ArteryTek/AT32F415_Firmware_Library
1
0
Fork 0
mirror of https://github.com/ArteryTek/AT32F415_Firmware_Library.git synced 2026-05-21 01:12:20 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

update version to v2.0.9

Browse Source
This commit is contained in:
Artery-MCU
2023-02-28 12:59:38 +08:00
parent d4910499d3
commit d7bcb64bf8
539 changed files with 3073 additions and 5986 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
AT32F415_periph_lib_V2.0.8.chm → AT32F415_periph_lib_V2.0.9.chm
View File

Binary file not shown.

BIN
document/AT32F415固件库BSP&Pack应用指南.pdf
View File

Binary file not shown.

BIN
document/ReleaseNotes_AT32F415_Firmware_Library.pdf
View File

Binary file not shown.

2
libraries/cmsis/cm4/device_support/at32f415.h
View File

@@ -104,7 +104,7 @@ extern "C" {
*/
#define __AT32F415_LIBRARY_VERSION_MAJOR (0x02) /*!< [31:24] major version */
#define __AT32F415_LIBRARY_VERSION_MIDDLE (0x00) /*!< [23:16] middle version */
#define __AT32F415_LIBRARY_VERSION_MINOR (0x08) /*!< [15:8] minor version */
#define __AT32F415_LIBRARY_VERSION_MINOR (0x09) /*!< [15:8] minor version */
#define __AT32F415_LIBRARY_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __AT32F415_LIBRARY_VERSION ((__AT32F415_LIBRARY_VERSION_MAJOR << 24) | \
(__AT32F415_LIBRARY_VERSION_MIDDLE << 16) | \

5
libraries/cmsis/cm4/device_support/at32f415_conf_template.h
View File

@@ -45,8 +45,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

2
libraries/drivers/inc/at32f415_flash.h
View File

@@ -139,7 +139,7 @@ extern "C" {
* - FLASH_WAIT_CYCLE_3
* - FLASH_WAIT_CYCLE_4
*/
#define flash_psr_set(wtcyc) (FLASH->psr = (uint32_t)(0x150 | wtcyc))
#define flash_psr_set(wtcyc) (FLASH->psr = (uint32_t)(0x10 | wtcyc))
/** @defgroup FLASH_exported_types
* @{

2
libraries/drivers/inc/at32f415_tmr.h
View File

@@ -236,7 +236,7 @@ typedef enum
{
TMR_CC_CHANNEL_MAPPED_DIRECT = 0x01, /*!< channel is configured as input, mapped direct */
TMR_CC_CHANNEL_MAPPED_INDIRECT = 0x02, /*!< channel is configured as input, mapped indirect */
TMR_CC_CHANNEL_MAPPED_STI = 0x03 /*!< channel is configured as input, mapped trc */
TMR_CC_CHANNEL_MAPPED_STI = 0x03 /*!< channel is configured as input, mapped sti */
} tmr_input_direction_mapped_type;
/**

8
libraries/drivers/src/at32f415_ertc.c
View File

@@ -320,7 +320,7 @@ error_status ertc_date_set(uint8_t year, uint8_t month, uint8_t date, uint8_t we
return ERROR;
}
/* Set the ertc_DR register */
/* set the ertc_date register */
ERTC->date = reg.date;
/* exit init mode */
@@ -1470,13 +1470,7 @@ void ertc_bpr_data_write(ertc_dt_type dt, uint32_t data)
reg = ERTC_BASE + 0x50 + (dt * 4);
/* disable write protection */
ertc_write_protect_disable();
*(__IO uint32_t *)reg = data;
/* enable write protection */
ertc_write_protect_enable();
}
/**

1
middlewares/usb_drivers/src/usbd_sdr.c
View File

@@ -156,6 +156,7 @@ static usb_sts_type usbd_set_address(usbd_core_type *udev)
else
{
udev->device_addr = dev_addr;
usbd_set_device_addr(udev, udev->device_addr);
if(dev_addr != 0)
{

32
middlewares/usb_drivers/src/usbh_ctrl.c
View File

@@ -159,6 +159,7 @@ usb_sts_type usbh_ctrl_setup_wait_handler(usbh_core_type *uhost, uint32_t *timeo
uhost->ctrl.state = CONTROL_STATUS_IN;
}
}
uhost->ctrl.timer = uhost->timer;
status = USB_OK;
}
else if(urb_state == URB_ERROR || urb_state == URB_NOTREADY)
@@ -279,15 +280,13 @@ usb_sts_type usbh_ctrl_data_out_wait_handler(usbh_core_type *uhost, uint32_t tim
{
uhost->ctrl.state = CONTROL_DATA_OUT;
}
else
/* wait nak timeout 5s*/
if((uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) && (urb_state == URB_NOTREADY))
{
/* wait nak timeout 5s*/
if(uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT)
{
uhost->ctrl.state = CONTROL_ERROR;
uhost->ctrl.sts = CTRL_XACTERR;
status = USB_ERROR;
}
uhost->ctrl.state = CONTROL_ERROR;
uhost->ctrl.sts = CTRL_XACTERR;
status = USB_ERROR;
}
return status;
}
@@ -388,15 +387,12 @@ usb_sts_type usbh_ctrl_status_out_wait_handler(usbh_core_type *uhost, uint32_t t
{
uhost->ctrl.state = CONTROL_STATUS_OUT;
}
else
/* wait nak timeout 5s*/
if((uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) && (urb_state == URB_NOTREADY))
{
/* wait nak timeout 5s*/
if(uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT)
{
uhost->ctrl.state = CONTROL_ERROR;
uhost->ctrl.sts = CTRL_XACTERR;
status = USB_ERROR;
}
uhost->ctrl.state = CONTROL_ERROR;
uhost->ctrl.sts = CTRL_XACTERR;
status = USB_ERROR;
}
return status;
}
@@ -468,7 +464,6 @@ usb_sts_type usbh_ctrl_transfer_loop(usbh_core_type *uhost)
case CONTROL_DATA_IN:
usbh_ctrl_data_in_handler(uhost);
uhost->ctrl.timer = uhost->timer;
break;
case CONTROL_DATA_IN_WAIT:
@@ -477,7 +472,6 @@ usb_sts_type usbh_ctrl_transfer_loop(usbh_core_type *uhost)
case CONTROL_DATA_OUT:
usbh_ctrl_data_out_handler(uhost);
uhost->ctrl.timer = uhost->timer;
break;
case CONTROL_DATA_OUT_WAIT:
@@ -486,7 +480,6 @@ usb_sts_type usbh_ctrl_transfer_loop(usbh_core_type *uhost)
case CONTROL_STATUS_IN:
usbh_ctrl_status_in_handler(uhost);
uhost->ctrl.timer = uhost->timer;
break;
case CONTROL_STATUS_IN_WAIT:
@@ -495,7 +488,6 @@ usb_sts_type usbh_ctrl_transfer_loop(usbh_core_type *uhost)
case CONTROL_STATUS_OUT:
usbh_ctrl_status_out_handler(uhost);
uhost->ctrl.timer = uhost->timer;
break;
case CONTROL_STATUS_OUT_WAIT:

5
project/at_start_f415/examples/adc/current_vref_value_check/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/current_vref_value_check/mdk_v5/current_vref_value_check.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/current_vref_value_check/mdk_v5/current_vref_value_check.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/current_vref_value_check/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/adc/exint_trigger_partitioned/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/exint_trigger_partitioned/mdk_v5/exint_trigger_partitioned.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/exint_trigger_partitioned/mdk_v5/exint_trigger_partitioned.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -488,6 +488,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/exint_trigger_partitioned/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/adc/internal_temperature_sensor/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/internal_temperature_sensor/mdk_v5/internal_temperature_sensor.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/internal_temperature_sensor/mdk_v5/internal_temperature_sensor.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/internal_temperature_sensor/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/adc/repeat_conversion_loop_transfer/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/repeat_conversion_loop_transfer/mdk_v5/repeat_conversion_loop_transfer.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/repeat_conversion_loop_transfer/mdk_v5/repeat_conversion_loop_transfer.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/repeat_conversion_loop_transfer/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/adc/software_trigger_repeat/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/software_trigger_repeat/mdk_v5/software_trigger_repeat.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/software_trigger_repeat/mdk_v5/software_trigger_repeat.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/software_trigger_repeat/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/adc/tmr_trigger_automatic_preempted/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/tmr_trigger_automatic_preempted/mdk_v5/tmr_trigger_automatic_preempted.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/tmr_trigger_automatic_preempted/mdk_v5/tmr_trigger_automatic_preempted.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -488,6 +488,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/tmr_trigger_automatic_preempted/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/adc/voltage_monitoring/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/adc/voltage_monitoring/mdk_v5/voltage_monitoring.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/adc/voltage_monitoring/mdk_v5/voltage_monitoring.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/adc/voltage_monitoring/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/can/communication_mode/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/can/communication_mode/mdk_v5/communication_mode.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/can/communication_mode/mdk_v5/communication_mode.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/can/communication_mode/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/can/filter/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/can/filter/mdk_v5/filter.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/can/filter/mdk_v5/filter.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/can/filter/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/can/loopback_mode/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/can/loopback_mode/mdk_v5/loopback_mode.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/can/loopback_mode/mdk_v5/loopback_mode.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/can/loopback_mode/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/cmp/deep_sleep_mode/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/cmp/deep_sleep_mode/mdk_v5/deep_sleep_mode.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/cmp/deep_sleep_mode/mdk_v5/deep_sleep_mode.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -488,6 +488,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/cmp/deep_sleep_mode/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/cmp/output/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/cmp/output/mdk_v5/output.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/cmp/output/mdk_v5/output.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/cmp/output/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/cortex_m4/bit_band/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/cortex_m4/bit_band/mdk_v5/bit_band.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/cortex_m4/bit_band/mdk_v5/bit_band.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/cortex_m4/bit_band/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/cortex_m4/cmsis_dsp/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/cortex_m4/cmsis_dsp/mdk_v5/cmsis_dsp.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/cortex_m4/cmsis_dsp/mdk_v5/cmsis_dsp.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -543,6 +543,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/cortex_m4/cmsis_dsp/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/cortex_m4/systick_interrupt/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/cortex_m4/systick_interrupt/mdk_v5/systick_interrupt.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/cortex_m4/systick_interrupt/mdk_v5/systick_interrupt.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/cortex_m4/systick_interrupt/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/crc/calculation/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/crc/calculation/mdk_v5/calculation.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/crc/calculation/mdk_v5/calculation.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -478,6 +478,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/crc/calculation/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/crm/clock_failure_detection/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/crm/clock_failure_detection/mdk_v5/clock_failure_detection.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/crm/clock_failure_detection/mdk_v5/clock_failure_detection.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/crm/clock_failure_detection/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

6
project/at_start_f415/examples/crm/clock_failure_detection/src/main.c
View File

@@ -107,12 +107,12 @@ void clock_failure_detection_handler(void)
*/
static void sclk_144m_hick_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HICK, TRUE);
/* wait till hick is ready */

5
project/at_start_f415/examples/crm/pll_config2/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/crm/pll_config2/mdk_v5/pll_config2.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/crm/pll_config2/mdk_v5/pll_config2.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/crm/pll_config2/src/at32f415_clock.c
View File

@@ -47,12 +47,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/crm/sysclk_switch/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/crm/sysclk_switch/mdk_v5/sysclk_switch.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/crm/sysclk_switch/mdk_v5/sysclk_switch.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -473,6 +473,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/crm/sysclk_switch/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

12
project/at_start_f415/examples/crm/sysclk_switch/src/main.c
View File

@@ -104,12 +104,12 @@ static void switch_system_clock(void)
*/
static void sclk_64m_hick_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_1);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_1);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HICK, TRUE);
/* wait till hick is ready */
@@ -181,12 +181,12 @@ static void sclk_64m_hick_config(void)
*/
static void sclk_96m_hext_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_2);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_2);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/debug/tmr1/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/debug/tmr1/mdk_v5/tmr1.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/debug/tmr1/mdk_v5/tmr1.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/debug/tmr1/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/dma/data_to_gpio_flexible/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/dma/data_to_gpio_flexible/mdk_v5/data_to_gpio_flexible.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/dma/data_to_gpio_flexible/mdk_v5/data_to_gpio_flexible.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/dma/data_to_gpio_flexible/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

5
project/at_start_f415/examples/dma/flash_to_sram/inc/at32f415_conf.h
View File

@@ -44,8 +44,9 @@ extern "C" {
* @brief in the following line adjust the high speed exernal crystal (hext) startup
* timeout value
*/
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */
#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed exernal clock in hz */
/* module define -------------------------------------------------------------*/
#define CRM_MODULE_ENABLED

4
project/at_start_f415/examples/dma/flash_to_sram/mdk_v5/flash_to_sram.uvoptx
View File

@@ -10,9 +10,9 @@
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj; *.o</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc; *.md</tExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp; *.cc; *.cxx</CppX>
<CppX>*.cpp</CppX>
<nMigrate>0</nMigrate>
</Extensions>

7
project/at_start_f415/examples/dma/flash_to_sram/mdk_v5/flash_to_sram.uvprojx
View File

@@ -16,7 +16,7 @@
<TargetCommonOption>
<Device>-AT32F415RCT7</Device>
<Vendor>ArteryTek</Vendor>
<PackID>ArteryTek.AT32F415_DFP.2.0.6</PackID>
<PackID>ArteryTek.AT32F415_DFP.2.0.0</PackID>
<Cpu>IRAM(0x20000000,0x8000) IROM(0x08000000,0x40000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile></StartupFile>
@@ -483,6 +483,11 @@
<Layers>
<Layer>
<LayName>&lt;Project Info&gt;</LayName>
<LayDesc></LayDesc>
<LayUrl></LayUrl>
<LayKeys></LayKeys>
<LayCat></LayCat>
<LayLic></LayLic>
<LayTarg>0</LayTarg>
<LayPrjMark>1</LayPrjMark>
</Layer>

6
project/at_start_f415/examples/dma/flash_to_sram/src/at32f415_clock.c
View File

@@ -45,12 +45,12 @@
*/
void system_clock_config(void)
{
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
/* reset crm */
crm_reset();
/* config flash psr register */
flash_psr_set(FLASH_WAIT_CYCLE_4);
crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
/* wait till hext is ready */

Some files were not shown because too many files have changed in this diff Show More