mirror of
https://github.com/ArteryTek/AT32F415_Firmware_Library.git
synced 2026-05-21 01:12:20 +00:00
update version to v2.1.0
This commit is contained in:
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
|
||||
FreeRTOS V10.4.3 - Copyright (C) 2020 Real Time Engineers Ltd.
|
||||
All rights reserved
|
||||
|
||||
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
|
||||
@@ -93,7 +93,7 @@
|
||||
|
||||
#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
|
||||
#include <stdint.h>
|
||||
static uint32_t systemcoreclock = 144000000;
|
||||
#include "system_at32f415.h"
|
||||
#endif
|
||||
|
||||
|
||||
@@ -109,59 +109,59 @@
|
||||
*
|
||||
* See http://www.freertos.org/a00110.html.
|
||||
*----------------------------------------------------------*/
|
||||
#define configUSE_PREEMPTION 1
|
||||
#define configUSE_IDLE_HOOK 0
|
||||
#define configUSE_TICK_HOOK 0
|
||||
#define configCPU_CLOCK_HZ ( ( unsigned long ) systemcoreclock )
|
||||
#define configTICK_RATE_HZ ( ( TickType_t ) 1000 )
|
||||
#define configMAX_PRIORITIES ( 5 )
|
||||
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 128 )
|
||||
#define configUSE_PREEMPTION 1
|
||||
#define configUSE_IDLE_HOOK 0
|
||||
#define configUSE_TICK_HOOK 0
|
||||
#define configCPU_CLOCK_HZ ( ( unsigned long ) system_core_clock )
|
||||
#define configTICK_RATE_HZ ( ( TickType_t ) 1000 )
|
||||
#define configMAX_PRIORITIES ( 5 )
|
||||
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 128 )
|
||||
#define configSUPPORT_DYNAMIC_ALLOCATION 1
|
||||
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 8 * 1024 ) )
|
||||
#define configMAX_TASK_NAME_LEN ( 16 )
|
||||
#define configUSE_16_BIT_TICKS 0
|
||||
#define configIDLE_SHOULD_YIELD 1
|
||||
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 8 * 1024 ) )
|
||||
#define configMAX_TASK_NAME_LEN ( 16 )
|
||||
#define configUSE_16_BIT_TICKS 0
|
||||
#define configIDLE_SHOULD_YIELD 1
|
||||
|
||||
|
||||
/* Co-routine definitions. */
|
||||
#define configUSE_CO_ROUTINES 0
|
||||
#define configUSE_CO_ROUTINES 0
|
||||
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
|
||||
|
||||
/* Set the following definitions to 1 to include the API function, or zero
|
||||
to exclude the API function. */
|
||||
|
||||
#define INCLUDE_vTaskPrioritySet 1
|
||||
#define INCLUDE_uxTaskPriorityGet 1
|
||||
#define INCLUDE_vTaskDelete 1
|
||||
#define INCLUDE_vTaskCleanUpResources 0
|
||||
#define INCLUDE_vTaskSuspend 1
|
||||
#define INCLUDE_vTaskDelayUntil 1
|
||||
#define INCLUDE_vTaskDelay 1
|
||||
#define INCLUDE_vTaskPrioritySet 1
|
||||
#define INCLUDE_uxTaskPriorityGet 1
|
||||
#define INCLUDE_vTaskDelete 1
|
||||
#define INCLUDE_vTaskCleanUpResources 0
|
||||
#define INCLUDE_vTaskSuspend 1
|
||||
#define INCLUDE_vTaskDelayUntil 1
|
||||
#define INCLUDE_vTaskDelay 1
|
||||
#define INCLUDE_xTaskGetCurrentTaskHandle 1
|
||||
/* Cortex-M specific definitions. */
|
||||
#ifdef __NVIC_PRIO_BITS
|
||||
/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
|
||||
#define configPRIO_BITS __NVIC_PRIO_BITS
|
||||
/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
|
||||
#define configPRIO_BITS __NVIC_PRIO_BITS
|
||||
#else
|
||||
#define configPRIO_BITS 4 /* 15 priority levels */
|
||||
#define configPRIO_BITS 4 /* 15 priority levels */
|
||||
#endif
|
||||
|
||||
/* The lowest interrupt priority that can be used in a call to a "set priority"
|
||||
function. */
|
||||
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0x0f
|
||||
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0x0f
|
||||
|
||||
/* The highest interrupt priority that can be used by any interrupt service
|
||||
routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
|
||||
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
|
||||
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
|
||||
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 0x01
|
||||
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 0x01
|
||||
|
||||
/* Interrupt priorities used by the kernel port layer itself. These are generic
|
||||
to all Cortex-M ports, and do not rely on any particular library functions. */
|
||||
#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
|
||||
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||
|
||||
/* Normal assert() semantics without relying on the provision of an assert.h
|
||||
header file. */
|
||||
|
||||
Reference in New Issue
Block a user