>1</sLdApp>
<sGomain>1</sGomain>
<sRbreak>1</sRbreak>
<sRwatch>1</sRwatch>
<sRmem>1</sRmem>
<sRfunc>1</sRfunc>
<sRbox>1</sRbox>
<tLdApp>1</tLdApp>
<tGomain>1</tGomain>
<tRbreak>1</tRbreak>
<tRwatch>1</tRwatch>
<tRmem>1</tRmem>
<tRfunc>0</tRfunc>
<tRbox>1</tRbox>
<tRtrace>1</tRtrace>
<sRSysVw>1</sRSysVw>
<tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>0</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
<sDlgPa></sDlgPa>
<sIfile></sIfile>
<tDll></tDll>
<tDllPa></tDllPa>
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>UL2CM3</Key>
<Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0AT32F413_256 -FS08000000 -FL040000 -FP0($$Device:-AT32F413RCT7$Flash\AT32F413_256.FLM))</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint/>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
<DebugFlag>
<trace>0</trace>
<periodic>0</periodic>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>0</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
<StkLoc>0</StkLoc>
<TrcWin>0</TrcWin>
<newCpu>0</newCpu>
<uProt>0</uProt>
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
<Target>
<TargetName>set_sram_32k</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<CLKADS>12000000</CLKADS>
<OPTTT>
<gFlags>0</gFlags>
<BeepAtEnd>1</BeepAtEnd>
<RunSim>1</RunSim>
<RunTarget>0</RunTarget>
<RunAbUc>0</RunAbUc>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
<FlashByte>65535</FlashByte>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
</OPTHX>
<OPTLEX>
<PageWidth>79</PageWidth>
<PageLength>66</PageLength>
<TabStop>8</TabStop>
<ListingPath>.\listings\</ListingPath>
</OPTLEX>
<ListingPage>
<CreateCListing>1</CreateCListing>
<CreateAListing>1</CreateAListing>
<CreateLListing>1</CreateLListing>
<CreateIListing>0</CreateIListing>
<AsmCond>1</AsmCond>
<AsmSymb>1</AsmSymb>
<AsmXref>0</AsmXref>
<CCond>1</CCond>
<CCode>0</CCode>
<CListInc>0</CListInc>
<CSymb>0</CSymb>
<LinkerCodeListing>0</LinkerCodeListing>
</ListingPage>
<OPTXL>
<LMap>1</LMap>
<LComments>1</LComments>
<LGenerateSymbols>1</LGenerateSymbols>
<LLibSym>1</LLibSym>
<LLines>1</LLines>
<LLocSym>1</LLocSym>
<LPubSym>1</LPubSym>
<LXref>0</LXref>
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>0</IsCurrentTarget>
</OPTFL>
<CpuCode>0</CpuCode>
<DebugOpt>
<uSim>1</uSim>
<uTrg>0</uTrg>
<sLdApp>1</sLdApp>
<sGomain>1</sGomain>
<sRbreak>1</sRbreak>
<sRwatch>1</sRwatch>
<sRmem>1</sRmem>
<sRfunc>1</sRfunc>
<sRbox>1</sRbox>
<tLdApp>1</tLdApp>
<tGomain>0</tGomain>
<tRbreak>1</tRbreak>
<tRwatch>1</tRwatch>
<tRmem>1</tRmem>
<tRfunc>0</tRfunc>
<tRbox>1</tRbox>
<tRtrace>1</tRtrace>
<sRSysVw>1</sRSysVw>
<tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>-1</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
<sDlgPa></sDlgPa>
<sIfile></sIfile>
<tDll></tDll>
<tDllPa></tDllPa>
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<Breakpoint/>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
<DebugFlag>
<trace>0</trace>
<periodic>0</periodic>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>0</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
<StkLoc>0</StkLoc>
<TrcWin>0</TrcWin>
<newCpu>0</newCpu>
<uProt>0</uProt>
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
<Target>
<TargetName>set_sram_16k</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<CLKADS>12000000</CLKADS>
<OPTTT>
<gFlags>0</gFlags>
<BeepAtEnd>1</BeepAtEnd>
<RunSim>1</RunSim>
<RunTarget>0</RunTarget>
<RunAbUc>0</RunAbUc>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
<FlashByte>65535</FlashByte>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
</OPTHX>
<OPTLEX>
<PageWidth>79</PageWidth>
<PageLength>66</PageLength>
<TabStop>8</TabStop>
<ListingPath>.\listings\</ListingPath>
</OPTLEX>
<ListingPage>
<CreateCListing>1</CreateCListing>
<CreateAListing>1</CreateAListing>
<CreateLListing>1</CreateLListing>
<CreateIListing>0</CreateIListing>
<AsmCond>1</AsmCond>
<AsmSymb>1</AsmSymb>
<AsmXref>0</AsmXref>
<CCond>1</CCond>
<CCode>0</CCode>
<CListInc>0</CListInc>
<CSymb>0</CSymb>
<LinkerCodeListing>0</LinkerCodeListing>
</ListingPage>
<OPTXL>
<LMap>1</LMap>
<LComments>1</LComments>
<LGenerateSymbols>1</LGenerateSymbols>
<LLibSym>1</LLibSym>
<LLines>1</LLines>
<LLocSym>1</LLocSym>
<LPubSym>1</LPubSym>
<LXref>0</LXref>
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>0</IsCurrentTarget>
</OPTFL>
<CpuCode>0</CpuCode>
<DebugOpt>
<uSim>1</uSim>
<uTrg>0</uTrg>
<sLdApp>1</sLdApp>
<sGomain>1</sGomain>
<sRbreak>1</sRbreak>
<sRwatch>1</sRwatch>
<sRmem>1</sRmem>
<sRfunc>1</sRfunc>
<sRbox>1</sRbox>
<tLdApp>1</tLdApp>
<tGomain>0</tGomain>
<tRbreak>1</tRbreak>
<tRwatch>1</tRwatch>
<tRmem>1</tRmem>
<tRfunc>0</tRfunc>
<tRbox>1</tRbox>
<tRtrace>1</tRtrace>
<sRSysVw>1</sRSysVw>
<tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<bEvRecOn>1</bEvRecOn>
<bSchkAxf>0</bSchkAxf>
<bTchkAxf>0</bTchkAxf>
<nTsel>-1</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
<sDlgPa></sDlgPa>
<sIfile></sIfile>
<tDll></tDll>
<tDllPa></tDllPa>
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>BIN\CMSIS_AGDI.dll</pMon>
</DebugOpt>
<Breakpoint/>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
<DebugFlag>
<trace>0</trace>
<periodic>0</periodic>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>0</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
<StkLoc>0</StkLoc>
<TrcWin>0</TrcWin>
<newCpu>0</newCpu>
<uProt>0</uProt>
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
<bLintAuto>0</bLintAuto>
<bAutoGenD>0</bAutoGenD>
<LntExFlags>0</LntExFlags>
<pMisraName></pMisraName>
<pszMrule></pszMrule>
<pSingCmds></pSingCmds>
<pMultCmds></pMultCmds>
<pMisraNamep></pMisraNamep>
<pszMrulep></pszMrulep>
<pSingCmdsp></pSingCmdsp>
<pMultCmdsp></pMultCmdsp>
</TargetOption>
</Target>
<Group>
<GroupName>user</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>1</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\at32f413_clock.c</PathWithFileName>
<FilenameWithoutPath>at32f413_clock.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\at32f413_int.c</PathWithFileName>
<FilenameWithoutPath>at32f413_int.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\src\main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>bsp</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\at32f413_board\at32f413_board.c</PathWithFileName>
<FilenameWithoutPath>at32f413_board.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>firmware</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\..\libraries\drivers\src\at32f413_crm.c</PathWithFileName>
<FilenameWithoutPath>at32f413_crm.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\..\libraries\drivers\src\at32f413_usart.c</PathWithFileName>
<FilenameWithoutPath>at32f413_usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\..\libraries\drivers\src\at32f413_flash.c</PathWithFileName>
<FilenameWithoutPath>at32f413_flash.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\..\libraries\drivers\src\at32f413_gpio.c</PathWithFileName>
<FilenameWithoutPath>at32f413_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\..\libraries\drivers\src\at32f413_misc.c</PathWithFileName>
<FilenameWithoutPath>at32f413_misc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>cmsis</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\..\..\..\libraries\cmsis\cm4\device_support\system_at32f413.c</PathWithFileName>
<FilenameWithoutPath>system_at32f413.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\startup_at32f413_ext_ram.s</PathWithFileName>
<FilenameWithoutPath>startup_at32f413_ext_ram.s</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>readme</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>12</FileNumber>
<FileType>5</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\readme.txt</PathWithFileName>
<FilenameWithoutPath>readme.txt</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
</ProjectOpt>

1412
project/at_start_f413/examples/sram/extend_sram/mdk_v5/extend_sram.uvprojx
View File

File diff suppressed because it is too large Load Diff

365
project/at_start_f413/examples/sram/extend_sram/mdk_v5/startup_at32f413_ext_ram.s
View File

@@ -1,365 +0,0 @@
;**************************************************************************
;* @file startup_at32f403a_407.s
;* @brief at32f403a_407 startup file for keil
;**************************************************************************
;
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDT_IRQHandler ; Window Watchdog Timer
DCD PVM_IRQHandler ; PVM through EXINT Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD CRM_IRQHandler ; CRM
DCD EXINT0_IRQHandler ; EXINT Line 0
DCD EXINT1_IRQHandler ; EXINT Line 1
DCD EXINT2_IRQHandler ; EXINT Line 2
DCD EXINT3_IRQHandler ; EXINT Line 3
DCD EXINT4_IRQHandler ; EXINT Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USBFS_H_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USBFS_L_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SE_IRQHandler ; CAN1 SE
DCD EXINT9_5_IRQHandler ; EXINT Line [9:5]
DCD TMR1_BRK_TMR9_IRQHandler ; TMR1 Brake and TMR9
DCD TMR1_OVF_TMR10_IRQHandler ; TMR1 overflow and TMR10
DCD TMR1_TRG_HALL_TMR11_IRQHandler ; TMR1 Trigger and hall and TMR11
DCD TMR1_CH_IRQHandler ; TMR1 channel
DCD TMR2_GLOBAL_IRQHandler ; TMR2
DCD TMR3_GLOBAL_IRQHandler ; TMR3
DCD TMR4_GLOBAL_IRQHandler ; TMR4
DCD I2C1_EVT_IRQHandler ; I2C1 Event
DCD I2C1_ERR_IRQHandler ; I2C1 Error
DCD I2C2_EVT_IRQHandler ; I2C2 Event
DCD I2C2_ERR_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXINT15_10_IRQHandler ; EXINT Line [15:10]
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXINT Line
DCD USBFSWakeUp_IRQHandler ; USB Wakeup from suspend
DCD TMR8_BRK_IRQHandler ; TMR8 Brake
DCD TMR8_OVF_IRQHandler ; TMR8 overflow
DCD TMR8_TRG_HALL_IRQHandler ; TMR8 Trigger and hall
DCD TMR8_CH_IRQHandler ; TMR8 channel
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SDIO1_IRQHandler ; SDIO1
DCD TMR5_GLOBAL_IRQHandler ; TMR5
DCD 0 ; Reserved
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD CAN2_TX_IRQHandler ; CAN2 TX
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
DCD CAN2_SE_IRQHandler ; CAN2 SE
DCD ACC_IRQHandler ; ACC
DCD USBFS_MAPH_IRQHandler ; USB Map High
DCD USBFS_MAPL_IRQHandler ; USB Map Low
DCD DMA2_Channel6_7_IRQHandler ; DMA2 Channel6 & Channel7
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
; add for extend sram
IMPORT extend_sram
MOV32 R0, #0x20001000
MOV SP, R0
LDR R0, =extend_sram
BLX R0
MOV32 R0, #0x08000000
LDR SP, [R0]
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDT_IRQHandler [WEAK]
EXPORT PVM_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT CRM_IRQHandler [WEAK]
EXPORT EXINT0_IRQHandler [WEAK]
EXPORT EXINT1_IRQHandler [WEAK]
EXPORT EXINT2_IRQHandler [WEAK]
EXPORT EXINT3_IRQHandler [WEAK]
EXPORT EXINT4_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT DMA1_Channel5_IRQHandler [WEAK]
EXPORT DMA1_Channel6_IRQHandler [WEAK]
EXPORT DMA1_Channel7_IRQHandler [WEAK]
EXPORT ADC1_2_IRQHandler [WEAK]
EXPORT USBFS_H_CAN1_TX_IRQHandler [WEAK]
EXPORT USBFS_L_CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_SE_IRQHandler [WEAK]
EXPORT EXINT9_5_IRQHandler [WEAK]
EXPORT TMR1_BRK_TMR9_IRQHandler [WEAK]
EXPORT TMR1_OVF_TMR10_IRQHandler [WEAK]
EXPORT TMR1_TRG_HALL_TMR11_IRQHandler [WEAK]
EXPORT TMR1_CH_IRQHandler [WEAK]
EXPORT TMR2_GLOBAL_IRQHandler [WEAK]
EXPORT TMR3_GLOBAL_IRQHandler [WEAK]
EXPORT TMR4_GLOBAL_IRQHandler [WEAK]
EXPORT I2C1_EVT_IRQHandler [WEAK]
EXPORT I2C1_ERR_IRQHandler [WEAK]
EXPORT I2C2_EVT_IRQHandler [WEAK]
EXPORT I2C2_ERR_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT USART3_IRQHandler [WEAK]
EXPORT EXINT15_10_IRQHandler [WEAK]
EXPORT RTCAlarm_IRQHandler [WEAK]
EXPORT USBFSWakeUp_IRQHandler [WEAK]
EXPORT TMR8_BRK_IRQHandler [WEAK]
EXPORT TMR8_OVF_IRQHandler [WEAK]
EXPORT TMR8_TRG_HALL_IRQHandler [WEAK]
EXPORT TMR8_CH_IRQHandler [WEAK]
EXPORT SDIO1_IRQHandler [WEAK]
EXPORT TMR5_GLOBAL_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT UART5_IRQHandler [WEAK]
EXPORT DMA2_Channel1_IRQHandler [WEAK]
EXPORT DMA2_Channel2_IRQHandler [WEAK]
EXPORT DMA2_Channel3_IRQHandler [WEAK]
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
EXPORT CAN2_TX_IRQHandler [WEAK]
EXPORT CAN2_RX0_IRQHandler [WEAK]
EXPORT CAN2_RX1_IRQHandler [WEAK]
EXPORT CAN2_SE_IRQHandler [WEAK]
EXPORT ACC_IRQHandler [WEAK]
EXPORT USBFS_MAPH_IRQHandler [WEAK]
EXPORT USBFS_MAPL_IRQHandler [WEAK]
EXPORT DMA2_Channel6_7_IRQHandler [WEAK]
WWDT_IRQHandler
PVM_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FLASH_IRQHandler
CRM_IRQHandler
EXINT0_IRQHandler
EXINT1_IRQHandler
EXINT2_IRQHandler
EXINT3_IRQHandler
EXINT4_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
DMA1_Channel5_IRQHandler
DMA1_Channel6_IRQHandler
DMA1_Channel7_IRQHandler
ADC1_2_IRQHandler
USBFS_H_CAN1_TX_IRQHandler
USBFS_L_CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_SE_IRQHandler
EXINT9_5_IRQHandler
TMR1_BRK_TMR9_IRQHandler
TMR1_OVF_TMR10_IRQHandler
TMR1_TRG_HALL_TMR11_IRQHandler
TMR1_CH_IRQHandler
TMR2_GLOBAL_IRQHandler
TMR3_GLOBAL_IRQHandler
TMR4_GLOBAL_IRQHandler
I2C1_EVT_IRQHandler
I2C1_ERR_IRQHandler
I2C2_EVT_IRQHandler
I2C2_ERR_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
USART3_IRQHandler
EXINT15_10_IRQHandler
RTCAlarm_IRQHandler
USBFSWakeUp_IRQHandler
TMR8_BRK_IRQHandler
TMR8_OVF_IRQHandler
TMR8_TRG_HALL_IRQHandler
TMR8_CH_IRQHandler
SDIO1_IRQHandler
TMR5_GLOBAL_IRQHandler
UART4_IRQHandler
UART5_IRQHandler
DMA2_Channel1_IRQHandler
DMA2_Channel2_IRQHandler
DMA2_Channel3_IRQHandler
DMA2_Channel4_5_IRQHandler
CAN2_TX_IRQHandler
CAN2_RX0_IRQHandler
CAN2_RX1_IRQHandler
CAN2_SE_IRQHandler
ACC_IRQHandler
USBFS_MAPH_IRQHandler
USBFS_MAPL_IRQHandler
DMA2_Channel6_7_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, = (Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END

17
project/at_start_f413/examples/sram/extend_sram/readme.txt
View File

@@ -1,17 +0,0 @@
/**
**************************************************************************
* @file readme.txt
* @brief readme
**************************************************************************
*/
this demo is based on the at-start board, in this demo, the code contains
two project targets. please follow below steps to test.
- step 1:
rebuild all target files.
- step 2:
select target "set_sram_xxk", download. if everything is ok, the led4 will
turn on.
this demo call function extend_sram() when startup.
for details, please refer to the application note document AN0026.

94
project/at_start_f413/examples/sram/extend_sram/src/at32f413_clock.c
View File

@@ -1,94 +0,0 @@
/**
**************************************************************************
* @file at32f413_clock.c
* @brief system clock config program
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
/* includes ------------------------------------------------------------------*/
#include "at32f413_clock.h"
/**
* @brief system clock config program
* @note the system clock is configured as follow:
* system clock (sclk) = hext / 2 * pll_mult
* system clock source = pll (hext)
* - hext = HEXT_VALUE
* - sclk = 192000000
* - ahbdiv = 1
* - ahbclk = 192000000
* - apb2div = 2
* - apb2clk = 96000000
* - apb1div = 2
* - apb1clk = 96000000
* - pll_mult = 48
* - pll_range = GT72MHZ (greater than 72 mhz)
* @param none
* @retval none
*/
void system_clock_config(void)
{
/* reset crm */
crm_reset();
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */
while(crm_hext_stable_wait() == ERROR)
{
}
/* config pll clock resource */
crm_pll_config(CRM_PLL_SOURCE_HEXT_DIV, CRM_PLL_MULT_48, CRM_PLL_OUTPUT_RANGE_GT72MHZ);
/* enable pll */
crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
/* wait till pll is ready */
while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
{
}
/* config ahbclk */
crm_ahb_div_set(CRM_AHB_DIV_1);
/* config apb2clk, the maximum frequency of APB1/APB2 clock is 100 MHz */
crm_apb2_div_set(CRM_APB2_DIV_2);
/* config apb1clk, the maximum frequency of APB1/APB2 clock is 100 MHz */
crm_apb1_div_set(CRM_APB1_DIV_2);
/* enable auto step mode */
crm_auto_step_mode_enable(TRUE);
/* select pll as system clock source */
crm_sysclk_switch(CRM_SCLK_PLL);
/* wait till pll is used as system clock source */
while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
{
}
/* disable auto step mode */
crm_auto_step_mode_enable(FALSE);
/* update system_core_clock global variable */
system_core_clock_update();
}

140
project/at_start_f413/examples/sram/extend_sram/src/at32f413_int.c
View File

@@ -1,140 +0,0 @@
/**
**************************************************************************
* @file at32f413_int.c
* @brief main interrupt service routines.
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
/* includes ------------------------------------------------------------------*/
#include "at32f413_int.h"
/** @addtogroup AT32F413_periph_examples
* @{
*/
/** @addtogroup 413_SRAM_extend_sram
* @{
*/
/**
* @brief this function handles nmi exception.
* @param none
* @retval none
*/
void NMI_Handler(void)
{
}
/**
* @brief this function handles hard fault exception.
* @param none
* @retval none
*/
void HardFault_Handler(void)
{
/* go to infinite loop when hard fault exception occurs */
while(1)
{
}
}
/**
* @brief this function handles memory manage exception.
* @param none
* @retval none
*/
void MemManage_Handler(void)
{
/* go to infinite loop when memory manage exception occurs */
while(1)
{
}
}
/**
* @brief this function handles bus fault exception.
* @param none
* @retval none
*/
void BusFault_Handler(void)
{
/* go to infinite loop when bus fault exception occurs */
while(1)
{
}
}
/**
* @brief this function handles usage fault exception.
* @param none
* @retval none
*/
void UsageFault_Handler(void)
{
/* go to infinite loop when usage fault exception occurs */
while(1)
{
}
}
/**
* @brief this function handles svcall exception.
* @param none
* @retval none
*/
void SVC_Handler(void)
{
}
/**
* @brief this function handles debug monitor exception.
* @param none
* @retval none
*/
void DebugMon_Handler(void)
{
}
/**
* @brief this function handles pendsv_handler exception.
* @param none
* @retval none
*/
void PendSV_Handler(void)
{
}
/**
* @brief this function handles systick handler.
* @param none
* @retval none
*/
void SysTick_Handler(void)
{
}
/**
* @}
*/
/**
* @}
*/

95
project/at_start_f413/examples/sram/extend_sram/src/main.c
View File

@@ -1,95 +0,0 @@
/**
**************************************************************************
* @file main.c
* @brief main program
**************************************************************************
* Copyright notice & Disclaimer
*
* The software Board Support Package (BSP) that is made available to
* download from Artery official website is the copyrighted work of Artery.
* Artery authorizes customers to use, copy, and distribute the BSP
* software and its related documentation for the purpose of design and
* development in conjunction with Artery microcontrollers. Use of the
* software is governed by this copyright notice and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
*
**************************************************************************
*/
#include "at32f413_board.h"
#include "at32f413_clock.h"
#ifdef __cplusplus
extern "C" {
#endif
void extend_sram(void);
#ifdef __cplusplus
}
#endif
/** @addtogroup AT32F413_periph_examples
* @{
*/
/** @addtogroup 413_SRAM_extend_sram SRAM_extend_sram
* @{
*/
/**
* @brief to extend sram size
* @param none
* @retval none
*/
void extend_sram(void)
{
/* check if ram has been set to expectant size, if not, change eopb0 */
if(((USD->eopb0) & 0xFF) != EXTEND_SRAM)
{
flash_unlock();
/* erase user system data bytes */
flash_user_system_data_erase();
/* change sram size */
flash_user_system_data_program((uint32_t)&USD->eopb0, EXTEND_SRAM);
/* system reset */
nvic_system_reset();
}
}
/**
* @brief main function.
* @param none
* @retval none
*/
int main(void)
{
system_clock_config();
at32_board_init();
/* check eopb0 */
if(((USD->eopb0) & 0xFF) == EXTEND_SRAM)
{
at32_led_on(LED4);
}
while(1)
{
}
}
/**
* @}
*/
/**
* @}
*/

8
project/at_start_f413/examples/tmr/6_steps/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/7_pwm_output/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/cascade_synchro/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/complementary_signals/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/dma/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/dma_burst/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/encoder_tmr2/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/external_clock/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/hall_xor_tmr2/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/hang_mode/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/input_capture/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/oc_high/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/oc_low/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/oc_toggle_tmr3/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/oc_toggle_tmr9/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/one_cycle/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/parallel_synchro/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/pwm_input/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/pwm_input_dma/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/pwm_output_simulate/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/pwm_output_tmr10/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/pwm_output_tmr3/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/timer_base/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

8
project/at_start_f413/examples/tmr/tmr1_synchro/inc/at32f413_conf.h
View File

@@ -31,7 +31,7 @@ extern "C" {
#endif
/**
* @brief in the following line adjust the value of high speed exernal crystal (hext)
* @brief in the following line adjust the value of high speed external crystal (hext)
* used in your application
*
* tip: to avoid modifying this file each time you need to use different hext, you
@@ -39,16 +39,16 @@ extern "C" {
*
*/
#if !defined HEXT_VALUE
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed exernal crystal in hz */
#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif
/**
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* @brief in the following line adjust the high speed external crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

Some files were not shown because too many files have changed in this diff Show More